Scribd
Upload
271 views

Concrete Pour Card

This document is a concrete pour card for a project at the TMD Plant MeOH/DME project. It provides details of the planned concrete pour including the pour date, volume required, mix design number, design strength, placement and curing methods. It also includes pre-placement and post-placement checklists to verify tasks like formwork, reinforcement, embedded items, finishing and curing are completed. The checklists require sign-off from representatives of the contractor, client and optional inspector.

Uploaded by

John Doe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
271 views

Concrete Pour Card

This document is a concrete pour card for a project at the TMD Plant MeOH/DME project. It provides details of the planned concrete pour including the pour date, volume required, mix design number, design strength, placement and curing methods. It also includes pre-placement and post-placement checklists to verify tasks like formwork, reinforcement, embedded items, finishing and curing are completed. The checklists require sign-off from representatives of the contractor, client and optional inspector.

Uploaded by

John Doe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

SGL-QMS-FORM-002 REV1

SOUTHERN GENERAL LIMITED


CONCRETE POUR CARD
Date: Pour No. SGL-MHI-
Project Name: TMD Plant MeOH/ DME Project Project Number: 533880-C0119
Contractor Name: Southern General Limited Planned Pour Date:
Client Name: Mitsubishi Heavy Industries Ltd Approx. Volume Required: m3
Pour Identification: Pour Location:
Reference Document Number Revision Number Remarks

Mix Design Number: Allowable Slump Range: 80 ± 25mm


2
Design Strength: 25N/mm Cylinder Strength Maximum Aggregate Size: 20mm
Place Method: Hand Pour Allowable Pour Rate: N/A
Curing Method Applying Concure WB Finish: Smooth
Contractor Client
Pre-Placement Checklist
Initials Date Initials Date
Subgrade
Blinding
Formwork
Line and Grade
Reinforcement (Size, Spacing, Lap, Quantity)
Embedded Items
Inside Formwork Cleanup
Anchor Bolts
Piping
Electrical
Miscellaneous Steel
Others (Specify)
Release for Placement
SGL Representative MHI Inspector CGCL Inspector (optional)
Name: DARIUS RAMKARAN Name: Name:
Signature: Signature: Signature:
Date: Date: Date:

Contractor Client
Post Placement Checklist
Initials Date Initials Date
Proper Finish Applied
Proper Curing Method Applied
Line and Grade
Formwork removed and Surface repairs completed
Others (Specify)
Remarks:

SGL Representative MHI Inspector CGCL Inspector (optional)


Name: Name: Name:
Signature: Signature: Signature:
Date: Date: Date:

You might also like