Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

MIDLAND-ACS

PNEUMATIC PRODUCT GUIDE

MIDLAND-ACS
PNEUMATIC
PRODUCT GUIDE

DIRECT ACTING, ANCILLARIES

AIR SERVICE, SPOOL, POPPET, FLUOSLIDE,

AIR SERVICE UNITS 3500/3550 SERIES

SPOOL VALVES 1500/1600 SERIES

POPPET VALVES 1750 SERIES

FLUOSLIDE DIRECTIONAL
CONTROL VALVES 1800 SERIES

DIRECT ACTING VALVES 1750 SERIES

ANCILLARY VALVES 4500 SERIES

www.midland-acs.com
IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

3550 Air Service Units

FILTER REGULATORS • 1/4”, 1/2”, 3/4”, NPT (BSP) 3550 SERIES
3550

SELF RELIEVING • NON RELIEVING

General Description Technical Data

A 316 Stainless Steel combination Ports NPT (BSP option available)
unit for filtration and pressure • 1/4", 1/2", 3/4"
Gauge Ports (BSP option available)
regulation of compressed air for the
offshore, food, pharmaceutical and • 1/8" NPT
AIR PREPARATION

allied industries. • 1/4" NPT (option available)

• 316 Stainless Steel throughout. Relief/Vent Port
• 1/8" NPT (Fitted with bug screen)
• Large flow paths Working Temperature
minimise pressure drop. Ambient temperature
• Rolling diaphragm design. • -20ºC to +80ºC (-4ºF to +176ºF)
• Precision adjustment. Low temperature version
• -50ºC (-58ºF ) (optional)
Filter Unit Maximum Inlet Pressure
Large 40 micron standard element • Manual drain - 20 bar (290 psi)
with manual or automatic drain for • Automatic drain - 17 bar (247 psi)
the removal of liquids and solids. Regulated Pressure
• 0.50 to 2 bar (7.2 to 29 psi)
Operating Medium • 0.50 to 4 bar (7.2 to 58 psi) Construction Materials
Gases, air, inert gas, sweet • 0.50 to 8 bar (7.2 to 116 psi) • Body/Bonnet/Bowl and Internals
(natural) and sour gases. • 0.50 to 12 bar (7.2 to 174 psi) Stainless Steel AISI 316 S11
Maximum Relief Flow
to NACE MR-0175
Ingress Protection at 2 bar (29psi) secondary pressure
• 0.5cc/sec (0.03 cu in/sec) • 40 Micron 316 Stainless Steel
Heavy seas/on deck rating.
Bowl Retention Capacity (5 & 25 Micron option) Element
• 21cc (1.28cu ins) • Fluoroelastomer and 316
Functional Symbols
Flow capacity Stainless Steel Diaphragm and
Self relieving Non relieving
10 bar (145 psi) inlet pressure, Valve Assembly
6 bar (87 psi) secondary pressure • Inconel X750 Valve Spring
with 1 bar (14.5 psi) pressure drop
• 316 Stainless Steel
• 1/4" - 3720 L/min (130 SCFM)
• 1/2" - 600 L/min (212 SCFM) Adjustment Spring
Cv (Kv) • Fluoroelastomer Seals
• 1/4" - 2.4 (34.0) • Acetal resin, stainless steel and
• 1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0) Buna N Auto drain

Preferred Models Flow Characteristics

Conform to ISO6953-2:2000
Model Number Description Weight kg (lbs)

Self Relieving
2FRMSV**2A+ 1/4”NPT Filter regulator, manual drain 1.75 (3.86)
2FRASV**2A+ 1/4”NPT Filter regulator, automatic drain 2.05 (4.52)
4FRMSV**2A+ 1/2”NPT Filter regulator, manual drain 1.75 (3.86)
4FRASV**2A+ 1/2”NPT Filter regulator, automatic drain 2.05 (4.52)
6FRMSV**2A+ 3/4”NPT Filter regulator, manual drain 1.95 (4.30)
6FRASV**2A+ 3/4”NPT Filter regulator, automatic drain 2.25 (4.96)
Non Relieving
Specify model code ‘FRN’ in place of ‘FRM’ for manual drain versions.
Specify model code ‘FRB’ in place of ‘FRA’ for manual drain versions.
** For regulated pressure add code:
0.50 to 2 bar (7.2 to 29 psi) -code 02
0.50 to 4 bar (7.2 to 58 psi) -code 04
0.50 to 8 bar (7.2 to 116 psi) -code 08
0.50 to 12 bar (7.2 to 174 psi) - code 12
+ For 5 micron element add 05 to model number
For BSP replace ‘2’ in position 9 with ‘1’
For 1/4” gauge port add ‘X’ to end of model number

www.midland-acs.com
3550.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

3550 Air Service Units

FILTER REGULATORS • 1/4”, 1/2”, 3/4”, NPT (BSP) 3550 SERIES

3550
SELF RELIEVING • NON RELIEVING
INSTALLATION DIMENSIONS mm (inches)

Filter Regulators - Self Relieving and Non Relieving with Filter Regulators - Self Relieving and Non Relieving with
Manual Drain Auto Drain

AIR PREPARATION
2FRMSV**2A Optional 2FRASV**2A Optional
4FRMSV**2A Plastic 4FRASV**2A Plastic
6FRMSV**2A Handwheel 6FRASV**2A Handwheel

Relief/Vent Relief/Vent
port R port R

2 Gauge 2 Gauge
A A 8 Mounting ports G
8 Mounting ports G
holes øF holes øF 8 Cap
8 Cap
screws øK screws øK

øL E øL
E

B 2 ports P B 2 ports P

H H

D D

J J

E E

C C

Model Number Ports P Ports G Port R A B C D E F H J K L

With manual drain
2FRMSV**2A 1/4” NPT 1/8” NPT 1/8” NPT 123.5 104 55 67 24 M4 155 - - -
1/4” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) (2.64) (0.94) M4 (6.10) - - -
4FRMSV**2A 1/2” NPT 1/8” NPT 1/8” NPT 123.5 104 55 67 28 M5 155 - - -
1/2” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) (2.64) (1.10) M5 (6.10) - - -
6FRMSV**2A 3/4” NPT 1/8” NPT 1/8” NPT 123.5 104 55 - 28 - 155 117 M5 30
3/4” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) - (1.10) - (6.10) (4.61) M5 (1.18)
With automatic drain
2FRASV**2A 1/4” NPT 1/8” NPT 1/8” NPT 123.5 141.50 55 67 24 M4 192.50 - - -
1/4” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) (2.64) (0.94) M4 (6.10) - - -
4FRASV**2A 1/2” NPT 1/8” NPT 1/8” NPT 123.5 141.50 55 67 28 M5 192.50 - - -
1/2” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) (2.64) (1.10) M5 (6.10) - - -
6FRASV**2A 3/4” NPT 1/8” NPT 1/8” NPT 123.5 141.50 55 - 28 - 192.50 117 M5 30
3/4” NPT 1/8” NPT 1/8” NPT (4.86) (4.09) (2.17) - (1.10) - (6.10) (4.61) M5 (1.18)
Dimensions for non relieving models are same as self relieving models above.
Dimension H = clearance required below pipe centerline to enable bowl removal.
For optional handwheel, tamper proof cap, gauges and mounting accessories see details on page 3550.6

www.midland-acs.com

3550.2 IN CONTROL 11/05

Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

3550 Filters
1/4”, 1/2”, 3/4”, NPT (BSP) 3550 SERIES
3550

General Description Technical Data

A 316 Stainless Steel filter for Ports NPT (BSP option available)
filtration of compressed air in • 1/4", 1/2", 3/4"
Gauge Ports (BSP option available)
the offshore, food, pharmaceutical
• 1/8" NPT
and allied industries.
• 1/4" NPT (option available)
AIR PREPARATION

Automatic Drain Port

Large 40 micron standard element • 1/8" NPT
with manual or automatic drain for Working Pressure
the removal of liquids and solids • Manual drain 20 bar (290 psi)
• 316 Stainless Steel throughout. • Automatic drain 17 bar (247 psi)
• Large flow paths minimise Working Temperature
pressure drop. Ambient temperature
• -20ºC to +80ºC (-4ºF to +176ºF)
• Large stainless steel element.
Low temperature version
• -50ºC (-58ºF ) (optional)
Operating Medium Bowl retention capacity
Gases, air, inert gas, sweet • 21cc (1.28 cu ins)
(natural) and sour gases. Construction Materials
Flow Capacity
• Body/Bonnet/Bowl and Internals
Ingress Protection At 7 bar (102 psi) supply pressure,
Stainless Steel AISI 316 S11
Heavy seas/on deck rating 0.35 bar (5 psi) pressure drop
to NACE MR-0175
• 1/4" - 1380 L/min (49 SCFM)
• 40 micron 316 Stainlesss steel
Functional Symbols • 1/2" - 2940 L/min (104 SCFM)
(5 and 225 micron option) element
Cv (Kv)
Filter with Filter with • Fluoroelastomer Seals
manual drain automatic drain • 1/4" - 2.4 (34.0)
• 1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0)

Preferred Models
Model Number Description Weight kg (lbs)
2FLMSV202A+ 1/4”NPT Filter with manual drain 1.30 (2.86)
2FLASV172A+ 1/4”NPT Filter with automatic drain 1.60 (3.53)
4FLMSV202A+ 1/2”NPT Filter with manual drain 1.30 (2.86)
4FLASV172A+ 1/2”NPT Filter with automatic drain 1.60 (3.53)
6FLMSV202A+ 3/4”NPT Filter with manual drain 1.50 (3.31)
6FLASV172A+ 3/4”NPT Filter with automatic drain 1.80 (3.97)
+ For 5 micron element add 05 to model number
+ For 25 micron element add 25 to model number Flow Characteristics
For BSP replace ‘2’ in position 9 with ‘1’
Conform to ISO6953-2:2000
For 1/4” gauge port add ‘X’ to end of model number 1/4” & 1/2” FILTER

SSBF 433 & SSBF233

FILTERS

Air Flow Rate dm3/s, ANR

www.midland-acs.com
3550.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

3550 Filters
INSTALLATION DIMENSIONS • 1/4”, 1/2, 3/4, NPT (BSP) 1500 SERIES

3550
INSTALLATION DIMENSIONS mm (inches)

Filters with Manual Drain Filters with Automatic Drain

2FLMSV202A 2FLASV172A
4FLMSV202A 4FLASV172A
6FLMSV202A 6FLASV172A

PNEUMATIC VALVES
E

A A
øL E E

øL
D

øL

Model Number Ports P Ports G A B C D E F H J K L

With manual drain
2FLMSV202A 1/4”NPT 1/8”NPT 31.2 104.5 55 67 24 M4 155 - - -
1/4”NPT 1/8”NPT (1.12) (4.09) (2.17) (2.64) (0.94) M4 (6.10) - - -
4FLMSV202A 1/2”NPT 1/8”NPT 31.2 104.5 55 67 28 M5 155 - - -
1/2”NPT 1/8”NPT (1.12) (4.09) (2.17) (2.64) (1.10) M5 (6.10) - - -
6FLMSV202A 3/4”NPT 1/8”NPT 31.2 104.5 55 - 28 - 155 117 M5 30
3/4”NPT 1/8”NPT (1.12) (4.09) (2.17) - (2.64) - (6.10) (4.61) M5 (1.18)
With automatic drain
2FLASV172A 1/4”NPT 1/8”NPT 31.2 164.5 55 67 24 M4 215.5 - - -
1/4”NPT 1/8”NPT (1.12) (6.47) (2.17) (2.64) (0.94) M4 (8.48) - - -
4FLASV172A 1/2”NPT 1/8”NPT 31.2 164.5 55 67 28 M5 215.5 - - -
1/2”NPT 1/8”NPT (1.12) (6.47) (2.17) (2.64) (1.10) M5 (8.48) - - -
6FLASV172A 3/4”NPT 1/8”NPT 31.2 164.5 55 - 28 - 215.5 117 M5 30
3/4”NPT 1/8”NPT (1.12) (6.47) (2.17) - (1.10) - (8.48) (4.61) M5 (1.18)
Dimension H = clearance required below pipe centerline to enable bowl removal.
For mounting accessories see details on page 3500.6

www.midland-acs.com
3550.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

3550 Air Service Units

PRESSURE REGULATORS • 1/4”, 1/2”, 3/4”, NPT (BSP) 3550 SERIES
3550

SELF RELIEVING • NON RELIEVING

General Description Technical Data
A 316 Stainless Steel pressure Ports NPT (BSP option available)
regulator for pressure regulation • 1/4", 1/2", 3/4"
Gauge Ports (BSP option available)
of compressed gases for the
• 1/8" NPT
offshore, food, pharmaceutical
AIR PREPARATION

• 1/4" NPT (option available)

and allied industries. Relief/Vent Port
• 1/8" NPT (Fitted with bug screen)
• 316 Stainless Steel throughout. Maximum Inlet Pressure
• Large flow characteristics. • 20 bar (290 psi)
• Rolling diaphragm design. Regulated Pressure
• High relief flow. • 0.50 to 2 bar (7.2 to 29 psi)
• 0.50 to 4 bar (7.2 to 58 psi)
• Precision adjustment. • 0.50 to 8 bar (7.2 to 116 psi)
• Full range of accessories • 0.50 to 12 bar (7.2 to 174 psi)
Maximum Relief Flow
at 2 bar (29psi) secondary pressure
Operating Medium • 0.5cc/sec (0.03 cu in/sec)
Gases, air, inert gas, sweet Working Temperature
Ambient temperature Construction Materials
(natural) and sour gases.
• -20ºC to +80ºC (-4ºF to +176ºF) • Body/Bonnet/Bowl and Internals
Ingress Protection Low temperature version Stainless Steel AISI 316 S11
Heavy seas/on deck rating • -50ºC (-58ºF ) (optional) to NACE MR-01-75
contact customer services for details • Fluoroelastomer and 316
Functional Symbols Flow Capacity Stainless Steel Diaphragm
10 bar (145 psi) inlet pressure, and Valve Assembly
Self relieving Non relieving
6 bar (87 psi) secondary pressure • Inconel X750 Valve spring
with 1 bar (14.5 psi) pressure drop
• Fluoroelastomer Seals
• 1/4" - 3720 L/min (130 SCFM)
• 1/2" - 6000 L/min (212 SCFM) • 316 Stainless Steel
Cv (Kv) Adjustment Spring
• 1/4" - 2.4 (34.0)
• 1/2" - 4.6 (65.5) 3/4" - 5.2 (74.0)

Preferred Models Flow Characteristics

Model Number Description Weight kg (lbs) Conform to ISO6953-2:2000

Self Relieving
2PRVSV**2A 1/4”NPT Pressure Regulator 1.60 (3.53)
4PRVSV**2A 1/2”NPT Pressure Regulator 1.60 (3.53)
6PRVSV**2A 3/4”NPT Pressure Regulator 1.80 (3.97)
Non Relieving
2PRNSV**2 1/4”NPT Pressure Regulator 1.60 (3.53)
4PRNSV**2 1/2”NPT Pressure Regulator 1.60 (3.53)
6PRNSV**2A 3/4”NPT Pressure Regulator 1.80 (3.97)
** For regulated pressure add code:
0.50 to 2 bar (7.2 to 29 psi) -code 02
0.50 to 4 bar (7.2 to 58 psi) -code 04
0.50 to 8 bar (7.2 to 116 psi) -code 08
0.50 to 12 bar (7.2 to 116 psi) -code 12
- For BSP replace ‘2’ in position 9 with ‘1’
For 1/4” gauge port add ‘X’ to end of model number

www.midland-acs.com

3550.5 IN CONTROL 11/05

Midland-STANDARD-A4 11/15/05 8:49 AM Page 6

3550 Air Service Units

PRESSURE REGULATORS • 1/4”, 1/2”, 3/4”, NPT (BSP) 3550 SERIES

3550
SELF RELIEVING • NON RELIEVING
INSTALLATION DIMENSIONS mm (inches)
Pressure Regulators - Self Relieving and Non Relieving
2PRVSV**2A 2PRNSV**2A Optional
4PRVSV**2A 4PRNSV**2A Plastic
Handwheel

AIR PREPARATION
6PRVSV**2A 6PRNSV**2A

Relief/Vent
port R

A
8 Mounting 2 Gauge
holes øF ports G
8 Cap
screws øK

E øL

2 ports P

E D

C J

Model Number Ports P Ports G Port R A B C D E F J K L

2PRVSV**2A 1/4” NPT 1/8” NPT 1/8” NPT 123.5 64 55 67 24 M4 - - -
1/4” NPT 1/8” NPT 1/8” NPT (4.86) (2.52) (2.17) (2.64) (0.94) M4 - - -
4PRVSV**2A 1/2” NPT 1/8” NPT 1/8” NPT 123.5 64 55 67 28 M5 - - -
1/2” NPT 1/8” NPT 1/8” NPT (4.86) (2.52) (2.17) (2.64) (1.10) M5 - - -
6PRVSV**2A 3/4” NPT 1/8” NPT 1/8” NPT 123.5 64 55 - 28 - 117 M5 30
3/4” NPT 1/8” NPT 1/8” NPT (4.86) (2.52) (2.17) - (1.10) - (4.61) M5 (1.18)
Dimensions for non relieving models are same as self relieving models above.

ACCESSORIES
Mounting Bracket Stud Mounting Kit Plastic Handwheel Kit
Mounting bracket kit 2 Mounting Slots
L wide x M long
A Stud mounting kit Plastic handwheel kit
complete with fixing screws SSBF238-21 SSAF238-23
C 38 (1.50)
D
1/8” BSP

SSF2110-7S
6 (0.24) a/f 38 (1.18)
(for 1/4” units-short) øH
M8

ø44
(1.73)
SSF2110-7 K E B
(for 1/4” units-long)
4 (0.16)
SSF4110-7 E
4 Mounting Panel Thickness
(for 1/2” and 3/4” units) J Holes øF

Model Number A B C D E Pressure Gauge

SSF2110-7S 79(3.11) 100(3.94) 25(0.98) 60(2.36) 24(0.94) 50mm pressure gauge - glycerine filled SSF153N/2GLY(0-2 bar)
SSF153N/11GLY (0-11 bar) SSF153N/16GLY(0-16 bar)
SSF2110-7 95(3.74) 100(3.94) 25(0.98) 76(2.99) 24(0.94) SSF153N/4GLY(0-4 bar)
SSF4110-7 95(3.74) 100(3.94) 25(0.98) 76(2.99) 28(1.10)
Thread
J K 1/8” NPT

14(0.55) 80(3.15) 47.5

(1.87)
14(0.55) 80(3.15) ø50
(1.97)

14(0.55) 80(3.15)

www.midland-acs.com
3550.6 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

3500 Air Service Units

HIGH FLOW AIR SERVICE EQUIPMENT • 3/4”, 1”, NPT (BSP) 3500 SERIES
3500

TECHNICAL DATA

General Description Technical Data Construction Materials

A full range of 316 Stainless Steel Ports NPT (BSP option available) • Body/Bonnet/Bowl and Internals
large flow air service unit for the • 3/4", 1” Stainless Steel AISI 316 S11
offshore, food, pharmaceutical Gauge ports (BSP option available) to NACE MR-01-75
and allied industries. • 1/8” NPT • Sintered Polypropylene Element
AIR PREPARATION

• 1/4" NPT (option available) • Nitrile and 316 Stainless Steel

• 316 Stainless Steel throughout. Relief/Vent Port Diaphragm
• Large flow paths • 1/8" NPT (Fitted with bug screen) • Iconel X750 Valve Spring
minimise pressure drop. Working Temperature • 316 Stainless Steel
• Clean lines. Ambient Temperature Adjustment spring
• Integral mounting holes. • -20ºC to +80ºC (-4ºF to +176ºF) • Fluoroelastomer Seals and
Filtration Valve Assembly
Operating Medium • 5 micron
Gases, air, inert gas, sweet
Working Pressure
(natural) and sour gases.
Filters and Filter regulators
Ingress Protection • Manual drain 20 bar (290 psi)
Heavy seas/on deck rating • Automatic drain 17 bar (247 psi)
• Regulators maximum inlet
Functional Symbols pressure 20 bar (290 psi)
Bowl Retention
• 260cc (15.87cu ins)
Filters Regulated Pressure
• 0.1 to 2 bar (1.45 to 29 psi)
Filter with Filter with • 0.2 to 4 bar (2.90 to 58 psi)
manual drain automatic drain
• 0.3 to 7 bar (4.35 to 102 psi)
• 0.5 to 10 bar (7.25 to 145 psi)
• 0.8 to 16 bar (11.60 to 232 psi)
Maximum Relief Flow
at 2 bar (29 psi) secondary pressure
Regulators • 0.5 cc/sec (0.03cu in/sec)
Flow Capacity Flow Characteristics
Self relieving Non relieving Conform to ISO6953-2:2000
Filter
at 7 bar (102 psi) supply pressure,
0.35 bar (5psi) pressure drop For filter pressure drops
• 10020 L/min (353 SCFM) characteristics see graphs
Regulator on page 3500.3
at 7 bar (102 psi) inlet pressure,
6 bar (87 psi) secondary pressure, For pressure regulator
Filter/Regulators 1 bar (14.5 psi) pressure drop characteristics see graphs
• 7800 L/min (274 SCFM) on page 3500.4
Self relieving Non relieving Filter Regulator
with manual drain with manual drain
at 7 bar (102 psi) inlet pressure,
6 bar (87 psi) secondary pressure,
1 bar (14.5 psi) pressure drop
• 7800 L/min (274 SCFM)
Cv (Kv)
Self relieving Non relieving
• 3/4" - 7.8 (117)
with automatic drain with automatic drain • 1" - 8.0 (120)

www.midland-acs.com
3500.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

3500 Air Service Units

FILTER REGULATORS • 3/4”, 1”, NPT (BSP) 3500 SERIES

3500
SELF RELIEVING • NON RELIEVING
General Description Operating Medium, Ingress
A 316 Stainless Steel combination Protection Functional Symbols,
unit for filtration and pressure Technical Data and Construction
regulation of compressed air for Materials. See details on page 3500.1
the offshore, petrochemical,
Flow Characteristics

AIR PREPARATION
pharmaceutical and allied
industries. • For filter pressure drop characteristics
see graphs on page 3500.3
• Large flow paths minimise
pressure drop. • For pressure regulator characteristics
see graphs on page 3500.4
• 5 micron element.
• 5 pressure ranges.

