Electronics

DENISON HYDRAULICS
Request
Type Series Model Publication Description
Controller Venus 020-14141-0 9-AM651 Microprocessor-based controller for precise closed-loop control of

Pump
Drivers
Jupiter
Jupiter
S20-11712-0
S20-11958-0
9-AM681
9-AM684
position, speed, flow, and torque in a hydraulic system
500 Driver Card, Goldcup/Worldcup, F5C & SEO.3-12V valves
Hi-IQ Driver, controls displacement of variable pump, hyd. actuator
Venus Controller
w/Terminal
Product Guide
Jupiter S20-11715-0 9-AM686 Power Supply for S20-11712 & S20-11958 Driver Cards
Jupiter S20-14078-0 9-AM682 900 Driver Card (Euro), Goldcup & Premier pumps
Jupiter S20-14087-0 9-AM683 900 Driver Card (Panel), Goldcup & Premier pumps
Jupiter 762-30026-0 Call Power Supply for S20-14078 Driver Card
Jupiter S20-11716-0 Call Options Card, used w/S20-11712/-11958/-14078 Driver Cards
PQ 020-14133-0 Call PQ Driver, high performance pressure & flow control, Premier pumps
027-22070-0 Call Encapsulated dual driver with NEMA 4 / IP65 rating
027-22071-0 Call Encapsulated dual driver with NEMA 6P / IP68 rating
Valve - 701-00526-8 5-EN420 Driver Card, F5C & SEO.3-12V valves
Drivers - 701-00065-8 5-EN430 Driver Card, C1FP valve
- 701-00017-8 4-EN315 Universal Power Supply
- 701-00016-8 3-EN230 Driver Card, R1EP01 valve
- 701-00068-8 4-EN361 Driver card for 3DP03-T valve
- 701-00153-0 4-EN315 Driver Card, 4DP01-w/o Feedback 12VDC
- 701-00154-0 4-EN315 Driver Card, 4DP01-w/o Feedback 24VDC Jupiter 500 Driver
w/Power Supply
- 701-00155-0 4-EN315 Driver Card, 4DP01-w/Feedback
- 701-00156-0 4-EN340 Driver Card, 4DP02-w/o Feedback 12VDC
- 701-00157-0 4-EN340 Driver Card, 4DP02-w/o Feedback 24VDC
- 701-00158-0 4-EN340 Driver Card, 4DP02-w/Feedback
- 701-00502-8 4-EN315 12V dual driver module
- 701-00503-8 4-EN315 24V dual driver module
- 701-00507-8 4-EN315 12V driver plug
- 701-00508-8 4-EN315 24V driver plug
- 701-00600-8 9-EN601 Driver card for the 4VP01, VP01-B
- 027-22070-0 Call Encapsulated dual driver with NEMA 4 / IP65 rating
- 027-22071-0 Call Encapsulated dual driver with NEMA 6P / IP68 rating
Accessories - S20-11542-0 Call Universal input adapter card
- S20-14125-0 9-AM651 Hand held terminal for Venus Controller (020-14103-0)
- 701-00007-8 5-EN420 Eurocard Holder, 32 pin
- 701-00028-8 4-EN315 5 channel command card
- 701-00066-8 4-EN315 Eurocard Holder, 48 pin
- 762-40015-0 Call 24VDC power supply with universal AC input for all driver cards
- 796-30008/9-0 Call Joystick Control, 900 Series Stroker (Vcc=24 / 12VDC)
- 796-30013-0 Call Joystick Control with 4-20mA output
- 027-22072-0 Call 4-20mA add on option for 027-22070-0 & 027-22071-0 Jupiter Options Card
- 027-27016-0 Call 8 multi-ramp command card

Accessories
NFPA Max Pressure Request
Type Model /Cetop psi bar Publication Mounting Options & Notes
Pressure Switch PSP-01 3 - - 12-EN805 -Internal Pipe-thread 1/4” B.S.P.P.
PSP-02 5 - - 12-EN805 -Panel-board mounting with 1/4” B.S.P.P.
-Subplate mounting vertical installation PQ Driver Card
PS-055 - 73-798 5-55 12-EN805 -Subplate mounting horizontal installation
PS-100 - 145-1450 10-100 12-EN805 -Sandwich Cetop 3/5 for stackable mounting
w/Cetop configuration A6, A10 for adaption
PS-240 - 580-3480 40-240 12-EN805
PS-350 - 290-5075 20-350 12-EN805

