BASIC RATES FOR ROAD WORK – PONDICHERRY REGION

A. Labour

SL.NO CODE NO. DESCRIPTION UNIT RATE Rs.

1 0028 Bhisthi Per day 90.00

2 0003 Blacksmith Class-I Per day 130.00
3 0004 Blacksmith Class-II Per day 115.00
4 0002 Mazdoor Per day 90.00
5 0007 Mason Class-I Per day 150.00
6 0008 Mason Class-II Per day 130.00
7 0001 Mate Per day 100.00
8 0013 Mason (Ave.) Per day 140.00
9 0016 Blaster Per day 120.00
10 0018 Breaker Per day 120.00
11 0017 Chiseler Per day 140.00
12 0019 Dresser Per day 120.00
13 0015 Driller Per day 120.00
14 0033 Ploughing Mazdoor Per day 120.00
15 0020 Skilled dresser Per day 120.00
16 0021 Skilled Mazdoor Per day 120.00
17 0023 Sprayer Per day 120.00
18 0026 Spreader Per day 120.00
19 0025 Tarring Mate Per day 120.00
20 0061 Operator (pile) Per day 180.00
21 0062 Mechanic (pile) Per day 160.00
22 0032 Animal cart attendant Per day 120.00
 BASIC RATES FOR ROAD WORK – PONDICHERRY REGION

B. Material

SL.NO CODE NO. DESCRIPTION UNIT RATE Rs.

1 0138A Below 2.36mm Cum 400.00

2 0138 2.8mm Cum 400.00
3 0133B Below 5mm Cum 400.00
4 0133A Below 5.6mm Cum 400.00
5 0133C Below 4.75mm Cum 400.00
6 0505 4.75mm – 2.36mm Cum 400.00
7 0133E 4.75mm – 75 micron Cum 400.00
8 0504A 2.36mm – 75 micron Cum 400.00
9 0504B 10mm – 5mm Cum 400.00
10 0501 10mm – 4.75mm Cum 400.00
11 0504 9.5mm – 2.36mm Cum 400.00
12 0504D 9.5mm – 4.75mm Cum 400.00
13 0504C 11.2mm – 2.36mm Cum 400.00
14 0133 5.6mm Cum 400.00
15 0119 6.75mm Cum 400.00
16 0136B 13.2mm – 5.6mm Cum 453.00
17 0136C 13.2mm – 0.09mm Cum 453.00
18 0111 11.2mm Cum 560.00
19 0136A 13.2mm – 10mm Cum 560.00
20 0112 13.2mm Cum 560.00
21 0108 10mm (ISS) Cum 560.00

22 0113B 19mm Cum 600.00

23 0140A 20mm – 10mm Cum 587.00
24 0516 25mm – 10mm Cum 587.00
25 0507 26.5mm – 4.75mm Cum 587.00
26 0503 26.5mm – 9.5mm Cum 587.00
27 0136D 22.4mm – 2.36mm Cum 587.00
28 0513 22.5mm – 5.6mm Cum 587.00
29 0114C 26.5mm – 2.8mm Cum 587.00
30 0509 37.5mm – 9.5mm Cum 581.00
31 0515 37.5mm – 25mm Cum 581.00
32 0510 45mm – 22.5mm Cum 581.00
33 0118B 45mm – 2.8mm Cum 581.00
34 0500A 53mm – 9.5mm Cum 558.00
35 0500C 53mm – 2.8mm Cum 558.00
36 0115D 63mm – 2.8mm Cum 548.00
37 0139 53mm – 26.5mm Cum 480.00
38 0129 WBM Gr-I 90mm – 45mm Cum 440.00
39 0130 WBM Gr-II 63mm – 45mm Cum 480.00
40 0131 WBM Gr-III 53mm – 22.4mm Cum 546.00
41 0101A Filler (quarry dust) Tonne 267.00
42 0512 RCC pipe 200mm dia with collar RMt 350.00
43 0502 Cost of water Kl 50.00
44 0106 Bitumen 80/100 Tonne 12857.00
45 0106B Bitumen 60/70 Tonne 14377.00
46 0106D Bitumen emulsion Tonne 14327.00
 BASIC RATES FOR ROAD WORK – PONDICHERRY REGION

C. Hire Charges of Plants:

SL.NO CODE NO. DESCRIPTION UNIT RATE Rs.

1 0306 H/C for Tipper 5 Cum capacity Per hour 200.00

2 0603 H/C for Truck 10 tonne capacity Per hour 180.00
3 0309 H/C for Tractor 40 – 50 hp Per hour 234.00
4 0300 H/C for power road roller 8-10 tonnes Per hour 297.00
5 0300A H/C for smooth 3 wheeled steel roller Per hour 297.00
6 0366 H/C for Pneumatic roller Per hour 802.00
7 0300B H/C for Tandem roller Per hour 738.00
8 0363 H/C for vibrator roller Per hour 994.00
9 0366A H/C for sensor paver finisher Per hour 1725.00
10 0317 H/C for Bulldozer (above 80 hp) Per hour 2400.00
11 0322 H/C for front end loader 1cum capacity Per hour 520.00
12 0330 H/C for Mechanical paver finisher Per hour 629.00
13 0305 H/C for heat master oil fed 1500 ltr. Per hour 128.00
14 0316 H/C for motor grader 75 - 120 hp Per hour 1545.00
15 0335 H/C for concrete mixture 10-7 cft Per hour 150.00
16 0337 H/C for pin vibrator (needle) Per hour 40.00
17 0359 H/C for steel cribs 6’x2’x2’ Per hour 50.00
18 0364 H/C for base mix plant Per hour 777.00
19 0365 H/C for hot mix plant Per hour 7150.00
20 0362 H/C for water tanker Per hour 93.75
21 0306C H/C for Disc with harrow Per hour 18.00
22 0306B H/C for Blade Per hour 11.00
23 0606 H/C for Wet mix plant 75 tonnes Per hour 777.00
24 0607 H/C for Electric generating set 125 KVA Per hour 450.00
25 0608 H/C for Rotavator Per hour 11.00
26 0610 H/C for Hydraulic Chips Spreader Per hour 1700.00
27 0611 H/C for Bitumen Pressure Distributor Per hour 692.00
28 0609 H/C for Excavator Per hour 840.00
29 0612 H/C for Plate Compactor Per hour 60.00
30 0601 H/C for Air Compressor 250 cfm Per hour 206.00
31 0609A H/C for Mechanical Broom Hydraulic Per hour 230.00
32 0306A H/C for Ripper Per hour 18.00
ROAD WORK
 2 . Site Clearance and Dismantling
Code Description Unit Rate

2.4C Scarifying including picking up scarified sqm 12.92

material and stacking of old serviceable
material within a lead of 100 metres - stone
metal crush 50mm to 100mm thick by road
roller with scarifier alongwith 20mm premix
carpet/surface dressing. As per clause no 501
of MOST specification.