Preferred Models
Model Number Description Weight kg (lbs)
Self Relieving ** For regulated pressure add code:
6FRMSV**2 3/4”NPT Filter with manual drain 5.75 (12.7) 0.1 to 2 bar (1.45 to 29 psi) -code 02
0.2 to 4 bar (2.90 to 58 psi) -code 04
6FRASV**2 3/4”NPT Filter with automatic drain 5.75 (12.7) 0.3 to 7 bar (4.35 to 102 psi) -code 07
8FRMSV**2 1”NPT Filter with manual drain 5.75 (12.7) 0.5 to 10 bar (7.25 to 145 psi) -code 10
0.8 to 16 bar (11.60 to 232 psi) -code 16
8FRMSV**2 1”NPT Filter with automatic drain 5.75 (12.7) - For BSP replace ‘2’ in position 9 with ‘1
- For 1/4” gauge port add ‘X’ to end of model number
Non Relieving
Specify model code “FRN” in place of “FRM” for manual drain versions.
Specify model code “FRB” in place of “FRA” for automatic drain versions.

INSTALLATION DIMENSIONS mm (inches)

Filter Regulators with Manual Drain Filter Regulators with Automatic Drain Mounting Brackets
6FRMSV**2, 8FRMSV**2, 6FRNSV**2, 8FRNSV**2 6FRASV**2, 8FRASV**2, 6FRBSV**2, 8FRBSV**2 Stand-pipe Mounting Kit
E SSAF638-28
E
D sq K
D sq Relief port K
1/8” NPT
(breather
fitted) Pressure Gauge

Relief port Relief port 50mm Pressure guage - glycerine filled

1/8” NPT 1/8” NPT
(breather A (breather SSF153N/11GLY (0 - 11 bar)
fitted) B fitted)
SSF153N/4GLY (0 - 4 bar)
A B 2 Mounting SSF153N/2GLY (0 - 2 bar)
holes
H 2 Mounting øL x M deep SSF153N/16GLY (0 - 16 bar)
holes (both sides)
øL x M deep For dimensional details see page 3500.4
(both sides)
H

2 ports P

CM CM
NM NM

Sight glass
(can be Sight glass
positioned at (can be
F 90º intervals) positioned at
90º intervals)
Drain port
M5 Drain port
M5

Model Number Ports P Ports G A B CA ✝ CM D E F H K L M NA✝ NM

6FRMSV**2A 3/4” NPT 1/8” NPT 219 174 201 180 87.5 120 52 21.5 70 M8 12 281 260
3/4” NPT 1/8” NPT (8.62) (6.85) (7.91) (7.09) (3.44) (4.72) (2.05) (0.85) (2.76) M8 (0.47) (11.06) (10.24)
8FRMSV**2A 1” NPT 1/8” NPT 219 174 201 180 87.5 120 52 21.5 70 M8 12 281 260
1” NPT 1/8” NPT (8.62) (6.85) (7.91) (7.09) (3.44) (4.72) (2.05) (0.85) (2.76) M8 (0.47) (11.06) (10.24)
Dimension NA or NM = clearance required below pipe centreline to enable bowl to be removed.
Dimensions for non relieving models (6FRNSV**2, 8FRNSV**, 6FRBSV**2 and 8FRBSY**2) are same as self relieving models above.
✝ = Dimensions CA and NA relate to models with automatc drain (6FRNSV**2, 8FRASV**, 6FRBSV**2 and 8FRBSV**2)

www.midland-acs.com
3500.2 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

3500 Air Service Units

FILTERS • 3/4”, 1”, NPT (BSP) 3500 SERIES
3500

MANUAL DRAIN • AUTOMATIC DRAIN

General Description
316 stainless steel compressed
air filters to provide clean dry air
for the offshore, petro-chemical
and allied industries.
AIR PREPARATION

• 5 micron element.
• Manual / auto drain.
• Large flow paths minimise
pressure drop.
Functional symbols,
Technical data and
Construction Materials
See details on page 3500.1

Preferred Models
Model Number Description Weight kg (lbs)
6FLMSV202 3/4" NPT Filter with manual drain 3.75 (8.27)
6FLASV172 3/4" NPT Filter with automatic drain 3.75 (8.27)
8FLMSV202 1" NPT Filter with manual drain 3.75 (8.27)
8FLASV172 1" NPT Filter with automatic drain 3.75 (8.27)

INSTALLATION DIMENSIONS mm (inches)

Filters with Manual Drain Filters with Automatic Drain Mounting Brackets
6FLMSV202,8FLMSV202 6FLASV172, 8FLASV172 Stand-pipe mounting kit
SSAF 638-28
E E
H D sq K D sq K 6
2 Mounting 2 Mounting 2 x M8
holes holes (0.24) 89 (3.50)
øL x M deep øL x M deep mounting
(both sides) (both sides) bolts
H

CM
2 ports P 79
2 ports P (3.11)
CA

NM NA 2”
Stand-pipe

Sight glass
Sight glass (can be
(can be positioned at
positioned at 90º intervals)
F 90º intervals)
F Drain port
Drain port 1/8" NPT
1/8" NPT

Model Number Ports P Ports G A B C D E H K L M

With manual drain
6FLMSV202 3/4" NPT - 180 87.5 120 52 30.5 70 M8 12 - 260
3/4" NPT - (7.09) (3.44) (4.72) (2.05) (1.20) (2.76) M8 (0.47) - (10.24)
8FLMSV202 1" NPT - 180 87.5 120 52 30.5 70 M8 12 - 260
1" NPT - (7.09) (3.44) (4.72) (2.05) (1.20) (2.76) M8 (0.47) - (10.24)
With automatic drain
6FLASV172 3/4" NPT 201 - 87.5 120 52 30.5 70 M8 12 281 -
3/4" NPT (7.91) - (3.44) (4.72) (2.05) (1.20) (2.76) M8 (0.47) (11.06)
8FLASV172 1" NPT 201 - 87.5 120 52 30.5 70 M8 12 281 -
1" NPT (7.91) - (3.44) (4.72) (2.05) (1.20) (2.76) M8 (0.47) (11.06) -

www.midland-acs.com
3500.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

3500 Air Service Units

PRESSURE REGULATORS • 3/4”, 1”, NPT (BSP) 3500 SERIES

3500
SELF RELIEVING • NON RELIEVING
General Description
A 316 Stainless Steel unit for
pressure regulation of
compressed air in the offshore,
petrochemical, and allied

AIR PREPARATION
industries.
** For regulated pressure add code:
• Large flow 0.1 to 2 bar (1.45 to 29 psi) -code 02
• 4 pressure ranges. 0.2 to 4 bar (2.90 to 58 psi) -code 04
0.3 to 7 bar (4.35 to 102 psi) -code 07
• High relief flow. 0.5 to 10 bar (7.25 to 145 psi) -code 10
0.8 to 16 bar (11.60 to 232 psi) -code 16
Operating Medium, Ingress
Protection, Functional
Symbols, Technical Data
and Construction Materials.
See details on page 3500.1

Preferred Models Flow Characteristics

Secondary pressure vs. Flow
Conforms to ISO6953-2:2000
Model Number Description Weight kg (lbs)
Self Relieving
6PRVSV**2A 3/4”NPT Pressure regulator 5.00 (11.0)
8PRVSV**2A 1”NPT Pressure regulator 5.00 (11.0)
Non Relieving
6PRNSV**2A 3/4”NPT Pressure regulator 5.00 (11.0)
8PRNSV**2A 1”NPT Pressure regulator 5.00 (11.0)
for BSP replace ‘2’ in position 9 with ‘1’
Models available with ANSI flanges - Contact customer service for further details.

INSTALLATION DIMENSIONS mm (inches)

Pressure Regulators - Self Relieving and Non Relieving

2 Gauge
ports G
Pressure Gauge
Relief port
1/8” NPT 50mm pressure gauge - glycerine filled
(breather
A
fitted) SSF153N/11GLY (0-11 bar)
B SSF153N/4GLY(0-4 bar)
2 Mounting SSF153N/2GLY(0-2 bar)
H holes SSF153N/16GLY(0-16 bar)
øL x M deep
(both sides)
Thread
1/8” NPT
C
47.5
2 ports P (1.87)
D sq K ø50
(1.97)
E
Other ranges of pressure gauge are available - details upon request

Model Number Ports P Ports G A B C D E H K L M

6PRVSV**2 3/4” NPT 1/8” NPT 219 174 53 87.5 120 21.5 70 M8 12
3/4” NPT 1/8” NPT (8.62) (6.85) (2.09) (3.44) (3.44) (0.85) (2.76) M8 (0.47)
8PRVSV**2 1” NPT 1/8” NPT 219 174 53 87.5 120 21.5 70 M8 12
1” NPT 1/8” NPT (8.62) (6.85) (2.09) (3.44) (3.44) (0.85) (2.76) M8 (0.47)
Dimensions for non relieving models (6FRNSV**2, 8FRNSV**) are same as self relieving models above.

www.midland-acs.com
3500.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

3500 Lubricator
1/2" NPT 3500 SERIES
3500

General Description Technical data

316 stainless steel for the offshore, Ports NPT (BSP option available)
food, pharmaceutical and allied • 1/2"
industries.
Provides lubrication of compressed Working temperature
AIR PREPARATION

air for use in these industries. Ambient temperature

• Accurate drip rate adjustment. • -20ºC to +80ºC (-4ºF to +176ºF)
• Can be filled under pressure. Working pressure
• Transparent sight feed dome • 17 bar (247 psi)
gives clear visibility of oil supply.
• Built in flow sensor automatically Capacity
adjusts lubrication delivery to • 380cc (23.2cu in)
meet wide air flow demand.
Construction Materials
• BodyStainless steel AISI 316
Functional Symbols
S11to NACE MR-0175
• Bowl 316 Stainless steel
• Flow and sight glass Acryl
• Seals Nitrile and Fluoroelastomer

Preferred Models
Model Number Description Weight kg (lbs)
Self Relieving
4LUBSN172 1/2" NPT Lubricator 1.80 (3.97)

INSTALLATION DIMENSIONS mm (inches)

4LUBSN172

C D

H K Sight dome
for oil drip
J 2 Gauge L
G ports G
2 Mounting Filter plug
holes øM

F E

Tagging hole
2 Ports P

Sight glass
for oil level

Model Number Ports P A B C D E F G H J K M

4LUBSN172 1/2" NPT 156 52 85 80 20 26 17.5 55 19 14 10 6.5
1/2" NPT (6.14) (2.05) (3.35) (3.15) (0.79) (1.02) (6.89) (2.17) (0.75) (0.55) (0.39) (0.26)

www.midland-acs.com
3500.5 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
PILOT SOLENOID OPERATED
General Description Technical Data
A range of compact 3/2 and 5/2 Ports
pilot solenoid operated spool valves • 1/4" NPT (BSP option available)
in Stainless Steel for use on gases. Working Temperature
• Hazardous area solenoids • Valve version -20ºC to +180ºC

PNEUMATIC VALVES
• Closed centre (-4ºF to +356ºF)
• ATEX, UL, CSA Approved • Solenoid version -20ºC to +65ºC
• EExd, NEMA 7&9 (-4ºF to +149ºF)
• Lightweight Low temperature version
• -50ºC (-58ºF ) (optional)
Working Pressure
Operating Medium • Single solenoid valve Construction Materials
Filtered non-lubricated air, 3 to 12 bar (45 to 174 psi) • Stainless Steel AISI 316L
inert gas, sweet (natural) gases. • Double solenoid valves to NACE MR-0175 Body
2 to 12 bar (30 to 174 psi) • Stainless Steel AISI 316L
Minimum Pilot Pressure to NACE MR-01-75 Spool
Functional Symbols
• At 6.3 bar (90 psi) body pressure • 316 Stainless Steel Spring
3/2 3/2 5/2
Normally Closed Diverter Pilot return 1.5 bar (22 psi) • Fluoroelastomer Seals
Maximum Flow • Solenoid (refer to solenoid
• 6.3 bar (87 psi), specifications)
3/2 3/2 1 bar (14.5 psi) differential Instrument Signals
Normally Open Changeover • 3/2 valves - 1000 L/min (35.3 SCFM) Valves with side mounted
• 5/2 valves - 1200 L/min (42.4 SCFM) solenoids can be supplied to
Cv (Kv) operate on instrument signals,
• 3/2 valves - 1.0 (15) typically 0 to 1.5 bar (0 to 21 psi).
• 5/2 valves - 1.2 (17) A separate supply to this pilot
solenoid is necessary. This supply
is 2 bar (30 psi) minimum for the
double pilot and 3 bar (45 psi)
minimum for the single pilot.

MODEL CODES
3/2 Valves

2326 1 2 3 4 VR2B 5 6 Voltage Codes

D = 24v DC
F = 48 VDC
Type M = 110v 50/60Hz AC
Operator Operator Accessories
B = Bi stable S = 220/230v 50/60Hz AC
(LH or Top) (RH or Bottom) - = None
M = mono stable 1 = Air 3 = Side solenoid 2 = Latch Lock, Solenoid Type
2 = Spring Manual reset CL = NEMA 7 & 9
3 = Side solenoid 8 = Reverse Latch Lock, P = EExme II T4/T6
Manual reset T = EExia IIC T6
4 = IP65
D = Eexd
K = Eexd
5/2 Valves

2526 1 2 3 4 VR2B 5 6 Voltage Codes

D = 24v DC M = 110v 50/60Hz AC
F = 48 VDC S = 220/230v 50/60Hz AC
Type Operator Operator Accessories
B = Bi stable (LH or Top) (RH or Bottom) – = None Solenoid Type
M = mono stable 1 = Air 3 = Side solenoid 2 = Latch Lock, CL = NEMA 7 & 9 P = EExme II T4/T6
2 = Spring Manual reset D = Eexd T = EExia IIC T6
3 = Side solenoid 8 = Reverse Latch Lock, K = EExd 4 = IP65
Manual reset

www.midland-acs.com
1500.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

PILOT SOLENOID OPERATED

SOLENOID MODEL CODES

Model Safety Protection and Approved Ingress Weight

Code Rating Housing Material Area Protection kg (lbs)
D EExd II T5 Flameproof, Cast Iron Zones 1 & 2 IP65 1.30 (2.86)
PNEUMATIC VALVES

Class I, Groups C & D NEMA 4

CL NEMA 7 & 9 Flameproof, 316 Stainless Steel 0.29 (0.65)
Class II, Groups E, F & G
K EExdIIC T6 Flameproof, 316 Stainless Steel Zones 1 and 2 IP67 1.62 (3.57)
P EEme II T4/T5 Increased Encapsulation, Glass Reinforced Polyamid. Zones 1 and 2 IP66 0.63 (1.39)
T EExia IIC T6 Intrinsically Safe. Glass Reinforced Polyamid. Zones 0 IP66 0.53 (1.17)
4 IP65 Solenoid Not Approved IP65 0.085 (0.19)
The model code shown appears in the 13th position of the model number.

Preferred Models - 3/2 Pilot Solenoid Operated

Model Number Description Weight kg (lbs) Symbol

2326M23-VR2B*+ 1/4” NPT 3/2 Pilot solenoid operated, spring return 0.56 (1.23) + Sol

2326M232VR2B*+ 1/4” NPT 3/2 Pilot solenoid operated, spring return 0.94 (2.07) + Sol
with latch lock, manual reset

2326M238VR2B*+ 1/4” NPT 3/2 Pilot solenoid operated, spring return 0.94 (2.07) + Sol
with reverse latch lock, manual reset

2326B13-VR2B*+ 1/4” NPT 3/2 Pilot solenoid operated, pilot air return 0.71 (1.56) + Sol

2326B33-VR2B*+ 1/4” NPT 3/2 Double pilot solenoid operated 0.71 (1.56) + Sol

Preferred Models - 5/2 Pilot Solenoid Operated

Model Number Description Weight kg (lbs) Symbol

2526M23-VR2B*+ 1/4” NPT 5/2 Pilot solenoid operated, spring return 1.01 (2.23) + Sol

2526M232VR2B*+ 1/4” NPT 5/2 Pilot solenoid operated, spring return 1.39 (3.06) + Sol
with latch lock, manual reset

2526M238VR2B*+ 1/4” NPT 5/2 Pilot solenoid operated, spring return 1.43 (3.15) + Sol
with reverse latch lock, manual reset

2526B13-VR2B*+ 1/4” NPT 5/2 Pilot solenoid operated, pilot air return 1.01 (2.23) + Sol

2526B33-VR2B*+ 1/4” NPT 5/2 Double pilot solenoid operated 1.02 (2.25) + Sol

+ Specify solenoid voltage.

Without solenoid fitted, specify ‘Z’ in position 13 (for Zones 0, 1 and 2).
* Specify solenoid type.
Without solenoid fitted, specify ‘A’ in position 13 (for NEMA 7 and 9).

www.midland-acs.com
1500.2 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
PILOT SOLENOID OPERATED
SOLENOID ASSEMBLIES
Solenoid code K Solenoid code D Solenoid code P (EEx me II CL (NEMA 7 & 9) Solenoid code 4
(EExd IIC T6) (EExd IIc T5) T4/T5) Solenoid code T (None/hazardous)
(EEx ai IIC T6)

G F Solenoid F
exhaust Solenoid F G Solenoid G Solenoid F G F G DIN

PNEUMATIC VALVES
Silencer port SP exhaust exhaust exhaust Solenoid plug
port SP port SP port SP exhaust
port SP
A
A A
A A

R
R

B
B

D D
C C

3/2 valve base. For basic valve dimensions see page 1500.4 5/2 valve base. For basic valve dimensions see page 1500.4

INSTALLATION DIMENSIONS mm (inches)

Model Code A B C D F G R SP
CL 42 (1.65) 41 (1.61) 32 (1.26) 32 (1.26) 18 (0.71) 40 (1.57) 16 (0.63) 1/8” NPT

D 76 (2.99) 41 (1.61) 32 (1.26) 32 (1.26) 25 (0.98) 84 (3.31) 16 (0.63) 1/8” NPT

K 110 (4.33) 41 (1.61) 32 (1.26) 32 (1.26) 52 (2.05) 58 (2.28) 16 (0.63) M8

P&T 71.5 (2.81) 41 (1.61) 32 (1.26) 32 (1.26) 25 (0.98) 81 (3.19) 16 (0.63) 1/8” NPT

4 57 (2.24) 39 (1.54) 26 (1.02) 21 (0.83) 19.5 (0.77) 50 (1.97) 11 (0.43) 1/8” NPT

SOLENOID SPECIFICATIONS
Model Code K D P T CL 4

Type of Protection EExd IIC T6 EExd IIc T5 EEx me II T4/T5 EEx ia IIc T6 NEMA 7 & 9 None

Approved Area Zones 1 and 2 Zones 1 and 2 Zones 1 and 2 Zone 0 Class I, Groups C & D, None
Class II Groups E, F & G

Degree of Protection IP67 IP65 IP66 IP66 NEMA 4 (IP55) IP65

Housing 316 Stainless Steel Ferritic, Cast Iron Glass reinforced Glass reinforced Stainless Molded
alt Aluminium Epoxy painted Polyamid Polyamid Steel Plastic
Epoxy coated Epoxy coated (St St conduit hub) Polyamid Coil potted

Cable Entry M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 1/2" NPT DIN plug
(Alt cable entry available) 24" leads

Power DC 5W 8W 6W 0.3W 1.8W 9W

Consumption AC 5W 1.8W 9W(holding)

Maximum Admissable 85ºC (185ºF) 100ºC (212ºF) T4 135ºC (275ºF) 85ºC (185ºF) 160ºC (320ºF) N/A
Surface Temp T5 100ºC (212ºF)

Maximum Ambient 40ºC (104ºF) 40ºC (104ºF) T4 75ºC (167ºF) 65ºC (149ºF) 40ºC (104ºF) 55ºC (131ºF)
Temperature T5 40ºC (104ºF)

Maximum Fluid Temp 80ºC (176ºF) 75ºC (167ºF) 75ºC (167ºF) 75ºC (167ºF) 105ºC (221ºF) 75ºC (167ºF)

Approved Standard ATEX ATEX ATEX ATEX UL Listed N/A

CSA Certified N/A

Certificate Number SIRA03ATEX1319 02ATEX6008X 02ATEX6023X 02ATEX6066X 026894X0000 N/A

www.midland-acs.com
1500.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

1500 Spool Valves

INSTALLATION DIMENSIONS • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

PILOT SOLENOID OPERATED

INSTALLATION DIMENSIONS mm (inches)

3/2 Pilot Solenoid Operated - Valve Bases

Spring Return Spring Return with Latch Lock Pilot Air Return Pilot Solenoid Return
2326M23-VR2B** 2326M232VR2B** 2326M238VR2B** 2326B13-VR2B** 2326B33-VR2B**
PNEUMATIC VALVES