Your single source... Denison Hydraulics has a network of sales

offices and distributors located throughout the world and is a leading global
manufacturer of hydraulic components and systems for off-highway and
construction vehicles; for mining equipment; for environmental waste and 14249 Industrial Parkway, Marysville, OH 43040
recovery equipment; for pulp and paper, chemicals and other processing TEL: (937) 644-3915 FAX: (937) 642-3738
E-Mail: [email protected] Publ. SPO-AM302-B 4-99
equipment; for ships and ordnance equipment; and for such in-plant machines
as machine tools, plastic molding, die casters and stamping presses. http://www.denisonhydraulics.com

Contact your local distributor or call toll-free for the distributor nearest you at 800-551-5956.
Axial Piston Pumps - Open Circuit / Variable Displacement Vane Pumps-Single - Fixed Displacement
Displacement Max Pressure Max Request Max Pressure Displacement Max Weight Length Request
Model in3/rev cm3/rev psi bar rpm Publication Notes Model psi bar in3/rev cm3/rev rpm lbs kgs in mm Publication
PV /T/6 0.88 14 4500 310 3000 1-AM009/315 PV Series - Rear Ported TB 2700 190 .54-2.42 9-40 3500 15 7 5.41 137.4 1-ML083
PV/T/10 1.26 21 4500 310 3000 1-AM009/315 PVT Series - Side Ported/Rear Drive T6C 4000 275 .66-6.1 11-100 2800 34 15 6.36 161.5 1-AM074
PVM Series - Rear Ported
PV/T/15 2.09 34 4500 310 2500 1-AM009/315 PVR Series - Side Ported/Rear Drive T6D 3500 240 2.9-9.64 48-158 2500 53 24 7.28 184.9 1-AM074
T6D
PV/T/M/R/20 2.62 43 4500 310 2600 1-AM009/315 PVT47 T6E 3500 240 8.7-16.41 142-269 2200 96 44 8.87 225.3 1-AM074
PV/T/29 3.78 62 4000 275 2400 1-AM009/315 T6CSH 4000 275 .66-6.1 11-100 2800 51 23 6.63 168.4 1-EN099
PVT38 4.88 80 4350 300 1800 1-AM009/315 T7B-T7BS 4650 320 .35-3.05 6-50 3600 51 23 6.63 168.4 1-AM079
PVT47 6.10 100 4350 300 1800 1-AM009/315 T6CM/CP 4000 275 .66-6.1 11-100 2800 34 15 6.36 161.5 1-AM075
PVT64 7.90 130 4350 300 1800 1-AM009/315 T6DM 3500 240 2.9-9.64 48-158 2500 53 24 7.28 184.9 1-AM075
P6V 6.00 98 6000 420 3000 1-AM021 Goldcup Series T6EM 3500 240 8.7-16.41 142-269 2200 96 44 8.87 225.3 1-AM075
P7V 7.25 119 6000 420 3000 1-AM021
P8V 8.00 131 4500 310 3000 1-AM021 Vane Pumps-Double - Fixed Displacement
P11V 11.00 180 6000 420 2400 1-AM021 T6CC Max Pressure Displacement Max Weight Length Request
Model psi bar in3/rev cm3/rev rpm lbs kgs in mm Publication
P14V 14.00 229 6000 420 2400 1-AM021
PVT15
P6W 6.00 98 6000 420 3000 1-AM012 Worldcup Series PV6 T6CC/M 4000/4000 275/275 1.32-12.2 22-200 2800 57 26 10.46 265.7 1-AM074/75
