Scribd
Upload
4K views2 pages

MDG0008

Uploaded by

Manoj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
4K views2 pages

MDG0008

Uploaded by

Manoj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
RAIL COACH FACTORY,KAPURTHALA GUIDE LINES FOR MANUFACTURING TOLERANCES ON DIMENSIONS WHERE TOLERANCES ARE NOT SPECIFIED Version No 02 Document No MDGO0O8 Page 1 of 2 Issue Date :2012 2002 1 Fabrications and Rough Machined Surfaces Hon. om on Sue TacHrHED HOUIKAL over SUE 1 FABRICATED 6 8 BU mn fu 6 2 For medium and fine machined surfaces, appropriate tolerances as per IS 2102 (part I) shall apply~ 3 - Regarding thickness of plates, sheets etc. Rolling tolerances as per applicable specifications shall apply. 4 For cold formed sections, tolerances as per clause 6 of IS 811 as appropriate shall apply. 5 Sponge Rubber Packing THICK NESS LENGTH AND WIDTH [DIMESNSION (mm)| TOLERANCE DIMENSION (mm) TOLERANCE (+ OR - ) C+ OR - ) 3.2 & UNDER o.4 m 152 & UNDER 1.6 me 3.2 - 12.7 0.8 am 152° - 457 3.2 am OVER 12.7 1.2 am OVER 457 @.5 PERCENT 6 Document No HDGO088 RAIL COACH FACTORY, KAPURTHALA GUIDE LINES FOR MANUFACTURING TOLERANCES ON DIMENSIONS WHERE TOLERANCES ARE NOT SPECIFIED Page Z of 2 Version No @: Issue Date :2e12 2692 LATEX FOAM RUBBER (CORED) THICK NESS LENGTH AND WIDTH DIMESNSION TOLERANCE DIMENSION TOLERANCE am) (+ OR-) zn (ap) (+ OR ~)on UPTO AND INCLUDING 42, -2 @ TO 152 #5, 72 12.7 ma 152 To 305 IncL | 410, -3 305 TO 610 INCL | +413, -6 ©61@ TO 6914 INCL| +16, -10 FROM 12.7 mm TO 25.4 +3, -2- |0914- 10-1219 INCL] +19, -13 fam INCL j 1219 TO 1524 INCL] +22, -16 t 1524 TO 1829 INCL] +25, -19 OVER 25.4 om 43, -5 1829 & OVER #29, -22 NOTE THIS DOCUMENT REPLACES DOCUMENT NO RCF MH 627.DP, IN OLD DOCUMENTS /DRAWINGS DOCUMENT NO RCF HK 627.DP IS FEATURING. IN ALL SUCH CASES LATEST VERSION OF DOCUMENT NO MDG 9098 HY BE 1 | | | REFERRED. tT ‘APPROVED BY DY -CME/DEY 7 “ROSS (oS 40°

You might also like