Dimensions ‘E’, ‘F’, and ‘G’ as for spring return base

Model Number A B C D E F G H J K M P PP R S T
2326M23-VR2B** 42 4 50 32 26 22 5.5 16 25 41 32 1/4”NPT - - - -
(1.65) (0.16) (1.97) (1.26) (1.02) (0.87) (0.22) (0.63) (0.98) (1.61) (1.26) 1/4”NPT - - - -
2326M232VR2B** 42 44 50 32 26 22 5.5 16 25 41 32 1/4”NPT - 32 64 20
(1.65) (1.73) (1.97) (1.26) (1.02) (0.87) (0.22) (0.63) (0.98) (1.61) (1.26) 1/4”NPT - (1.26) (2.52) (0.79)
2326M238VR2B** 42 44 50 32 26 22 5.5 16 25 41 32 1/4”NPT - 32 64 20
(1.65) (1.73) (1.97) (1.26) (1.02) (0.87) (0.22) (0.63) (0.98) (1.61) (1.26) 1/4”NPT - (1.26) (2.52) (0.79)
2326B13-VR2B** 42 24 50 32 26 22 5.5 16 25 41 32 1/4”NPT 1/8”NPT - - -
(1.65) (0.94) (1.97) (1.26) (1.02) (0.87) (0.22) (0.63) (0.98) (1.61) (1.26) 1/4”NPT 1/8”NPT - - -
2326B33-VR2B** 42 - 50 32 26 22 5.5 16 25 41 32 1/4”NPT - - - -
(1.65) - (1.97) (1.26) (1.02) (0.87) (0.622) (0.63) (0.98) (1.61) (1.26) 1/4”NPT - - - -

5/2 Pilot Solenoid Operated - Valve Bases

Spring Return Spring Return with Latch Lock Pilot Air Return Pilot Solenoid Return
2526M23-VR2B** 2526M232VR2B** 2526M238VR2B** 2526B13-VR2B** 2526B33-VR2B**

Body width = N (over dimension ‘C’)

Dimensions ‘E’, ‘F’, and ‘G’ as for spring return base

Model Number A B C D E F G H J K M P PP R S T
2526M23-VR2B** 42 24 69 32 23 35 5.5 23 34.5 41 32 1/4”NPT - - - -
(1.65) (0.16) (2.72) (1.26) (0.91) (1.38) (0.22) (0.91) (1.36) (1.61) (1.26) 1/4”NPT - - - -
2526M232VR2B** 42 64 69 32 23 35 5.5 23 34.5 41 32 1/4”NPT - 32 64 20
(1.65) (2.52) (2.72) (1.26) (0.91) (1.38) (0.22) (0.91) (1.36) (1.61) (1.26) 1/4”NPT - (1.26) (2.52) (0.79)
2526M238VR2B** 42 64 69 32 23 35 5.5 23 34.5 41 32 1/4”NPT - 32 64 20
(1.65) (2.52) (2.72) (1.26) (0.91) (1.38) (0.22) (0.91) (1.36) (1.61) (1.26) 1/4”NPT - (1.26) (2.52) (0.79)
2526B13-VR2B** 42 24 69 32 23 35 5.5 23 34.5 41 32 1/4”NPT 1/8”NPT - - -
(1.65) (0.94) (2.72) (1.26) (0.91) (1.38) (0.22) (0.91) (1.36) (1.61) (1.26) 1/4”NPT 1/8”NPT - - -
2526B33-VR2B** 42 - 69 32 23 35 5.5 23 34.5 41 32 1/4”NPT - - - -
(1.65) - (2.72) (1.26) (0.91) (1.38) (0.622) (0.91) (1.36) (1.61) (1.26) 1/4”NPT - - - -

www.midland-acs.com
1500.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

1500 Direct Acting Valves

DIRECT ACTING VALVES • 1/4”, 3/2, NPT (BSP) 1500 SERIES

1500
SOLENOID OPERATED

General Description Technical Data

Direct acting solenoid operated Ports
valves in stainless steel for use • 1/4" NPT (BSP option available)
on gases and liquids. • 1/8” NPT exhaust ports

PNEUMATIC VALVES
• Solenoid options Orifice
• ATEX, UL, CSA • 2.5mm
Working Temperature
Operating Medium • -20ºC to +180ºC (-4ºF to +356ºF)
Low temperature version
Gases • -50ºC (-58ºF ) (optional)
Filtered lubricated or non-lubricated Working Pressure
• 12 bar (174 psi)
air, inert gas, sweet (natural) gases.
Maximum Flow
Sour gas option available
(details on application) • 6 bar (87 psi), 1 bar (14.5 psi)
differential
• 220 L/min (7.77 SCFM) Construction Materials
Liquids
Cv (Kv) • Stainless Steel AISI 316L
Low pressure hydraulic, mineral oil
• 0.22 (3.4) to NACE MR-01-75 Body
or water.
• 316 Stainless Steel Spring
Functional Symbols • Fluoroelastomer Seals
3/2 3/2
Normally Closed Normally Open
2 2

1 3 1 3

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2

2323M23-SD2U * + 1/4” NPT 3/2 Direct acting solenoid, spring return 0.28 (0.62) + Sol 10 12

1 3
2

1323M23-SD-F * + Sub base mounted direct acting solenoid, sp return 0.06 (1.13) + Sol 10
12

1 3

* Specify solenoid type, + Specify solenoid voltage

INSTALLATION DIMENSIONS mm (inches)

3/2 Direct Acting Solenoid, Spring Return Sub Base Mounted Direct Acting Solenoid, Spring Return

C C

D 4 Mounting
4 Mounting holes øH D
2
tapped H
2
E A E A 1
3 3
1
B B
2 Ports P
F F
G

Model Number A B C D E F G H P

2323M23-SD2U * + 38 (1.50) 30(1.18) 32(1.26) 12(0.47) 22(0.87) 15(0.59) 22(0.87) M4 x 6 deep 1/4”NPT

1323M23-SD-F * + 32(1.26) 14(0.55) 32(1.26) 10(0.39) 24(0.94) 24(0.94) - 4.2 (0.16) -

www.midland-acs.com
1500.5 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 6

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

PILOT OPERATED

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
pilot operated spool valves • 1/4" NPT (BSP option available)
in Stainless Steel for use on • 1/8" NPT pilot ports
gases and liquids Working Temperature
PNEUMATIC VALVES

• Compact • -20ºC to +180ºC (-4ºF to +356ºF)

• 3/2 and 5/2 versions Low temperature version
• -50ºC (-58ºF ) (optional)
• Meet NACE standard Working Pressure (gases & liquids)
• Stainless Steel internals • 12 bar (174 psi) Maximum
Minimum Pilot Pressure
• 6.3 bar (90 psi) body pressure
Operating Medium
3/2 5/2
Gases Spring Return 2.3 bar (33 psi) 3.5 bar (51 psi)
Filtered lubricated or non-lubricated Pilot Return 1.3 bar (19 psi) 2.3 bar (33 psi)
Pilot Servo 0.8 bar (12 psi) 1.2 bar (17 psi)
air, inert gas, sweet (natural) gases.
Pilot Reset 3.0 bar (44 psi) 5.0 bar (72 psi)
Sour gas option available
(details on application) Maximum Flow
• 6.3 bar (87 psi),
1 bar (14.5 psi) differential
Functional Symbols
3/2 3/2 5/2
• 3/2 valves - 1000 L/min (35.3 SCFM)
Normally Closed Diverter • 5/2 valves - 1200 L/min (42.4 SCFM)
Cv (Kv)
• 3/2 valves - 1.0 (15)
3/2 3/2 • 5/2 valves - 1.2 (17)
Normally Open Changeover Construction Materials
• Stainless Steel AISI 316L
to NACE MR-01-75 Body
• Stainless Steel AISI 316L
to NACE MR-01-75 Spool
• 316 Stainless Steel Spring
• Fluoroelastomer Seals

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326M21-VR2B 1/4” NPT 3/2 Pilot operated, spring return 0.55 (1.21)

2326M212VR2B 1/4” NPT 3/2 Pilot operated, spring return 0.93 (2.05)
with latch lock, manual reset

2326M218VR2B 1/4” NPT 3/2 Pilot operated, spring return 0.93 (2.05)
with reverse latch lock, manual reset

2326B11-VR2B 1/4” NPT 3/2 Pilot operated, pilot return 0.70 (1.54)

2526M21-VR2B 1/4” NPT 5/2 Pilot operated, spring return 1.00 (2.20)

2526M212VR2B 1/4” NPT 5/2 Pilot operated, pilot return 1.38 (3.04)
with latch lock, manual reset

2526M218VR2B 1/4” NPT 5/2 Pilot operated, spring return 1.38 (3.04)
with reverse latch lock, manual reset

2526B11-VR2B 1/4” NPT 5/2 Pilot operated, pilot return 1.00 (2.20)

www.midland-acs.com
1500.6 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 7

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
PILOT OPERATED
INSTALLATION DIMENSIONS mm (inches)

3/2 Pilot Operated, Spring or Pilot Return

Pilot Operated - Spring Return Pilot Operated - Spring Return with latch lock Pilot Operated - Pilot Return
2326M21-VR2B 2326M212VR2B, 2326M218VR2B 2326B11-VR2B

PNEUMATIC VALVES
øR

B C B C
S E 3 mounting
E 3 mounting C
holes øG 2 holes øG
2
1 pilot
port PP M
M M F sq
F sq
sq
1 3
1 3 1 3
3 ports P 3 ports P H H 3 ports P

Model Number A D K L P PP
2326M21-VR2B 78 24 - - 1/4”NPT 1/8”NPT
(3.07) (0.94) - - 1/4”NPT 1/8”NPT
2326B11-VR2B 98 24 - - 1/4”NPT 1/8”NPT
(3.86) (0.94) - - 1/4”NPT 1/8”NPT
2326M212VR2B 118 24 - - 1/4”NPT 1/8”NPT
(4.65) (0.94) - - 1/4”NPT 1/8”NPT
2326M218VR2B 118 24 - - 1/4”NPT 1/8”NPT
(4.65) (0.94) - - 1/4”NPT 1/8”NPT

5/2 Pilot Operated, Spring or Pilot Return

Pilot Operated - Spring Return Pilot Operated - Spring Return with Latch Lock Pilot Operated - Pilot Return
2526M21-VR2B 2526M212VR2B, 2526M218VR2B 2526B11-VR2B

øR

B C C C
B Body
H S H depth=M
H
2 4 2 4

M M M
F N sq M
sq sq F NM
3 1 5 sq
1 vent 3 1 5 1 vent
port V 1 vent 3 1 5
E T H H 5 ports P port V
3 mounting 5 ports P port V E
holes øG B 3 mounting 5 ports P
H H holes øG H H

Model Number A D K L P PP V
2526M21-VR2B 117 24 - - 1/4” NPT 1/8” NPT 1/8” NPT
(4.61) (0.94) - - 1/4” NPT 1/8” NPT 1/8” NPT
2526B11-VR2B 117 24 - - 1/4” NPT 1/8” NPT -
(4.61) (0.94) - - 1/4” NPT 1/8” NPT -
2526M212VR2B 157 24 - - 1/4” NPT 1/8” NPT -
(6.18) (0.94) - - 1/4” NPT 1/8” NPT -
2526M218VR2B 157 24 - - 1/4” NPT 1/8” NPT -
(6.18) (0.94) - - 1/4” NPT 1/8” NPT -

www.midland-acs.com
1500.7 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 8

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

MECHANICALLY OPERATED (ROLLER/LEVER, ROLLER, PLUNGER)

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
spool valves in Stainless Steel • 1/4" NPT (BSP option available)
for use on gases. Working Temperature
• -20ºC to +75ºC (-4ºF to +167ºF)
PNEUMATIC VALVES

• Closed centre
Low temperature version
• All 316L • -50ºC (-58ºF ) (optional)
• Compact Working Pressure
• 12 bar (174 psi) maximum
Operating Medium Maximum Flow
• 6 bar (87 psi), 1 bar (14.5 psi)
Gases differential
Filtered non-lubricated air, • 3/2 valves - 1000 L/min (35.3 SCFM)
inert, sweet (natural) gases. • 5/2 valves - 1200 L/min (42.4 SCFM)
Cv (Kv)
Functional Symbols • 3/2 valves - 1.0 (15)
3/2 3/2 5/2 • 5/2 valves - 1.2 (17)
Normally Closed Diverter
Operating Force
• 10 bar (145 psi) differential
3/2 5/2
3/2 3/2
Normally Open Changeover Roller/lever 35 N (8 lbf) 40 N (9 lbf)
Roller 76 N (17 lbf) 89 N (20 lbf)
Plunger 76 N (17 lbf) 89 N (20 lbf)
Construction Materials
• Stainless Steel AISI 316L
to NACE MR-01-75 Body
• Stainless Steel AISI 316L
to NACE MR-0175 Spool
• 316 Stainless Steel Spring
• Fluoroelastomer Seals
• 316 Stainless Steel Roller/Lever

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326M28-VR2B 1/4” NPT 3/2 Roller/lever operated, spring return 0.55 (1.21)

2326M2CVR2B 1/4” NPT 3/2 Roller operated, spring return 0.48 (1.06)

2326M26-VR2B 1/4” NPT 3/2 Plunger operated, spring return 0.46 (1.01)

2526M28-VR2B 1/4” NPT 5/2 Roller/lever operated, spring return 1.00 (2.20)

2526M2CVR2B 1/4” NPT 5/2 Roller operated, spring return 1.12 (2.47)

2526M26-VR2B 1/4” NPT 5/2 Plunger operated, spring return 1.10 (2.42)
For panel mounted versions of roller operated and plunger operated models, substitute code 5 for - in position 8. (i.e. 2326M26-VR2B becomes
2326M265VR2B, 2526M2CVR2B becomes 2526M2C5-ER2B, 2526M26-VR2B becomes 2526M265 VR2B)

www.midland-acs.com
1500.8 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 9

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
MECHANICALLY OPERATED (ROLLER/LEVER, ROLLER, PLUNGER)
INSTALLATION DIMENSIONS mm (inches)

3/2 Roller/Lever, Roller, Plunger Operated, Spring Return

Roller/Lever Operated Roller Operated Plunger Operated
2326M26-VR2B Travel 2326M2C-VR2B, 2326M2C5VR2B 2326M26-VR2B, 2326M265VR2B

PNEUMATIC VALVES
T øL
D D

K R S K R
Roller
2 X width W

10
øY øL øY
V 12 12
12
1 3
3 3
3 ports P 3 ports P Travel T
3 ports P Travel T
D Maximum Panel
Maximum Panel
Thickness PT Thickness PT
Travel T = 11.75 (0.46) to operate, 12.5 (0.49) maximum
For basic valve dimensions see 3/2 spring return bases on page 1500.7

Model Number D K L P R S T V W X PT
2326M28-VR2B 47 - 20 1/4” NPT - - 12.5 22 - 37 -
(1.85) - (0.79) 1/4” NPT - - (0.49) (0.87) - (1.46) -
2326M2C-VR2B 50 10 - 1/4” NPT 15 10.5 5 - 5 - 5
(1.97) (0.39) - 1/4” NPT (0.59) (0.41) (0.20) - (0.20) - (0.20)
2326M26-VR2B 35 10 13 1/4” NPT 15 - 5 - - - 5
(1.38) (0.39) (0.51) 1/4” NPT (0.59) - (0.20) - - - (0.20)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
Panel mounted models 2326M2C5VR2B and 2326M265VR2B are supplied with 2 off locknuts as indicated.

5/2 Roller/Lever, Roller, Plunger Operated, Spring Return

Roller/Lever Operated Roller Operated Plunger Operated
2526M28-VR2B 2526M2C-VR2B, 2526M2C5VR2B 2526M26-VR2B, 2526M265VR2B

Travel
T øL D D
K R S K R
2 4 Roller
width W
X

10
øY øL øY
14
V 14
12
1 3 15 15
5 ports P 5 ports P Travel T 5 ports P Travel T
D Maximum Panel Maximum Panel
Thickness PT Thickness PT

Travel T = 14.5 (0.57) to operate, 15.25 (0.60) maximum

For basic valve dimensions see 5/2 spring return bases on page 1500.7

Model Number D K L P R S T V W X PT
2526M28-VR2B 51 - 20 1/4” NPT - - 15.25 22 - 37 -
(2.00) - (0.79) 1/4” NPT - - (0.60) (0.87) - (1.46) -
2526M2C-VR2B 50 10 - 1/4” NPT 15 10.5 6 - 5 - 5
(1.97) (0.39) - 1/4” NPT (0.59) (0.41) (0.24) - (0.20) - (0.20)
2526M26-VR2B 35 10 13 1/4” NPT 15 - 6 - - - 5
(1.38) (0.39) (0.51) 1/4” NPT (0.59) - (0.24) - - - (0.20)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
Panel mounted models 2526M2C5VR2B and 2526M265VR2B are supplied with 2 off locknuts as indicated.

www.midland-acs.com
1500.9 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 10

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (PAD)

General Description Technical Data
A range of compact 3/2 and 5/2 Ports
manually operated spool valves • 1/4" NPT (BSP option available)
in Stainless Steel for use on gases. • 1/8" NPT pilot ports
• Panel mounted option Working Temperature
PNEUMATIC VALVES

• Closed centre • -20ºC to +180ºC (-4ºF to +356ºF)

• Compact Low temperature version
• -50ºC (-58ºF ) (optional)
Operating Medium Working Pressure (gases & liquids)
• 12 bar (174 psi) Maximum
Gases Maximum Flow
Filtered non-lubricated air, • 6 bar (87 psi),
inert, sweet (natural) gases. 1 bar (14.5 psi) differential
• 3/2 valves - 1000 L/min (35.3 SCFM)
Functional Symbols • 5/2 valves - 1200 L/min (42.4 SCFM)
3/2 3/2 5/2
Normally Closed Diverter Cv (Kv)
• 3/2 valves - 1.0 (15)
• 5/2 valves - 1.2 (17)
3/2 3/2 Operating Force
Normally Open Changeover • 10 bar (145 psi) differential
• 3/2 valves 76 N (17 lbf)
• 5/2 valves 89 N (20 lbf)
Construction Materials
• Stainless Steel AISI 316L
to NACE MR-01-75 Body
• Stainless steel AISI 316L
to NACE MR-01-75 Spool
• 316 Stainless Steel Spring
• Fluoroelastomer Seals
• Phenolic Resin Pad

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326M27-VR2B 1/4” NPT 3/2 Pad operated, spring return 0.50 (1.10)

2326B77-VR2B 1/4” NPT 3/2 Pad operated, push - pull 0.61 (1.34)

2326B773VR2B 1/4” NPT 3/2 Pad operated, push - pull with detent 0.63 (1.39)

2326B17-VR2B 1/4” NPT 3/2 Pad operated, pilot air return 0.63 (1.39)

2526M27-VR2B 1/4” NPT 5/2 Pad operated, spring return 0.95 (2.09)

2526B77-VR2B 1/4” NPT 5/2 Pad operated, push - pull 0.93 (2.05)

2526B773VR2B 1/4” NPT 5/2 Pad operated, push - pull with detent 0.95 (2.09)

2526B17-VR2B 1/4” NPT 5/2 Pad operated, pilot air return 0.95 (2.09)

www.midland-acs.com
1500.10 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 11

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
MANUALLY OPERATED PAD
INSTALLATION DIMENSIONS mm (inches)

3/2 Pad Operated, Spring Return 3/2 Pad Operated (Push-Pull)

Pad Operated 3/2 Pad Operated, Pilot Air Return
2326M27-VR2B, 2326M275VR2B
Pad Operated (Push-Pull) 2326B77VR2B, 2326MB775VR2B

PNEUMATIC VALVES
Pad Operated (Push-Pull) 2326B773VR2B
Pad Operated, Pilot Air Return 2326B17VR2B, 2326B175VR2B

D
D
K R
K R
2
2

10 øL
10 øL
12
1 3 12
øY Travel T 1 3
3 ports P
øY Travel T
Maximum Panel Thickness PT 3 ports P
Maximum Panel Thickness PT

For basic valve dimensions, see 3/2 spring return For basic valve dimensions, see 3/2 spring return
bases on page 1500.7 bases on page 1500.7

Model Number D K L P R T PT
2326M27-VR2B 60 10 38 1/4” NPT 15 5 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20)
2326B77-VR2B 60 10 38 1/4” NPT 15 5 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20)
2326B773VR2B 60 10 38 1/4” NPT 15 5 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20) Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
2326B17-VR2B 60 10 38 1/4” NPT 15 5 5 Panel mounted models 2326M275VR2B, 2326B775VR2B and
2326B175VR2B are supplied with 2 off locknuts as indicated.
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20)

5/2 Pad Operated, Spring Return, 5/2 Pad Operated (Push-Pull), 5/2 Pad Operated, Pilot Air Return
Pad Operated (Push-Pull) 2526M27-VR2B, 2526M275VR2B
Pad Operated (Push-Pull) 2526B77-VR2B, 2526B775VR2B
Pad Operated (Push-Pull) with detent 2526B773VR2B
Pad Operated, pilot air return 2526B17-VR2B, 2526B175VR2B
D
K R

2 4

12 øL

14

3 1 5 øY
3 ports P Travel T

Maximum Panel Thickness PT

For basic valve dimensions, see 5/2 spring return or 5/2 pilot return bases on page 1500.7

Model Number D K L P R T PT
2526M27-VR2B 60 10 38 1/4” NPT 15 6 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.24) (0.20)
2526B77-VR2B 60 10 38 1/4” NPT 15 6 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.24) (0.20)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
2526B773VR2B 60 10 38 1/4” NPT 15 6 5 Panel mounted models 2526M275VR2B, 2526B775VR2B and
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.24) (0.20) 2526B175VR2B are supplied with 2 off locknuts as indicated.
2526B17-VR2B 60 10 38 1/4” NPT 15 6 5
(2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.24) (0.20)

www.midland-acs.com
1500.11 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 12

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2 NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (PAD) AND PILOT OPERATED

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
manually operated spool valves • 1/4" NPT (BSP option available)
in stainless steel for use on liquids • 1/8" NPT pilot ports
and gases. Working Temperature
PNEUMATIC VALVES

• -20ºC to +180ºC (-4ºF to +356ºF)

• Panel mounted option Low temperature version
• Closed centre • -50ºC (-58ºF ) (optional)
• Compact
Working Pressure
(gases & liquids)
Operating Medium
• 12 bar (174 psi) Maximum
Gases
Working Pressure
• Filtered lubricated or non-lubricated
(gases and liquids)
air, inert gas, sweet (natural) gases. • 12 bar (174 psi)
Sour gas option available.
(details on application) Operating Force
Liquids • 10 bar (145 psi) body pressure
• 3/2 valves 76 N (17 lbf) Construction Materials
• Low pressure hydraulic, mineral oil
• 5/2 valves 89 N (20 lbf) • Stainless Steel AISI 316L
or water
Cv (Kv) to NACE MR-01-75 Body
Functional Symbols • 3/2 valves - 1.0 (15) • Stainless Steel AISI 316L
3/2 3/2 5/2 • 5/2 valves - 1.2 (17) to NACE MR-01-75 Spool
Normally Closed Diverter
Maximum Flow • 316 Stainless Steel Spring
• 6 bar (87 psi), • Fluoroelastomer Seals
1 bar (14.5 psi) differential • Phenolic Resin Pad
3/2 3/2
Normally Open Changeover
• 3/2 valves - 1000 L/min (35.3 SCFM)
• 5/2 valves - 1200 L/min (42.4 SCFM)

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2

2326M2F-VR2B 1/4” NPT 3/2 Pad or pilot operated, spring return 0.65 (1.54) 12 10

3 1
2 4

2526M2F-VR2B 1/4” NPT 5/2 Pad or pilot operated, spring return 1.00 (2.20) 12 14

3 1 5

These models are supplied with 2 off locknuts for mounting.

www.midland-acs.com
1500.12 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 13

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, NPT (BSP) 1500 SERIES

1500
MANUALLY OPERATED (PAD) AND PILOT LATCH
INSTALLATION DIMENSIONS mm (inches)
3/2 Pad or Pilot Operated, Spring Return

PNEUMATIC VALVES
2326M2F-VR2B

B D
BS K R
Signal Port SP 2

øL

14
10 1 3
External port EP øY Travel T
3 ports P
Maximum Panel Thickness PT

For basic valve dimensions, see 3/2 pilot air return bases on page 1500.7

Model Number B D* K L P R T PT
2326M2F-VR2B 34 60 10 38 1/4” NPT 15 5 5
(1.34) (2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20)

Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.