P7W 7.25 119 6000 420 3000 1-AM012 T6DC/M 3500/4000 240/275 3.56-15.74 58-258 2500 81 37 11.26 286.0 1-AM074/75
P8W 8.00 131 4500 310 2100 1-AM012 T6EC/M 3500/4000 240/275 9.35-22.5 153-369 2200 121 55 13.06 331.7 1-AM074/75
P05-SAE / P080-ISO 4.90 80 7250 500 3200 1-AM037/38 Premier Series T6ED/M 3500/3500 240/240 11.59-26.1 190-428 2200 146 66 14.22 361.2 1-AM074/75
P07-SAE / P110-ISO 6.70 110 7250 500 3000 1-AM037/38 T67BB 4350/4350 300/300 .70-6.1 12-100 3600 57 26 10.46 265.7 1-AM079
P09-SAE / P140-ISO 8.60 141 7250 500 2800 1-AM037/38 T67CB 4000/4350 275/300 1.01-9.15 17-150 2800 57 26 10.46 265.7 1-AM079
P12-SAE / P200-ISO 12.20 200 7250 500 2600 1-AM037/38 T67DB 3500/4350 240/300 3.25-12.69 53-208 2500 81 37 11.26 286.0 1-AM079
P16-SAE / P260-ISO 16.00 262 7250 500 2500 1-AM037/38 T67EB 3500/4350 240/300 9.05-19.46 148-319 2200 121 55 13.06 331.7 1-AM079
T7BB/S 3480/4650 240/320 .70-6.1 12-100 3000 71 32 10.32 262.2 1-EN097
Hydrostatic Transmissions - Closed Circuit / Var. Displacement
Displacement Max Pressure Max Request T67EDB
Vane Pumps-Triple - Fixed Displacement
Model in3/rev cm3/rev psi bar rpm Publication Notes Max Pressure Displacement Max Weight Length Request
Model psi bar in3/rev cm3/rev rpm lbs kgs in mm Publication
P6P/R 6.00 98 6000 420 3000 1-AM021/318 Goldcup P Series - Pumps
P7P/R 7.25 119 6000 420 3000 1-AM021/318 Goldcup R Series - Tandem T6DCC 3500/4000 240/275 4.22-21.84 69-358 2500 135 61 15.90 403.9 1-AM074
P8P/R 8.00 131 4500 310 3000 1-AM021/318 T6DCCM 3500/4000 240/275 4.22-21.84 69-358 2500 220 100 18.43 468.1 1-AM075
P30P
P11P/R 11.00 180 6000 420 2400 1-AM021/318 T6EDC 3500/4000 240/275 12.26-32.2 201-507 2200 220 100 18.43 468.1 1-AM075
P14P/R 14.00 229 6000 420 2400 1-AM021/318 T6EDCM 3500/4000 240/275 12.26-32.2 201-507 2200 220 100 18.43 468.1 1-AM075
P24P/R 24.60 403 5000 350 2100 1-AM021/318 T67DBB 3500/4350 240/300 3.60-15.74 59-164 2200 135 61 15.90 403.9 1-AM079
P30P/R 30.60 501 5000 350 1800 1-AM021/318 T67DCB 3500/4350 240/300 3.91-18.79 64-308 2200 135 61 15.90 403.9 1-AM079
M6V/H 6.00 98 6000 420 3000 1-AM021 Goldcup Series - Motors T67EDB 3500/4350 240/300 11.95-29.1 196-457 2200 220 100 18.43 468.1 1-AM079
M7V/H 7.25 119 6000 420 3000 1-AM021
M8V/H 8.00 131 4500 310 3000 1-AM021 Drive Train Vane Pumps - Fixed Displacement
M11V/H 11.00 180 6000 420 2400 1-AM021 Max Pressure Displacement Max Weight Length Request
M4C Model psi bar in3/rev cm3/rev rpm lbs kgs in mm Publication
