SKF SYSTEM 24

Single point automatic lubricator LAGE 125 and LAGE 250

Reliable, reusable lubricator system meets many needs
The LAGE series of the SKF
A A B On/off knob and time setting dial
SYSTEM 24 family are single point
B Enable easy activation and dial setting
electro mechanical driven automatic C C LED status indicators
lubricator systems. Suitable for Helps verify operating status
D Drive cover
a wide range of applications
Easily removable, seals and helps prevent
and operating conditions, the D J ingress of dirt and moisture
E F
units are reliable and flexible in E Electric motor and gearbox
Helps enable constant discharge pressure
operation. Supplied ready to use F Battery pack
straight from the box and ease of
installation makes the units a perfect G G Piston
Special piston shape helps ensure
complement to the comprehensive optimum emptying of lubricator
range of SKF automatic lubricators. H Spindle
Rotates to drive piston,
H enabling lubricant to be dispensed
I I Lubricant canister
Filled with high quality SKF lubricant
J Anti-vacuum membrane
Helps prevent vacuum forming

●● Electro mechanical driven makes the unit ●● Refill sets consisting of a canister filled with ●● Easy activation using a clearly marked dial
highly reliable in operation SKF Grease or Oil and a battery pack help helps minimize setting errors
●● Available in two sizes: 122 ml (LAGE 125) ensure reliable lubricator operation ●● Transparent lubricant container allows visual
and 250 ml (LAGE 250) to suit most bearing ●● Flexible user adjustable dispense settings inspection of dispense rate, whilst electro
lubrication applications of 1, 3, 6, 9 or 12 months for use in many mechanical functions are indicated by simple
●● Remote mounting up to 3 meters (10 ft) for different applications red-green LED indicators.
grease filled units and 5 meters (16 ft) for ●● Ingress protection to IP 65 level allows the ●● UL listed
oil filled units allows lubrication of bearings lubricator to be used in many dusty and wet ●● Wide range of accessories is available
in areas with high ambient temperatures, environments. ●● SKF SYSTEM 24 LAGE series is fully
vibration or hazardous environments ●● Temperature independent dispense rate, featured in SKF DialSet 4.0
●● Available filled with various high quality SKF suitable for use in applications with changing
greases and oils, to suit a wide range of temperatures
bearing applications ●● Unlike gas powered units, a maximum
discharge pressure of 5 bar can be achieved
over the whole lubricant dispensing period

Re-lubrication
Ordering guide
Lubricant Description Product Complete designation
Greases
LGWA 2 Multi-purpose EP type grease Complete unit 125 LAGE 125/WA2
Complete unit 250 LAGE 250/WA2
Refill set 125 LGWA 2/EML125
Refill set 250 LGWA 2/EML250
LGEM 2 High loads, slow rotations Complete unit 125 LAGE 125/EM2
Complete unit 250 LAGE 250/EM2
Refill set 125 LGEM 2/EML125
Refill set 250 LGEM 2/EML250
LGHB 2 High temperature, loads, plain bearing Complete unit 125 LAGE 125/HB2
Complete unit 250 LAGE 250/HB2
Refill set 125 LGHB 2/EML125
Refill set 250 LGHB 2/EML250
LGHP 2 High performance polyurea Complete unit 125 LAGE 125/HP2
Complete unit 250 LAGE 250/HP2
Refill set 125 LGHP 2/EML125
Refill set 250 LGHP 2/EML250
LGFP 2 Food processing industry Complete unit 125 LAGE 125/FP2
Complete unit 250 LAGE 250/FP2
Refill set 125 LGFP 2/EML125
Refill set 250 LGFP 2/EML250