Panel mounted model 2326M2F5VR2B, 2526M2F5VR2B are supplied with 2 off locknuts for mounting.
For above model in Brass specify ‘R’ in position 9 (in place of ‘V’)

5/2 Pad or Pilot Operated, Spring Return

2526M2F-VR2B

B D
BS
K R
Signal Port SP
2 LA

øL

14
10 1 3
External port EP øY Travel T
3 ports P
Z ZA

For basic valve dimensions, see 3/2 pilot air return bases on page

Model Number B D* K L P R T PT
2526M2F-VR2B 34 60 10 38 1/4” NPT 15 5 5
(1.34) (2.36) (0.39) (1.50) 1/4” NPT (0.59) (0.20) (0.20)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
Panel mounted model 2326M2F5VR2B, 2526M2F5VR2B are supplied with 2 off locknuts for mounting.
For above model in Brass specify ‘R’ in position 9 (in place of ‘V’)

www.midland-acs.com
1500.13 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 14

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (PAD) AND PILOT LATCH

INSTALLATION DIMENSIONS mm (inches)
General Description
A range of compact 3/2
manually operated spool valves
in Stainless Steel for use on gases.
PNEUMATIC VALVES

• Mechanical latch
• Pilot latch

Operating Medium

Gases Function
Filtered non-lubricated, PAD OPERATED, SPRING RETURN
air, inert, sweet (natural) gases. WITH PILOT LATCH
Maximum Flow If a pilot pressure of 1.5 to 10 bar (21 to 145 psi) is
present at pilot ports when the knob is pulled out,
Functional Symbols • 6 bar (87 psi), 1 bar (14.5 psi) the pilot pressure will hold the valve in the operated
differential position against the return spring. If the pilot
3/2 3/2 5/2 pressure falls to 0.5 bar (7 psi) or less, the valve
Normally Closed Diverter • 3/2 valves - 1000 L/min will be reset to its unoperated position. The valve
(35.3 SCFM) cannot be operated by pilot pressure alone, manual
operation must take place first.
Cv (Kv)
3/2 3/2 • 3/2 valves - 1.0 (15)
Normally Open Changeover
PAD OPERATED, SPRING RETURN
Operating Force
WITH PILOT LATCH AND MANUAL
• 10 bar (145 psi) body pressure
LATCH PIN
Button Operated If a pilot pressure of 1.5 to 10 bar (21 to 145 psi) is
• 3/2 valves - 76 N (17 lbf) present at pilot ports when the knob is pulled out,
the pilot pressure will hold the valve in the operated
• 5/2 valves - 89 N (20 lbf) position against the return spring. If the pilot
Construction Materials pressure falls to 2 to 10 bar (29 to 145 psi) this will
Technical Data simultaneously allow the latch to release whilst
• Stainless Steel AISI 316L holding the valve in the operated position. The valve
Ports will reset to its unoperated position. The valve
to NACE MR-01-75 Body
• 1/4" NPT (BSP option available) cannot be operated by pilot pressure alone, manual
• Stainless Steel AISI 316L operation must take place first.
Working Temperature
to NACE MR-01-75 Spool
• -20ºC to +180ºC (-4ºF to +356ºF)
• 316 Stainless Steel Spring
Low temperature version
• -50ºC (-58ºF ) (optional) • Fluoroelastomer Seals
Working Pressure (gases and liquids)
• 10 bar (145 psi) maximum

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326M276VR2B 1/4” NPT 3/2 Pad operated, spring return with pilot latch 0.75 (1.65)

2326M2JVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2326M27AVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2326M27HVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2526M276VR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2526M27JVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2526M27AVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

2526M27HVR2B 1/4” NPT 3/2 Pad operated, spring return, pilot latch, manual pin 0.85 (1.87)

www.midland-acs.com
1500.14 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 15

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, NPT (BSP) 1500 SERIES

1500
MANUALLY OPERATED (PAD)
INSTALLATION DIMENSIONS mm (inches)

3/2 Pad Operated, Spring Return with Pilot Latch (Visual Indicator Option).

2326M276VR2B (Visual Indicator Option 2326M27JVR2B)

PNEUMATIC VALVES
B D
BS K R D
Signal port SP 2
Visual
Indicator
øL øL
Option
12

10 1 3
Exhaust port EP 3 ports P øY Travel T Travel T
BE Maximum Panel Thickness PT

For basic valve dimensions, see 3/2 spring return bases on page 1500.7

3/2 Pad Operated, Spring Return with Pilot Latch and Manual Latch Pin (Visual Indicator Option).
2326M27AVR2B (Visual Indicator Option 2326M27HVR2B)

B D
BS D
K R
Signal port SP
2 LA Visual
Indicator øL
2
øL Option
12
Travel T
10 1 3
Exhaust port EP 3 ports P øY Travel T
BE Z ZA

For basic valve dimensions, see 3/2 spring return bases on page 1500.7

Model Number B BE BS D* K L LA P SP EP R T PT Z ZA
2326M276VR2B 45 33 38 60 10 38 - 1/4” NPT 1/8” NPT 1/8” NPT 15 5 5 - -
(1.77) (1.30) (1.50) (2.36) (0.39) (1.50) - 1/4” NPT 1/8” NPT 1/8” NPT (0.59) (0.20) (0.20) - -
2326M27AVR2B 45 33 38 72.5 10 38 38 1/4” NPT 1/8” NPT 1/8” NPT 15 5 - 10 16
(1.77) (1.30) (1.50) (2.36) (0.39) (1.50) (1.50) 1/4” NPT 1/8” NPT 1/8” NPT (0.59) (0.20) - (0.39) (0.63)
2326M27JVR2B 45 33 38 89/105 10 38 38 1/4” NPT 1/8” NPT 1/8” NPT 15 5 - 10 16
(1.77) (1.30) (1.50) (3.50)/(4.13) (0.39) (1.50) (1.50) 1/4” NPT 1/8” NPT 1/8” NPT (0.59) (0.20) - (0.39) (0.63)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.
Visual Indicator - Red (Off) / Green (On)
* D dimension for visual indicator option code ‘J’ = 89 (3.50), code ‘H’ = 105 (4.13). These models are supplied with 2 off locknuts for mounting.

www.midland-acs.com
1500.15 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 16

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (BUTTON), MANUALLY OPERATED (KEY)

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
manually operated spool valves • 1/4" NPT (BSP option available)
in Stainless Steel for use on gases. Working Temperature
• -20ºC to +180ºC (-4ºF to +356ºF)
PNEUMATIC VALVES

• Unique key Working Pressure (gases and liquids)

• Fully guarded button • 10 bar (145 psi) maximum
• Closed centre Operating Force
• 10 bar (145 psi) body pressure
Operating Medium Button Operated
Filtered non-lubricated air, • 3/2 valves - 76 N (17 lbf)
inert, sweet (natural) gases. • 5/2 valves - 89 N (20 lbf)
Maximum Flow
Functional Symbols • 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 3/2 5/2 • 3/2 valves - 1000 L/min (35.3 SCFM)
Normally Closed Diverter • 5/2 valves - 1200 L/min (42.4 SCFM)
Cv (Kv)
• 3/2 valves - 1.0 (15)
3/2 3/2 • 5/2 valves - 1.2 (17)
Normally Open Changeover
Construction Materials
• Stainless Steel AISI 316L
to NACE MR-01-75 Body
• Stainless Steel AISI 316L
to NACE MR-01-75 Spool
• 316 Stainless Steel Spring
• Fluoroelastomer Seals

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326M2G-VR2B 1/4” NPT 3/2 Button operated, spring return 0.50 (1.10)

2326M2GGVR2B 1/4” NPT 3/2 Guarded button operated, spring return 0.55 (1.21)

2326BRR-VR2B 1/4” NPT 3/2 Key operated (positive). 0.97 (2.14)

Key removable in unoperated position

2326M2R-VR2B 1/4” NPT 3/2 Key operated (spring return). 0.97 (2.14)
Key removable in unoperated position

2326BRK-VR2B 1/4” NPT 3/2 Key operated (positive). 0.97 (2.14)

Key removable in both positions

2526BRR-VR2B 1/4” NPT 5/2 Key operated (positive). 1.47 (3.24)

Key removable in unoperated position

2526M2R-VR2B 1/4” NPT 5/2 Key operated (spring return). 1.47 (3.24)
Key removable in unoperated position

2526BRK-VR2B 1/4” NPT 5/2 Key operated (positive). 1.47 (3.24)

Key removable in both positions
For panel mounted version of model 2326M2G-VR2B, substitute code 5 for – in position 8. All other models are supplied with panel mounting facilities.

www.midland-acs.com
1500.16 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 17

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES

1500
MANUALLY OPERATED (BUTTON), MANUALLY OPERATED (KEY)
INSTALLATION DIMENSIONS mm (inches)

3/2 Button Operated, Spring Return 3/2 Button Operated, Spring Return
2326M2G-VR2B D 2326M2GGVR2B D

R K R Bezel nut A/F hexagon HB

PNEUMATIC VALVES
K
2
øY
2

10 10
øL øY øL
12 12

1 3 1 3
Travel T 3 ports P Travel T
3 ports P
Maximum Panel Thickness PT Back nut A/F hexagon HA Maximum Panel Thickness PT

Model Number D K L P R T PT HA HB
2326M2G-VR2B 31 10 20 1/4” NPT 15 5 5 Panel mounting thread øY is 15/16”
dia x 26 TPI Whit Form
(1.22) (0.39) (0.79) 1/4” NPT (0.59) (0.20) (0.20) - -
2326M2GGVR2B 31 10 20 1/4” NPT 15 5 4 30.5 28
(1.22) (0.39) (0.79) 1/4” NPT (0.59) (0.20) (0.16) (1.20) (1.10)

3/2 Key Operated 5/2 Key Operated

Key Operated (Key retained in operated position) 2326BRR-VR2B Key Operated (Key retained in operated position) 2526BRR-VR2B
Key Operated, spring return (Key retained in ordered position) 2326M2R-VR2B Key Operated, spring return (Key retained in ordered position) 2526M2R-VR2B
Key Operated (Key removable in both positions) 2326BRK-VR2B Key Operated (Key removable in both positions) 2526BRK-VR2B
KTº
KA KB
KE

2
KA
10

12 KA
1 3

KD M sq 3 ports P

For basic valve dimensions see 3/2 and 5/2 spring return bases on page 1500.7

Model Number P M KA KB KD KE KT
2326BRR-VR2B 1/4” NPT 32 25 29 22 71 90º
1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 90º

2326M2R-VR2B 1/4” NPT 32 25 29 22 71 60º

1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 60º

2326BRKVR2B 1/4” NPT 32 25 29 22 71 90º

1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 90º

2526BRR-VR2B 1/4” NPT 32 25 29 22 71 90º

1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 90º

2526M2R-VR2B 1/4” NPT 32 25 29 22 71 60º

1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 60º

2526BRKVR2B 1/4” NPT 32 25 29 22 71 90º

1/4” NPT (1.26) (0.98) (1.14) (1.14) (2.60) 90º

www.midland-acs.com
1500.17 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 18

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, 5/2, NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (SWITCH), MANUALLY OPERATED (LEVER)

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
manually operated spool valves • 1/4" NPT (BSP option available)
in Stainless Steel for use on gases. • 1/8" NPT vent port
PNEUMATIC VALVES

• Panel mounted switch operated Working Temperature

• Closed centre • -20ºC to +180ºC (-4ºF to +356ºF)
• Compact Low temperature version
• -50ºC (-58ºF ) (optional)
Operating Medium
Working Pressure
Gases • 12 bar (174 psi) maximum
Filtered non-lubricated air, Maximum Flow
inert, sweet (natural) gases. • 6 bar (87 psi), 1 bar (14.5 psi) differential
Liquids • 3/2 valves - 1000 L/min (35.3 SCFM) Construction Materials
Low pressure hydraulic, mineral • 5/2 valves - 1200 L/min (42.4 SCFM) • Stainless Steel AISI 316L
oil or water. to NACE MR-01-75 Body
Cv (Kv) • Stainless Steel AISI 316L
Functional Symbols • 3/2 valves - 1.0 (15) to NACE MR-01-75 Spool
3/2 3/2 5/2 • 5/2 valves - 1.2 (17) • 316 Stainless Steel Spring
Normally Closed Diverter
• Fluoroelastomer Seals
Operating Force
3/2 3/2 • 10 bar (145 psi) body pressure
Normally Open Changeover
Switch Operated
• 3/2 valves - 13 N (2.9 lbf)
• 5/2 valves - 16 N (3.5 lbf)

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2326B00-VR2B 1/4” NPT 3/2 Switch operated, spring return with detent 0.80 (1.76)

2326B553VR2B 1/4” NPT 3/2 Lever operated, with detent 0.80 (1.76)

2326M25-VR2B 1/4” NPT 3/2 Lever operated, spring return 0.65 (1.43)

2526B00-VR2B 1/4” NPT 5/2 Switch operated, spring return with detent 1.10 (2.43)

2526B553VR2B 1/4” NPT 5/2 Lever operated, with detent 1.10 (2.43)

2526M25-VR2B 1/4” NPT 5/2 Lever operated, spring return 1.10 (2.43)
Models 2326B00-VR2B and 2526B00-VR2B are supplied with 2 off locknuts for mounting.

www.midland-acs.com
1500.18 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 19

1500 Spool Valves

SPOOL VALVES • 1/4”, 3/2, NPT (BSP) 1500 SERIES

1500
MANUALLY OPERATED (SWITCH), MANUALLY OPERATED (LEVER)
INSTALLATION DIMENSIONS mm (inches)
3/2 Switch Operated, Spring Return with Detent
2326B00-VR2B
2326B20-VR2B

PNEUMATIC VALVES
D

K R S
øY
2
SC

10 12 SBº

1 3
3 ports P
Back nut A/F hexagon HA
Travel T
Maximum Panel Thickness PT

For basic valve dimensions, see 3/2 spring return bases on page 1500.7

Model Number D K P R HA HB PT SA SB SC
2326B00-VR2B 61 10 1/4” NPT 10 30.5 28 5 13 95º 28
(2.40) (0.39) 1/4” NPT (0.39) (1.20) (1.10) (0.20) (0.51) 95º (1.10)
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.

3/2 Lever Operated, Spring Return 3/2 Lever Operated, with Detent
2326M25-VR2B 2326B553VR2B

D D

2 2
View port V 12
10 12 10
øL øL

1 3 1 3

3 ports P 3 ports P
LCº LCº

LB LB

For basic valve dimensions, see 3/2 spring return and pilot air return bases on page 1500.7

Model Number D L LB LC P V
2326M25-VR2B 41.25 32 96 11.3º 1/4” NPT -
(1.62) (1.26) (3.78) 11.3º 1/4” NPT -
2326B553VR2B 41.25 32 96 11.3º 1/4” NPT 1/8” NPT
(1.62) (1.26) (3.78) 11.3º 1/4” NPT 1/8” NPT

www.midland-acs.com
1500.19 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 20

1500 Spool Valves

SPOOL VALVES • 1/4”, 5/2, NPT (BSP) 1500 SERIES
1500

MANUALLY OPERATED (SWITCH), MANUALLY OPERATED (LEVER)

INSTALLATION DIMENSIONS mm (inches)

5/2 Switch Operated, Spring Return with Detent.

5/2 Switch Operated, Spring Return.
2526B00-VR2B
PNEUMATIC VALVES

2526B20-VR2B

D
R
SA
2 4 K øY
Vent port V SC

14 SBº
12

3 1 5
5 ports P
Back nut A/F hexagon HA Bezel nut A/F hexagon HB
Maximum Panel Thickness PT

For basic valve dimensions, see 5/2 spring return bases on page 1500.7

Model Number D K P R HA HB PT SA SB SC V
2526B00-VR2B 61 10 1/4” NPT 10 30.5 28 5 13 95º 28 1/8” NPT
(2.40) (0.39) 1/4” NPT (0.39) (1.20) (1.10) (0.20) (0.51) 95º (1.10) 1/8” NPT
Panel mounting thread øY is 15/16” dia. x 26 TPI Whit Form.

5/2 Lever Operated, Spring Return. 5/2 Lever Operated, with Detent.
2526M25-VR2B 2526B553VR2B

5 ports P D 5 ports P D
2 4 2 4
Vent port V 14 Vent port V 14
12
øL øL
12

3 1 5 3 1 5
LCº LCº

LB
LB

For basic valve dimensions, see 5/2 spring return bases on page 1500.7

Model Number D L LB LC P V
2526M25-VR2B 41.25 32 96 11.3º 1/4” NPT 1/8” NPT
(1.62) (1.26) (3.78) 11.3º 1/4” NPT 1/8” NPT
2526B553VR2B 41.25 32 96 11.3º 1/4” NPT 1/8” NPT
(1.62) (1.26) (3.78) 11.3º 1/4” NPT 1/8” NPT

www.midland-acs.com
1500.20 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES

1600
PILOT SOLENOID OPERATED

General Description Technical Data

A range of compact 3/2 and 5/2 Ports
pilot solenoid operated spool valves • 1/2” NPT (BSP option available)
in Stainless Steel for use on gases
and liquids. • 1/8" NPT pilot ports
Working Pressure (gases & liquids)

SPOOL VALVES
• Hazardous area solenoids.
• Coil with 316 or aluminium housing • Single Solenoid Valves
• Block before bleed. 3 to 12 bar (45 to 174 psi)
• ATEX approved. • Double Solenoid Valves
• UL Listed CSA approvals. 2 to 12 bar (30 to 174 psi)
Cv (Kv)
Operating Medium • 3/2 valves - 3.5 (53)
• 5/2 valves - 3.5 (53)
Gases
Working Temperature
Filtered non-lubricated air, • Valve only Construction Materials
inert gas, sweet (natural) gases. • Stainless Steel AISI 316L
-20ºC to +180ºC (-4ºF to +356ºF)
Sour gas option available to NACE MR-01-75 Body
• Solenoid - Ambient temperature
(details on application) • Stainless Steel AISI 316L
-20ºC to +180ºC (-4ºF to +149ºF)
to NACE MR-01-75 Spool
Liquids Minimum Pilot Pressure • 316 Stainless Steel Spring
Low pressure hydraulic, mineral • At 6.3 bar (90 psi) body pressure • Fluoroelastomer Seals
oil or water. Pilot Return - 2.0 bar (30.0 psi) • Refer to solenoid specification
Maximum Flow
Instrument Signals
Functional Symbols • 6 bar (87 psi), 1 bar Valves with side mounted solenoids
3/2 3/2 5/2 (14.5 psi) differential can be supplied to operate on
Normally Closed Diverter
2 • 3/2 valves - 3500 L/min (123 SCFM) instrument signals, typically 0 to
• 5/2 valves - 3500 L/min (123 SCFM) 1.5 bar (0 to 21 psi). A separate
1 3 supply to the pilot solenoid is
3/2 3/2 necessary. This supply is 2 bar
Normally Open Changeover (30 psi) minimum for the double
pilot and 3 bar (45 psi) minimum
for the single pilot.

