Scribd
Upload
117 views

The Online Materials Database Sandvik 254 SMO Seamless Tube and Pipe

Uploaded by

SukhDeol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views

The Online Materials Database Sandvik 254 SMO Seamless Tube and Pipe

Uploaded by

SukhDeol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MatWeb - Online Material Data Sheet Page 1 of 2

MatWeb, The Online Materials Database

Sandvik 254 SMO Seamless tube and pipe

Subcategory: Ferrous Metal; Metal; Stainless Steel; Austenitic

Close Analogs: UNS S31254; EN 1.4547

Component Wt. % Component Wt. % Component Wt. %

C Max 0.02 Mo 6.1 P Max 0.03


Cr 20 N 0.2 S Max 0.01
Cu 0.7 Ni 18 Si Max 0.8
Mn Max 1

Material Notes:
Sandvik 254 SMO™ is an austenitic stainless steel of the ELC type developed for use in seawater and
other aggressive chloride-bearing media. The steel is characterised by the following properties:
l excellent resistance to pitting and crevice corrosion
l high resistance to general corrosion
l high resistance to stress corrosion cracking
l higher strength than conventional austenitic stainless steels
l good weldability

Information provided by Sandvik

Physical Properties Metric English Comments

Density 8 g/cc 0.289 lb/in³

Mechanical Properties

Hardness, Rockwell B 96 96 20°C


Tensile Strength, Ultimate 675 - 850 MPa 97900 - 123000 psi 20°C, d=5 mm
Tensile Strength, Ultimate 655 - 850 MPa 95000 - 123000 psi 20°C, d>5 mm
Tensile Strength, Yield Min 310 MPa Min 45000 psi 0.2% offset, 20°
C
Tensile Strength, Yield Min 340 MPa Min 49300 psi 1% offset, 20°C
Tensile Strength, Yield at Elevated Temperature Min 270 MPa Min 39200 psi 1% offset, 300°
C
Tensile Strength, Yield at Elevated Temperature Min 170 MPa Min 24700 psi 0.2% offset,
300°C
Elongation at Break Min 35 % Min 35 % 20°C
Elongation at Break Min 35 % Min 35 % 2", 20°C
Modulus of Elasticity 158 GPa 22900 ksi 500°C
Modulus of Elasticity 174 GPa 25200 ksi 300°C
Modulus of Elasticity 195 GPa 28300 ksi 20°C

Thermal Properties

CTE, linear 100°C 16 µm/m-°C 8.89 µin/in-°F 30-100°C


CTE, linear 250°C 16 µm/m-°C 8.89 µin/in-°F 30-200°C

http://www.matweb.com/search/SpecificMaterialPrint.asp?bassnum=NSANDV225 14.03.2007
MatWeb - Online Material Data Sheet Page 2 of 2

CTE, linear 500°C 17 µm/m-°C 9.44 µin/in-°F 30-500°C


CTE, linear 1000°C 17.5 µm/m-°C 9.72 µin/in-°F 30-700°C
Specific Heat Capacity 0.485 J/g-°C 0.116 BTU/lb-°F 20°C
Specific Heat Capacity 0.535 J/g-°C 0.128 BTU/lb-°F 200°C
Specific Heat Capacity 0.585 J/g-°C 0.14 BTU/lb-°F 400°C
Specific Heat Capacity 0.615 J/g-°C 0.147 BTU/lb-°F 600°C
Thermal Conductivity 10 W/m-K 69.4 BTU-in/hr-ft²-°F 20°C
Thermal Conductivity 14 W/m-K 97.2 BTU-in/hr-ft²-°F 200°C
Thermal Conductivity 18 W/m-K 125 BTU-in/hr-ft²-°F 400°C
Thermal Conductivity 21 W/m-K 146 BTU-in/hr-ft²-°F 600°C

Copyright 1996-2007 by Automation Creations, Inc. The information provided by MatWeb is intended for personal, non-commercial
use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively
without permission from Automation Creations, Inc. No warranty, neither expressed nor implied, is given regarding the accuracy of this
information. The user assumes all risk and liability in connection with the use of information from MatWeb.

http://www.matweb.com/search/SpecificMaterialPrint.asp?bassnum=NSANDV225 14.03.2007

You might also like