Scribd
Upload
56 views1 page

357+388 Box Widening - 3

This document provides design calculations for a box culvert including design data, dimension details, material properties, and design parameters. Key details include dimensions of 3 meters width and 1.5 meters height for a single cell box culvert. Design considers a maximum fill height of 0 meters, concrete grade of M35, and rebar grade of Fe500. Base pressure was calculated to be 7.6 t/m2 which is less than the permissible 10 t/m2.

Uploaded by

Vivek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

357+388 Box Widening - 3

This document provides design calculations for a box culvert including design data, dimension details, material properties, and design parameters. Key details include dimensions of 3 meters width and 1.5 meters height for a single cell box culvert. Design considers a maximum fill height of 0 meters, concrete grade of M35, and rebar grade of Fe500. Base pressure was calculated to be 7.6 t/m2 which is less than the permissible 10 t/m2.

Uploaded by

Vivek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN CALCULATIONS OF BOX CULVERT

1.1 DESIGN DATA


GENERAL INFORMATION
This design is for the following Structure

Type Existing Chainage (CA) Design Chainage (CA) Proposed Chainage (P&P)

Box Culvert 357+388 357+388 357+388

RCC Box Box Culvert


Wearing Coat/Pavement = 0.420m PQC+DLC

Earth Cushion 0.000 m

0.350 m
Typical Haunch of
0.150 x 0.150 1.50 m
0.300 m 0.300 m 1.865 m

3.00 m

0.000 m 0.000 m

0.380 m

1.65 1.65

3.300 m

Base pressure = 7.6 t/m2 < 10.0 t/m2 Hence, OK

1.2 DIMENSION DETAILS


No of cells = 1 No.s
Skew Angle = 0 deg.
Effective Span C/C = 1x 3.300 m
Effective Span C/C (Skew) = 1x 3.300 m
Clear Span = 1x 3.00 m
Clear Span (Skew) = 1x 3.00 m
Clear Height (Max) = 1.500 m
Width of Box = 14.00 m
Width of Box (Skew) = 14.00 m
Wearing coat thickness (Overlaying taken into consideration) = 0.420 m PQC
Max Ht of fill (except W.C / P.C.C / pavement layers) over the top slab = 0.000 m
Min Ht of fill (except W.C / P.C.C / pavement layers) over the top slab = 0.000 m
Thickness of Top slab = 0.350 m
Thickness of Bottom slab = 0.380 m
Thickness of External Vertical Wall square = 0.300
Thickness of External Vertical Wall skew = 0.300 m
Size of Haunch = 0.150 m
x 0.150 m
Width of Parapet Wall/ Crash Barrier = 0.500 m
Width of Safety kerb = 0.00 m
Distance of edge of parapet wall/Crash Barrier from edge of box = 0.50 m
Height of surcharge = 1.20 m
Safe Bearing Capacity of the soil = 10.0 t/m2
Permissible Settlement = 25 mm = 0.025 m

1.3 MATERIAL PROPERTIES


Density of concrete = 25 KN/m3
Density of soil (Dry) = 20 KN/m3
Density of soil (submerged condition) = 10 KN/m3
Density of wearing coat PQC+DLC = 25.0 KN/m3
Angle of internal friction (in degree) = 30 deg
Coefficient of earth pressure at rest = 0.500
Coefficient of earth pressure at rest submerged = 0.500

1.4 DESIGN PARAMETERS


Grade of Concrete = M 35
Grade of Reinforcement = Fe 500
Clear Cover for earth face structural component = 0.075 m
Clear Cover for inside face/ top slab structural component = 0.050 m
Clear Cover for bottom slab = 0.075 m
Exposure Condition = Moderate

You might also like