MODEL CODES
3/2 Valves

4326 1 2 3 4 5 –S2B 6 7 Voltage Codes

C = 12v DC
D = 24v DC
Size Operator Operator Accessories Body / Seals Solenoid Type M = 110v 50/60Hz AC
B = Bi stable (LH or Top) (RH or Bottom) - = None V = Stainless Steel / See solenoid N = 120v 60Hz AC
M = Mono 1 = Air 3 = Side solenoid 2 = Latch lock, Fluorelastomer model codes Q = 240v 60Hz AC
stable 2 = Spring Manual reset 1500.2 S = 220/230v 50/60Hz AC
4 = Side solenoid 8 = Reverse latch Y = 28v DC
(solenoid type T only)
lock, Manual
other voltages special order
reset

5/2 Valves

4526 1 2 3 4 5 –S2B 6 7 Voltage Codes

C = 12v DC
D = 24v DC
Size Operator Operator Accessories Body / Seals Solenoid Type M = 110v 50/60Hz AC
B = Bi stable (LH or Top) (RH or Bottom) – = None V = Stainless Steel / See solenoid N = 120v 60Hz AC
M = Mono 1 = Air 3 = Side solenoid 2 = Latch lock, Fluorelastomer model codes Q = 240v 60Hz AC
stable 2 = Spring Manual reset 1500.2 S = 220/230v 50/60Hz AC
4 = Side solenoid 8 = Reverse latch Y = 28v DC
(solenoid type T only)
lock, Manual
other voltages special order
reset

www.midland-acs.com
1600.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES
1600

PILOT SOLENOID OPERATED

SOLENOID MODEL CODES

Model Safety Protection and Approved Ingress Weight

Code Rating Housing Material Area Protection kg (lbs)
D EExd II T5 Flameproof Cast Iron Zones 1 & 2 IP65 1.30 (2.86)
SPOOL VALVES

Class I, Groups C & D

CL NEMA 7 & 9 Flameproof, 3316 Stainless Steel NEMA 4 0.29 (0.65)
Class III Groups E, F & G
K EExdIIC T6 Flameproof, 316 Stainless Steel Zones 1 and 2 IP67 1.62 (3.57)
P EEme II T4/T5 Increased Encapsulation, Glass Reinforced Polyamid. Zones 1 and 2 IP66 0.63 (1.39)
T EExia IIC T6 Intrinsically Safe. Glass Reinforced Polyamid. Zones 0 IP66 0.53 (1.17)
4 IP65 Solenoid Not Approved IP65 0.085 (0.19)
The model code shown appears in the 13th position of the model number.

Preferred models

Model Number Description Weight kg (lbs) Symbol

2
4326M23-VS2B * + 1/2" NPT 3/2 Pilot solenoid operated, spring return 1.50 (3.31) + Sol 10 12
1 3

2
4326M232VS2B * + 1/2" NPT 3/2 Pilot solenoid operated, spring return 2.10 (4.63) + Sol 10 12
with latch lock, manual reset 1 3

2
4326M238VS2B * + 1/2" NPT 3/2 Pilot solenoid operated, spring return 2.10 (4.63) + Sol 10 12
with reverse latch lock, manual reset 1 3

2
4326B13-VS2B * + 1/2" NPT 3/2 Pilot solenoid operated, pilot air return 1.60 (3.53) + Sol 10 12
1 3
2
4326B33-VS2B * + 1/2" NPT 3/2 Double pilot solenoid operated 1.70 (3.75) + Sol 10 12
1 3

Preferred models
Model Number Description Weight kg (lbs) Symbol
2 4
4526M23-VS2B * + 1/2" NPT 5/2 Pilot solenoid operated,spring return 2.10 (4.63) + Sol 12 14
3 1 5
2 4
4526M232VS2B * + 1/2" NPT 5/2 Pilot solenoid operated,spring return 2.70 (5.95) + Sol 12 14
with latch lock, manual reset 3 1 5

2 4
4526M238VS2B * + 1/2" NPT 5/2 Pilot solenoid operated,spring return 2.70 (5.95) + Sol 12 14
with reverse latch lock, manual reset 3 1 5

2 4
4526B13-VS2B * + 1/2" NPT 5/2 Pilot solenoid operated, pilot air return 2.20 (4.85) + Sol 12 14
3 1 5
2 4
4526B33-VS2B * + 1/2" NPT 5/2 Double pilot solenoid operated 2.30 (5.07) + Sol 12 14
3 1 5

* Specify solenoid type, + Specify solenoid voltage, Without solenoid fitted specify “Z” in position “13” (for Zones 0, 1 & 2)
Without solenoid fitted specify “A” in position “13” (for NEMA 7 & 9)

www.midland-acs.com
1600.2 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES

1600
PILOT SOLENOID OPERATED

3/2 and 5/2 Spool Valves

Solenoid code K Solenoid code D Solenoid code P (EEx me II CL (NEMA 7 & 9) Solenoid code 4
(EExd IIC T6) (EExd IIc T5) T4/T5) Solenoid code T (None hazardous)
(EEx ai IIC T6)

SPOOL VALVES
G F Solenoid F
exhaust Solenoid F G Solenoid G Solenoid F G F G DIN
Silencer port SP exhaust exhaust exhaust Solenoid plug
port SP port SP port SP exhaust
port SP
A
A A
A A

R
R

B
B

D D
C C
3/2 valve base. For basic valve dimensions see page 1600.4 5/2 valve base. For basic valve dimensions see page 1600.4

INSTALLATION DIMENSIONS mm (inches)

Model Code A B C D F G R SP
CL 42 (1.65) 41 (1.61) 32 (1.26) 32 (1.26) 18 (0.71) 40 (1.57) 16 (0.63) 1/8” NPT

D 76 (2.99) 41 (1.61) 32 (1.26) 32 (1.26) 25 (0.98) 84 (3.31) 16 (0.63) 1/8” NPT

K 110 (4.33) 41 (1.61) 32 (1.26) 32 (1.26) 52 (2.05) 58 (2.28) 16 (0.63) M8

P&T 71.5 (2.81) 41 (1.61) 32 (1.26) 32 (1.26) 25 (0.98) 81 (3.19) 16 (0.63) 1/8” NPT

4 57 (2.24) 39 (1.54) 26 (1.02) 21 (0.83) 19.5 (0.77) 50 (1.97) 11 (0.43) 1/8” NPT

SOLENOID SPECIFICATIONS
Model Code K D P T CL 4

Type of Protection EExd IIC T6 EExd IIc T5 EEx me II T4/T5 EEx ia IIc T6 NEMA 7 & 9 None

Approved Area Zones 1 and 2 Zones 1 and 2 Zones 1 and 2 Zone 0 Class I, Groups C & D, None
Class II Groups E, F & G

Degree of Protection IP67 IP67 IP66 IP66 NEMA 4 (IP55) IP65

Housing 316 Stainless Steel Ferritic, Cast Iron Glass reinforced Glass reinforced Stainless Molded
alt Aluminium Epoxy painted Polyamid Polyamid Steel Plastic
Epoxy coated Epoxy coated (St St conduit hub) Polyamid Coil potted

Cable entry M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 1/2" NPT DIN plug
(Alt cable entry available) 24" leads

Power DC 5W 8W 6W 0.3W 1.8W 9W

Consumption AC 5W 1.8W 9W(holding)

Maximum Admissable 85ºC (185ºF) 100ºC (212ºF) T4 135ºC (275ºF) 85ºC (185ºF) 160ºC (320ºF) N/A
Surface Temp T5 100ºC (212ºF)

Maximum Ambient 40ºC (104ºF) 40ºC (104ºF) T4 75ºC (167ºF) 65ºC (149ºF) 40ºC (104ºF) 55ºC (131ºF)
Temperature T5 40ºC (104ºF)

Maximum Fluid Temp 80ºC (176ºF) 75ºC (167ºF) 75ºC (167ºF) 75ºC (167ºF) 105ºC (221ºF) 75ºC (167ºF)

Approved Standard ATEX ATEX ATEX ATEX UL Listed N/A

CSA Certified N/A

Certificate Number SIRA03ATEX1319 02ATEX6008X 02ATEX6023X 02ATEX6066X 026894X0000 N/A

www.midland-acs.com
1600.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES
1600

PILOT SOLENOID OPERATED

INSTALLATION DIMENSIONS mm (inches)
3/2 Pilot Solenoid Operated - Valve Bases

Spring Return Spring Return with Latch Lock Pilot Air Return Pilot Solenoid Return
4326M23-VS2B** 4326M232VS2B** 4326M238VS2B** 4326B13-VS2B** 4326B33-VS2B**
SPOOL VALVES

øR

B C B C C
3 mounting 3 mounting 3 mounting
E E holes øG E holes øG
holes øG
2 2
S C
M M F N
sq ØD F N sq ØD F N

M
1 3 1 3 1 3
H H 3 ports P H H 3 ports P H H 3 ports P
T H H 3 ports P
J J J
B J
Body Thickness = ‘M’ Dimensions ‘E’, ‘F’, and ‘G’ and ‘N’ as for spring return base Body Thickness = ‘M’ Body Thickness = ‘M’

Model Number B C D E F G H J M N P PP R S T
4326M23-VS2B** 40 65 24 45 50 6.5 19.5 32.5 38 62 1/2" NPT - - - -
(1.57) (2.56) (0.94) (1.77) (1.97) (0.26) (0.77) (1.28) (1.50) (2.44) 1/2" NPT - - - -
4326M232VS2B** 75 65 - 45 50 6.5 19.5 32.5 38 62 1/2" NPT - 32 93 26
(2.95) (2.56) - (1.77) (1.97) (0.26) (0.77) (1.28) (1.50) (2.44) 1/2" NPT - (1.26) (3.66) (1.02)
4326M238VS2B** 75 65 - 45 50 6.5 19.5 32.5 38 62 1/2" NPT - 32 93 26
(2.95) (2.56) - (1.77) (1.97) (0.26) (0.77) (1.28) (1.50) (2.44) 1/2" NPT - (1.26) (3.66) (1.02)
4326B13-VS2B** 32 65 - 45 50 6.5 19.5 32.5 38 62 1/2" NPT 1/8" NPT - - -
(1.26) (2.56) - (1.77) (1.97) (0.26) (0.77) (1.28) (1.50) (2.44) 1/2" NPT 1/8" NPT - - -
4326B33-VS2B** - 65 - 45 50 6.5 19.5 32.5 38 62 1/2" NPT - - - -
- (2.56) - (1.77) (1.97) (0.26) (0.77) (1.28) (1.50) (2.44) 1/2" NPT - - - -

5/2 Pilot Solenoid Operated - Valve Bases

Spring Return Spring Return with Latch Lock Pilot Air Return Pilot Solenoid Return
4526M23-VS2B** 4526M232VS2B** 4526M238VS2B** 4526B13-VS2B** 4526B33-VS2B**
øR

B C B C C
3 mounting 3 mounting 3 mounting
E holes øG H holes øG H holes øG
C
S 1 pilot
2 4 port PP 2 4 2 4

M
ØD N M
F N
sq F N sq F N
3 1 5

3 1 5 3 1 5 3 1 5
T H 5 ports P
E 5 ports P E 5 ports P E 5 ports P
B H H
H H H H H H

Body Thickness = ‘M’ Dimensions ‘E’, ‘F’, and ‘G’ and ‘N’ as for spring return base Body Thickness = ‘M’ Body Thickness = ‘M’

Model Number B C D E F G H M N P PP R S T
4526M23-VS2B** 40 103 24 38 50 6.5 38.5 38 62 1/2" NPT - - - -
(1.57) (4.06) (0.94) (1.50) (1.97) (0.26) (1.52) (1.50) (2.44) 1/2" NPT - - - -
4526M232VS2B** 75 103 - 38 50 6.5 38.5 38 62 1/2" NPT - 32 93 26
(2.95) (4.06) - (1.50) (1.97) (0.26) (1.52) (1.50) (2.44) 1/2" NPT - (1.26) (3.66) (1.02)
4526M238VS2B** 75 103 - 38 50 6.5 38.5 38 62 1/2" NPT - 32 93 26
(2.95) (4.06) - (1.50) (1.97) (0.26) (1.52) (1.50) (2.44) 1/2" NPT - (1.26) (3.66) (1.02)
4526B13-VS2B** 32 103 - 38 50 6.5 38.5 38 62 1/2" NPT 1/8" NPT - - -
(1.26) (4.06) - (1.50) (1.97) (0.26) (1.52) (1.50) (2.44) 1/2" NPT 1/8" NPT - - -
4526B33-VS2B** - 103 - 38 50 6.5 38.5 38 62 1/2" NPT - - - -
- (4.06) - (1.50) (1.97) (0.26) (1.52) (1.50) (2.44) 1/2" NPT - - - -

www.midland-acs.com
1600.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES

1600
PILOT OPERATED
General Description Technical Data
A range of compact 3/2 and 5/2 pilot
operated spool valves in stainless steel Ports
for use on gases and liquids. • 1/2"NPT (BSP option available)
• Compact. • 1/8" NPT pilot ports

SPOOL VALVES
• 3/2 and 5/2 versions. Working Pressure (gases & liquids)
• Non lube. • 12 bar (174 psi)
• Meet NACE standard. Cv (Kv)
• Stainless steel internals. • 3/2 valves 3.5 (53)
Operating Medium • 5/2 valves 3.5 (53)
Working Temperature
Gases • -20ºC to +180ºC (-4ºF to +356ºF)
Filtered lubricated or non-lubricated
Minimum Pilot Pressure
air, inert gas, sweet (natural) gases.
• At 6.3 bar (90psi) body pressure
Sour gas option available
3/2 and 5/2
(details on application)
Spring return 3 bar (45psi)
Liquids Pilot return 2 bar (30psi)
Low pressure hydraulic, Construction Materials
mineral oil or water.
Maximum Flow • Stainless Steel AISI 316L
• 6 bar (87 psi), 1 bar (14.5 psi) to NACE MR-01-75 Body
Functional Symbols differential • Stainless Steel AISI 316L
3/2 3/2 5/2 • 3/2 - 3500 L/min (123 SCFM)
Normally Closed Diverter to NACE MR-01-75 Spool
• 5/2 - 3500 L/min (123 SCFM) • 316 Stainless Steel Spring
• Fluoroelastomer Seals
3/2 3/2
Normally Open Changeover

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2

4326M21-VS2B 1/2" NPT 3/2 Pilot operated, spring return 1.40 (3.09) 10 12
1 3

4326M212VS2B 1/2" NPT 3/2 Pilot operated, spring return 2.00 (4.41) 10
2
12
with latch lock, manual reset 1 3

2
4326M218VS2B 1/2" NPT 3/2 Pilot operated, spring return 2.00 (4.41) 10 12
with reverse latch lock, manual reset 1 3

2
4326B11-VS2B 1/2" NPT 3/2 Pilot operated, pilot return 1.50 (3.31) 10 12
1 3
2 4
4526M21-VS2B 1/2" NPT 5/2 Pilot operated, spring return 2.00 (4.41) 12 14
3 1 5

4526M212VS2B 1/2" NPT 5/2 Pilot operated, spring return 2.60 (5.73) 12
2 4
14
with latch lock, manual reset 3 1 5

4526M218VS2B 1/2" NPT 5/2 Pilot operated, spring return 2.60 (5.73) 12
2 4
14
with reverse latch lock, manual reset 3 1 5

2 4
4526B11-VS2B 1/2" NPT 5/2 Pilot operated, pilot return 2.10 (4.63) 12 14
3 1 5

www.midland-acs.com
1600.5 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 6

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES
1600

PILOT OPERATED
INSTALLATION DIMENSIONS mm (inches)

3/2 Pilot Solenoid Operated - Spring or Pilot Return

Pilot Operated, Spring Return Pilot Operated, Pilot Return Pilot Operated, Spring Return with Latch Lock
4326M21-VS2B 4326B11-VS2B 4326M212VS2B, 4326M218VS2B
SPOOL VALVES

A A

D D D
2 2

12
12 10 12 10
10
1 3
1 pilot
port PP
1 pilot 1 pilot 1 pilot 3 ports P
1 3 port PP 1 3 port PP
port PP
3 ports P 3 ports P A

For basic valve dimensions, see 3/2 pilot return bases on page 1600.4

Model Number A D P PP
4326M21-VS2B 137 32 1/2" NPT 1/8" NPT
(5.39) (1.26) 1/2" NPT 1/8" NPT
4326B11-VS2B 129 32 1/2" NPT 1/8" NPT
(5.08) (1.26) 1/2" NPT 1/8" NPT
4326M212VS2B 172 32 1/2" NPT 1/8" NPT
& 4326M218VS2B (6.77) (1.26) 1/2" NPT 1/8" NPT

5/2 Pilot Solenoid Operated - Spring or Pilot Return

Pilot Operated, Spring Return Pilot Operated, Pilot Return Pilot Operated, Spring Return with Latch Lock
4526M21-VS2B 4526B11-VS2B 4526M212VS2B, 4526M218VS2B

A
A
D
D
2 4 D
2 4

12 14
12 14 12 14

3 1 5
1 pilot 1 pilot 3 1 5 1 pilot
3 1 5 port PP port PP port PP
3 ports P 5 ports P 1 pilot
3 ports P port PP

For basic valve dimensions, see 3/2 pilot return bases on page 1600.4

Model Number A D P PP
4526M21-VS2B 175 32 1/2" NPT 1/8" NPT
(6.89) (1.26) 1/2" NPT 1/8" NPT
4526B11-VS2B 167 32 1/2" NPT 1/8" NPT
(6.57) (1.26) 1/2" NPT 1/8" NPT
4526M212VS2B 210 32 1/2" NPT 1/8" NPT
& 4526M218VS2B (8.27) (1.26) 1/2" NPT 1/8" NPT

www.midland-acs.com
1600.6 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 7

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES

1600
MANUALLY OPERATED (PAD)

General Description
A range of compact 3/2 and 5/2
manually operated spool valves

SPOOL VALVES
in stainless steel for use on gases
and liquids.
• Closed Center
• Compact
• Meets NACE

Operating Medium Technical Data

Ports
Gases • 1/4" – 1-1/2” NPT (BSP option available)
Filtered lubricated or non-lubricated • 1/4" NPT pilot ports
air, inert gas, sweet (natural) gases.
Working Pressure (gases & liquids)
Sour gas option available. • 12 bar (174 psi)
(details on application)
Cv (Kv)
Liquids • 3/2 valves 3.5 (53)
Low pressure hydraulic,
mineral oil or water. • 5/2 valves 3.5 (53)

Working Temperature
Functional Symbols • -20ºC to +160ºC (-4ºF to +356ºF) Construction Materials
3/2 3/2 5/2 • Stainless Steel AISI 316L
Normally Closed Diverter Operating Force
to NACE MR-01-75 Body
• 10 bar (145 psi), body pressure
• 3/2 112N (25 lbf) • Stainless Steel AISI 316L
• 5/2 112N (25 lbf) to NACE MR-01-75 Poppet
3/2 3/2
Normally Open Changeover • 316 Stainless Steel Spring
Maximum Flow • Fluoroelastomer Seals
• 6 bar (87 psi), 1 bar (14.5 psi)
differential
• 3/2 - 3500 L/min (94 SCFM)
• 5/2 - 3500 L/min (124 SCFM)

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2
4326M27-VS2B 1/2" NPT 3/2 Pad operated, spring return 1.35 (2.98) 10 12
1 3
2
4326B77-VS2B 1/2" NPT 3/2 Pad operated, push - pull 1.30 (2.87) 10 12
1 3
2
4326B773VS2B 1/2" NPT 3/2 Pad operated, push-pull with detent 1.40 (3.09) 10 12
1 3
2
4326B17-VS2B 1/2" NPT 3/2 Pad operated, pilot air return 1.50 (3.31) 10
1 3
12

2 4
4526M27-VS2B 1/2" NPT 5/2 Pad operated, spring return 1.95 (4.30) 12 14
3 1 5
2 4
4526B77-VS2B 1/2" NPT 5/2 Pad operated, push-pull 1.90 (4.19) 12 14
3 1 5
2 4
14
4526B773VS2B 1/2" NPT 5/2 Pad operated, push-pull with detent 2.00 (4.41) 12
3 1 5
2 4
4526B17-VS2B 1/2" NPT 5/2 Pad operated, pilot air return 2.10 (4.63) 12 14
3 1 5

www.midland-acs.com
1600.7 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 8

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, NPT (BSP) 1600 SERIES
1600

PILOT SOLENOID OPERATED

INSTALLATION DIMENSIONS mm (inches)

3/2 Pad Operated - Spring Return, Pad Operated (Push-Pull), Pad Operated Pilot Air Return
Pad Operated, Spring Return Pad Operated (Push-Pull) 4326B77-VS2B
4326M27-VS2B Pad Operated (Push-Pull) with detent 4326B773VS2B
SPOOL VALVES

Pad Operated, Pilot Air Return 4326B17-VS2B

D D
Travel T Travel T
2

10 A 10 A
12 12

1 3 1 pilot 1 3
port PP
3 ports P 3 ports P

For basic valve dimensions, see 3/2 spring return bases on page 1600.4 For basic valve dimensions, see 3/2 pilot air return bases on page 1600.4

Model Number A D P PP T
4326M27-VS2B 51 78 1/2" NPT - 9.5
(2.00) (3.07) 1/2" NPT - (0.37)
4326B77-VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)
4326B773VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)
4326B17-VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)

5/2 Pad Operated - Spring Return, Pad Operated (Push-Pull), Pad Operated Pilot Air Return
Pad Operated, Spring Return Pad Operated (Push-Pull) 4526B77-VS2B
4526M27-VS2B Pad Operated (Push-Pull) with Detent 4526B773VS2B
Pad Operated, Pilot Air Return 4526B17-VS2B

D D
Travel T Travel T
2

10 10
A A
12 12

1 3 1 pilot 1 3
port PP
3 ports P 3 ports P

For basic valve dimensions, see 5/2 spring return bases on page 1600.4 For basic valve dimensions, see 5/2 pilot air return bases on page 1600.4

Model Number A D P PP T
4526M27-VS2B 51 78 1/2" NPT - 9.5
(2.00) (3.07) 1/2" NPT - (0.37)
4526B77-VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)
4526B773VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)
4526B17-VS2B 51 78 1/2" NPT 1/8" NPT 9.5
(2.00) (3.07) 1/2" NPT 1/8" NPT (0.37)

www.midland-acs.com
1600.8 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 9

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, 5/2, NPT (BSP) 1600 SERIES

1600
MANUALLY OPERATED (LEVER)

General Description Technical Data

A range of compact 3/2 and 5/2 pilot Ports
operated spool valves in stainless • 1/2"NPT (BSP option available)
steel for use on gases and liquids. • 1/8" NPT vent port

SPOOL VALVES
• Closed Center
• Compact Working Pressure (gases & liquids)
• Unique Key • 12 bar (174 psi)
Operating Medium
Cv (Kv)
Gases • 3/2 valves 3.5 (53)
Filtered lubricated or non-lubricated • 5/2 valves 3.5 (53)
air, inert gas, sweet (natural) gases.
Sour gas option available Working Temperature
(details on application) • -20ºC to +180ºC (-4ºF to +356ºF)