2.4E Scarifying including picking up scarified sqm 7.54

material and stacking of old serviceable
material within a lead of 100 metres
kankar/gravel metal crust upto 150mm thick with
power roller with scarifier. As per clause no 501
of MOST specification.

2.4F.2 Scarifying including picking up scarified sqm 12.83

material and stacking of old serviceable
material within a lead of 100 metres bituminous
coarse 50 to 75mm along with premix carpet
and surface dressing but without disturbing the
base - with road roller attached with scarifier. As
per clause no 501 of MOST specification.
 3 . Earth Work
Code Description Unit Rate

3.1.5A Earthwork in excavation and filling in cum 321.22

embankment - earthwork excavation by manual
means - where the lead of earthwork is upto 495
metres (when earth is taken from embankment
cutting of from barrow pits) - earthwork in
excavation exclusive of compensation of earth
in chiseling/wedging out rock where blasting is
prohibited in soft rock. As per clause no 302 of
MOST specification.

3.1.5B Earth work in excavation and filling in cum 507.92

embankment - earth work excavation by manual
means - where the lead of earth work is upto
495 metres [when earth is taken from
embankment cutting or from barrow pits] - earth
work in excavation exclusive of compensation of
earth in chiselling/wedging out rock where
blasting is prohibited - hard rock. As per clause
no 302 of MOST specification.

3.2.2A Earth work excavation in soil unsuitable for road cum 23.48
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when over all
lead is more than 60 metres by animal driven
cart capacity 0.5 cum. as per clause no 302 of
MOST specification.

3.2.3A Earth work excavation in soil unsuitable for road cum 76.44
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by manual means and carriage
by tipper 5 tonnes capacity. - lead above 495
metres but upto 1 km. As per clause no 302 of
MOST specification.

3.2.3B Earth work excavation in soil unsuitable for road cum 81.04
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by manual means and carriage
by tipper 5 tonnes capacity lead for 2 km. As per
clause no 302 of MOST specification.
3.2.3C Earth work excavation in soil unsuitable for road cum 84.73
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by manual means and carriage
by tipper 5 tonnes capacity lead for 3 km. As
per clause no 302 of MOST specification.

3.2.3D Earth work excavation in soil unsuitable for road cum/km 3.45
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by manual means and carriage
by tipper 5 tonnes capacity lead for 4 km. to 10
km. As per clause no 302 of MOST

3.2.3E Earth work excavation in soil unsuitable for road cum/km 3.22
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by manual means and carriage
by tipper 5 tonnes capacity lead beyond 10 km.
As per clause no 302 of MOST specification.

3.2.4A Earth work excavation in soil unsuitable for road cum 24.68
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by mechanical means. As per
clause no 302 of MOST specification.

3.2.4B Earth work excavation in soil unsuitable for road cum 29.28
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by mechanical means lead for 2
km. As per clause no 302 of MOST

3.2.4C Earth work excavation in soil unsuitable for road cum 32.97
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by mechanical means lead for 3
 km. As per clause no 302 of MOST

3.2.4D Earth work excavation in soil unsuitable for road cum/km 3.45
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by mechanical means lead for 4
km. to 10 km. As per clause no 302 of MOST
specification.

3.2.4E Earth work excavation in soil unsuitable for road cum/km 3.22
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for ordinary soil - when lead of
earth work is more than 495 metres - loading
and unloading by mechanical means lead
above 10 km. As per clause no 302 of MOST
specification.

3.2.4F Earth work excavation in soil unsuitable for road cum 22.70
construction such as marshy soil including
pumping out water, removal of the same and
disposal within a lead of 15 metres - extra for
additional lead for hard soil. As per clause no
302 of MOST specification.

3.3 Dressing of earth work including cutting and cum 18.34

filling upto 15cm. As per clause no 302 of
MOST specification.

3.4 Box cutting/trenching the sub grade to proper sqm 0.44

slope, camber and removing inequalities
including removing the stuff and depositing on
the road side slopes (cutting of earth shall be
paid separately in the respective item on the
basis of classification of the excavation done by
Engineer). As per clause no 302 of MOST
specification.

3.6 Compaction of original ground with maximum sqm 2.03

of six passes of 8 to 10 tonnes power roller
including filling in depression occuring during
rolling. As per clause no 305.3.4 of MOST
specification.

3.7.1 Extra for laying earth as per specification for cum 3.89
compaction in 250mm thick loose layers and
dressing but excluding rolling and watering by
manual means when laying of earth in layers is
done simultaneously with excavation of earth
work. As per clause no 305.3.5 of MOST
 specification.

3.7.3 Extra for laying earth as per specification for cum 15.63
compaction in 250mm thick loose layers and
dressing but excluding rolling and watering by
mechanical means from earth in stockpiles. As
per clause no 305.3.5 of MOST specification.

3.7.4 Extra for watering the earth to bring the earth cum 4.06
upto required optimum moisture content by
mechanical means - compacted earth. As per
clause no 305.3.5 of MOST specification.

3.7.5 Extra for rolling to specification with the use of cum 10.98
vibratory roller when earth is at suitable
moisture contents with desired field density not
less than 95% of maximum dry density
(modified heavy proctor test). As per clause no
305.3.5 of MOST specification.

3.7.6 Extra for rolling to specification with the use of cum 13.73
vibratory roller when earth is at suitable
moisture contents with desired field density not
less than 100% of maximum dry density
(modified heavy proctor test). As per clause no
305.3.5 of MOST specification.

3.7.7 Extra for rolling to specification with power cum 4.92

roller when earth is at suitable moisture
contents with dry field density not less than 95%
of maximum dry density (ordinary proctor test).
As per clause no 305.3.3 of MOST specification.

3.7.8 Extra for rolling to specification with power cum 6.15

roller when earth is at suitable moisture
contents with dry field density not less than
100% of maximum dry density (ordinary proctor
test) As per clause no 305.3.3 of MOST
specification.

