Scribd
Upload
31 views

Parameters L 105.58 M B 27.8 M CB 0.876: A-1 Minimum Section Modulus A-1-1 Still Water Bending Moment

This document contains parameters and calculations to determine the minimum required section modulus for a ship hull. It lists the ship's length, breadth, and block coefficient. It then calculates the still water bending moment and wave induced bending moment based on formulas provided. The total bending moment is the sum of these values. This total bending moment is then divided by the permissible stress to determine the required section modulus of 4,061,802.34 cm3.

Uploaded by

Mikhail Roy Dela Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
31 views

Parameters L 105.58 M B 27.8 M CB 0.876: A-1 Minimum Section Modulus A-1-1 Still Water Bending Moment

This document contains parameters and calculations to determine the minimum required section modulus for a ship hull. It lists the ship's length, breadth, and block coefficient. It then calculates the still water bending moment and wave induced bending moment based on formulas provided. The total bending moment is the sum of these values. This total bending moment is then divided by the permissible stress to determine the required section modulus of 4,061,802.34 cm3.

Uploaded by

Mikhail Roy Dela Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Parameters

L= 105.58 m
B= 27.8 m
Cb = 0.876

A-1 Minimum Section Modulus


A-1-1 Still Water Bending Moment

Ms = Cst x (L)2.5 x B x (Cb+ 0.5)

Where:
L= 105.58 m
B= 27.8 m
Cb = 0.876
Cst = 0.006275671

Ms = Cst x (L)2.5 x B x (Cb+ 0.5) 27496.507913 tonne-m

A-1-2 Wave Induced Bending Moment

Mw = C 2 x L 2 x B x H x K b

Where:
L= 105.58 m
B= 27.8 m
Cb = 0.876
C2 = 0.0224984
Kb = 1.4 – 0.5 x Cb 0.962
H = 0.0172 x L + 3.653 5.468976
Mw = C 2 x L 2 x B x H x K b 36680.971937 tonne-m

A-1-3 Total Bending Moment

MT = M s + M w 64177.479849
fp = 1.5800246914

A-1-4 Section Modulus Requirement

SM = MT / fp 4,061,802.34 cm
3

You might also like