Liquids
Operating Force
Low pressure hydraulic,
mineral oil or water. • 10 bar (145 psi), body pressure
• 3/2 61N (13.7 lbf)
Construction Materials
Functional Symbols • 5/2 61N (13.7 lbf)
• Stainless Steel AISI 316L
3/2 3/2 5/2
Normally Closed Diverter to NACE MR-01-75 Body
Maximum Flow
• 6 bar (87 psi), 1 bar (14.5 psi) • Stainless Steel AISI 316L
differential to NACE MR-01-75 Spool
3/2 3/2
Normally Open Changeover • 3/2 - 3500 L/min (123 SCFM) • 316 Stainless Steel Spring
• 5/2 - 3500 L/min (123 SCFM) • Fluoroelastomer Seals

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2
12
4326M25-VS2B 1/2" NPT 3/2 Lever operated, spring return 1.40 (3.09) 10
1 3

2
12
4326B553VS2B 1/2" NPT 3/2 Lever operated with detent 1.50 (3.31) 10
1 3
2 4
12 14
4526M25-VS2B 1/2" NPT 5/2 Lever operated, spring return 2.00 (4.41) 3 1 5

2 4
4526B553VS2B 1/2" NPT 5/2 Lever operated with detent 2.10 (4.63) 12 14
3 1 5

www.midland-acs.com
1600.9 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 10

1600 Spool Valves

SPOOL VALVES • 1/2”, 3/2, NPT (BSP) 1600 SERIES
1600

MANUALLY OPERATED LEVER

INSTALLATION DIMENSIONS mm (inches)

3/2 Lever Operated - Spring Return, Lever Operated with Detent

Lever Operated, Spring Return Lever Operated with Detent
4326M25-VS2B 4326B553VS2B
SPOOL VALVES

D D
2 2

10 10
øL øL
12 12

1 3 1 3
Vent port V
3 ports P 3 ports P LCº
LCº

LB LB

For basic valve dimensions, see 3/2 spring return bases on page 1600.4

Model Number D L LB LC P V
4326M25-VS2B 46 32 117 210 1/2" NPT -
(1.81) (1.26) (4.61) 210 1/2" NPT -
4326B553VS2B 46 32 117 210 1/2" NPT 1/8" NPT
(1.81) (1.26) (4.61) 210 1/2" NPT 1/8" NPT

www.midland-acs.com
1600.10 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

1750 Poppet Valves

POPPET VALVES • 1/4”- 1 1/2”, 3/2, NPT (BSP) 1750 SERIES

1750
PILOT SOLENOID OPERATED

General Description Technical Data

A range of compact 3/2 pilot
solenoid operated poppet valves Ports
in Stainless Steel for use on gases • 1/4" - 1-1/2” NPT (BSP option available)
and liquids. • 1/4" NPT pilot ports

PNEUMATIC VALVES
• High flow. Working Pressure (gases & liquids)
• Hazardous area solenoids.
• Coil with 316 housing. • 3 to 12 bar (45 to 174 psi)
• ATEX Cv (Kv)
• UL / CSA • 1/4” - 1.75 (25) 3/8” - 2.2 (31)
• Low temperature range.
• 1/2” - 4.00 (57) 3/4” - 10.2 (146)
Operating Medium • 1” - 15.0 (214) 1-1/4” - 20.0 (286)
• 1-1/2” - 28.0 (400)
Gases Working Temperature
Filtered lubricated or non- • Valve only version
lubricated air, inert gas, sweet
-20ºC to +180ºC (-4ºF to +356ºF)
(natural) gases.
• Solenoid - Ambient temperature Construction Materials
sour gas option available.
(details on application) -20ºC to +65ºC (-4ºF to +149ºF) • Stainless Steel AISI 316L
• Low temperature version to NACE MR-01-75 Body
Liquids -50ºC (-58ºF ) (optional) • Stainless Steel AISI 316L
Low pressure hydraulic, mineral Minimum Pilot Pressure to NACE MR-01-75 Poppet
oil or water. • At 6.3 bar (90 psi) body pressure • 316 Stainless Steel Spring
(details on application) 1/4” - 3/8” Spring return • 1/4”, 3/8” and 1/2” Fluoroelastomer
Functional Symbols 4.0 bar (58.0 psi) 3/4”, 1”, 1-1/4” and 1-1/2” Nitrile
1/2” - 1-1/2” Spring return Solenoid
3/2 3/2
Normally Closed Diverter 3.0 bar (43.5 psi) • Refer to solenoid specification
Maximum Flow
• 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 3/2 • 1/4” - 2668 L/min (94 SCFM)
Normally Open Changeover
• 3/8” - 3521 L/min (124 SCFM)
• 1/2” - 6402 L/min (226 SCFM)
• 3/4” - 16005 L/min (565 SCFM)
• 1” - 24008 L/min (848 SCFM)
• 1-1/4” - 32010 L/min (1130 SCFM)
• 1-1/2” - 44814 L/min (1583 SCFM)

Model Code

1 32 2 –M2 3 4 C2B 5 Solenoid Type

See Solenoid Model
6 Voltage Codes
C = 12v DC
Codes on page 1500.2 D = 24v DC
Body Seals M = 110v 50/60Hz AC
Size Function Operator
V = St St / Fluoroelastomer N = 120v 60Hz AC
2 = 1/4” 3 = N/C 1 = Air
S = St St / Nitrile Q = 240v 60Hz AC
3 = 3/8” 5 = Universal 3 = N/C solenoid
E = St St / Low Temp S = 220/230v 50/60Hz AC
4 = 1/2” 4 = Univ solenoid
Y = 28v DC
6 = 3/4” E = End solenoid
(solenoid type T only)
8 = 1”
other voltages special order
5 = 1-1/4”
7 = 1-1/2”

www.midland-acs.com
1750.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

1750 Poppet Valves

POPPET VALVES • 1/4” - 1 1/2”, 3/2, NPT (BSP) 1750 SERIES
1750

PILOT SOLENOID OPERATED

SOLENOID MODEL CODES

Model Code Safety Rating Protection and Housing Material Approved Area Ingress Protection Weight kg (lbs)
PNEUMATIC VALVES

CL NEMA 7 & 9 Flameproof. Stainless Steel Class I, Groups C & D NEMA 4 0.29 (0.65)
Class II, Groups E, F & G

D EExd IIC T5 Flameproof. Ferritic cast iron. Zones 1 and 2 IP67 1.30 (2.87)

K EExd IIC T6 Flameproof. 316 Stainless Steel or Aluminium. Zones 1 and 2 IP67 1.62 (3.57)

P EEx me II T4/T5 Increased encapsulation. Glass reinforced polyamid. Zones 1 and 2 IP66 0.63 (1.39)

T EEx ia IIC T6 Intrinsically safe. Glass reinforced polyamid. Zones 0 IP66 0.53 (1.17)

4 None 32mm solenoid. Moulded Plastic. Not approved IP65 0.20 (0.44)

Preferred models
Model Number Description Weight kg (lbs) Symbol

2323M23-VC2B*+ 1/4” NPT 3/2 Pilot solenoid operated, spring return, N/C 0.65 (1.43) + Sol

2325M24-VC2B*+ 1/4” NPT 3/2 Pilot solenoid operated, spring return, UNIV 0.65 (1.98) + Sol

3323M23-VC2B*+ 3/8” NPT 3/2 Pilot solenoid operated, spring return, N/C 0.90 (3.31) + Sol

3325M24-VC2B*+ 3/8” NPT 3/2 Pilot solenoid operated, spring return, N/C 0.90 (3.31) + Sol

4323M23-VC2B*+ 1/2” NPT 3/2 Pilot solenoid operated, spring return, N/C 1.50 (19.97) + Sol
2

4325M24-SC2B*+ 1/2” NPT 3/2 Pilot solenoid operated, spring return, UNIV 1.50 (24.38) + Sol 10 12
1 3 SS
2

6325M24-SC2B*+ 3/4” NPT 3/2 Pilot solenoid operated, spring return, UNIV 5.06 (24.38) + Sol 10 12
1 3 SS
2

8325M24-SC2B*+ 1” NPT 3/2 Pilot solenoid operated, spring return, UNIV 5.06 (24.38) + Sol 10 12
1 3 SS
2

5325M24-SC2B*+ 1 1/4” NPT 3/2 Pilot solenoid operated, spring return, UNIV 9.06 (24.38) + Sol 10 12
1 3 SS
2

7325M24-SC2B*+ 1 1/2” NPT 3/2 Pilot solenoid operated, spring return, UNIV 11.06 (24.38) + Sol 10 12
1 3 SS

* Specify solenoid type

+ Specify solenoid voltage
Without solenoid fitted specify “Z” in position 13 (for Zones 0,1 & 2), ‘A’ in a position 13 (for NEMA 7 & 9).

1/4”, 3/8” and 1/2” Normally Closed versions have internal air supply to the solenoid - Specify code 3 in position 4 and code 3 in position 7 of model number code.
1/4”, 3/8” and 1/2” Normally Open and Universal versions require a separate air supply to the pilot solenoid - Specify code 5 in position 4 and code 4 in position 7 of model number code.
3/4” to 1 1/2” Normally Open, Normally closed and Universal versions always require a separate main air supply to be taken to the pilot solenoid - Specify code 5 in position 4 and code
4 of position 7 of model number code.

It is recommended that consideration be given to positioning a non-return valve in the separate supply line to the solenoid. This will help to prevent
back-flow from the solenoid servo should a temporary/severe pressure drop occur across the main valve when it opens.

www.midland-acs.com
1750.2 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

1750 Poppet Valves

POPPET VALVES • 1/4” - 1 1/2”, 3/2, NPT (BSP) 1750 SERIES

1750
PILOT SOLENOID OPERATED
SOLENOID ASSEMBLIES SOLENOID CODE K (EExd IIC T6), SOLENOID CODE KC (NEMA 7 & 9)

Solenoid code K Solenoid code D Solenoid code P Solenoid code CL Solenoid code 4
(EExd IIC T6) (EExd IIc T5) (EEx me II T4/T5) (NEMA 7 & 9) (None/hazardous)
Solenoid code T
(EEx ai IIC T6)

PNEUMATIC VALVES
G F Solenoid
exhaust Solenoid F G Solenoid F G Solenoid F G F G DIN
Silencer port SP exhaust exhaust exhaust Solenoid plug
port SP port SP port SP exhaust
port SP
AS
AS AS AS
AS

INSTALLATION DIMENSIONS mm (inches)

Model Code AS F G SP

CL 42(1.65) 18 (0.71) 40 (1.57) 1/8” NPT

D 76(2.99) 25 (0.71) 84 (1.57) 1/8” NPT

K 110(4.33) 52 (0.71) 58 (1.57) M8

P&T 71.5(2.81) 25 (0.71) 81 (1.57) 1/8” NPT

4 57(2.24) 19.5 (0.71) 50 (1.57) 1/8” NPT

SOLENOID SPECIFICATIONS
Model Code K D P T CL 4

Type of Protection EExd IIC T6 EExd IIc T5 EEx me II T4/T5 EEx ia IIc T6 NEMA 7 & 9 None

Approved Area Zones 1 and 2 Zones 1 and 2 Zones 1 and 2 Zone 0 Class I, Groups C & D, None
Class II Groups E, F & G

Degree of Protection IP67 IP67 IP66 IP66 NEMA 4 (IP55) IP65

Housing 316 Stainless Steel Ferritic, Cast Iron Glass reinforced Glass reinforced Chromate Stainless Molded
alt Aluminium Epoxy painted Polyamid Polyamid Steel Steel Plastic
Epoxy coated Epoxy coated (St St conduit hub) Coil potted

Cable entry M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 1/2" NPT DIN plug
(Alt cable entry available) 24" leads

Power DC 5W 8W 6W 0.3W 7.3W 1.8W 7.3W 1.8W 9W

Consumption AC 5W 5.6W 1.8W 5.6W 1.8W 9W(inrush 32VA)

Maximum Admissable 85ºC (185ºF) 100ºC (212ºF) T4 135ºC (275ºF) 85ºC (185ºF) 160ºC (320ºF) N/A
Surface Temp T5 100ºC (212ºF)

Maximum Ambient 40ºC (104ºF) 40ºC (104ºF) T4 75ºC (167ºF) 65ºC (149ºF) 40ºC (104ºF) 55ºC (131ºF)
Temperature T5 40ºC (104ºF)

Maximum Fluid Temp 80ºC (176ºF) 75ºC (167ºF) 75ºC (167ºF) 75ºC (167ºF) 105ºC (221ºF) 75ºC (167ºF)

Approved Standard ATEX ATEX ATEX ATEX UL Listed N/A

CSA Certified N/A

Certificate Number SIRA03ATEX1319 02ATEX6008X 02ATEX6023X 02ATEX6066X 026894X0000 N/A

www.midland-acs.com
1750.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

1750 Poppet Valves

POPPET VALVES • 1/4” - 1 1/2”, 3/2, NPT (BSP) 1750 SERIES
1750

PILOT SOLENOID OPERATED

INSTALLATION DIMENSIONS mm (inches)

3/2 Pilot Solenoid Operated - Spring Return, 1/4”, 3/8”, 1/2” Valve Bases
2323M23-VC2B*+ 2323M24-VC2B*+
3323M23-VC2B*+ 3323M24-VC2B*+
4323M23-VC2B*+ 4323M24-VC2B*+
PNEUMATIC VALVES

V+AS V+AS

T V V
W

3 ports P 3 ports P Solenoid

R S S supply
port SS
(See note)
For solenoid dimensions, see page 1750.3

Model Number P R S T V VE W X SS
2323M23-VC2B*+ 1/4” NPT (1/4” NPT) 32 (1.26) 32(1.26) 39(1.54) 41(1.61) - - - -
2325M24-VC2B*+ 1/4” NPT (1/4” NPT) - 32(1.26) - 41(1.61) - 26(1.02) - 1/8”NPT(1/8” NPT)
3323M23-VC2B*+ 3/8” NPT (3/8” NPT) 32 (1.26) 32(1.26) 39(1.54) 41(1.61) - - - -
3325M24-VC2B*+ 3/8” NPT (3/8” NPT) - 32(1.26) - 41(1.61) - 26(1.02) - 1/8”NPT(1/8” NPT)
4323M23-VC2B*+ 1/2” NPT (1/2” NPT) 38 (1.50) 32(1.26) 45(1.77) 50(1.97) - - - -
4325M24-VC2B*+ 1/2” NPT (1/2” NPT) - 32(1.26) - 50(1.97) - 37(1.46) - 1/8”NPT(1/8” NPT)
1/4”, 3/8” and 1/2” Normally closed versions have internal air supply to the solenoid - Specify code 3 in position 4 and code 3 in position 7 of model number code.
1/4”, 3/8” and 1/2” Normally open and Universal versions require a separate air supply to the pilot solenoid - Specify code 5 in position 4 and code 4 in position 7 of model number code.

3/2 Pilot Solenoid Operated - Spring Return, 3/4”, 1”, 1-1/4”, 1-1/2” Valve Bases
6323M24-SC2B*+
8323M24-SC2B*+
5323M24-SC2B*+ Z V+AS
7323M24-SC2B*+ Y

1 N/C 3 N/C
3 N/O 1 N/O
3 ports P Solenoid mounting

Solenoid supply
port SS (See note)

For basic valve dimensions, see page 1750.6 For Solenoid dimensions see page 1750.3

Model Number P Y Z SS
6325M24-SC2B*+ 3/4” NPT (1/4” NPT) 14 (0.55) 72(2.83) 1/4”NPT(1/4” NPT)
8325M24-SC2B*+ 1”NPT (1/4” NPT) 14 (0.55) 72(2.83) 1/4”NPT(1/4” NPT)
5325M24-SC2B*+ 1 1/4” NPT (1 1/4” NPT) 14 (0.55) 73(2.87) 1/4”NPT(1/4” NPT)
7325M24-SC2B*+ 1 1/2” NPT (1 1/2” NPT) 14 (0.55) 73(2.87) 1/4”NPT(1/4” NPT)
3/4” to 1 1/2” Normally open, normally closed and universal versions always require a separate mains air supply to be taken to the pilot solenoid.
Specify code 5 in position 4 and code 4 of position 7 of model number code.

www.midland-acs.com
1750.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

1750 Poppet Valves

POPPET VALVES • 1/4” – 1-1/2”, 3/2, NPT (BSP) 1750 SERIES

1750
PILOT AIR OPERATED

General Description Technical Data

A range of compact 3/2 pilot Ports
operated high flow poppet valves
• 1/4" – 1-1/2” NPT (BSP option available)
in stainless steel for use on gases.
• 1/4" NPT pilot ports
• Compact

PNEUMATIC VALVES
Working Pressure (gases & liquids)
• High flow
• 2 to 12 bar (30 to 174 psi)
• 3/2 N/O, N/C and Universal
Cv (Kv)
• Meet NACE standard
• 1/4” - 1.75 (25) 3/8” - 2.2 (31)
• Non lube
• 1/2” - 4.00 (57) 3/4” - 10.2 (146)
• Low temperature range
• 1” - 15.0 (214) 1-1/4” - 20.0 (286)
Operating Medium • 1-1/2” - 28.0 (400)
Working Temperature
Gases • -20ºC to +180ºC (-4ºF to +356ºF)
Filtered lubricated or Low temperature version
non-lubricated air, inert, • -50ºC (-58ºF ) (optional)
sweet (natural) gases. Minimum Pilot Pressure
Sour gas option available. • At 6.3 bar (90 psi) body pressure
(details on application) 1/4” - 3/8” Spring return
4.0 bar (58.0 psi)
Liquids
1/2” - 1-1/2” Spring return
Low pressure hydraulic,
mineral oil or water. 3.0 bar (43.5 psi)
(details on application) Maximum Flow Construction Materials
• 6 bar (87 psi), 1 bar (14.5 psi) • Stainless Steel AISI 316L
differential to NACE MR-01-75 Body
Functional Symbols • 1/4” - 2668 L/min (94 SCFM) • Stainless Steel AISI 316L
3/2 3/2 • 3/8” - 3521 L/min (124 SCFM) to NACE MR-01-75 Poppet
Normally Closed Diverter
• 1/2” - 6402 L/min (226 SCFM) • 316 Stainless Steel Spring
• 3/4” - 16005 L/min (565 SCFM) • 1/4”, 3/8” and 1/2”
• 1” - 24008 L/min (848 SCFM) Fluoroelastomer seals
3/2 3/2
Normally Open Changeover • 1-1/4” - 32010 L/min (1130 SCFM) • 3/4”, 1”, 1-1/4” and 1-1/2”
• 1-1/2” - 44814 L/min (1583 SCFM) Nitrile seals

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2325M21-VC2B 1/4” NPT 3/2 Pilot air operated, spring return, UNIV 0.65 (1.43)

3325M21-VC2B 3/8” NPT 3/2 Pilot air operated, spring return, UNIV 0.90 (1.98)

4325M21-VC2B 1/2” NPT 3/2 Pilot air operated, spring return, UNIV 1.50 (3.31)

6325M21-SC2B 3/4” NPT 3/2 Pilot air operated, spring return, UNIV 5.00 (11.0)

8325M21-SC2B 1” NPT 3/2 Pilot air operated, spring return, UNIV 5.00 (11.0)

5325M21-SC2B 1-1/4” NPT 3/2 Pilot air operated, spring return, UNIV 9.00 (19.8)

7325M21-SC2B 1-1/2” NPT 3/2 Pilot air operated, spring return, UNIV 11.0 (24.3)

www.midland-acs.com
1750.5 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 6

1750 Poppet Valves

POPPET VALVES • 1/4” – 1-1/2”, 3/2, NPT (BSP) 1750 SERIES
1750

PILOT AIR OPERATED

INSTALLATION DIMENSIONS mm (inches)
3/2 Pilot Air Operated - Spring Return, 1/4”, 3/8”, 1/2”
2325M21-VC2B 4325M21-VC2B
3325M21-VC2B
B A
PNEUMATIC VALVES

D 3 Mounting G
holes øF B A
2 3 Mounting
D holes øF G
Pilot port PP 2

H L J 12 N/C Pilot port PP

10 N/O
H L J 12 N/C
10 N/O

1 N/C, 3 N/O 3 N/C, 1 N/O

3 ports P
M 1 N/C, 3 N/O 3 N/C, 1 N/O
M 3 ports P
C E
C E

øN

Model Number A B C D E F G H J L M N P PP
2325M21-VC2B 24 54 10 32 27 6.5 26 44.5 35 32 28 - 1/4” NPT 1/8” NPT
(0.94) (2.13) (0.39) (1.26) (1.06) (0.26) (1.02) (1.75) (1.38) (1.26) (1.10) - 1/4” NPT 1/8” NPT
3325M21-VC2B 24 54 10 32 27 6.5 38 51 44 32 28 - 3/8” NPT 1/8” NPT
(0.94) (2.13) (0.39) (1.26) (1.06) (0.26) (1.50) (2.00) (1.73) (1.26) (1.10) - 3/8” NPT 1/8” NPT
4325M21-VC2B 32 65 28 38 32.5 6.5 45 63.5 50 38 36 24 1/2” NPT 1/8” NPT
(1.26) (2.56) (1.10) (1.50) (1.28) (0.26) (1.77) (2.50) (1.97) (1.50) (1.42) (0.94) 1/2” NPT 1/8” NPT

3/2 Pilot Air Operated - Spring Return, 3/4”, 1”, 1-1/4”, 1-1/2”
6325M21-SC2B
8325M21-SC2B C B A D
2
5325M21-SC2B
7325M21-SC2B

Pilot port V Pilot port PP

12 N/C H L
J 10 N/O

1 N/C, 3 N/O 3 N/C, 1 N/O

Mounting hole øF
E

3 ports P M Vent port V

M

Model Number A B C D E F H J L M P PP V
6325M21-SC2B 66 106 22 63.5 53 11 96 23 63.5 30 3/4” NPT 1/4” NPT 1/4” NPT
(2.60) (4.17) (0.87) (2.50) (2.09) (0.43) (3.78) (0.91) (2.50) (1.18) 3/4” NPT 1/4” NPT 1/4” NPT
8325M21-SC2B 66 126 22 63.5 63 11 96 23 63.5 35 1” NPT 1/4” NPT 1/4” NPT
(2.60) (4.96) (0.87) (2.50) (2.48) (0.48) (3.78) (0.91) (2.50) (1.38) 1” NPT 1/4” NPT 1/4” NPT
5325M21-SC2B 67 155 18 76 77.5 11 116 28.5 76 42.5 1-1/4” NPT 1/4” NPT 1/4” NPT
(2.64) (6.10) (0.71) (2.99) (3.05) (0.43) (4.57) (1.12) (2.99) (1.67) 1-1/4” NPT 1/4” NPT 1/4” NPT
7325M21-SC2B 67 180 18 76 90 11 116 28.5 76 50 1-1/2” NPT 1/4” NPT 1/4” NPT
(2.64) (7.09) (0.71) (2.99) (3.54) (0.43) (4.57) (1.12) (2.99) (1.97) 1-1/2” NPT 1/4” NPT 1/4” NPT

www.midland-acs.com
1750.6 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 7

1750 Poppet Valves

1/8" NPT 3/2 POPPET VALVES 1750 SERIES

1750
PLUNGER OPERATED, LEVER ROLLER OPERATED

General Description
Compact 3/2 mechanically operated
poppet valves in stainless steel for
use on gases and liquids.