3.8.4A Earth work in excavation in foundation trenches cum 461.92

etc. not exceeding 2 meters depth including
dressing of bottom and sides of trenches,
stacking the excavated soil clear from the edge
of excavation and subsequent filling around
hume pipes/masonry, in 15cm layers with
compaction including disposal of all surplus
soil, as directed within a lead of 30 metres -
chiseling/wedging out of rock where blasting is
prohibited - soft rock. As per clause no 304 of
MOST specification.
3.8.4B Earth work in excavation in foundation trenches cum 805.57
etc. not exceeding 2 meters depth including
dressing of bottom and sides of trenches,
stacking the excavated soil clear from the edge
 of excavation and subsequent filling around
hume pipes/masonry, in 15cm layers with
compaction including disposal of all surplus
soil, as directed within a lead of 30 metres -
chiseling/wedging out of rock where blasting is
prohibited - hard rock (pick work). As per clause
no.304 of MOST specification.

3.10.4A Earthwork in excavation in foundation trenches cum 369.71

etc. in drains and channels etc. not exceeding 2
metres depth including dressing of bottom and
sides of trenches stacking the excavated soil
clear from the edge of excavation including
disposal of surplus soil as directed within a lead
of 30 metres - chiselling/wedging out of rock
(where blasting is prohibited) - soft rock. As per
clause no 304.3.7 of MOST specification.

3.10.4B Earthwork in excavation in foundation trenches cum 644.75

etc. in drains and channels etc. not exceeding 2
metres depth including dressing of bottom and
sides of trenches stacking the excavated soil
clear from the edge of excavation including
disposal of surplus soil as directed within a lead
of 30 metres - chiselling/wedging out of rock
(where blasting is prohibited) - hard rock. As per
clause no 304.3.7 of MOST specification.
 4 . Granular Sub-base
Code Description Unit Rate

4.1A.1 Construction of granular sub-base by providing cum 818.99

close graded material, mixing in a mechanical
mix plant at OMC, carriage of mixed material to
work site, spreading in uniform layer with motor
grader on prepared surface and compacting
with vibratory power roller to achieve the
desired density, complete as per clause 401of
MoRTH specification, 4th Revision - by plant
mix method for grading I material.

4.1B.1 Construction of granular sub-base by providing cum 748.58

close graded material, spreading in uniform
layer with motor grader on prepared surface,
mixing by mix in place method with rotavator at
OMC and compacting with vibratory roller to
achieve the desired density, complete as per
clause 401 of MoRTH specification, 4th
Revision - by mix in place method - for grading
I material.

4.1A.2 Construction of granular sub-base by providing cum 801.08

close graded material, mixing in a mechanical
mix plant at OMC, carriage of mixed material to
work site, spreading in uniform layer with motor
grader on prepared surface and compacting
with vibratory power roller to achieve the
desired density, complete as per clause 401 of
MoRTH specification, 4th Revision - by plant
mix method - for grading II material.

4.1B.2 Construction of granular sub-base by providing cum 730.68

close graded meterial, spreading in uniform
layer with motor grader on prepared surface, by
mixing place method with rotavator at OMC
and compacting with vibratory roller to achieve
the desired density, complete as per clause
401 of MoRTH specification, 4th Revision - By
mix in place method - For grading II material.

4.1A.3 Construction of granular sub-base by providing cum 708.93

close graded material, mixing in a mechanical
mix plant at OMC, carriage of mixed material to
work site, spreading in uniform layer with motor
grader on prepared surface and compacting
with vibratory power roller to achieve the
desired density, complete as per clause 401 of
MoRTH specification, 4th Revision - by plant
mix method - for grading III material.
4.1B.3 Construction of granular sub-base by providing cum 638.53
close graded meterial, spreading in uniform
layer with motor grader on prepared surface, by
mixing place method with rotavator at OMC
and compacting with vibratory roller to achieve
the desired density, complete as per clause
401 of MoRTH specification, 4th Revision - By
mix in place method - For grading III material.

4.2.1 Construction of granular sub-base by providing cum 784.96

coarse graded material, spreading in uniform
layers with motor grader on prepared surface,
mixing by mix in place method with rotavator
at OMC and compacting with vibratory roller to
achieve the desired density, complete as per
clause 401 of MoRTH specification, 4th
Revision - For grading I material.

4.2.2 Construction of granular sub-base by providing cum 824.53

coarse graded meterial, spreading in uniform
layer with motor grader on prepared surface,
mixing by mix in place method with rotavator at
OMC and compacting with vibratory roller to
achieve the desired density, complete as per
clause 401 of MoRTH specification, 4th
Revision - For grading II material.

4.2.3 Construction of granular sub-base by providing cum 627.06

coarse graded meterial, spreading in uniform
layer with motor grader on prepared surface,
mixing by mix in place method with rotavator at
OMC and compacting with vibratory roller to
achieve the desired density, complete as per
clause 401 of MoRTH specification, 4th
Revision - For grading III material.

4.3A Laying and spreading available soil in the cum 124.35

sub-grade on a prepared surface, pulverising,
mixing the spread soil in place with rotavator
with 3 percent slaked lime having minimum
content of 70 percent CaO, grading with motor
grader and compacting with the road roller at
OMC to the desired density to form a layer of
improved sub-grade - by mechanical means. (As
per MoRTH specification, 4th Revision)

4.3B Laying and spreading available soil in the cum 105.32

sub-grade on a prepared surface, pulverising,
mixing the spread soil in place with rotavator
with 3 percent slaked lime having minimum
content of 70 percent CaO, grading with motor
grader and compacting with the road roller at
 OMC to the desired density to form a layer of
improved sub-grade - by manual means. (As per
MoRTH specification, 4th Revision)

4.4 Providing, Laying and spreading soil on a cum 152.03

prepared sub-grade, pulverising, mixing the
spread soil in place with rotavator with 3
percent slaked lime with minimum content of
70 percent of CaO, grading with motor grader
and compacting with the road roller at OMC to
achieve atleast 98 percent of the maximum dry
density to form a layer of sub-base. (As per
MoRTH specification, 4th Revision)

4.5 Providing, Laying and spreading soil on a cum 366.22

prepared sub-grade, pulverising, adding the
designed quantity of cement to the spread soil
,mixing in place with rotavator, grading with the
motor grader and compacting with the road
roller at OMC to achieve the desired
unconfined compressive strength and to form a
layer of sub-base / base. (As per MoRTH
specification, 4th Revision)