M14V/H 14.00 229 6000 420 2400 1-AM021 M6/7
M24V/H 24.60 403 5000 350 2100 1-AM021 T6CR/M 4000 275 .66-6.1 11-100 2800 38 17 8.23 209.0 1-AM076
M30V/H 30.60 501 5000 350 1800 1-AM021 T6DR/M 3500 240 2.9-9.64 48-158 2500 64 29 9.33 237.0 1-AM076
T6ER/M 3500 240 8.7-16.41 142-269 2200 86 39 10.71 272.0 1-AM076
Axial Piston Pumps & Motors - Fixed Displacement T6DCCR/M 3500/4000 240/275 4.22-21.84 69-358 2200 137 62 16.32 414.5 1-AM076
T6EDCR/M 3500/4000 240/275 12.26-32.2 201-527 2200 220 100 18.87 479.3 1-AM076
Displacement Max Pressure Max Request
Model in3/rev cm3/rev psi bar rpm Publication Notes
P6F 6.00 98 6000 420 3000 1-AM021 Goldcup Series - Pumps
Hydrostatic
Vane Motors - Fixed Displacement
P7F 7.25 119 6000 420 3000 1-AM021 Transmission Displacement Max Pressure Torque Max Weight Length Request
Model in3/rev cm3/rev psi bar lb-in/psi Nm/bar rpm lbs kgs in mm Publication
P8F 8.00 131 4500 310 3000 1-AM021
M6F/G 6.00 98 6000 420 3000 1-AM021 Goldcup Series - Motors
M4DC M3B .56-2.26 9-37 3000 210 .09-.37 .15-.58 4000 18 8 5.74 145.8 2-AM157
M7F/G 7.25 119 6000 420 3000 1-AM021 M4C/SC 1.49-4.89 24-80 3400 235 .24-.78 .39-1.27 4000 34 15 7.20 182.9 2-AM157
M8F/G 8.00 131 4500 310 3000 1-AM021 M4D/SD 3.97-8.81 65-144 3400 235 .63-1.40 1.04-2.3 4000 60 27 7.80 198.1 2-AM157
M11F/G 11.00 180 6000 420 2400 1-AM021 M4E/SE 9.67-13.55 159-222 2700 186 1.54-2.16 2.52-3.53 3600 99 45 10.66 270.8 2-AM157
M14F/G 14.00 229 6000 420 2400 1-AM021 M4DC/SDC 1.49-8.81 24-144 3400 235 .24-2.18 .40-3.58 4000 88 40 13.60 345.5 2-AM157
M24F/G 24.60 403 5000 350 2100 1-AM021 M5B/BS/BF .73-2.75 12-45 4650 320 .12-.44 .19-.72 6000 41 18.5 6.59 167.3 2-EN1702
M30F/G 30.60 501 5000 350 1800 1-AM021
Valve Subplates, Adapters & Tapping Plates
Hybrid Pump - Variable Piston + Fixed Vane Pumps
Type Model Description
Request
Publication Mounting Options & Notes
Displacement Max Pressure Max Flow Max Request
Model in3/rev cm3/rev psi bar gpm L/m rpm Publication Subplates (Numerious sizes available) SP12-AM321 -NPTF and SAE connections
P1 -Side and Back Ported
T6H20B 2.62 P2.35-3.05 P1
43 P26-50 P1
3630 P24350 P1
250 P2300 23.8 90 2600 1-AM092
-Material: Steel
T6H20C P1
2.62 P2.66-6.10 P1
43 P211-100 P1
3630 P24000 P1
250 P2275 47.6 180 2600 1-AM092 M5BF
P1
T6H29B 3.80 P2.35-3.05 P1
62 P26-50 P1
3400 P24350 P1
235 P2300 23.8 90 2600 1-AM092
P1
T6H29C 3.80 P2.66-6.10 P1
62 P211-100 P1
3400 P24000 P1
235 P2275 47.6 180 2600 1-AM092
P1
T6H29D 3.80 P22.9-2.64 P1
62 P248-158 P1
3400 P23500 P1
235 P2240 75.1 284 2400 1-AM092
P16