PNEUMATIC VALVES
For N/O, N/C and universal operation.

Technical Data
Ports
• 1/8"NPT (BSP option available)
Working Pressure (gases & liquids)
• 10 bar (145 psi)
Cv (Kv)
• 0.26 (3.7)
Working Temperature
• -20ºC to +180ºC (-4ºF to +356ºF)
Operating force
• at 10 bar (145 psi) body pressure
N/C N/O Construction Materials
Plunger 44N (17lbf) 80N (20lbf) • Body, operator and poppet
Lever roller 20N (17lbf) 36N (20lbf) Stainless steel AISI 316L
to NACE MR-01-75
Maximum Flow • 316 Stainless steel springs
• At 6 bar (87 psi), 1 bar (14.5 psi) differential • Fluoroelastomer seals
402 L/min (14.2 SCFM)

Preferred Models

Model Number Description Weight kg (lbs) Symbol

2

1323M62-SM2B 1/8" Plunger operated,spring return, N/C 0.21 (0.46) 10

12
1 3
2

1324M62-SM2B 1/8" Plunger operated,spring return, N/O 0.22 (0.48) 12

10
1 3
2

1323M82-SM2B 1/8" Lever operated,spring return, N/C 0.28 (0.62) 10

12
1 3
2

1324M82-SM2B 1/8" Lever operated,spring return, N/O 0.29 (0.64) 12

1 3 12

www.midland-acs.com
1750.7 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 8

1750 Poppet Valves

1/8" NPT 3/2 POPPET VALVES 1750 SERIES
1750

PLUNGER OPERATED, LEVER ROLLER OPERATED

INSTALLATION DIMENSIONS mm (inches)
3/2 Plunger Operated - Spring Return - 1/8”
1323M62-SM2B
1324M62-SM2B
PNEUMATIC VALVES

H Travel
T

2 mounting holes
M4 x 5 deep

3 Ports P K
3 N/C A
1 N/O
2 mounting holes to suit
2 M4 cap head screws J
E
F
1 N/C D
3 N/O

G C R

Model Number A B C D E F G H J K L M N P R T
132*M62-SM2B 62 32 22 9 16 16 22 24 34 10 - - - 1/8" NPT 5 5
(2.44) (1.26) (0.87) (0.35) (0.63) (0.63) (0.87) (0.95) (1.34) (0.39) - - - 1/8" NPT (0.20) (0.20)
Travel T = 2.5 (0.10) to operate, 5.0 (0.20) maximum

3/2 Lever Operated - Spring Return - 1/8”

1323M82-SM2B
1234M82-SM2B

ØL

Travel T

A 2 mounting holes to suit

M4 cap head screws

3 ports P
E
F
D

Other dimensions
R as for plunger
G operated version

N M

Model Number A B C D E F G H J K L M N P R T
132*M82-SM2B 78 32 22 9 16 16 22 - 34 - 20 52.5 6 1/8" NPT 5 12
(3.07) (1.26) (0.87) (0.35) (0.63) (0.63) (0.87) - (1.34) - (0.79) (2.07) (0.24) 1/8" NPT (0.20) (0.47)
Travel T = 2.5 (0.10) to operate, 5.0 (0.20) maximum

www.midland-acs.com
1750.8 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

1800 Fluoslide Semi-Rotary

SLIDE VALVES • 1/4”, NPT (BSP) 1800 SERIES

1800
MANUALLY OPERATED

General Description Technical Data

4 way semi-rotary slide valves Ports
with either lever or switch
operation and 4 way linear Semi-rotary valves
slide valves in all stainless steel • 1/4" NPT (BSP option available)
construction for onshore and

FLUOSLIDE SEMI-ROTARY
offshore applications.
Cv (Kv)
• Heavy duty
• Lever direct coupled • 1/4"- 1.96 (10)
• 2 and 3 positions available
• For gases an liquids
Working pressure (gases)
Operating Medium • 0 to 10 bar (43.5 to145 psi)

Gases
Working temperature Construction Materials
Filtered lubricated or
non-lubricated air, inert • -20ºC to +70ºC (-4ºF to +158ºF) • Stainless Steel AISI 316L
gas, sweet (natural) gases. to NACE MR-01-75 Body
Sour gas option available Flow
(details on application) • Stainless Steel AISI 316L
at 6 bar (87 psi), 1 bar (14.5 psi)
to NACE MR-01-75
Liquids differential
Slide Carrier
Low pressure hydraulic, • 1/4" - 646 L/min (23 SCFM)
mineral oil or water • 316 Stainless Steel Springs
(details on application). • Nitrile Seals
• Graphite filled PTFE Slide
Functional Symbols
4/3 Pressure 4/3 Pressure
4/2
release neutral held neutral

4 2 4 2 4 2

3 1 3 1 3 1

www.midland-acs.com
1800.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

1800 Fluoslide Semi-Rotary

SLIDE VALVES • 1/4”, NPT (BSP) 1800 SERIES
1800

MANUALLY OPERATED (LEVER), MANUALLY OPERATED (SWITCH)

Preferred Models

Model No Description Mass kg (lbs) Symbol

4 2
2422B555SA2B 1/4"NPT 4/2 Lever operated, 2 position positive 1.27 (2.80) 12 14
FLUOSLIDE SEMI-ROTARY

3 1
4 2
2422M525SA2B 1/4"NPT 4/2 Lever operated, spring return 1.27 (2.80) 12 14
3 1
4 2
2432E555SA2B 1/4"NPT 4/3 Lever operated, positive, pressure release neutral 1.27 (2.80) 12 14
3 1
4 2
2432D555SA2B 1/4"NPT 4/3 Lever operated, positive, pressure held neutral 1.27 (2.80) 12 14
3 1
4 2
2432R555SA2B 1/4"NPT 4/3 Lever operated, self centre, pressure release neutral 1.27 (2.80) 12 14

3 1
4 2
2432H555SA2B 1/4"NPT 4/3 Lever operated,self centre, pressure held neutral 1.27 (2.80) 12 14
3 1

For switch operated versions specify code 0 in positions 6 and 7 of model number code for positive and self centre versions and in
position 6 for spring return versions. For Rear flange mounted versions specify code 7 in position 8 of model number code.

INSTALLATION DIMENSIONS mm (inches)

4/2, 4/3 Lever operated 4/2, 4/3 Switch operated
2422B555SA2B 2422B005SA2B
B C
2422M525SA2B S
2422M025SA2B
ØK
2432*555SA2B Jº Jº 2432*005SA2B 1

3 4

A ØE Rear flange mounting

1
1 1 2422B007SA2B
X
2422M027SA2B Y
N H
3 4
R 2 4
2432*007SA2B
1
3

3 4
5 Ports P
T D See note L
M 2 Mounting holes H
tapped F x G deep

NOTE: 2 Mounting holes Ø6.3(0.25) with screws to suit 6 (0.24) thick panel

Model No A B C D E F G H J K L M N P R S T V W X Y
24*2*5*5SA2B 140 59 63.5 20 12.7 M6 8 54 34.75º 32 38.1 19 24 1/4"NPT 15 13 35 40 38 73 9.5
(5.51) (2.32) (2.50) (0.79) (0.50) M6 (0.31) (2.13) 34.75º (1.26) (1.50) (0.75) (0.94) 1/4"NPT (0.59) (0.51) (1.38) (1.57) (1.50) (2.87) (0.37)

www.midland-acs.com
1800.2 IN CONTROL 11/05
Midland-STANDARD-A4 9/11/06 2:05 PM Page 1

1900 Direct Acting Valves

1/4”, 3/8”, 1/2”, 3/2 NPT (BSP) 1900 SERIES

1900
SOLENOID OPERATED
General Description Te c h n i c a l D a t a
A range of direct acting 3/2 P o rt s
universal hazardous area
solenoid valves for the oil, gas • 1/4", 3/8", 1/2”NPT
and petrochemical industries. (BSP option available)
• Lightweight

DIRECT ACTING VALVES

• Manual override, reset and
latch versions Orifice
• EExd IIC T6 • 8.8mm (0.35”)
• 316 Stainless Steel throughout
• ATEX, UL
Cv (Kv)
• Universal operation
• 0.86 (12.25)
Operating Medium

Gases Wo r k i n g p r e s s u r e
Filtered lubricated or (gases and liquids)
non-lubricated air, inert • Maximum body pressure
gas, sweet (natural) gases.
Sour gas option available. 20 bar (290 psi)
(details on application) • Maximum operating pressure
differential 10 bar (145 psi)
Liquids
Low pressure hydraulic,
mineral oil or water. Wo r k i n g t e m p e r a t u r e Housing
Ambient temperature • 316 Stainless Steel
Functional Symbols • -50ºC to +40ºC (-58ºF to +104ºF)
C a b l e E n t ry
3/2 3/2
Normally Closed Diverter C o n s t ru c t i o n M a t e r i a l s • M20 x 1.5
• Stainless Steel AISI 316 S11
to NACE MR-01-75 Body C o i l Vo l t a g e s
3/2 3/2 • 316 Stainless Steel Spindle • DC - 12v, 24v, 110v
Normally Open Changeover
• 316 Stainless Steel Springs • AC - (50/60 Hz) 24v, 110v,
• Nitrile (Buna N) Seals 120v, 220v
options: Fluoroelastomer
and EPDM V o l t a g e To l e r a n c e
• +10% to -15%
Solenoid Specifications
• Flameproof EExd IIC T6 to Power Consumption
ATEX standard • DC - 6 Watts
• AC units fitted with DC rectifier
D e g re e o f P ro t e c t i o n
• IP67 Coil Insulation
• Class H

Duty Cycle
• 100% Continuously Rated

E a rt h C o n n e c t i o n s
• Internal and Extrenal

www.midland-acs.com
1900.1 IN CONTROL 11/05
Midland-STANDARD-A4 9/11/06 2:05 PM Page 2

1900 Direct Acting Valves

1/4”, 3/8”, 1/2”, 3/2 NPT (BSP) 1900 SERIES
1900

SOLENOID OPERATED

MODEL CODES
3/2 Valves

1 325M23 2 SD 3 D 4 5 Voltage Codes

DIRECT ACTING VALVES

C = 12v DC
D = 24v DC
Valve Size Valve Type Port type Solenoid Type G = 110v DC
2 = 1/4” – = Standard 1 = BSP K = EExd IIC T6 J = 24v 50/60Hz AC
3 = 3/8” M = with manual override 2 = NPT M = 110v 50/60Hz AC
4 = 1/2” U = with manual latch N = 120v 50/60Hz AC
X = with manual reset S = 220v 50/60Hz AC

Preferred Models

Model No Description Mass kg (lbs) Symbol

2325M23-SD2DK + 1/4" NPT 3/2 Direct acting solenoid operated, 2.00 (4.41) 2
10 12
spring return 1 3

2325M23MSD2DK +
2
1/4" NPT 3/2 Direct acting solenoid operated, 2.10 (4.63) 10 12
spring return with manual override 1 3

2
2325M23USD2DK + 1/4" NPT 3/2 Direct acting solenoid operated, 2.10 (4.63) 10 12
spring return with manual latch 1 3

2
2325M23XSD2DK + 1/4" NPT 3/2 Direct acting solenoid operated, 2.10 (4.63) 10 12
spring return with manual reset 1 3

2
3325M23-SD2DK + 3/8" NPT 3/2 Direct acting solenoid operated, 2.10 (4.63) 10 12
spring return 1 3

2
3325M23MSD2DK + 3/8" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual override, 1 3

2
3325M23USD2DK + 3/8" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual latch 1 3

2
3325M23XSD2DK + 3/8" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual reset 1 3

2
4325M23-SD2DK + 1/2" NPT 3/2 Direct acting solenoid operated, 2.10 (4.63) 10 12
spring return 1 3

2
4325M23MSD2DK + 1/2" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual override 1 3

2
4325M23USD2DK + 1/2" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual latch 1 3

2
4325M23XSD2DK + 1/2" NPT 3/2 Direct acting solenoid operated, 2.20 (4.85) 10 12
spring return with manual reset 1 3

+ Specify solenoid voltage

www.midland-acs.com
1900.2 IN CONTROL 11/05
Midland-STANDARD-A4 9/11/06 2:05 PM Page 3

1900 Direct Acting Valves

1/4”, 3/8”, 1/2”, 3/2 NPT (BSP) 1900 SERIES

1900
SOLENOID OPERATED
INSTALLATION DIMENSIONS mm (inches)
3/2 Direct Solenoid Operated, Spring Return
2325M23-SD2DK +
3325M23-SD2DK +
4325M23-SD2DK +

DIRECT ACTING VALVES

D E ØB R

S
F

A
Cable entry
G M20 x 1.5
K 2 mounting
L holes ØW
1
M
H 2

2 mounting 3
3 ports P holes V
clearance
J N
C

Coil housing can be rotated 360º to facilitate wiring.

Model No A B C D E F G H J K L M N P R S T V W
2325M23-SD2K+ 150 78 45 58 52 54 52 23 25.4 66 12 20 34 1/4" 46 42 26 M4 8.5
(5.90) (3.07) (1.77) (2.28) (2.05) (2.13) (2.05) (0.91) (1.00) (2.60) (0.47) (0.79) (1.34) 1/4" (1.81) (1.65) (1.02) M4 (0.33)
3325M23-SD2K+ 164 78 65 58 52 54 52 34 32 71 17 24 42 3/8" 46 42 26 M4 8.5
(6.46) (3.07) (2.56) (2.28) (2.05) (2.13) (2.05) (1.34) (1.26) (2.80) (0.67) (0.94) (1.65) 3/8" (1.81) (1.65) (1.02) M4 (0.33)
4325M23-SD2K+ 164 78 65 58 52 54 52 34 32 71 17 24 42 1/2" 46 42 26 M4 8.5
(6.46) (3.07) (2.56) (2.28) (2.05) (2.13) (2.05) (1.34) (1.26) (2.80) (0.67) (0.94) (1.65) 1/2" (1.81) (1.65) (1.02) M4 (0.33)

3/2 Direct Solenoid Operated, 3/2 Direct Solenoid Operated, 3/2 Direct Solenoid Operated,
Spring Return with Spring Return with Spring Return with
Manual Override. Manual Latch. Manual Reset.
2325M23MSD2DK + 2325M23USD2DK + 2325M23XSD2DK +
3325M23MSD2DK + 3325M23USD2DK + 3325M23XSD2DK +
4325M23MSD2DK + 4325M23USD2DK + 4325M23XSD2DK +

X RESET
X X

Model No X Model No X Y Model No X

2325M23MSD2K+ 54 2325M23USD2K+ 30 40 2325M23XSD2K+ 54
(2.13) (1.18) (1.57) (2.13)
3325M23MSD2K+ 54 3325M23USD2K+ 30 40 3325M23XSD2K+ 54
(2.13) (1.18) (1.57) (2.13)
4325M23MSD2K+ 54 4325M23USD2K+ 30 40 4325M23XSD2K+ 54
(2.13) (1.18) (1.57) (2.13)
All other dimensions as above All other dimensions as above All other dimensions as above

www.midland-acs.com
1900.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 1

4500 Ancillary Valves

1/4”, 3/2, 5/2, NPT (BSP) 4500 SERIES
4500

AIR PRESSURE SWITCH

General Descriptions Technical Data

A compact fully adjustable Ports
pneumatically operated 316 • 1/4"NPT (BSP option available)
Stainless Steel pressure switch • 1/8"NPT Pilot port
ACCESSORIES

with operating pressures up to

16 bar (232 psi). Cv (Kv)
• 3/2 valves 0.5 (7.5)
For use on failsafe systems. • 5/2 valves 0.7 (10.5)
• Compact / Lightweight.
• 5 pressure ratings. Working Pressure
• Integrated tagging facility.
• Fluoroelastomer seals. • For main directional valve
• 3/2 and 5/2 versions. 12 bar (174 psi)

Operating Medium Maximum Pilot Pressure Inlet

• 16 bar (232 psi)
Gases
Filtered lubricated or non-lubricated
air, inert gas, sweet (natural) gases. Regulated Pressure (adjustable)
Sour gas option available. • For main directional valve
(details on application) • 1.0 to 2.0 bar (14.5 to 29 psi)
• 1.0 to 4.0 bar (14.5 to 58 psi)
Functional Symbols • 1.0 to 7.0 bar (14.5 to 102 psi)
• 1.0 to 10 bar (14.5 to 145 psi)
3/2 3/2 5/2 Construction Materials
Normally Closed Diverter • 1.0 to 16 bar (14.5 to 232 psi)
• (Note 16 bar regulated pressure • Stainless steel AISI 316L to
must be fed from independant NACE MR-0175 Body
3/2 3/2 supply to main directional valve) • Stainless steel AISI 316L
Normally Open Changeover
to NACE MR-0175 Spool
Working Temperature • 316 Stainless Steel Springs
• -20ºC to +80ºC (-4ºF to +176ºF) • Fluoroelastomer Seals
• Fluoroelastomer Diaphragm
Maximum Flow
• 6 bar (87 psi), 1 bar (14.5 psi)
differential
• 3/2 valves - 480 L/min (17 SCFM)
• 5/2 valves - 680 L/min (24 SCFM)

Pressure Setting Hysteresis

• 0.25 bar (3.63 psi)

Function APPLICATION FOR DOUBLE ACTING ACTUATORS 5/2

1) Airfail open or close For this application when air is applied
APPLICATION FOR SPRING RETURN ACTUATORS 3/2 to ports 1 and 3 (N/C) or 1 and 5 (N/O) and the actuator is
1) Airfail stay put For this application port 3 is plugged. When connected to the outlets 2 and 4 and pilot air is greater than
pilot air is applied to port 1 or 2 in the Normally Closed mode set pressure, air from another 5/2 solenoid or air operated
and pilot air is greater than set pressure, air can flow in either valve will control the double acting actuator. The pressure
direction. When pilot pressure falls below set pressure, the switch can be piped Normally Closed or Normally Open and
integral spool valve closes therefore block port 1 to 2 and the can detect air falling below the set pressure to either open or
output from 2 remains blocked, leaving the actuator or close the actuator, via a volume tank.
downstream signal in the last controlled position. 2) Venting
By not plugging port 3 the valve can be used in the Normally
Open, Closed, Diverter or Changeover mode and the actuator
will vent to atmosphere.

www.midland-acs.com
4500.1 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 2

4500 Ancillary Valves

1/4”, 3/2, 5/2, NPT (BSP) 4500 SERIES

4500
AIR PRESSURE SWITCH

Model Number Ports P Weight kg (lbs) Symbol

2PS3SV022 1/4” NPT 3/2 Adjustable pressure switch 1.60 (3.53)
2 bar (29 psi)
2PS3SV042 1/4” NPT 3/2 Adjustable pressure switch 1.60 (3.53)

ACCESSORIES
4 bar (58 psi)
2PS3SV072 1/4” NPT 3/2 Adjustable pressure switch 1.60 (3.53)
7 bar (102 psi)
2PS3SV102 1/4” NPT 3/2 Adjustable pressure switch 1.60 (3.53)
10 bar (145 psi)
2PS3SV162 1/4” NPT 3/2 Adjustable pressure switch 1.60 (3.53)
16 bar (232 psi)
2PS5SV022 1/4” NPT 5/2 Adjustable pressure switch 2.05 (4.52)
2 bar (29 psi)
2PS5SV042 1/4” NPT 5/2 Adjustable pressure switch 2.05 (4.52)
4 bar (58 psi)
2PS5SV072 1/4” NPT 5/2 Adjustable pressure switch 2.05 (4.52)
7 bar (102 psi)
2PS5SV102 1/4” NPT 5/2 Adjustable pressure switch 2.05 (4.52)
10 bar (145 psi)
2PS5SV162 1/4” NPT 5/2 Adjustable pressure switch 2.05 (4.52)
16 bar (232 psi)

INSTALLATION DIMENSIONS mm (inches) ACCESSORIES

3/2 Pressure Switch 5/2 Pressure Switch Tamper Proof Cap Kit
Tamper proof cap kit
øG øG SSAF238-22
26 (1.02)

13
(0.51)
F F
Tagging holes Tagging holes
Wire Lock Hole
Thread H Thread H Kit comprises
1 - Pressure adjustment screw, 1 - Tamper proof cap
A A
E E
Panel Mounting Kit
Pilot port Pilot port
Panel mounting kit
D D SSAF238-20

