Scribd
Upload
445 views2 pages

Installation Form - Submersible Pump of SAER

This document contains details on the installation of a submersible pump, including specifications of the pump, motor, cable, control panel, and installation site. It lists the manufacturer and model of the pump and motor, as well as cable type and length. Installation details note the duty point, operating hours, water levels, pipe dimensions, and electrical specifications. A diagram labels the components of the pumping system.

Uploaded by

Hary Fadly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
445 views2 pages

Installation Form - Submersible Pump of SAER

This document contains details on the installation of a submersible pump, including specifications of the pump, motor, cable, control panel, and installation site. It lists the manufacturer and model of the pump and motor, as well as cable type and length. Installation details note the duty point, operating hours, water levels, pipe dimensions, and electrical specifications. A diagram labels the components of the pumping system.

Uploaded by

Hary Fadly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Submersible pump Installation Form

COMPILER DATA
Name: Company: Role:

PUMP MOTOR
Manufacturer: Manufacturer:
Model: Model:
Sr. Number: Sr. Number:

CABLE
Type:
Length: Section:

CONTROL PANEL
Manufacturer:
Type:
Type of starting:
Installed protections:
Motor overload:
- Type: Current setting value to protect
- Size: the motor (A):
Circuit breaker: Type: Size:
Magnetic starter/Contactor: YES NO Some data:
Fuses: YES NO Some data:
Surge Arrestor: YES NO Some data:
Relay Min./Max. Voltage: YES NO Some data:
Relay to check voltage
asymmetry, sequence and YES NO Some data:
lack of phases:

Inverter features(if present):


Brand: Model:
Minimum frequency setting:
Time of starting and stop:
Switch frequency:
Type of filters installed:

Saer Elettropompe S.p.A. R.E.A. n°158853–Reg.Impr./ Cod.Fisc. e Part. IVA 01073840355


Sede Legale e Amm.va: via Circonvallazione,22 Pos. Comm. Estero n° RE 007703 – Cap.Soc. € 2.550.000 i.v.
42016 Guastalla (RE) – Italy e-mail: [email protected]
tel. 0522.830941 – Fax 0522.826948 http://www.saerelettropompe.com

M222-Submersible pump Installation Form_Rev.00_16/06/2016 1/2


Submersible pump Installation Form
INSTALLATION
Duty point: Flow: Head:
Operation time: Hours
Incoming voltage: V
Motor insulation resistance Mohm
Running Amps: A
Max. temperature of the pumped liquid: °C
Well/casing diameter mm
Pipe diameter mm
Pipe material
Nr. of Sticks of pipe
Static water level m

Dynamic water level m


1 m type
Spring assist check valves
2 m type
(number, meters and types)
3 m type
Pump inlet setting m
Flow sleeve diameter
mm
(if present)
1 from m to m
Case ends
2 from m to m
Well depth m

1 Electric submersible pump 2 Cable holder clamps


3 Level probes 4 Check valve
5 Pipe 6 Cable
7 Control box 8 Priming air valve
9 Manometer 10 Gate valve
A Static level B Dynamic level

Notes:

Saer Elettropompe S.p.A. R.E.A. n°158853–Reg.Impr./ Cod.Fisc. e Part. IVA 01073840355


Sede Legale e Amm.va: via Circonvallazione,22 Pos. Comm. Estero n° RE 007703 – Cap.Soc. € 2.550.000 i.v.
42016 Guastalla (RE) – Italy e-mail: [email protected]
tel. 0522.830941 – Fax 0522.826948 http://www.saerelettropompe.com

M222-Submersible pump Installation Form_Rev.00_16/06/2016 2/2

You might also like