Scribd
Upload
110 views2 pages

Leading The Industry In: Solar Microinverter Technology

The document summarizes the specifications of the APsystems QS1 Microinverter, which is a cutting edge microinverter design that can accommodate up to four high-capacity PV modules. It has independent MPPT, Zigbee wireless communication, a wide MPPT voltage range, and meets NEC 690.12 rapid shutdown requirements.

Uploaded by

sukiraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views2 pages

Leading The Industry In: Solar Microinverter Technology

The document summarizes the specifications of the APsystems QS1 Microinverter, which is a cutting edge microinverter design that can accommodate up to four high-capacity PV modules. It has independent MPPT, Zigbee wireless communication, a wide MPPT voltage range, and meets NEC 690.12 rapid shutdown requirements.

Uploaded by

sukiraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Leading the Industry in

Solar Microinverter Technology

•
QS1
Quad module microinverter with independent MPPT

• Maximum continuous output power up to 1,200W

• Wide MPPT voltage range (22V-48V)

• Accommodates modules up to 440W

• Meets NEC 2014/2017 690.12 Rapid Shutdown requirements

• Zigbee communication and online monitoring

APsystems breaks new ground once again with the QS1, a cutting edge microinverter design accommodating up
to four high-capacity PV modules up to 450W+ with independent MPPT. A single-phase, smart grid-compliant
microinverter, the QS1 features Zigbee wireless communication over a mesh network with faster data speeds than
PLC, and a wide MPPT voltage range results in a greater energy harvest for homeowners.

A true utility-interactive microinverter with Reactive Power Control (RPC) technology, the QS1 is inherently NEC
690.12 2014/2017 Rapid Shutdown compliant. The unit also builds on the successful APsystems line of multi-
module microinverters, simplifying installation and reducing costs.

DIMENSIONS:
APsystems QS1 Microinverter Datasheet
INPUT DATA (DC) PER CHANNEL
Module Compatibility 60 + 72 Cell PV Modules
MPPT Voltage Range 22V-48V
Operation Voltage Range 16V-55V
Maximum Input Voltage 60V
Startup Voltage 20V
Maximum Input Current 12A
Maximum DC short circuit current 15A
Recommended PV Module Input Power 440W

OUTPUT DATA (AC) 240V 208V


Maximum Continuous Output Power 1,200W 1,100W
Nominal Output Voltage/Range 240V/211V-264V 208V/183V-229V
Nominal Output Current 5.00A 5.29A
Nominal Output Frequency/Range 60Hz/59.3Hz-60.5Hz
Power Factor >0.99
Total Harmonic Distortion <3%
Maximum units per branch 3 (12 PV modules) 3 (12 PV modules)

EFFICIENCY
Peak Efficiency 96.5%
Nominal MPPT Efficiency 99.5%
Night Power Consumption 30mW

MECHANICAL DATA
Operating Ambient Temperature Range -40°F to +149°F(-40°C to +65°C)
Storage Temperature Range -40°F to +185°F(-40°C to +85°C)
Dimensions (W x H x D) 11.1” x 9.1” x 1.6”(281mm x 231mm x 41.3mm)
Weight 9.9lbs (4.5kg)
AC Trunk Cable Maximum Current 20A
Enclosure Rating NEMA 6
Cooling Natural Convection - No Fans

FEATURES
Communication Wireless (Zigbee)
Transformer Design High Frequency Transformers, Galvanically Isolated
Monitoring Via EMA* Online Portal
Warranty 10 years standard, extendable to 25 years

CERTIFICATE & COMPLIANCE


Safety and EMC Compliance FCC Part15; ANSIC63.4; ICES-003
Certificate & Compliance UL1741**, CSAC22.2No.107.1-01
UL 1741 SA/Rule 21 compliant (240V version only)
Grid Connection Compliance IEEE1547
Rapid Shutdown Meets NEC 2014/2017 690.12
** Meets the standard requirements for Distributed Energy Resources
(UL 1741) and identified with the CSA Listed Mark. 2.17.20 © All Rights Reserved
Specifications subject to change without notice – please ensure you are
using the most recent update found at www.APsystems.com

600 Ericksen Ave NE, Suite 200, Seattle, WA 98110 | 844.666.7035 | APsystems.com

You might also like