Oils
LHMT 68 Medium temperature oil Complete unit 125 LAGE 125/HMT68
Complete unit 250 LAGE 250/HMT68
Refill set 125 LHMT 68/EML125
Refill set 250 LHMT 68/EML250
LHHT 265 High temperature oil Complete unit 125 LAGE 125/HHT26
Complete unit 250 LAGE 250/HHT26
Refill set 125 LHHT 265/EML12
Refill set 250 LHHT 265/EML25
LHFP 150 Food compatible, NSF H1 approved oil Complete unit 125 LAGE 125/HFP15
Complete unit 250 LAGE 250/HFP15
Refill set 125 LHFP 150/EML12
Refill set 250 LHFP 150/EML25
Technical data
Designations LAGE 125 / LAGE 250
Grease capacity LAGE 125 122 ml (4,1 fl. oz US) UL certification UL listed
LAGE 250 250 ml (8,5 fl. oz US) T code 59°C -
Emptying time User adjustable: Category BAYZ – 92UM
1, 3, 6, 9 and 12 months Lubricant dispensing
equipment for use in
Ambient temperature range 0 °C (-10°C peak ) to 50 °C hazardous locations
(32 °F (14 °F peak) to 122 °F) Class I, Division II,
Maximum operating pressure 5 bar (75 psi) Group A, B, C, D
Drive mechanism Electro mechanical Class II, Division II, Group F &G
Class III
Connection thread R 1/4
Protection class assembled lubricator IP 65
Maximum feed line length with: grease Up to 3 meters (10 ft) *
Battery pack 4,5V 2,7 Ah - Alkaline
oil Up to 5 meters (16 ft)
manganese
LED status indicators operating, purging lubricant,
Recommended storage temperature 20 °C (70 °F)
empty, malfunction
Storage life of lubricator 3 years **
(2 years for LGFP 2 and Oils)
Total weight LAGE 125 635 g (22,5 oz)
LAGE 250 800 g (28,2 oz)

* The maximum feed line length is dependent on ambient temperature, grease type and back pressure created by the application.
** Storage life is 3 years from production date, which is printed on the side of the canister.
The canister and battery pack may be used even at 12 months setting if activated 3 years from production date.
 Ordering details accessories SKF SYSTEM 24
Designation Description Designation Description
LAPA 45 Angle connection 45° LAPN 3/8 Nipple G 1/4 – G 3/8
LAPA 90 Angle connection 90° LAPN 6 Nipple G 1/4 – M6
LAPB 3x4E1 * Brush 30 × 40 mm LAPN 8 Nipple G 1/4 – M8
LAPB 3x7E1 * Brush 30 × 60 mm LAPN 8x1 Nipple G 1/4 – M8 × 1
LAPB 3x10E1 * Brush 30 × 100 mm LAPN 10 Nipple G 1/4 – M10
LAPB 5-16E * Elevator brush, 5 – 16 mm gap LAPN 10x1 Nipple G 1/4 – M10 × 1
LAPB D2 * Brush round Ø 20 mm LAPN 12 Nipple G 1/4 – M12
LAPC 13 Bracket LAPN 12x1.5 Nipple G 1/4 – M12 × 1,5
LAPC 63 Clamp LAPP 63 Support flange
LAPE 35 Extension 35 mm LAPP 63V Support flange with non-return valve
LAPE 50 Extension 50 mm LAPT 1000 Flexible tube, 1 000 mm long, 8 × 6 mm
LAPF F1/4 Tube connection female G 1/4 LAPT 5000 Flexible tube, 5 000 mm long, 8 × 6 mm
LAPF M1/4 Tube connection male G 1/4 LAPV 1/4 Non return valve G 1/4
LAPF M1/8 Tube connection male G 1/8 LAPV 1/8 Non return valve G 1/8
LAPF M3/8 Tube connection male G 3/8
LAGE 1-BAT Battery pack
LAPG 1/4 Grease nipple G 1/4
LAPM 2 Y–connection
* Suitable for use with oil filled SKF SYSTEM 24 LAGE 125 and 250 units only
LAPN 1/8 Nipple G 1/4 – G 1/8
LAPN 1/2 Nipple G 1/4 – G 1/2
LAPN 1/4 Nipple G 1/4 – G 1/4
LAPN 1/4UNF Nipple G 1/4 – 1/4 UNF
90
º
5º
13

LAPA LAPB LAPC

90º
5º
13

LAPE LAPF LAPG LAPM LAPN

LAPN LAPP LAPT LAPV LAGE 1-BAT

® SKF is a registered trademark of the SKF Group

© SKF Group 2009
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written
permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

MP/PDS LAGE EN · October 2009

www.mapro.skf.com · skf.com/mount · skf.com/lubrication