ART-7052 HE

TECHNICAL DATA SHEET

DESCRIPTION
ART-7052 HE is an aromatic two component modified polyurea. The chemical is manufactured in two component parts and
is mixed together at the point of application to create a continuous high-performance elastomeric membrane in just seconds.
100% solids, this environmentally friendly process contains neither solvents (VOC), non CFCs. The fast reaction allows for
multiple coats, adding up to any desired thickness and in any color . Excellent performance with high and very low
temperatures .

TYPICAL PROPERTIES OF COMPONENTS

Side A Side B
Property Isocyanate Polymix
Appearance Liquid Liquid
Color Clear Amber Yellow
Specificgravity@77°F (25°C) 1.10-1.12 1.02 – 1.04
Viscosity, mPa s @ 77°F (25°C) 600-650 620-900
Ratio 1 1
Freezing point Less than 32°F (0°C)

TYPYCAL PROPERTIES OF SYSTEM

PROPERTIES RESULTS TEST

Hardness (Shore A) 97 ASTM D 2240
Hardness (Shore D) 45 ASTM D 2240
Reactivity @70 °C 4 – 5 seg
Specific Gravity 1,01 ASTM D 792
Solids 100 %
Volatile Organic Compounds 0%
Weather Resistence Aromatic system. Requires UV ASTM D 4329
protection
Elongation 270 % ± 10% DIN 53404
Tensile strength 2654 psi ± 10% DIN 53404
Tear Resistence Die C
225 Pli ± 10% ASTM D 624
Rebound resilience 30 – 33 % ASTM D 2632
Adhesion Steel 800-1000 psi / Concrete >500 psi ASTM 4541
Concrete
Taber Abrasion, mg of loss/1000 cicles, ASTM D 4541
ASTM D 4060
1000 grs, CS-17 Wheel 11 mg
Taber Abrasion, mg of loss/1000 cicles,
1000 grs, H-18 Wheel 130 mg ASTM D 4060

Printed: (03/08/2010) ; 11:22 Page :1/3

Last Modification: (11/01/2016).
 ART-7052 HE
TECHNICAL DATA SHEET

PROCESSING CONDITIONS

ART-7052 HE system components can be processed and sprayed-on high-pressure equipment. It is essential to
have equipment that consistently delivers accurate amounts of both components to the mixhead to achieve a
high-performance elastomer.

Processing
Processing Temperature 170 °F
Mixing Ratio (Side A/Side B), by Volume 1/1
Reactivity:
Gel Time: 4 – 5 Sec
Tack-Free 2 - 3 min

PROTECTION THROUGH RESISTENCE

The ART-7052 HE system provides excellent resistance to debris, bacteria and a variety of chemicals, making it a superior
product for use in a wide range of applications, from chemical transport to food handling.

Rating Rating
Chemical Categories Chemical Categories
25°C 70°C 25°C 70°C
Water 1 1 Boric Acid 4% 1 2
Sulphuric Acid 10% 2 3 Nitric Acid 10% 3 3
Sulphuric Acid 25% 2 3 Citric Acid 10% 1 1
Sulphuric Acid 50% 3 3 Castor Oil 1 2
Sulphuric Acid 60% 3 3 Heptane 1 2
NaCl Solution 10% 1 1 Gasoline 2 2
NaCl Solution 20% 1 1 Methanol 3 3
NaCl Solution 30% 1 1 Ammonium Hydroxide 28% 1 2
Methylene Chloride 3 3 Formaldehyde 37% 1 1
Sodium Hydroxide 10% 1 1 Sugar solution 30% 1 1
Sodium Hydroxide 20% 1 1 Xylene 3 3
Sodium Hydroxide 40% 1 2 Phosphoric Acid 25% 1 2
Sodium Hydroxide 50% 1 2 Phosphoric Acid 50% 1 2
Potassium Hydroxide 20% 1 3 Chloride acid 45% 2 3
Acetic Acid 2% 1 2 Hydrogen peroxide 10% 2 2
Acetic Acid 5% 1 2 Hydrogen peroxide 30% 2 2
Acetic Acid 10% 1 2 Oleic Acid 3 3
Acetic Acid 50% 3 3 Ammonium Sulphate 5% 1 1
Urea 5% 1 1 Ammonium Sulphate 10% 1 1
Urea 10% 1 1 Ammonium Sulphate 25% 1 1
Urea 25% 1 1 Ammonium Sulphate 40% 1 1
Urea 50% 1 1 Sodium Hypochlorite 13% 3 3
Diesel 1 2 Sodium Hypochlorite 3% 3 3
1 Good 2 Regular 3 Bad