T6H20C Subplates & Adapters

Hybrid
 Check Valves
Size Max Flow Max Press. Request
Type Model in/mm gpm L/m psi bar Publication Mounting Options & Notes
3
Direct / Pilot C4V03 /8” 47 180 5000 350 6-EN455/460 Subplate - Threaded Body - Cartridge
C5V08 Operated 3
C4V06 /4” 95 360 5000 350 6-EN455/460 Subplate - Threaded Body - Cartridge
C4V10 11/2” 158 600 5000 350 6-EN455/460 Subplate - Threaded Body - Cartridge
3
C5P06 /4” 24 90 5000 350 6-EN4700 SAE-61 Flange
C5P08 1” 80 300 5000 350 6-EN4700 SAE-61 Flange
C5P10 11/4” 158 600 5000 350 6-EN4700 SAE-61 Flange
3
Direct C5V06 /4” 26 100 3000 210 6-EN465 SAE-61 Flange
Operated C5V08 1” 53 200 3000 210 6-EN465 SAE-61 Flange
R5V12 C5V10 11/4” 106 400 3000 210 6-EN465 SAE-61 Flange
C5V12 11/2” 198 750 3000 210 6-EN465 SAE-61/62 Flange

Stackable Valves
NFPA Max Flow Max Press. Request
Type Model /Cetop gpm L/m psi bar Publication Mounting Options & Notes
Pressure ZDV01 03 21 80 5000 350 8-EN565
Control-Relief ZDV02 05 37 140 4600 315 8-EN575
Pressure ZDR01 03 21 80 5000 350 8-EN565
Control-Reducer ZDR02 05 32 120 4600 315 8-EN575
Flow Control ZRD01 03 21 80 5000 350 8-EN565
Throttle & Check ZRD02 05 42 160 4600 315 8-EN575
Check Valves ZRV01 03 21 80 5000 350 8-EN565
Direct Operated ZRV02 05 26 100 4600 315 8-EN575
Check Valves ZRE01 03 11 40 5000 350 8-EN565
Pilot Operated ZRE02 05 32 120 4600 315 8-EN575
Counterbalance ZNS01 03 16 60 5000 350 8-EN565
VV01 Valves ZNS02 05 32 120 4600 315 8-EN575

Pressure & Proportional Pressure Control Valves

NFPA Max Flow Max Press. Request
Type Model /Cetop gpm L/m psi bar Publication Mounting Options & Notes
Relief * (V) R4( )03 - 24 90 5000 350 3-EN240 Subplate - Threaded Body - Cartridge
Unloader (U) R4( )06 - 80 300 5000 350 3-EN2500 Subplate - Threaded Body - Cartridge
Sequence (S) 3-EN260
4VP01 R4( )10 - 158 600 5000 350 Subplate - Threaded Body - Cartridge
Reducer * (R) 3-EN2700
R5( )06 - 24 90 5000 350 3-EN2850/290 SAE-61 Flange, 2 and 3 port
*Also available
with proportional R5( )08 - 80 300 5000 350 3-EN2850/290 SAE-61 Flange, 2 and 3 port
control. R5( )10 - 158 600 5000 350 3-EN2850/290 SAE-61 Flange, 2 and 3 port
**R5( )12 - 158 600 5000 350 3-EN2850/290 SAE-61/62 Flange, 2 and 3 port
DIN CVC/D08 - 80 300 5000 350 3-EN245 Cover Versions:
Cartridges CVC/D10 - 158 600 5000 350 3-EN245 - with integrated pilot valve
Relief* - vent option for mounting 4D01-Cetop 3
*Also available - option for mounting elect. controlled pro-
with proportional portional relief pilot valve (VP01)
control. - option for mtg. elect. controlled proportional
relief pilot valve w/feedback (R1EP01)
Unloader CUC/D08 - 80 300 5000 350 3-EN255 Cover Versions:
CUC/D10 - 158 600 5000 350 3-EN255 - with integrated pilot valve
- vent option for mounting 4D01-Cetop 3
Remote Control R1E02 - 1 3.8 5000 350 3-EN205 Subplate - Foot - Panel - Cartridge
Proportional
R4V06
Reducer 4RP01 3 3.4 13* 1450 100 3-EN280 Subplate, *at ∆p 50 bar
Proportional R4VP03 5 24 90 5000 350 3-EN230 Subplate or Cartridge
- Relief R4VP06 8 80 300 5000 350 3-EN230 Subplate or Cartridge
R4VP10 10 158 600 5000 350 3-EN230 Subplate or Cartridge
- Pressure 4VP01 3 1.3 5 5000 350 3-EN220 Subplate
VP01 - 1.3 5 5000 350 3-EN220 Stackable
3-Way Vent VV01 - 1 3.8 5000 350 3-EN215 Stackable
**R5( )12 SAE-61 - Max. Pressure 3000 psi / 210 bar
**R5( )12 SAE-62 - Max. Pressure 5000 psi / 350 bar