B M34 x 1,5
B
Mounting Bracket
Mounting bracket kit: SSAF238-25

1500 Series 1500 Series

3/2 valve 3/2 valve
4)
M sq 90 (3.5
.76)
M sq N 13 70 (2
(0.51) 2 Mounting holes
øC øC ø8.5 (ø0.33)
For basic dimensions of 3/2 and 5/2 valves see pg 1500.7 (Spring Return Bases) (1. 40 ø34.5 (ø1.36)
57
)

Model Number A B C D E F G H M N
Kit comprises
1 - Bracket 1 - Panel nut
2PS3SV**2 127.5(5.02) 54(2.13) 70(2.76) 40(1.57) 36(1.42) 13(0.51) 44(1.73) M34X1.5 32(1.26) –
2PS5SV**2 127.5(5.02) 93(3.66) 70(2.76) 40(1.57) 36(1.42) 13(0.51) 44(1.73) M34X1.5 32(1.26) 45(1.77)

www.midland-acs.com
4500.2 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 3

4500 Ancillary Valves

1/4”, 3/8”, 1/2”, 3/4”, 1”, NPT (BSP) 4500 SERIES

UNI-DIRECTIONAL FLOW REGULATORS • BI-DIRECTIONAL FLOW REGULATORS

4500

General Description Technical Data

Uni-directional Working Pressure
316 Stainless Steel in-line flow • 10 bar (145 psi)
regulators for uni-directional operation Working Temperature
(free flow return).
Bi-directional • -20ºC to +70ºC (-4ºF to +158ºF)
316 Stainless Steel in-line flow Low temperature version
ACCESSORIES

regulators for bi-directional • -50ºC (-58ºF ) (optional)

operation (separate flow control Maximum Flow L/min
in each direction). (SCFM) Cv(Kv)
• 6 bar (87 psi), 1 bar (14.5 psi)
Operating Medium differential
Uni-directional
Gases
Filtered lubricated or non-lubricated • 1/4” 1000(35) -1.0(15.5)
air, inert gas, sweet (natural) gases. • 3/8” 1680(59) -1.7(26)
Sour gas option available. • 1/2” 2520(89) -2.5(39)
(details on application) • 3/4” 5428(192) -5.4(84) Construction Materials
Liquids • 1” 9820(347) -9.8(152) • Stainless Steel AISI 316L
Low pressure hydraulic, mineral oil Bi-directional to NACE MR-01-75 Body
or water. • Stainless Steel AISI 316L
• 1/4” 620(22) -0.6(9.6)
• 3/8” 1290(45) -1.3(20) to NACE MR-01-75 Internals
Functional Symbols
Uni-directional Bi-directional • 1/2” 2000(71) -2.0(31) • 316 Stainless Steel Springs
• Nitrile Seals

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

Uni-Directional Flow Regulators Bi-Directional Flow Regulators

2REGSN122 (1/4”) 6REGSN122 (3/4”) 2BIDSN122 (1/4”)
3REGSN122 (3/8”) 8REGSN122(1”) 3BIDSN122 (3/8”)
4REGSN122 (1/2”) Hexagon 4BIDSN122 (1/2”)
Hexagon L (Adjustment to full flow) socket M a/f Hexagon
socket N a/f (Locknut) socket
N a/f M a/f L (Adjustment to full flow) M a/f
L (Adjustment to full flow) (Locknut) N a/f (Locknut)

2 Mounting 1 Mounting 2 ports

holes øJ holes øJ 2 ports

A A C
1
B E
E
B A
E
C C
B C
H F
G H F
2 ports
G
H F
L
G 2 Mounting
holes øJ

Model Number Ports A B C E F G H J L M N WEIGHT

Uni-Directional
2REGSN122 1/4” NPT 48(1.89) 20(0.79) 9(0.35) 25.4(1.00) 25.4(1.00) 56(2.20) 40(1.57) 6.35(0.25) 6(0.24) 18(0.71) 5(0.20) 0.26(0.57)
3REGSN122 3/8” NPT 70(2.76) 29(1.14) 14.5(0.57) 35(1.38) 35(1.38) 76(2.99) 45(1.77) 6.35(0.25) 12(0.47) 23.3(0.92) 6(0.24) 0.75(1.65)
4REGSN122 1/2” NPT 70(2.76) 29(1.14) 13.5(0.57) 35(1.38) 35(1.38) 76(2.99) 45(1.77) 6.35(0.25) 12(0.47) 23.3(0.92) 6(0.24) 0.75(1.65)
6REGSN122 3/4” NPT 100(3.94) 16(0.63) 25.4(1.00) 50.8(2.00) 50.8(2.00) 95(3.74) 19(0.75) 6.35(0.25) 19(0.75) 30.5(1.20) 10(0.39) 1.75(3.86)
8REGSN122 1” NPT 125(4.92) 19(0.75) 31.75(1.25) 63.5(2.50) 63.5(2.50) 95(3.74) 24(0.94) 6.35(0.25) 19(0.75) 36(1.42) 12(0.47) 2.75(6.06)
Bi-Directional
2BIDSN122 1/4” NPT 85(3.35) 28(1.10) 15.5(0.61) 40(1.57) 25.4(1.00) 44.5(1.75) 32(1.26) 6.35(0.25) 6(0.24) 18(0.71) 5(0.20) 0.43(0.95)
3BIDSN122 3/8” NPT 121(4.76) 35(1.38) 21(0.83) 51(2.00) 35(1.38) 63.5(2.50) 45(1.77) 6.35(0.25) 12(0.47) 23.3(0.92) 6(0.24) 1.40(3.09)
4BIDSN122 1/2” NPT 121(4.76) 35(1.38) 21(0.83) 51(2.00) 35(1.38) 63.5(2.50) 45(1.77) 6.35(0.25) 12(0.47) 23.3(0.92) 6(0.24) 1.40(3.09)

www.midland-acs.com
4500.3 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 4

4500 Ancillary Valves

1/4”, 3/8”, 1/2”, NPT (BSP) 4500 SERIES

4500
NEEDLE VALVES • EXHAUST PORT FLOW REGULATORS

General Description Technical Data

Working Pressure
Needle Valve • 12 bar (145 psi) maximum
316 Stainless Steel Needle Valve
with 3mm or 6mm orifice.

ACCESSORIES
Working Temperature
Exhaust Port Flow Regulators • -20ºC to +70ºC (-4ºF to +158ºF)
316 Stainless Steel exhaust flow
regulator/breather supplied Low temperature version
complete with tamper proof cap. • -50ºC (-58ºF ) (optional)
Maximum Flow L/min (SCFM) - Cv (Kv)
Operating Medium • 6 bar (87 psi), 1 bar (14.5 psi) differential
Gases Needle Valve (3mm orifice)
Filtered non-lubricated air, • 1/4” 290(10.5) -0.30(4.6)
inert, sweet (natural) gases. Needle Valve (6mm orifice)
• 1/4” 640(23) -0.64(10)
Construction Materials
Functional Symbols Exhaust Port Flow Regulators
• Stainless Steel AISI 316L
Exhaust port flow • 1/4” 646(23) -0.65(10)
Needle valve
regulators
to NACE MR-01-75 Body
• 3/8” 1100(39) -1.10(17) • Stainless Steel AISI 316L
• 1/2” 1800(64) -1.80(28) to NACE MR-01-75 Internals
• 316 Stainless Steel Spring
• Nitrile Seals

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

Needle Valve Exhaust Port Flow Regulators

2NDVSN12203 (1/4”-3mm orifice) 2EFRSN102 (1/4”)
2NDVSN12206 (1/4”-6mm orifice) 3EFRSN102 (3/8”)
4EFRSN102 (1/2”)

B a/f A

F 2 ports

All dimensions as for uni-directional flow regulators All units have 0.4mm (0.016”) diameter minimum orifice to
Model 2REGSN122 on page 4500.3 eliminate complete shut off. Units supplied complete with
tamper proof cap.

Model Number Ports A F Weight Model Number Thread A B Weight

2NDVSN12203 1/4” NPT 48 25.4 0.26 2EFRSN102 1/4” NPT 47.5 17 0.05
(1.89) (1.00) (0.57) (1.87) (0.67) (0.11)
2NDVSN12206 1/4” NPT 48 25.4 0.26 3EFRSN102 3/8” NPT 66 23.4 0.15
(1.89) (1.00) (0.57) (2.60) (0.92) (0.33)
4EFRSN102 1/2” NPT 87.5 23.4 0.20
(3.44) (0.92) (0.44)

www.midland-acs.com
4500.4 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 5

4500 Ancillary Valves

NON RETURN VALVES • 1/4”, 3/8”, 1/2”, 3/4”, 1”, NPT (BSP) 4500 SERIES
4500

NON RETURN VALVES

General Descriptions Technical Data
Non Return Valves Working Pressure (gases & liquids)
316 Stainless Steel non return
valves in two ranges - one for • 12 bar (174 psi)
pressures up to 12 bar (174psi) • 25 bar (362 psi)
and one for pressures up to
ACCESSORIES

Minimum Opening Pressure

25 bar (362 psi). • 0.2 bar (2.90 psi)
Working Temperature
Operating Medium
• -20ºC to +70ºC (-4ºF to +158ºF)
Gases Low temperature version
Filtered lubricated or non • -50ºC (-58ºF ) (optional)
lubricated air, inert gas, sweet Maximum Flow L/min (SCFM) - Cv(Kv)
(natural) gases.
Sour gas option available. • 6 bar (87 psi), 1 bar (14.5 psi) differential
(details on application) Non return valves (12 bar) Construction Materials
• 1/4” 1600(57) 1.6(25)
Liquids • Stainless Steel AISI 316L
Low pressure hydraulic, • 3/8” 2200(80) 2.3(35)
to NACE MR-01-75 Body
mineral oil or water. • 1/2” 3800(137) 3.9(60)
• Stainless Steel AISI 316L
• 3/4” 5800(205) 5.8(90)
Functional Symbols • 1” 7700(274) 7.8(120) to NACE MR-01-75 Internals
Non return valves Non return valves (25 bar) • Acetal poppet
• 1/4” 736(26 ) 0.74(11.4) • 316 Stainless Steel Spring
2 1
• 3/8” 1840(65) 1.85(28.5) • Nitrile Seals
• 1/2” 2600(91) 2.60(40)

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

Non Return Valves (12 bar) Non Return Valves (25 bar)
2NRVSN122 (1/4”) 6NRVSN122 (3/4”) 2NRVSN252 (1/4”)
3NRVSN122 (3/8”) 8NRVSN122 (1”) 3NRVSN252( 3/8”)
4NRVSN122 (1/2”) 4NRVSN252 (1/2”)

2 ports B a/f B a/f A

B a/f A

DIRECTION DIRECTION
DIRECTION øC
OF FLOW OF FLOW
OF FLOW

2 ports A 2 ports

Model Number Ports A B C Weight

12 bar
2NRVSN122 1/4” NPT 50(1.97) 22.2(0.87) - 0.12(0.26)
3NRVSN122 3/8” NPT 65(2.56) 30.5(1.20) - 0.30(0.66)
4NRVSN122 1/2” NPT 65(2.56) 30.5(1.20) - 0.30(0.66)
6NRVSN122 3/4” NPT 85(3.35) 45(1.77) 50.8(2.00) 1.00(2.20)
8NRVSN122 1” NPT 85(3.35) 45(1.77) 50.8(2.00) 1.00(2.20)
25 bar
2NRVSN252 1/4” NPT 70(2.76) 23.4(0.87) - 0.19(0.42)
3NRVSN252 3/8” NPT 80(3.15) 33(1.30) - 0.46(1.01)
4NRVSN252 1/2” NPT 90(3.54) 41.3(1.63) - 0.76(1.68)

www.midland-acs.com
4500.5 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 6

4500 Ancillary Valves

1/4”, 3/8”, 1/2”, 3/4”, 1”, NPT (BSP) 4500 SERIES

4500
QUICK EXHAUST VALVES • SHUTTLE VALVES
General Descriptions Technical Data
Quick Exhaust Valves Working Pressure (gases & liquids)
316 Stainless Steel quick • 12 bar (174 psi)
exhaust valves in 5 sizes. Working Temperature
• -20ºC to +70ºC (-4ºF to +158ºF)

ACCESSORIES
Shuttle Valves
Low temperature version
316 Stainless Steel shuttle valves
• -50ºC (-58ºF ) (optional)
for three way “OR” function.
Maximum Flow L/min (SCFM) - Cv(Kv)
Operating Medium • 6 bar (87 psi), 1 bar (14.5 psi) differential
Quick Exhaust Valve (supply to outlet)
Gases • 1/4” 1290(46) 1.3(20)
Filtered lubricated or non • 3/8” 1810(64) 1.8(28)
lubricated air, inert gas, sweet • 1/2” 3810(135) 3.8(59)
(natural) gases.
• 3/4” 4520(160) 4.5(70)
Sour gas option available.
• 1” 7700(274) 7.8(120)
(details on application)
Quick Exhaust Valve (outlet to exhaust) Construction Materials
Liquids • 1/4” 2780(98) 2.8(43) • Stainless Steel AISI 316L
Low pressure hydraulic, • 3/8” 3810(135) 3.8(59)
to NACE MR-01-75 Body
mineral oil or water. • 1/2” 5490(194) 5.5(85)
• 3/4” 6460(228) 6.5(100) • Stainless Steel AISI 316L
Functional Symbols • 1” 11000(388) 11.0(170) to NACE MR-01-75 Internals
Quick exhaust valve Shuttle valve Shuttle Valve • 316 Stainless Steel Spring
• 1/4” 1350(45) 1.36(21) • Nitrile Seals

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

Quick Exhaust Valves Shuttle Valves
2QEVSN122 (1/4”) 6QEVSN122 (3/4”) 2SHVSN122 (1/4”)
3QEVSN122(3/8”) 8QEVSN122 (1”)
4QEVSN122(1/2”)

J J
E Mounting hole øG E Mounting hole øG 3 ports Outlet
3 ports F 3 ports F
Cyl Cyl
B

Exh Inlet Exh Inlet B Inlet Inlet

B
H H

D C sq D C sq
A C sq
A A

Model Number Ports A B C D E F G H J Weight Model Number Ports A B C Weight

2QEVSN122 1/4” NPT 52 38 32 32 - - - 16 22 0.34 2SHVSN122 1/4” NPT 56 43 32 0.40
(2.05) (1.50) (1.26) (1.26) - - - (0.63) (0.87) (0.75) (2.20) (1.69) (1.26) (0.88)
3QEVSN122 3/8” NPT 60 42 35 35 - - - 17.5 23 0.48
(2.36) (1.65) (1.38) (1.38) - - - (0.69) (0.91) (1.06)
4QEVSN122 1/2” NPT 70 55 45 45 10 6.5 8.5 22.5 31 0.80
(2.76) (2.17) (1.77) (1.77) (0.39) (0.26) (0.33) (0.88) (1.22) (1.76)
6QEVSN122 3/4” NPT 102 70 54 54 10 12 8.5 27 35 1.60
(4.02) (2.76) (2.13) (2.13) (0.39) (0.47) (0.33) (1.06) (1.38) (3.53)
8QEVSN122 1” NPT 114 99 74 74 16 12 11 37 52 3.6
(4.49) (3.90) (2.91) (2.91) (0.63) (0.47) (0.43) (1.46) (2.05) (7.94)

www.midland-acs.com
4500.6 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 7

4500 Thermal Fuses / Visual Indicator

1/8”, 1/2”, NPT (BSP) 4500 SERIES
4500

THERMAL FUSES AND VISUAL INDICATOR

General Descriptions Technical Data
Thermal Fuses Working pressure (gases & liquids)
316 Stainless Steel thermal fuses • Thermal Fuses
for fire release. Available for 6 12 bar (174 psi)
temperature settings.
ACCESSORIES

• Visual Indicator
Visual Indicators 1 to 12 bar (14.5 to 174 psi)
Compact 316 Stainless Steel panel
mounted visual indicator with Working temperature
various colour options. • Thermal Fuses
-20ºC to + 70ºC (-4ºF to +158ºF)
Operating Medium -20ºC to + 96ºC (-4ºF to +205ºF)
-20ºC to +102ºC (-4ºF to +216ºF)
Gases -20ºC to +124ºC (-4ºF to +255ºF)
Filtered lubricated or non-lubricated -20ºC to +137ºC (-4ºF to +279ºF)
air, inert gas, sweet (natural) gases. -20ºC to +200ºC (-4ºF to +392ºF)
Construction Materials
Sour gas option available. • Stainless Steel AISI 316L to
(details on application) • Visual Indicator
20ºC to +65ºC (36ºF to +149ºF) NACE MR-0175 Body
• Stainless steel AISI 316L to
Liquids
Low pressure hydraulic, mineral oil Maximum flow NACE MR-0175 Internals
or water. L/min (SCFM) -Cv(Kv) • 316 Stainless Steel Springs
• 6 bar (87 psi), 1 bar • Nitrile Seals
Functional Symbols (14.5 psi) differential • Visual Indicator piston Acetal
Thermal fuse Visual indicator • Thermal Fuses • Visual Indicator assembly
1/2" 5800 (205) - 5.8 (90) Acetal with acrylic lens
1

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

Thermal Fuses Visual indicator
4THFSN102070 (70ºC) 4THFSN102124 (124ºC) 1VISSN122G (1/8"NPT Red/Green)
4THFSN102096 (96ºC) 4THFSN102137 (137ºC) 1VISSN121G (1/8"BSP Red/Green)
4THFSN102102 (102ºC) 4THFSN102200 (200ºC)
A B

Maximum
panel
B a/f A thickness

Angle of
øC øD Visibility
Vº
Port

Across
Flats F Hexagon Nut
H Across Flats Panel
Hole
øC
IMPORTANT:
Fuse opening must be directed towards Alternative colours available in:
deck to safe guard personnel from shot accident by fire release. RED - GREEN - AMBER - BLACK.
Specify colour combination required.

Model Number Ports A B Weight Model Number Ports Weight

4THFSN102070 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33) 1VISSN122G 1/8" NPT 0.1 (0.22)
4THFSN102096 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33) 1VISSN121G 1/8" BSP 0.1 (0.22)
4THFSN102102 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33)
4THFSN102124 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33) A B C D F H T V
4THFSN102137 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33) 46 13.25 24 25.4 19 30.5 6 1600
4THFSN102200 1/2" NPT 51 (2.00) 25.6 (1.01) 0.15 (0.33) (1.81) (0.52) (0.94) (1.00) (0.75) (1.20) (0.24) 1600

www.midland-acs.com
4500.7 IN CONTROL 11/05
Midland-STANDARD-A4 11/15/05 8:49 AM Page 8

4500 N.R.V. Breathers / Breather(Silencers)

1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1” NPT (BSP) 4500 SERIES

4500
N.R.V. BREATHERS AND BREATHER (SILENCERS)
General Descriptions Technical Data
N.R.V. Breathers Working pressure (gases & liquids)
316 Stainless Steel non return • 12 bar (174 psi)
breather to prevent ingress into Working temperature
exhaust and vent ports. • -20ºC to +70ºC (-4ºF to +158ºF)

ACCESSORIES
Maximum flow
Breathers (Silencers) L/min (SCFM) - Cv(Kv)
316 Stainless Steel or Brass sintered • at 6 bar (87 psi),
element silencers used to protect 1 bar (14.5 psi) differential
ports open to the atmosphere.
'Bug Screen' Port Vent 316 Stainless N.R.V. Breathers
Steel sintered element used to • 1/4" 646 (23) - 0.65 (10)
protect vent ports to atmosphere. • 3/8" 1300 (45) - 1.3 (20)
• 1/2" 1550 (54) - 1.6 (24)
Operating Medium Breathers (Silencers)
• 1/4" 1550 (55) - 1.5 (24)
Gases
• 3/8" 1940 (68) - 2.0 (30)
Filtered lubricated or non-lubricated
• 1/2" 3410 (123) - 3.5 (54)
air, inert gas, sweet (natural) gases.
• 3/4" 5500 (194) - 5.5 (85)
Sour gas option available.
(details on application) • 1"5700 (201) - 5.7 (88)

Liquids Construction Materials

Low pressure hydraulic, mineral oil • Stainless steel AISI 316L to NACE MR-0175
or water. • Stainless steel AISI 316L to NACE MR-0175 Internals
• Stainless Steel Spring
Functional Symbols • Nitrile Seals
N.R.V. Breather Breather (Silencer)

MODEL CODES, INSTALLATION DIMENSIONS mm (inches) and WEIGHT kg (lbs)

N.R.V. Breathers Breathers (Silencers)
2NRBSN102(1/4") 1BRESN102 (1/8") 6BRESN102 (3/4")
3NRBSN102(3/8") 2BRESN102 (1/4") 8BRESN102 (1")
4NRBSN102(1/2") 3BRESN102 (3/8")
4BRESN102 (1/2")

B A
B a/f A
(across flats)

øC

Model Number Thread A B C Weight Model Number Thread A B Weight

2NRBSN102 1/4" NPT 34 17 17 0.028 1BRESN102 1/8" NPT 31 14 0.012
(1.34) (0.67) (0.67) (0.062) (1.22) (0.55) (0.026)
3NRBSN102 3/8" NPT 40 23.4 21 0.059 2BRESN102 1/4" NPT 38 17 0.022
(1.50) (0.67) (0.048)
(1.57) (0.92) (0.83) (0.130)
3BRESN102 3/8" NPT 44 22 0.034
4NRBSN102 1/2" NPT 45 23.4 21 0.063 (1.73) (0.87) (0.075)
(1.77) (0.92) (0.83) (0.139) 4BRESN102 1/2" NPT 55 24 0.045
(2.16) (0.94) (0.099)
Bug Screen Thread Weight 6BRESN102 3/4" NPT 70 32 0.10
(2.76) (1.26) (0.22)
1VPBSN122 1/8" NPT 0.01
8BRESN102 1" NPT 75 36 0.15
(0.026) (2.95) (1.42) (0.33)
2VPBSN122 1/4" NPT 0.01
(0.026)

www.midland-acs.com
4500.8 IN CONTROL 11/05