Scribd
Upload
62 views1 page

Carbon Steel Ball Valve: Code # 50 (Aksctk)

Uploaded by

thilina lakhitha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Carbon Steel Ball Valve: Code # 50 (Aksctk)

Uploaded by

thilina lakhitha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CARBON STEEL BALL VALVE

One Piece Body • Reduced Port


G/F + PTFE Seats/Seals • Blowout Proof Stem
316 Stainless Steel Trim • Stainless Steel Lever Handle

CARBON STEEL BALL VALVES


CODE # 50 (AKSCTK) STANDARDS
THREADED
END TO END KITZ
THREADED ENDS ASME B1.20.1
WALL THICKNESS KITZ

PRESSURE/TEMPERATURE

150 PSI - SATURATED STEAM TO 366ºF


600 PSI - NON-SHOCK COLD WATER, OIL OR GAS
NOTE: PRESSURE/TEMPERATURE CHART - PAGE BV-38

MATERIAL LIST
NO. NAME OF PART SPECIFICATION
1 BODY (1) CAST STEEL (A216 Gr. WCB)
3 STEM STAINLESS STEEL (A276 TYPE 316)
4 BALL STAINLESS STEEL (A276 TYPE 316)
7 GLAND STAINLESS STEEL (A276 TYPE 316)
8 GLAND PACKING G/F PTFE
9 HANDLE (2) STAINLESS STEEL (A276 TYPE 430)
10 SELF LOCKING NUT CARBON STEEL
16 SPRING WASHER CARBON STEEL
29 INSERT STAINLESS STEEL (A276 TYPE 316
or A351 Gr. CF8M)
30 BALL SEATS G/F PTFE
43 SPRING STAINLESS STEEL (A167 TYPE 304)
47 THRUST WASHER REINFORCED PTFE
NOTES: (1) PHOSPHATING
(2) WITH PLASTIC COVERING

DIMENSIONS - WEIGHTS - QUANTITIES


d2 d H D1 L APPROX. CARTON
SIZE NET WT. QTY
1/4 .18 1.22 2.36 1.54 22 120
3/8 .28 1.42 2.76 1.73 26 120
1/2 .36 1.61 3.35 2.22 51 120
3/4 .49 1.73 3.35 2.32 61 96
1 .63 1.89 3.94 2.80 54 54
11/4 .79 2.13 2.94 3.07 52 32
11/2 .96 2.56 4.92 3.27 47 24
2 1.26 4.92 3.94 3.94 52 16

SPECIFICATION
Approved valve shall have one piece carbon steel
body, blowout proof stem, R-PTFE seats/seals,
stainless steel trim, stainless steel lever handle and
reduced port design. Valves shall be pressure rated
to 150 WSP/600 WOG.
KITZ Code No. 50 (AKSCTK) Threaded Ends

®
10750 CORPORATE DRIVE • STAFFORD, TEXAS BV-31

You might also like