Printed: (03/08/2010) ; 11:22 Page :2/3

Last Modification: (11/01/2016).
 ART-7052 HE
TECHNICAL DATA SHEET

ELECTRICAL PROPERTIES

PROPERTIES RESULTS TEST

Dielectric Constant Frequency
100 KHz 100 Hz ASTM D-150
40 ºC 4.98 5.98
60 ºC 5.12 7.18
80 ºC 5.48 9.22
Dissipation factor Frequency
100 KHz 100 Hz ASTM D-150
40 ºC 0.288 0.662
60 ºC 0.275 5.882
80 ºC 0.266 24.658
Resistivity 1.219 * 1011 ohms-cm ASTM D-257
Dielectric strength 1554 V/mil ASTM D-149

THERMAL PROPERTIES

PROPERTIE RESULTS TEST

Thermal conductivity (K)2 0.208 W / m ºC ASTM C-177

FIRE RESISTANCE

Classified as EUROCLASS E
Broof-T1 for roofs waterproofing
CFl-S1 for floorings

STORAGE AND HANDLING

Isocyanate Component: -Original containers must be kept tightly closed to prevent contamination with moisture and
foreign materials, which can adversely affect processing. The isocyanate component will react slowly with water to form
polyureas and liberate CO2 gas, which may cause sealed containers to expand and rupture. Recommended storage
temperatures between 24–40°C ( 75-104°F). Shelf life is 12 months when stored in closed, original containers at 25°C
(77°F).

Polyol Component- The Polyol component must be kept in closed drums to prevent absorption of moisture, which can
adversely affect processing. Storage should be maintained between 10-45°C (50-113°F). Shelf life is 12 months when
stored in closed, original containers at 25°C (77°F).

HEALTH AND SAFETY INFORMATION

Appropriate literature has been assembled which provides information concerning the health and safety precautions that
must be observed when handling ART-7052 isocyanate and Polyol components. Before working with these products, you
must read and become familiar with the available information on their hazards, proper use and handling. This cannot be
overemphasized. Information is available in several forms, e.g. material safety data sheet and product labels. Consult your
Artlux representative.

Printed: (03/08/2010) ; 11:22 Page :3/3

Last Modification: (11/01/2016).
 ART-7052 HE
TECHNICAL DATA SHEET

IMPORTANT INFORMATION AND SAFETY PRECAUTIONS

Liquid irritate skin and eyes. Use chemical goggles, protective clothing and rubber gloves when working with chemical
components. Vapor and spray mists may be harmful. Use only with exhaust ventilation and a positive pressure air supplied
full-face respirator. Don not use if you have chronic breathing problems or if you have had a reaction to isocyanates.

The information and data contained herein are believed to be accurate and reliable; however, it is the user’s responsibility
to determine suitability of use. Since ARTLUX cannot know all of the uses to which its products may be put or the
conditions of use, it makes no warranties concerning the fitness or suitability of this products for particular use or purpose.

Users should thoroughly test any proposed used of the artlux products and independently conclude satisfactory
performance in the application. Likewise, if the manner in which the product is used requires governmental approval or
clearance, the user must obtain approval.

ARTLUX warrants only that products will meet specification as noted. There is no warranty of fitness for use, nor any
other express or implied warranties. The user’s exclusive remedy and ARTLUX sole liability is limited to refund of the
purchase price or replacement of any product shown to be otherwise than as warranted. ARTLUX will not be held liable
for incidental or consequential damages of any kind.

Suggestions of uses should not be taken as inducements to infringe any patents.

For more complete information on the use of ART-7052 HE chemicals, please consult the TOFF Safety Manual.

Printed: (03/08/2010) ; 11:22 Page :4/3

Last Modification: (11/01/2016).