DELTA TESTING &RESEACH LABORATORIES

Master Data Sheet

Job Order No.:- Date: -

Sample Description:-

S. Test Units Test Method Results Requirement Conformity

No. IS 6162(Pt-1):1971
1. Conductor diameter mm IS 6162(Pt-1):1971 3.30 ±0.034
2. Overall diameter mm IS 6162(Pt-1):1971 3.635 Max.
3. Increase in diameter mm IS 6162(Pt-1):1971 0.225 Min.
4. Tensile Strength N/mm² IS 6162(Pt-1):1971 69 – 100
5. Elongation % IS 6162(Pt-1):1971 15 Min.
6. Densityat 20ºC g/mm³ IS 6162(Pt-1):1971 2.703 Min.
7. Conductor Ω/m IS 6162(Pt-1):1971 0.003275 Max.
Resistance
8. Resistivity at 20°C Ω-mm²/m IS 6162(Pt-1):1971 0.0280 Max.
9. Wrapping Test - IS 6162(Pt-1):1971 Shall not crack after
Wrapping 8-8-6 way.
10. Joint Test - IS 6162(Pt-1):1971 All joint shall be welded and
subsquently cold Worked.
11. Free from Defects - IS 6162(Pt-1):1971 Shall be finished clean and
smooth and shall be free
from slivers, spills dust,
crack and other defects.
12. Grade of Paper - IS 6162(Pt-1):1971 Shall be free from metallic
and other Injurious
inclusions.
13. Thickness of Paper mm IS 1060(Pt-1):1966 0.025 – 0.075
Page-1/2

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp
 NATIONAL TESTING LABORATORY PVT. LTD.
Master Data Sheet

Job Order No.:- Date: -

Sample Description:-

S. Test Units Test Method Results Requirement Conformity

No. IS 6162(Pt-1):1971
14. Grade of Covering - IS 6162(Pt-1):1971 Double Paper covered (fine) Yes
15. Width of Paper mm IS 6162(Pt-1):1971 3.00 – 12.00 Yes
16. Arrangement of - IS 6162(Pt-1):1971 Two layers, Both of them Yes
Layer of Paper shall be overlap wound in
the opposite directions.
17. Overlapping % IS 6162(Pt-1):1971 25 Min. Yes
18. Tensile Strength N/mm² IS 1060(Pt-1):1966
i) Longitudinal 55 Min. Yes
Direction
ii) Transverse 20 Min. Yes
Direction
19. Ageing (Bursting % IS 6162(Pt-1):1971 20 Max. Yes
strength)test Appendix-B
20. pH Value of Water IS 1576:1967 6.5 – 8.0 Yes
Extract
21. Conductivity of Micro IS 6162(Pt-1):1971 22 Max. Yes
Water Extract siemens/cm Appendix-D
22. Avg. Oil Absorption mm IS 6162(Pt-1):1971 30 - 60 Yes
(at 95-100ºC for 2hrs.) Appendix-E
23. Ageing in Oil % IS 1060(Pt-1):1966 25 Max. Yes
(at 105°C for 7 days)
24. Electric Strength test - IS 6162(Pt-1):1971 8.5 kV for 10Second Yes

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp

NATIONAL TESTING LABORATORY PVT. LTD.

Master Data Sheet
Job Order No.:- Date: -

Sample Description:-

S. Test Units Test Method Results Requirement Conformity

No. IS 6162(Pt-2):1971
1. Conductor diamesion mm IS 6162(Pt-2):1971
i) Thickness 3.20 ±0.050 Yes
ii) Width 12.40 ± 0.070 Yes
2. Overall dimension mm IS 6162(Pt-2):1971
i)Thickness 3.60 Max. Yes
ii) Width 12.80 Max. Yes
3. Increase in mm IS 6162(Pt-2):1971
dimension
i) Width 0.25 Min. Yes
ii) Thickness 0.25 Min. Yes
4. Tensile Strength N/mm² IS 6162(Pt-1):1971 69 – 100 Yes
5. Elongation % IS 6162(Pt-1):1971 15 Min. Yes
6. Densityat 20ºC g/mm³ IS 6162(Pt-1):1971 2.703 Min. Yes
7. Conductor Ω/m IS 6162(Pt-1):1971 0.000709 Max. Yes
Resistance
8. Resistivity at 20°C Ω-mm²/m IS 6162(Pt-1):1971 0.0282 Max. Yes
9. Wrapping Test - IS 6162(Pt-1):1971 Shall not crack after Yes
Wrapping 8-8-6 way.
10. Joint Test - IS 6162(Pt-1):1971 All joint shall be welded and Yes
subsquently cold Worked.
11. Free from Defects - IS 6162(Pt-1):1971 Shall be finished clean and Yes
smooth and shall be free
from slivers, spills dust,
crack and other defects.
12. Grade of Paper - IS 6162(Pt-1):1971 Shall be free from metallic Yes
and other Injurious
inclusions.
13. Thickness of Paper mm IS 1060(Pt-1):1966 0.025 – 0.13 Yes

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp

NATIONAL TESTING LABORATORY PVT. LTD.