4.6.1 Providing, Laying and spreading material on a cum 1079.68

prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading with the
motor grader and compacting with the road
roller at OMC to achieve the desired
unconfined compressive strength and to form a
layer of sub-base. Grading of material for
sub-base course. (As per MoRTH specification,
4th Revision)

4.6.2 Providing, Laying and spreading material on a cum 1022.34

prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading with the
motor grader and compacting with the road
roller at OMC to achieve the desired
unconfined compressive strength and to form a
layer of base. Grading of material for base
course. (As per MoRTH specification,
4th Revision)

4.7 Making 50 x 50mm furrows, 25mm deep 45 sqm 1.23

degree to the centre line of the road and at one
metre interval in the existing thin bituminous
wearing coarse including sweeping and
disposal of excavated material within 1000
metres lead. (As per MoRTH specification,
4th Revision)
4.8 Construction of inverted choke by providing, cum 427.80
laying, spreading and compacting screening B
type / coarse sand of specified grade in uniform
layer on a prepared surface with motorgrader
and compacting with power roller etc. (As per
MoRTH specification, 4th Revision).

4.9.1A Providing, laying, spreading and compacting cum 887.46

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite type A 13.2mm stone
for screening and gravel for binding to fill up
the interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-I
with stone screening. (As per MoRTH
specification, 4th Revision).

4.9.1B Providing, laying, spreading and compacting cum 780.54

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite Crushable type such as
moorum/gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-I with Gravel screening. (As
per MoRTH specification, 4th Revision)

4.9.1.1A Providing, laying, spreading and compacting Cum 853.95

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in stages
to proper grade and camber, applying and
brooming requisite type A 13.2mm stone for
screening and gravel for binding to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by
mechanical means - Water bound macadam
Gr-I with stone screening. (As per MoRTH
specification, 4th Revision)

4.9.1.1B Providing, laying, spreading and compacting Cum 747.03

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
 stages to proper grade and camber, applying
and brooming requisite Crushable type such as
moorum/gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means - Water
bound macadam Gr-I with Gravel screening.
(As per MoRTH specification, 4th Revision)

4.9.2A Providing, laying, spreading and compacting cum 872.94

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite type A 13.2mm stone
for screening and gravel for binding to fill up
the interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-II
with stone screening 13.2mm metal. (As per
MoRTH specification, 4th Revision).

4.9.2B Providing, laying, spreading and compacting cum 938.67

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in stages
to proper grade and camber, applying and
brooming requisite type B 11.2mm stone for
screening and gravel for binding to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by manual
means - Water bound macadam Gr-II with stone
screening 11.2mm metal. (As per MoRTH
specification, 4th Revision).

4.9.2C Providing, laying, spreading and compacting Cum 832.46

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in stages
to proper grade and camber, applying and
brooming requisite Crushable type such as
moorum or gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-II with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)
4.9.2.1A Providing, laying, spreading and compacting Cum 839.43
stone aggregates of specific sizes to water
bound macadam specification including
 spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite type A 13.2mm stone
for screening and gravel for binding to fill up
the interstices of coarse aggregate, watering
and compacting to the required density - by
mechanical means - Water bound macadam
Gr-II with stone screening 13.2mm metal. (As
per MoRTH specification, 4th Revision).

4.9.2.1B Providing, laying, spreading and compacting Cum 905.16

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in stages
to proper grade and camber, applying and
brooming requisite type B 11.2mm stone for
screening and gravel for binding to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by
mechanical means - Water bound macadam
Gr-II with stone screening 11.2mm metal. (As
per MoRTH specification, 4th Revision).

4.9.2.1C Providing, laying, spreading and compacting Cum 798.95

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite Crushable type such as
moorum or gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanicall means -
Water bound macadam Gr-II with moorum or
gravel screening. (As per MoRTH specification,
4th Revision)

4.9.3A Providing, laying, spreading and compacting Cum 1010.07

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite type B screening and
binding materials to fill up the interstices of
coarse aggregate, watering and compacting to
the required density - by manual means - Water
bound macadam Gr-III with type B 11.2mm
screening. (As per MoRTH specification,
4th Revision).
4.9.3C Providing, laying, spreading and compacting Cum 920.30
stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite Crushable type such as
moorum or gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-III with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.9.3.1A Providing, laying, spreading and compacting Cum 976.56

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite type B screening and
binding materials to fill up the interstices of
coarse aggregate, watering and compacting to
the required density - by mechanical means -
Water bound macadam Gr-III with type B
11.2mm screening. (As per MoRTH
specification, 4th Revision).

4.9.3.1C Providing, laying, spreading and compacting Cum 886.80

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in
stages to proper grade and camber, applying
and brooming requisite Crushable type such as
moorum or gravel for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means - Water
bound macadam Gr-III with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)
4.10A Breaking and crushing of material obtained by cum 104.61
breaking damaged cement concrete slabs to
size range not exceeding 75mm as specified in
table 400.7 transporting the aggregates
obtained from breaking of cement concrete
slabs at a lead of L km, laying and compacting
the same as sub-base course, constructed as
WBM to Clause 404 except the use of screening
or binding material - using Vibratory roller. (As
per MoRTH specification, 4th Revision)
4.10B Breaking and crushing of material obtained by cum 97.27
breaking damaged cement concrete slabs to
size range not exceeding 75mm as specified in
table 400.7 transporting the aggregates
obtained from breaking of cement concrete
slabs at a lead of L km, laying and compacting
the same as sub-base course, constructed as
WBM to Clause 404 except the use of screening
or binding material - using smooth 3 wheeled
steel roller. (As per MoRTH specification, 4th
Revision).

4.11 Spraying of bitumen over cleaned dry surface of sqm 12.55

crushed cement concrete base at the rate of
25kg per 10 sqm by a bitumen pressure
distributor, spreading of key aggregates at the
rate of 0.13 cum per 10 sqm by a mechanical
gritter and rolling the surface as per Clause
506.3.8. of MoRTH specification, 4th Revision

4.12A Providing, laying, spreading and compacting cum 910.69

graded stone aggregate to wet mix macadam
specification including premixing the material
with water at OMC in mechanical mix plant
carriage of mixed material by tipper to site,
laying in uniform layers with paver in sub-base /
base course on well prepared surface and
compacting with vibratory roller to achieve the
desired density - Using vibratory roller. (As per
MoRTH specification, 4th Revision)

4.12B Providing, laying, spreading and compacting cum 907.84

graded stone aggregate to wet mix macadam
specification including premixing the material
with water at OMC in mechanical mix plant
carriage of mixed material by tipper to site,
laying in uniform layers with paver in sub-base /
base course on well prepared surface and
compacting with smooth 3 wheeled steel roller
to achieve the desired density (As per MoRTH
specification, 4th Revision).