R5U10

R1E02
Flow & Proportional Flow Control Valves
Size Max Flow Max Press. Request
Type Model in/mm gpm L/m psi bar Publication Mounting Options & Notes
3
2-Way-Flow 2F1C02 /8” 13 50 4000 280 5-EN405 Subplate
Control 2F1C03 3
/4” 29 110 5000 350 5-EN405 Subplate
3
Proportional F5C06 /4” 25 95 3050 210 5-EN420 SAE-61 Flange
Flow Control F5C08 1” 50 190 3050 210 5-EN420 SAE-61 Flange
C1FP10
F5C10 11/4” 100 380 3050 210 5-EN420 SAE-61 Flange
Proportional C1FP05 16 53 200* 5000 350 5-EN4300 Cartridge, *at ∆p 10 bar
Throttle Valve C1FP08 25 106 400* 5000 350 5-EN4300 Cartridge, *at ∆p 10 bar
DIN Cartridge
C1FP10 32 169 640* 5000 350 5-EN4300 Cartridge, *at ∆p 10 bar
C1FP12 40 232 880* 5000 350 5-EN4300 Cartridge, *at ∆p 10 bar
3
Pressure R5A06 /4” - - 5000 350 5-EN420 SAE-61 Flange
Compensators R5A08 1” - - 5000 350 5-EN420 SAE-61 Flange
2-Port
R5A10 11/4” - - 4000 280 5-EN420 SAE-61 Flange
3
Pressure R5P06 /4” - - 5000 350 5-EN420 SAE-61 Flange
Compensators R5P08 1” - - 5000 350 5-EN420 SAE-61 Flange
3-Port A4D01
R5P10 11/4” - - 4000 280 5-EN420 SAE-61 Flange

Directional & Proportional Directional Control Valves

NFPA Max Flow Max Press. Request
Type Model /Cetop gpm L/m psi bar Publication Mounting Options & Notes
Direct A4D01 03 24 90 5000 350 4-AM306 Elect. - Mech. - Manual - Hyd. - Pneumatic
Operated A4D02 05 37 140 4600 315 4-AM3300 Elect. - Mech. - Manual - Hyd. - Pneumatic
A4D03 07 80 300 5000 350 4-AM351 Hydraulic
A4D06 08 185 700 5000 350 4-AM3710 Hydraulic
A3D10 10 211 800 5000 350 4-AM385 Mechanical - Manual - Hydraulic
Pilot A4D03 07 63 240 5000 350 4-AM350 Electrical A4D02
Operated A4D06 08 132 500 5000 350 4-AM3710 Electrical
A3D10 10 211 800 5000 350 4-AM385 Electrical
Proportional 4DP01 03 8* 30* 5000 350 4-EN315 Electrical, *at ∆p 73 ( 5 bar)
4DP02 05 16* 60* 4600 315 4-EN340 Electrical, *at ∆p 73 ( 5 bar)
3DP03/T 07 95* 360* 5000 350 4-EN360/61 Electrical, *at ∆p 725 ( 50 bar)
3DP06/T 08 185* 700* 5000 350 4-EN380/81 Electrical, *at ∆p 725 ( 50 bar)
Pressure SPC01 03 (for 4DP01) 4-EN315 Hydraulic
Compensators SPC02 05 (for 4DP02) 4-EN340 Hydraulic
SPC03 07 (for 3DP03) 4-EN360 Hydraulic
SPC06 08 (for 3DP06) 4-EN380 Hydraulic

Seat Valves - On/Off

Size Max Flow Max Press. Request 3DP06T
Type Model in/mm gpm L/m psi bar Publication Mounting Options & Notes
3
Body type D4S03 /8” 47 180 5000 350 7-EN510 Subplate - Threaded Body
3
D4S06 /4” 95 360 5000 350 7-EN510 Subplate - Threaded Body
D4S10 11/2” 158 600 5000 350 7-EN510 Subplate - Threaded Body
3
2 / 3 Port D5S06 /4” 47 180 5000 350 7-EN520/530 SAE-61 Flange
2 / 3 Port D5S08 1” 95 360 5000 350 7-EN520/530 SAE-61 Flange
2 / 3 Port D5S10 11/4” 158 600 4000 280 7-EN520/530 SAE-61 Flange
3 Port D5S12 11/2” 158 600 3000 210 7-EN530 SAE-61 Flange
Cavity per C1C/D05 16 53 200 5000 350 7-EN505 Cartridge
DIN-24342 C1C/D08 25 119 450 5000 350 7-EN505 Cartridge
C1C/D10 32 198 750 5000 350 7-EN505 Cartridge
C1C/D12 40 330 1250 5000 350 7-EN505 Cartridge
C1C/D16 50 528 2000 5000 350 7-EN505 Cartridge A4D02
C1C/D20 63 792 3000 5000 350 7-EN505 Cartridge
1
Cavity per CAR4 /2” 47 180 5000 350 7-EN515 Cartridge
DENISON Std. CAR2 11/2” 158 600 5000 350 7-EN515 Cartridge

A4D06