Master Data Sheet
Job Order No.:- Date: -

Sample Description:-
 S. Test Units Test Method Results Requirement Conformity
No. IS 6162(Pt-2):1971
14. Grade of Covering - IS 6162(Pt-1):1971 Double Paper covered (fine) Yes
15. Width of Paper mm IS 6162(Pt-1):1971 15 Max. Yes
16. Arrangement of - IS 6162(Pt-1):1971 Two layers, Both of them Yes
Layer of Paper shall be overlap wound in
the opposite directions.
17. Over lapping % IS 6162(Pt-1):1971 25 Min. Yes
18. Tensile Strength N/mm² IS 1060(Pt-1):1966
i) Longitudinal 55 Min. Yes
Direction
ii) Transverse 20 Min. Yes
Direction
19. Ageing (Bursting % IS 6162(Pt-1):1971 20 Max. Yes
strength)test Appendix-B
20. pH Value of Water IS 1576:1967 6.5 – 8.0 Yes
Extract
21. Conductivity of Micro IS 6162(Pt-1):1971 22 Max. Yes
Water Extract siemens/cm Appendix-C
22. Oil Absorption mm IS 6162(Pt-1):1971 30 - 60 Yes
Appendix-D
23. Ageing in Oil % IS 1060(Pt-1):1966 25 Max. Yes

24. Electric Strength test - IS 6162(Pt-1):1971 10 kV for 10Second Yes

Page-
2/2

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp

NATIONAL TESTING LABORATORY PVT. LTD.

Master Data Sheet
Job Order No.:- Date: -

Sample Description:-
 S. Test Units Test Method Results Requirement Conformity
No. IS 7404(Pt-1):1991
1. Conductor diameter mm IS 7404(Pt-1):1991 3.13 ±0.032 Yes
2. Overall diameter mm IS 7404(Pt-1):1991 3.43 Max. Yes
3. Increase in diameter mm IS 7404(Pt-1):1991 0.225 Min. Yes
4. Tensile Strength N/mm² IS 7404(Pt-1):1991 200 -250 Yes
5. Elongation % IS 7404(Pt-1):1991 32 Min. Yes
6. Densityat 20ºC g/mm³ IS 7404(Pt-1):1991 8.89 Min. Yes
7. Conductor Ω/m IS 7404(Pt-1):1991 0.002240 Max. Yes
Resistance
8. Resistivity at 20°C Ω-mm²/m IS 7404(Pt-1):1991 0.01724 Max. Yes
9. Joint Test - IS 7404(Pt-1):1991 All joint shall be welded and Yes
subsquently cold Worked.
10. Free from Defects - IS 7404(Pt-1):1991 Shall be finished clean and Yes
smooth and shall be free
from slivers, spills dust,
crack and other defects.
11. Grade of Paper - IS 7404(Pt-1):1991 Shall be free from metallic Yes
and other Injurious
inclusions.
12. Thickness of Paper mm IS 7404(Pt-1):1991 0.025 – 0.075 Yes

Page-

Analyst
LAB IN CHARGE
Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp

NATIONAL TESTING LABORATORY PVT. LTD.

