Scribd
Upload
667 views

Wheel Loader L50E: 2 Engine

The document provides specifications for the Wheel Loader L50E including its engine, electrical system, hydrostatic transmission, brakes, steering system, air conditioning, working hydraulic system, operating times, tightening torques, and service capacities. The engine is a D4D LAE 2 model with an idling speed of 850±50 rpm. The electrical system operates at 24V with an 80A alternator. The hydrostatic transmission pump operates at 2200±100 rpm with a pressure cut-off of 6163±145 psi.

Uploaded by

Injeletro Diesel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
667 views

Wheel Loader L50E: 2 Engine

The document provides specifications for the Wheel Loader L50E including its engine, electrical system, hydrostatic transmission, brakes, steering system, air conditioning, working hydraulic system, operating times, tightening torques, and service capacities. The engine is a D4D LAE 2 model with an idling speed of 850±50 rpm. The electrical system operates at 24V with an 80A alternator. The hydrostatic transmission pump operates at 2200±100 rpm with a pressure cut-off of 6163±145 psi.

Uploaded by

Injeletro Diesel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Wheel Loader L50E

2 Engine
Model ............................................................... D4D LAE 2
Idling speed, r/s (rpm)
– low .............................................................. 14.2 ±0.8 (850 ±50)
– high ............................................................. 39.9 ±0.8 (2395 ±50)
Valve clearance, in/exh., mm (in) .................... 0.30 (0.012) / 0.50 (0.020)
Injectors, opening pressure, MPa (psi)
– basic ............................................................ 22 (3191)
Lubricating oil pressure, kPa (psi)
– high idling .................................................... 400 ±40 (58 ±5.8)
– low idling ..................................................... 80 (11.6)

3 Electrical system
Type / system voltage...................................... Alternating current / 24 V
Alternator, output / current intensity................. 1920 W / 80 A
Battery electrolyte density when fully
charged............................................................ 1.275–1.285
Battery capacity ............................................... 2 x 105 Ah
Fan pressure, MPa (psi) .................................. 18.0 ±0.8 (2611 ±116)
Basic fan revs, rpm .......................................... 400 ±100

4 Hydrostatic transmission
Pump
Pump feed pressure, MPa (psi) ....................... 2.6 ±0.2 (377 ±29)
at 2200 ±100 rpm
Pressure cut-off, MPa (psi) .............................. 42.6 ±1 (6163 ±145)
at 2200 ±100 rpm
Stall diagram, MPa, (psi) ................................. 10.0 ±2.2 (1450 ±319) at 900 rpm
Stall diagram, MPa (psi) .................................. 40.0 ±3.5 (5800 ±508) at 1800 rpm

Motor
Change-over pressure dynamic, MPa (psi) ..... 26.5 ±1.0 (3843 ±145)
Change-over pressure static, MPa (psi) .......... 26.5 ±1.0 (3843 ±145)

WLO 2005.06 1(4)


L50E

Gearbox
Model ...............................................................HST - 75
Clutch pressure low and high gear,
– Low idling speed MPa (psi) .........................2.1 ±0.2 (305 ±29)
– High idling speed MPa (psi).........................2.2 ±0.2 (319±29)
Lubrication oil pressure, MPa (psi)...................0.03–0.05 (4.4–7.3)

Drive axles
Model/Product No.,
front ..................................................................AWB 10 (23819)
front, with differential lock ................................AWB 10 (23836)
rear...................................................................AWB 10 (23820)
front, with limited slip diff. .................................AWB 10 (23870)
rear, with limited slip diff...................................AWB 10 (23868)