4.13 Construction of Median and island above road cum 69.03

level with approved material deposited at site
from roadway cutting and excavation for drain
and foundation of other structures, spread,
graded and compacted as per clause 407 of
MoRTH specification, 4th Revision

4.14 Construction of Median and island above road cum 86.36

level with approved material brought from
borrowpits, spread, sloped and compacted as
per clause 407 of MoRTH specification,
4th Revision.
4.16 Construction of footpath / separator by providing sqm 610.58
a 150mm compacted granular sub-base as per
clause 401 and 25mm thick cement concrete
grade M15, overlaid with precast concrete tiles
in cement mortor 1:3 including provision of all
drainage arrangements but excluding kerb
channel. (As per MoRTH specification,
4th Revision).

4.17A.1 Providing crushed stone aggregates, depositing cum 771.98

on a prepared surface by hauling vehicles,
spreading and mixing with a motor grader,
watering and compacting with a vibratory roller
to clause 410 of MoRTH specification, 4th
Revision to form a layer of sub-base / base - by
mix in place method - For 53mm maximum size.

4.17B.1 Providing crushed stone aggregates, depositing cum 529.31

on a prepared surface by hauling vehicles,
spreading and mixing with a motor grader,
watering and compacting with a vibratory roller
to clause 410 of MoRTH specification, 4th
Revision to form a layer of sub-base / base - by
mixing plant - For 53mm maximum size.

4.17A.2 Providing crushed stone aggregates, depositing cum 796.28

on a prepared surface by hauling vehicles,
spreading and mixing with a motor grader,
watering and compacting with a vibratory roller
to clause 410 of MoRTH specification, 4th
Revision, to form a layer of sub-base / base - by
mix in place method - For 45mm maximum size.

4.17B.2 Providing crushed stone aggregates, depositing cum 544.49

on a prepared surface by hauling vehicles,
spreading and mixing with a motor grader,
watering and compacting with a vibratory roller
to clause 410 of MoRTH specification, 4th
Revision, to form a layer of sub-base / base - by
mixing plant - For 45mm maximum size.

4.18 Construction of sub-base using lime - flyash cum 149.67

admixture with granular soil, free from organic
matter/deleterious material or clayey silts and
low plasticity clays having PI between 5 and 20
and liquid limit less than 25 and commercial
dry lime, slaked at site or pre-slaked with CaO
content not less than 50 percent, flyash to
conform to gradation as per clause 4.3 of
IRC:88-1984, lime + flyash content ranging
between 10 to 30 percent, the minimum
unconfined compressive strength and CBR
value after 28 days curing and 4 days soaking to
be 7.5 kg/sq.cm. and 25 percent respectively,
all as specified in IRC:88-1984. (As per MoRTH
 specification, 4th Revision)

4.91A Providing, laying, spreading and compacting Cum 880.13

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth three wheeld steel roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite type
A 13.2mm stone for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-I with stone screening. (As
per MoRTH specification, 4th Revision)

4.91B Providing, laying, spreading and compacting Cum 773.21

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth three wheeled steel roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum / gravel for
screening and gravel for binding to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by manual
means - Water bound macadam Gr-I with
Gravel screening. (As per MoRTH specification,
4th Revision).

4.91.1A Providing, laying, spreading and compacting Cum 846.62

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type A
13.2mm stone for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means - Water
bound macadam Gr-I with stone screening. (As
per MoRTH specification, 4th Revision)

4.91.1B Providing, laying, spreading and compacting Cum 739.70

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth three wheeled steel roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum/gravel for
screening and gravel for binding to fill up the
 interstices of coarse aggregate, watering and
compacting to the required density - by
mechanical means - Water bound macadam
Gr-I with Gravel screening. (As per MoRTH
specification, 4th Revision)

4.92A Providing, laying, spreading and compacting Cum 865.61

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type A
13.2mm stone for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-II with stone screening
13.2mm metal. (As per MoRTH specification,
4th Revision)

4.92B Providing, laying, spreading and compacting Cum 931.33

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type B
11.2mm stone for screening / gravel for binding
to fill up the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-II with stone screening 11.2mm
metal. (As per MoRTH specification, 4th
Revision)

4.92C Providing, laying, spreading and compacting Cum 825.12

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeld steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite Crushable
type such as moorum or gravel for screening
and gravel for binding to fill up the interstices of
coarse aggregate, watering and compacting to
the required density - by manual means - Water
bound macadam Gr-II with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.92.1A Providing, laying, spreading and compacting Cum 832.10

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
 rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type A
13.2mm stone for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means - Water
bound macadam Gr-II with stone screening
13.2mm metal. (As per MoRTH specification,
4th Revision)

4.92.1B Providing, laying, spreading and compacting Cum 897.82

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type B
11.2mm stone for screening and gravel for
binding to fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means - Water
bound macadam Gr-II with stone screening
11.2mm metal. (As per MoRTH specification,

4.92.1C Providing, laying, spreading and compacting Cum 791.62

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite Crushable
type such as moorum or gravel for screening
and gravel for binding to fill up the interstices of
coarse aggregate, watering and compacting to
the required density - by mechanicall means -
Water bound macadam Gr-II with moorum or
gravel screening. (As per MoRTH specification,
4th Revision)

4.93A Providing, laying, spreading and compacting Cum 1002.73

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type B
screening and binding materials to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by manual
means - Water bound macadam Gr-III with type
B 11.2mm screening. (As per MoRTH

4.93.1A Providing, laying, spreading and compacting Cum 969.23

stone aggregates of specific sizes to water
 bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite type B
screening and binding materials to fill up the
interstices of coarse aggregate, watering and
compacting to the required density - by
mechanical means - Water bound macadam
Gr-III with type B 11.2mm screening. (As per
MoRTH specification, 4th Revision)

4.93.1C Providing, laying, spreading and compacting Cum 879.46

stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand packing,
rolling with smooth 3 wheeled steel roller 8-10
tonnes in stages to proper grade and camber,
applying and brooming requisite Crushable
type such as moorum or gravel for screening
and gravel for binding to fill up the interstices of
coarse aggregate, watering and compacting to
the required density - by mechanical means -
Water bound macadam Gr-III with moorum or
gravel screening. (As per MoRTH specification,
4th Revision)
 5 . Base
Code Description Unit Rate