Master Data Sheet
Job Order No.:- Date: -

Sample Description:-

S. Test Units Test Method Results Requirement Conformity

No. IS 7404(Pt-1):1991
 13. Grade of Covering - IS 7404(Pt-1):1991 Double Paper covered (fine) Yes
14. Width of Paper mm IS 7404(Pt-1):1991 3.00 – 12.00 Yes
15. Arrangement of - IS 7404(Pt-1):1991 Two layers, Both of them Yes
Layer of Paper shall be overlap wound in
the opposite directions.
16. Overlapping % IS 7404(Pt-1):1991 25 Min. Yes
17. Tensile Strength N/mm² IS 1060(Pt-1):1966
i) Longitudinal 55 Min. Yes
Direction
ii) Transverse 20 Min. Yes
Direction
18. Ageing (Bursting % IS 6162(Pt-1):1971 20 Max. Yes
strength)test Appendix-B
19. pH Value of Water IS 1576:1967 6.5 – 8.0 Yes
Extract
20. Conductivity of Micro IS 6162(Pt-1):1971 22 Max. Yes
Water Extract siemens/cm Appendix-D
21. Avg. Oil Absorption mm IS 6162(Pt-1):1971 25 - 55 Yes
(at 95-100ºC for 2hrs.) Appendix-E
22. Ageing in Oil % IS 1060(Pt-1):1966 25 Max. Yes
(at 105°C for 7 days)
23. Electric Strength test - IS 6162(Pt-1):1971 8.5 kV for 10Second Yes
24. Flexibility and - IS 6162(Pt-1):1971 The great variation in the Yes
adhesives numbers and thickness of
papers applied.

Page-
2/2

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp

NATIONAL TESTING LABORATORY PVT. LTD.

Master Data Sheet
Job Order No.:- Date: -

Sample Description:-
 S. Test Units Test Method Results Requirement Conformity
No. IS 13730(Pt-27):1996
1. Conductor diamesion mm IS 13778:1993
i) Thickness 2.80 ±0.030 Yes
ii) Width 11.90 ± 0.070 Yes
2. Overall diameter mm IS 13778:1993
i)Thickness 3.20 Max. Yes
ii) Width 12.30 Max. Yes
3. Increase in diameter mm IS 13778:1993 .
i) Width 0.25 Min. Yes
ii) Thickness 0.25 Min. Yes
4. Tensile Strength N/mm² IS 13778:1993 200– 250 Yes
5. Elongation % IS 13778:1993 32 Min. Yes
6. Densityat 20ºC g/mm³ IS 13778:1993 8.89 Min. Yes
7. Conductor Ω/m IS 13778:1993 0.0005553 Max. Yes
Resistance
8. Resistivity at 20°C Ω-mm²/m IS 13778:1993 0.01724 Max. Yes
9. Joint Test - IS 13778:1993 All joint shall be welded and Yes
subsquently cold Worked.
10. Free from Defects - IS 13778:1993 Shall be finished clean and Yes
smooth and shall be free
from slivers, spills dust,
crack and other defects.
11. Grade of Paper - IS 13778:1993 Shall be free from metallic Yes
and other Injurious
inclusions.
12. Thickness of Paper mm IS 13778:1993 0.025 – 0.13 Yes
Page-
1/2

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp
 NATIONAL TESTING LABORATORY PVT. LTD.
Master Data Sheet
Job Order No.:- Date: -

Sample Description:-

S. Test Units Test Method Results Requirement Conformity

No. IS 13730(Pt-27):1996
13. Grade of Covering - IS 13778:1993 Double Paper covered (fine) Yes
14. Width of Paper mm IS 13778:1993 15 Max. Yes
15. Arrangement of - IS 13778:1993 Two layers, Both of them Yes
Layer of Paper shall be overlap wound in
the opposite directions.
16. Over lapping % IS 13778:1993 25 Min. Yes
17. Tensile Strength N/mm² IS 1060(Pt-1):1966
i) Longitudinal 55 Min. Yes
Direction
ii) Transverse 20 Min. Yes
Direction
18. Ageing (Bursting % IS 6162(Pt-1):1971 20 Max. Yes
strength)test Appendix-B
19. pH Value of Water IS 1576:1967 6.5 – 8.0 Yes
Extract
20. Conductivity of Micro IS 6162(Pt-1):1971 22 Max. Yes
Water Extract siemens/cm Appendix-C
21. Oil Absorption mm IS 6162(Pt-2):1971 30 - 60 Yes
Appendix-D
22. Ageing in Oil % IS 1060(Pt-1):1966 25 Max. Yes

23. Electric Strength test - IS 13778:1993 10 kV for 10Second Yes

24. Flexibility and - IS 13778:1993 The great variation in the Yes
adhesives numbers and thickness of
papers applied.

Page-2/2

Analyst LAB IN CHARGE

Doc No- NTL/F02 (5.4.7) Rev. 01 Date of Issue 01.03.12 Rev/Amendment 02 Date of Rev./ Amendment 01/09/2016 Control
Pre. By Lab In Charge Issued by Q.M Approved by T.M Page No- 01 of 02 Stamp