5 Brakes
Type .................................................................Dual circuit, fully hydraulic
wet-disc brakes and pressure
accumulators
Accumulator, type ............................................Diaphragm accumulator
Precharging pressure, minimum, MPa (psi).....3.5 (508)
Precharging pressure, new, MPa (psi).............5.0 (725)
Cut-in pressure, MPa (psi) ...............................12 ±0.3 (1740 ±44)
Max. output brake system pressure,
MPa (psi)..........................................................15 ±0.5 (2175 ±73)
Brake pressure, out, MPa (psi) ........................8.0 ±0.6 (1160 ±87)
Low pressure indication at, MPa (psi) ..............9.0 ±0.5 (1305 ±73)
Brake disc wear minimum disc thickness,
mm (in) .............................................................7.2 (0.283)
New disc, mm (in) ............................................8.5 ±0.08 (0.335 ±0.003)

2(4) WLO 2005.06


L50E

6 Steering system
Stand-by pressure, MPa (psi) .......................... 3.2 ±0.8 (464 ±116)
Max. steering pressure, MPa (psi)................... 21.0 ±0.5 (3046 ±73)
Shock pressure, MPa (psi) .............................. 28.0 ±0.5 (4061 ±73)

Air condition
Filling amount of refrigerant R134a, kg (lb) ..... 1.9 ±0.1 (4.2 ±0.2)

9 Working hydraulic system


Servo system, system pressure, MPa (psi) ..... 3.3–3.8 (477–551)
Main system, flow at 36.7 r/s 2200 r/s
and at a pressure of
10.0 MPa (100 bar) (1450 psi),
litres (US gal) ................................................... 117 (30.8)
Max. pressure 4th function, MPa (psi) ............. 16.5 ±1.0 (2392 ±145)
Max. if pressure is raised by another
hydraulic function............................................. 21.0 ±0.8 (3046 ±116)
Flow 4th function per minute, litres (US gal).... 40 (8.8)
Working pressure at low idling speed,
MPa (psi) ......................................................... 26 ±0.5 (3770 ±73)
Stand-by pressure, MPa (psi) .......................... 2.8 ±0.3 (406 ±44)
Shock valve, tilting rearward, MPa (psi) .......... 30 ±0.5 (4350 ±73)
Shock valve, tilting forward, MPa (psi) ............ 24 ±0.5 (3481 ±73)
Shock valve, lifting, MPa (psi).......................... 32 ±1 (4640 ±145)
Back-up valve, return pressure, MPa (psi) ...... 4.0–6.0 (580–870)
Max. pressure, 3rd function, MPa (psi)............ 21 ±0.8 (3046 ±116)
Max. pressure, 4th function, MPa (psi) ............ 21 ±0.8 (3046 ±116)
Max. pressure, 5th – 6th function, MPa (psi) ... 21 ±1.0 (3046 ±145)

Operating times, seconds


Lifting with SAE working load .......................... 5.4
Lowering without load ...................................... 3.0
Forward tilting with SAE working load ............. 1.1

WLO 2005.06 3(4)


L50E

Tightening torques
Cylinder head
First tightening, gradually until, Nm (lbf ft) ....... 30 (22)
Second tightening, Nm (lbf ft) .......................... 80 (59)
Final tightening, angular tightening.................. 90°
Injectors, nut for attaching screws, Nm (lbf ft) . 16 (12)
Wheel nuts, front/rear, Nm (lbf ft) .................... 600 (443)

Service capacities, litres (US gal)


Engine incl. filter (when changing)................... 12.0 (3.2)
Front axle (total)............................................... 24.0 (6.3)
Front axle (when changing) ............................. 22.0 (5.8)
Rear axle (total) ............................................... 24.0 (6.3)
Rear axle (when changing).............................. 22.0 (5.8)
Hydraulic oil tank (total) ................................... 104.0 (27.5)
Hydraulic oil tank (when changing) .................. 65.0 (17.0)
Fuel tank (total)................................................ 201.0 (53.1)
Fuel tank (useable) .......................................... 197.0 (52.0)
Cooling system (total) ...................................... 27.0 (7.1)
Cooling system (when changing)..................... 19.0 (5.0)
Oil-bath type air cleaner................................... 1.7 (0.4)

4(4) WLO 2005.06

You might also like