5.1 Providing and applying primer coat with sqm 10.46

bitumen emulsion on prepared surface of
granular base including clearing of road surface
and spraying primer at the rate of 0.60 kg/sqm
using mechanical means. (As per MoRTH
specification, 4th Revision)

5.2 Providing and applying tack coat with bitumen sqm 4.03
emulsion using emulsion pressure distributor at
the rate of 0.20 kg. per sqm. on the prepared
bituminous / granular surface cleaned with
mechanical broom. (As per MoRTH
specification, 4th Revision)

5.3A Providing and laying bituminous macadam with cum 2324.65

hot mix plant of capacity not less than 40 to
60 TPH using crushed aggregates of specified
grading premixed with bituminous binder,
transported to site, laid over a previously
prepared surface with paver finisher to the
required grade, level and alignment and rolled
as per clauses 501.6 and 507.7 of MoRTH
specification, 4th Revision, to achieve the
desired compaction.- Using grade I metal and
bitumen 60/70 grade.

5.3B Providing and laying bituminous macadam with cum 2267.83

hot mix plant of capacity not less than 40 -60
TPH using crushed aggregates of specified
grading premixed with bituminous binder,
transported to site, laid over a previously
prepared surface with paver finisher to the
required grade, level and alignment and rolled
as per clauses 501.6 and 507.7 of MoRTH
specification, 4th Revision, to achieve the
desired compaction. - using grade II metal and
bitumen 60/70 grade.

5.5 Providing, laying and rolling of built-up spray sqm 121.25

grout layer over prepared base consisting of a
two layer composite construction of compacted
crushed coarse aggregates using motor grader
for aggregates. Key stone chips spreader may
be used with application of bituminous binder
after each layer and with key aggregates placed
on top of the second layer to serve as a base
conforming to the line, grades and cross-section
specified ,the compacted layer thickness being
75mm. (As per MoRTH specification, 4th
Revision).
5.6A Providing and laying dence graded bituminous cum 2536.88
macadam with HMP of capacity not less than
40 to 60 TPH using crushed aggregates of
specified grading, premixed with bituminouse
binder @ 4.0 to 4.5 per cent by weight of total
mix and filler, tranporting the hot mix to work
site, laying with a hydrostatic paver finisher with
sensor control to the required grade, level and
alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achive the
desired compaction as per Clause 507 of
MoRTH specification, 4th Revision, complete in
all respects – Using grade-I materials.

5.6B Providing and laying dence graded bituminous Cum 2523.84

macadam with HMP of capacity not less than
40 to 60 TPH using crushed aggregates of
specified grading, premixed with bituminouse
binder @ 4.0 to 4.5 per cent by weight of total
mix and filler, tranporting the hot mix to work
site, laying with a hydrostatic paver finisher with
sensor control to the required grade, level and
alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achive the
desired compaction as per Clause 507 of
MoRTH specification, 4th Revision, complete in
all respects – Using grade-I materials.

5.7A Providing and laying semi-dense bituminous Cum 2737.90

concrete with HMP of capacity not less than 40 -
60 TPH using crushed aggregates of specified
grading, premixed with bituminous binder @
4.5 to 5 percent of mix and filler, transporting
the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to
the required grade, level and alignment, rolling
with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per
clause 508 of MoRTH specification, 4th
Revision, complete in all respects - Using
grade-I material and bitumen 60/70 grade.

5.7B Providing and laying semi-dense bituminous Cum 2865.35

concrete with HMP of capacity not less than 40
- 60 TPH using crushed aggregates of specified
grading, premixed with bituminous binder @
4.5 to 5 percent of mix and filler, transporting
the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to
the required grade, level and alignment, rolling
with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per
clause 508 of MoRTH specification, 4th
Revision, complete in all respects - Using
 grade-II material and using birumen 60/70
grade.

5.8A Providing and laying bituminous concrete with Cum 2835.82

HMP of capacity not less than 40 to 60 TPH
using crushed aggregates of specified grading,
premixed with bituminous binder @ 5.4 to 5.6
percent of mix and filler, transporting the hot
mix to work site, laying with a hydrostatic paver
finisher with sensor control to the required
grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers
to achieve the desired compaction as per
clause 509 of MoRTH specification, 4th
Revision)

5.8B Providing and laying bituminous concrete with Cum 2807.18

HMP of capacity not less than 40 to 60 TPH
using crushed aggregates of specified grading,
premixed with bituminous binder @ 5.4 to 5.6
percent of mix and filler, transporting the hot
mix to work site, laying with a hydrostatic paver
finisher with sensor control to the required
grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers
to achieve the desired compaction as per
clause 509 of MoRTH specification, 4th
Revision)

5.9A Providing and laying surface dressing as Sqm 29.89

wearing course in single coat using crushed
stone aggregate of specified size on a layer of
bituminous binder laid on prepared surface and
rolling with 8-10 tonne smooth wheeled steel
roller - Using 19mm nominal chipping size. (As
per MoRTH specification, 4th Revision)

5.9B Providing and laying surface dressing as Sqm 18.97

wearing course in single coat using crushed
stone aggregate of specified size on a layer of
bituminous binder laid on prepared surface and
rolling with 8-10 tonne smooth wheeled steel
roller - Using 13mm nominal chipping size. (As
per MoRTH specification, 4th Revision)

5.10A Providing, laying and rolling of open graded Sqm 41.01

premix surfacing of 20mm thickness composed
of 13.2mm to 5.6mm aggregates either using
penetration grade bitumen or cut-back or
emulsion to required line, grade and level to
serve as wearing course on a previously
prepared base, including mixing in a suitable
plant, laying and rolling with a smooth wheeled
roller 8-10 tonne capacity, finished to required
level and grades - Mechanical method using
 penetration grade bitumen and HMP of
appropriate capacity not less than
40 to60 tonne/hour. (As per MoRTH
specification, 4th Revision)

5.10B Providing, laying and rolling of open graded Sqm 53.07

premix surfacing of 20mm thickness composed
of 13.2mm to 5.6mm aggregates either using
penetration grade bitumen or cut-back or
emulsion to required line, grade and level to
serve as wearing course on a previously
prepared base, including mixing in a suitable
plant, laying and rolling with a smooth wheeled
roller 8-10 tonne capacity, finished to required
level and grades - Open graded premix
surfacing using cationic bitumen emulsion. (As
per MoRTH specification, 4th Revision)

