MECHANICAL SEAL

A s tr o n g link of you
r system US3A - UM3A
MECHANICAL
SEAL
US3A US3A
(single spring)

UM3A
4 12 13 3 9 2 1 10

UM3A
(multi-spring)
CAT005 ENG REV 12.09

ELEMENTS:
1 STATIONARY SEAT

2 ROTARY FACE

3 THRUST RING

Heavy duty solutions for low and 4 SEAL BODY

medium pressures operations are
widely used in the chemical 9 ROTARY FACE “O” RING
industry and waterworks.
10 STATIONARY SEAT “O” RING
The US3A and the UM3A are
single component seals. 12 SETSCREW
For both of these, type A has a
pinned stationary seat, 13 SPRING
manufactured in accordance with
UNI EN 12756 (ex DIN 24960). OPERATING CONDITIONS:
Both are suitable for clockwise or
anti-clockwise rotation. DIAMETER:
DIAMETER SPEED:
SPEED PRESSURE
PRESSURE: TEMPERATURE
TEMPERATURE:
(mm) (m/sec) (bar) (°C)
Because of the three drive lugs
on the rotating body, they can 100 20 12 +250
tolerate high levels of vibration,
and mechanical stress.
The “O” ring is easily removed and 20 0 0 –100
refitted when assembling the seal
on shafts with keyways, threads
or sharp edges.
The US3A version is supplied with CHARACTERISTICS:
a single spring and is more suitable SINGLE BI-DIRECTIONAL FLUIGAM
for moderately dirty liquids. (energized
dynamic “O” ring)
The UM3A is a multi-spring version
more suitable for clean liquids. UNI EN 12756 RESISTANT TO ACIDS J UNIVERSAL
UNI & BASES APPLICATION

DIRTY LIQUIDS RESISTANT TO

(SINGLE SPRING) MECHANICAL STRESS
 MECHANICAL SEAL

US3A l1 l7

UM3A l3 l4 US3A
(single spring)

STATIONARY SEAT: 1
SOLID TYPE A

Cr-Mo Steel: Y1

d1
d4

d6
d3

d7
Silicon Carbide: U31

TYPE A WITH INSERT

AISI 316+Tungsten Carbide: K22 Spina d8

SOLID TYPE C (3)
l4 R
UM3A
l5x20° l6 l8 l5x20° l6 5 (multi-spring)
d7
d6

Seal d1 d3 d4 d6 d7 d8 l1 l3 l4 l5 l6 l7 l8 R
Diameter h6 min. H11 H8 ± 0,5 ± 0,5
Graphite Resins impregnated: Z31
20 20 34 36 29 35 3 37,5 27,5 10 2 5 9 4,5 1,5
STATIONARY SEAT “O” RING: 10
22 22 36 38 31 37 3 37,5 27,5 10 2 5 9 4,5 1,5
Nitrile Rubber: G 24 24 38 40 33 39 3 40 30 10 2 5 9 4,5 1,5
Ethylene Propylene: D
Fluoroelastomer: V 25 25 39 41 34 40 3 40 30 10 2 5 9 4,5 1,5
Perfluoroelastomer: G711 28 28 42 44 37 43 3 42,5 32,5 10 2 5 9 4,5 1,5
PTFE: T 30 30 44 46 39 45 3 42,5 32,5 10 2 5 9 4,5 1,5
32 32 46 48 42 48 3 42,5 32,5 10 2 5 9 4,5 1,5
ROTARY FACE: 2
33 33 47 49 42 48 3 42,5 32,5 10 2 5 9 4,5 1,5
SOLID
35 35 49 51 44 50 3 42,5 32,5 10 2 5 9 4,5 1,5
38 38 54 58 49 56 4 45 34 11 2 6 9 5 1,5
40 40 56 60 51 58 4 45 34 11 2 6 9 5 1,5
43 43 59 63 54 61 4 45 34 11 2 6 9 5 2,5
Cr-Mo Steel: Y1
(only US3C-UM3C version) 45 45 61 65 56 63 4 45 34 11 2 6 9 5 2,5
Graphite Resins impregnated: Z31 48 48 64 68 59 66 4 45 34 11 2 6 9 5 2,5
Graphite Antimony impregnated: Z11
Silicon Carbide: U31 50 50 66 70 62 70 4 47,5 34,5 13 2,5 6 9 5 2,5
WITH INSERT 53 53 69 73 65 73 4 47,5 34,5 13 2,5 6 9 5 2,5
55 55 71 75 67 75 4 47,5 34,5 13 2,5 6 9 5 2,5
58 58 78 83 70 78 4 52,5 39,5 13 2,5 6 9 5 2,5
60 60 80 85 72 80 4 52,5 39,5 13 2,5 6 9 5 2,5
AISI 316+Graphite Resins impreg.: Z32 63 63 83 88 75 83 4 52,5 39,5 13 2,5 6 9 5
AISI 316+Silicon Carbide: U32 2,5
AISI 316+Tungsten Carbide: K22 65 65 85 90 77 85 4 52,5 39,5 13 2,5 6 9 5 2,5
ROTARY FACE “O” RING: 9 68 68 88 93 81 90 4 52,5 37,5 15 2,5 7 9 5 2,5
Nitrile Rubber: G 70 70 90 95 83 92 4 60 45 15 2,5 7 9 5 2,5
Ethylene Propylene: D 75 75 99 104 88 97 4 60 45 15 2,5 7 9 5 2,5
Fluoroelastomer: V
Perfluoroelastomer: G711 80 80 104 109 95 105 4 60 44,5 15,5 3 7 9 5 2,5
PTFE with AISI 316 spring: T3 85 85 109 114 100 110 4 60 44,5 15,5 3 7 9 5 2,5
90 90 114 119 105 115 4 65 49,5 15,5 3 7 9 5 2,5
SPRINGS: 13 95 95 119 124 110 120 4 65 49,5 15,5 3 7 9 5 2,5
US3A 100 100 124 129 115 125 4 65 49,5 15,5 3 7 9 5 2,5
020 - 040 coil spring AISI 316: E Dimensions subject to modifications without notice.
043 - 100 wave spring Superstainless: E9
UM3A
AISI 316: E Example:
Hastelloy C: I To order the seals shown on this page for shaft 50 mm, single spring and material shown in the table below:

OTHER METAL PARTS: 4 12 3

2 1 9 10 13 4 12 3
AISI 316: E
Z32 Y1 T3 T E9 E
l1 l1
(4)
The code will be: US3A050 - Z32Y1T3TE9E
NOTES:
1) The material shown on this page is only part of the available range, for other products stock items, please call our Technical
Sales Office.
2) The material should be chosen according to the operating conditions. All queries should be sent to our Technical Sales Office.
3) The last letter of the product code US3A or UM3A shows the type A stationary seat with a slot for an antirotation pin: or if
Back-to-Back solution according to UNI EN a short stationary seat without a slot is required, please request type C. The product code will then be US3C or UM3C. This
d1

12756. For stationary ring type R type is not suitable for seals in PTFE.
dimensions see catalogue UM3AØUM3A 4) When the material of the seal on the stationary seat “O” ring is the same as the seal on the rotary face “O” ring the product
code is not repeated.

FLUITEN ITALIA SpA 20016 PERO (Milano) Italy • Via L. da Vinci, 14

Tel. +39 02.339403.1 Fax +39 02.3538641 E-mail: [email protected] • www.fluiten.it