Scribd
Upload
122 views1 page

Design of 3 Storey With Roofdeck Reinforced Concrete Building

This document provides information for designing a 3 storey reinforced concrete building with a roof deck. It includes the storey heights, beam and column properties, dead and live loads, and seismic and wind parameters to consider in the design. The dead loads include self-weight of concrete and masonry, floor finishes, roofing, and partitions. Live loads are 1.9 kN/m^2 for floors and roof decks. Seismic design is based on UBC 97 and NSCP 2015 for Zone 4 with an importance factor of 1.0. Wind speed is 250 kph for Exposure B conditions.

Uploaded by

ompoc123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
122 views1 page

Design of 3 Storey With Roofdeck Reinforced Concrete Building

This document provides information for designing a 3 storey reinforced concrete building with a roof deck. It includes the storey heights, beam and column properties, dead and live loads, and seismic and wind parameters to consider in the design. The dead loads include self-weight of concrete and masonry, floor finishes, roofing, and partitions. Live loads are 1.9 kN/m^2 for floors and roof decks. Seismic design is based on UBC 97 and NSCP 2015 for Zone 4 with an importance factor of 1.0. Wind speed is 250 kph for Exposure B conditions.

Uploaded by

ompoc123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF 3 STOREY WITH ROOFDECK REINFORCED CONCRETE BUILDING

STORIES (LEVELS)
Levels Storey Height (m)
Footing to GF 1.5
GF to 2F 3
2F - 3F 3
7.5

PROPERTIES
Beams Columns Slabs fc' fy
2F-RD 250X400 RC 250X400 S100 20.68 Mpa 230 Mpa
TB 200X400

(3000psi) (Gr33)

LOADS
Dead Load
1.) Selfweight
Concrete unit weight = 24 kN/m3

2.) Member Load


150mm CHB 3.11 kN/m per meter height
100mm CHB 2.98 kN/m per meter height

Floor Load 2nd Floor Roof Deck


100mm slab 2.40 2.40
roof framing - -
corrugated roofing sheet - -
Floor finish 1.10 1.10
Ceiling 0.10 0.10
MEP 0.10 0.10
Interior Partition 1.00 1.00
Water Proofing + Impact Factor
Pool Water 1.5m Depth - -
4.70 4.70

Live Load
1.9 kN/m2 Basic Floor Area
1.9 kN/m2 Roof Decks
Seismic Parameters
UBC 97 / NSCP 2015
Zone = 4
Seismic Source Type = A
Importance Factor ( I ) = 1.0 (Standard Occupancy)
R = 8.5 - Special Moment Frame
Structure is located 48.4km from known seismic source
Ct = 0.0731

Wind Parameters
Wind (ASCE 7-10 / NSCP 2015)
Vwind = 250 kph
I = 1.0
Exposure = B (typical residential structure in urban area)

You might also like