5.11A Providing, laying and rolling of close-graded Sqm 49.83

premix surfacing materials of 20mm thickness
composed of 11.2mm to 0.09mm (Type-A)
aggregates using penetration grade bitumen to
the required line, grade and level to serve as
wearing course on a previously prepared base,
including mixing in a suitable plant, laying and
rolling with a smooth wheeled roller 8-10 tonne
capacity, and finishing to required level and
grade - Using Type A materials. (As per MoRTH
specification, 4th Revision)

5.11B Providing, laying and rolling of close-graded Sqm 47.23

premix surfacing materials of 20mm thickness
composed of 13.2mm to 0.09mm (Type-B)
aggregates using penetration grade bitumen to
the required line, grade and level to serve as
wearing course on a previously prepared base,
including mixing in a suitable plant, laying and
rolling with a smooth wheeled roller 8-10 tonne
capacity, and finishing to required level and
grade - Using Type B materials. (As per MoRTH
specification, 4th Revision)

5.12A Providing and laying seal coat sealing the voids Sqm 20.08
in a bituminous surface laid to the specified
levels, grades and cross fall using Type A seal
coat. (As per MoRTH specification, 4th Revision)

5.12B Providing and laying of premix sand seal coat Sqm 15.21
with HMP of appropriate capacity not less than
40 to 60 tonne/hour using crushed stone
chipping 6.7 mm size and penetration bitumen
of suitable grade - Type B (As per MoRTH
specification, 4th Revision)
 7 . Culverts
Code Description Unit Rate

7.6C Steel reinforcement for R.C.C. works including Tonne 39941.00

bending, binding and placing in position - TMT
Rods.

7.1A Cement concrete 1:4:8 mix with stone cum 1617.32

aggregate 40mm nominal size in foundation
upto a depth of 1.5 metres below ground level
and upto height of 1.5 above ground/bed level.

7.1B Cement concrete 1:3:6 mix with stone cum 1878.32

aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a depth
of 1.5 metres below ground level and 1.5
metres ground / bed level.

7.2 Plain cement concrete m-15 mix with stone cum 2246.51
aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a depth
of 1.50 metres below ground level and/or 1.50
metres above ground/bed level.

7.3 Plain cement concrete m-15 mix with stone cum 2283.32
aggregates 20mm nominal size mechanically
mixed and vibrated in superstructure upto 4.00
metre above, 1.50 metre from ground/bed level.

7.7 First class brick in cement mortar 1:3 upto a cum 1579.71
depth of 1.50 metres below ground and above
1.50 from bed/ground level.

7.9 Brick or edge flooring with 1st class bricks sqm 169.51
including cement slurry in cement sand mortar 1:4

7.16 Cement plaster 12mm thick in cement mortar 1:3 sqm 55.92

7.21A Providing and filling in foundation trenches and cum 508.25

at the back of abutments, wing walls etc. and
below pipe bed in layers not exceeding 150mm
thick including watering and compacting
including all lead and lifts. - Good local sand
free from earth.

7.21B Providing and filling in foundation trenches and cum 357.55

at the back of abutments, wing walls etc. and
below pipe bed in layers not exceeding 150mm
thick including watering and compacting
including all lead and lifts. - Selected granular
material in filling.
7.6A Steel reinforcement for RCC works including Deleted
bending, binding and placing in position – mild
steel and medium tensile steel bars.

7.6B Steel reinforcement of RCC works including Deleted

bending, binding and placing in position – cold
twisted bars.
 8 . Traffic and Transportation
Code Description Unit Rate

8.12 Engraving letters in hard stone. (unit=per cm unit 1.36

height per letter).

8.18 Marking on road with hot thermoplastic paint sqm 590.00

3mm thick including transporting, labour
charge, heating and applying paint by using
machine etc., complete.
BRIDGE WORK
 1 . Earth Work
Code Description Unit Rate

1.4.2 Earth work in excavation of foundation for Cum 483.41

structures complete - ordinary rock - if blasting is
not resorted to.

1.5.2 Earth work in excavation of foundation for Cum 777.03

structures complete - hard rock (blasting prohibited)

1.20 Sand filling in foundation trenches. Cum 411.51

1.21 Back filling behind abutment, wing wall and Cum 337.64
return wall complete - gravelly material.

1.22 Back filling behind abutment, wing wall and Cum 490.76
return wall complete - sandy material.
 2 . Foundation
Code Description Unit Rate

2.8C Thermo Mechanically Treated reinforcement Tonne 39578.00

complete in foundation

2.1 Brick masonry work in cement mortar 1:3 (1 Cum 1683.69

cement :3 sand) in foundation complete
excluding pointing and plastering.

2.3.2 Cement concrete for plain concrete in open Cum 2428.75

foundation complete including form work
-P.C.C. M20 grade.

2.3.3 Cement concrete for plain concrete / reinforced Cum 2749.98

concrete in open foundation - including form
work -P.C.C. M25 grade.

2.3.5 Cement concrete for reinforced concrete in Cum 2545.08

open foundation complete -including form work
but excluding steel reinforcement - R.C.C M20
grade.

2.3.6 Cement concrete for reinforced concrete in Cum 2622.79

open foundation complete - including form work
but excluding steel reinforcement - R.C.C M25
grade.

2.4 Providing and laying cutting edge of mild steel Tonne 45589.50
for well foundation complete.

2.5.1.1 Cement concrete for plain concrete complete - Cum 2255.89

well steining - including form work - P.C.C. M15
grade.

2.5.1.2 Cement concrete for plain concrete - well Cum 2677.13

steining - including form work -P.C.C. M20
grade.

2.5.2.1 Cement concrete for plain concrete complete Cum 2150.89

-top / intermediate plug - including extra
protective work and dewatering -P.C.C. M15
grade.

2.5.2.3 Cement concrete for plain concrete complete Cum 2749.98

-top / intermediate plug - including extra
protective work and dewatering -P.C.C. M25
grade.

2.5.3.2 Cement concrete for plain cement concrete Cum 2810.85

complete - bottom plug -including forming of
sump, protective bunds chiselling - P.C.C. M20
grade.
2.5.3.3 Cement concrete for plain concrete complete - Cum 3014.42
bottom plug - including forming of sump,
protective bunds chiselling - P.C.C. M25 grade.

2.5.4.1 Cement concrete for reinforced concrete Cum 2650.08

complete - well curb - including form work but
excluding steel reinforcement -R.C.C M20
grade.

2.5.4.2 Cement concrete for reinforced concrete Cum 2727.79

complete - well curb - including form work but
excluding steel reinforcement -R.C.C M25
grade.

2.5.5.1 Cement concrete for reinforced concrete Cum 2905.09

complete - well steining - including form work
but excluding steel reinforcement -R.C.C M20
grade.

2.5.5.2 Cement concrete for reinforced concrete Cum 2727.79

complete - well steining - including form work
but excluding steel reinforcement -R.C.C M25
grade.

2.5.6.1 Cement concrete for reinforced concrete Cum 2520.77

complete - well cap - including form work but
excluding steel reinforcement -R.C.C M20
grade.

2.5.6.2 Cement concrete for reinforced concrete Cum 2630.58

complete - well cap - including form work but
excluding steel reinforcement -R.C.C M25
grade.

2.5.6.3 Cement concrete for reinforced concrete Cum 2736.80

complete - well cap - including form work but
excluding steel reinforcement -R.C.C M30
grade.

2.5.6.4 Cement concrete for reinforced concrete Cum 3122.66

complete - well cap - including form work but
excluding steel reinforcement -R.C.C M35
grade.

2.7 Sand filling in wells complete. Cum 411.51

2.13.1A.1 Cement concrete for reinforced concrete in pile Cum 3025.79

cap complete-R.C.CM25 grade-if the bottom
level of pile cap is below the water table.

2.13.1B.1 Cement concrete for reinforced concrete in pile Cum 3144.80

cap complete-R.C.CM30 grade-if the pile level
of the pile cap is below the water table.
2.13.1A.2 Cement concrete for reinforced in pile cap Cum 5023.04
complete-R.C.CM25 grade-if the pile cap rests
on ground.

2.13.1B.2 Cement concrete for reinforced concrete in pile Cum 5142.05

cap complete - R.C.C M30 grade - if the pile
cap rests on ground.

2.13.1C.2 Cement concrete for reinforced concrete in pile Cum 5546.20

cap complete-R.C.CM35 grade-if the pile cap
rests on ground.
 3 . SubStructure
Code Description Unit Rate

3.5C Thermo Mechanically Treated reinforcement in Tonne 39578.00

sub-structure complete

3.1 Brick masonry work in cement mortar 1:3 for Cum 1741.00
substructure complete excluding pointing and
plastering.

3.3.1 Cement concrete for plain concrete for Cum 2155.89

substructure complete -including form work but
excluding steel reinforcement - P.C.C. M15
grade – upto 5m height.

3.3.2 Cement concrete for plain concrete for Cum 2433.75

substructure complete - including form work but
excluding steel reinforcement -P.C.C. M20
grade – upto 5m height.

3.3.3 Cement concrete for plain concrete for Cum 2754.98

substructure complete -including form work but
excluding steel reinforcement - P.C.C. M25
grade – upto 5m height.

3.3.5 Cement concrete for reinforced concrete for Cum 3019.42

substructure complete - including form work but
excluding steel reinforcement -R.C.C M35
grade. - upto 5m height.

3.4.1 Cement concrete for reinforced concrete for Cum 2550.08

substructure complete - including form work but
excluding steel reinforcement -R.C.C M20
grade - upto 5m height.

3.4.2 Cement concrete for reinforced concrete for Cum 2627.79

substructure complete - including form work but
excluding steel reinforcement -R.C.C M25
grade - upto 5m height.

3.4.3 Cement concrete for reinforced concrete for Cum 2928.84

substructure complete - including form work but
excluding steel reinforcement -R.C.C M30
grade - upto 5m height.

3.13A Providing and laying 20mm thick galvanised Metre 799.39

mild steel plate in expansion joint.

3.13B.2 Providing and fixing 20mm thick compressible Sqm 198.88

fibre board in expansion joint complete.
 4 . SuperStructure
Code Description Unit Rate

4.4A Thermo Mechanically Treated reinforcement in Tonne 39578.00

superstructure complete

4.1.1 Cement concrete for reinforced concrete in Cum 3105.57

superstructure complete - including form work
but excluding steel reinforcement - R.C.C M25
grade - for solid slab superstructure.

4.1.2 Cement concrete for reinforced concrete in Cum 3490.20

superstructure complete - including form work
but excluding steel reinforcement - R.C.C M30
grade - for solid slab superstructure.

4.2.1 Cement concrete for reinforced concrete in Cum 3344.46

superstructure complete - including form work
but excluding steel reinforcement R.C.C M25
grade - for T- beam and slab.

4.2.2 Cement concrete for reinforced concrete in Cum 3758.68

superstructure - R.C.C M30 grade - including
form work but excluding steel reinforcement - for
T- beam and slab.

4.3.1 Cement concrete for reinforced concrete in Cum 3583.35

superstructure complete - including form work
but excluding steel reinforcement - R.C.C M25
grade - for box girder and balanced cantilever.

4.3.2 Cement concrete for reinforced concrete in Cum 4027.16

superstructure complete - including form work
but excluding steel reinforcement - R.C.C M30
grade - for box girder and balanced cantilever.

4.12 Reinforced cement concrete approach slab Cum 3157.05

excluding reinforcement but including form
work complete as per drawing and technical
specification.

4.13 Plain cement concrete M15 ordinary grade Cum 2194.25

levelling course below approach slab complete
as per drawing and technical specification.

4.14 Painting on kerbs in black and yellow alternate Sqm 46.47

bands complete as per drawing and technical
specification.
 5 . Protective Works
Code Description Unit Rate

5.1C Laying apron complete as per drawing and Cum 2395.79

technical specification -cement concrete blocks
(M15 grade).

5.3B Pitching on slopes complete as per drawing and Cum 2395.79

technical specification -cement concrete blocks
M15 grade.
 6 . Repair & Rehabilitation
Code Description Unit Rate

6.2 Guniting concrete surface with cement mortar Sqm 1156.29

applied with compressor after cleaning the
surface and spraying with epoxy complete as
per technical specification.
 BRIDGE WORK

2. FOUNDATION

2.8A Hysd bar reinforcement in foundation complete Deleted

2.8B Mild steel reinforcement complete in foundation Deleted

2. SUBSTRUCTURE

3.5A Hysd bar reinforcement in substructure complete Deleted

3.5B Mild steel reinforcement in substructure complete Deleted

4. SUPERSTRUCTURE

4.4 Hysd bar reinforcement in superstructure complete Deleted