WATER STILLS

DEST-4
standard water stiller with integrated low-water cut-off, continuous
production of high pure water, free of dissolved metals and pyrogens

Specification:
Distillate flow rate approx. 4 l/h
DEST 4 Conductivity of distilled water (20°C) 1 µS/cm
LABORATORY EQUIPMENT

Wattage: 3.000 W
Heater element: Silica heater
Material of glass parts: Borosilicate glass 3.3
Water consumption: approx. 60 l/h
Size: 55 x 15 x 50 cm (lxwxh)
Weight: approx. 4,5 kg

Code Description
BOE 8704000 DEST-4, 230 V

BOECO DEST 4L
vertical water still with stainless steel boiler and borosilicate condenser.
Integrated low-water cut-off, water inlet & flow regulator, continuous
production of high purity distilled water, free of metal ions, salts,
dissolved gases and pyrogenic substances.
With flow regulator to avoid excessive water consumption.

Specification:
Distillate flow rate: approx 4 l/h
Conductivity of distilled water (20°C) 1,5 µS/cm
Heater: 3.000 W
Heater element: Stainless steel (AISI 304)
Material of glass parts: Borosilicate glass 3.3
Safety: Low water cut-off & level switch
Water consumption: approx. 55 l/h
Size: 690 x 280 x 280 mm (hxwxd)
DEST 4L Weight: approx. 6,3 kg

Code Description
BOE 8704200 DEST 4L, 230 V

BOECO DEST 10L

Vertical water still with 3 metalic heaters and a large surface condenser made
of borosilicate glass 3.3. Designed for fully automatic operation, with an out-
put of 10 liters per hour, includes safety features in case of lack of electricity
supply or flow water supply. Automatic operation because of an included
reservoir level control. If the destilled water is supplied to an external reservoir
or flask the level control will unplug the water still DEST 10L if the reservoir is
full and start again if the water level has been reduced in the reservoir.

Specification:
Distillate flow rate: approx 10 l/h
Conductivity of distilled water (20°C): 1,5 µS/cm
Heater: 3 x 2.200 W
Heater element: Stainless steel (AISI 304)
Material of glass parts: Borosilicate glass 3.3
Safety: Low water cut-off & level switch
Water consumption: approx. 1,5 l/min
Size: 36 x 40 x 96 cm (lxwxh)
Weight: approx. 16 kg

DEST 10L Code Description

BOE 8711811 DEST 10L, 230V, single phase
BOE 8711812 DEST 10L, 380V, 3-phase

62 WATER STILLS
BOECO WS 4000 / WS 8000
Stainless steel water still with thermostatic low water cut-off and level switch
which activates the heater if there is enough level of water in the boiler.

Specification: WS 4000 WS 8000

Distillate flow rate: approx 4 l/h approx. 7,5-8 l/h
Cond. of dist water (20°C): approx. 1,5 µS/cm
Heater: 3 KW 6 KW
Cooling water: approx. 60 l/h approx. 84 l/h
Material: Inner part: Stainless steel

LABORATORY EQUIPMENT
Outer part: Stainless steel & powder coating
Size: (h x w x d) 435x370x220mm 635x370x260mm
Switch: Main power with pilot lamp
Sealing: Silicone gasket
Safety: Low water level & over heating cut-off

Code Description
BOE 8703600 WS 4000, 230 V
BOE 8703601 WS 4000, 110 V BOECO WS 4000 / WS 8000
BOE 8707500 WS 8000, 230 V

BOECO DEST TANK 4000 / 8000

Stainless steel water still for automatic and continuous operation with built-in
8/16 l storage tank. For bench and wall mounting. Supplied with wall
mounting bracket. Excellent quality of distillation. An electronic level switch
switches the still off when the storage tank is full and restarts it automatically
when destilled water is withdrawn. Dispenser Tap of distilled water.
With flow regulator to avoid excessive water consumption.

Specification: TANK 4000 TANK 8000

Distillate flow rate: approx. 4 l/h approx. 8 l/h
Water tank capacity: 8 l 16 l
Cond. of dist water (20°C): approx 1,5 µS/cm
Power: 3.000 W 6.000 W
Cooling water: approx. 55 l/h approx 80 l/h
Material: Inner part: Stainless steel
Outer part: Galvanized steel & powder coating
Switch: Main power with pilot lamp
Safety: Low water level & over heating cut-off
Size (wxdxh): 620 x 330 x 460 mm 720 x 350 x 700
Weight: approx. 24 kg approx. 36 kg
BOECO DEST TANK 4000 / 8000
Code Description
BOE 8704500 DEST TANK 4000, 230 V
BOE 8704501 DEST TANK 4000, 115 V
BOE 8708000 DEST TANK 8000, 230 V

PRESSURELESS DEIONIZER DS 450

pressureless Ion exchanger in disposable cartridges of synthetic material.
Excellently suited for medical practices and small laboratories requiring up to 10
litres a day. Supplied with conductivity meter, wall mount and a set of hoses.

Specification:
Flow rate: 50 l/h
Capacity at 10° GSG: 425 l
Quality: 0,1 - 20 µS/cm
Temperature max: 30°C
Material Polyethylene
Size (h x diam.): 600 x 100 mm (incl. cond. meter)
Weight: 3 kg

Code Description
BOE 11042506 Deionizer DS 450, 230 V, 50-60 Hz
BOE 11042507 Deionizer DS 450, 110 V, 60 Hz
BOE 11042706 Set of two replacement cartridges

WATER STILLS 63
 BOECO BIDEST 4
is our Bidistiller designed to work automatically with a production of 4 liters
per hour, includes several safety systems to work continuously.

A Produces distilled water for the most common applications in the

laboratory.
A Boiler and Condenser are made of borosilicate glass 3.3. The heaters
are sheated with quartz glass. This is ideal for producing high quality
water, free of metal ions and pyrogens, with a conductivity 1-2 µS / cm.
LABORATORY EQUIPMENT

A Incorporates several security systems for automatic operation: presostat,

electrovalve and level sensor.
A Cooling water outlet by rubber tube. The condensed water not flowing
through the cooling water outlet.
A Energy saving through distillation of preheated cooling water.
A Distillation process visible through the front screen.
A The main switch and monitor drivers are on the front of the unit.
A Control of water level automatic cut off power in case of lack of water.
A Output of the distillate on the side of the unit.
A Output of carbon dioxide through hole of the top of condensers
A Suitable for wall mounting.

Safety systems

Preostat
Safety thermostat protects still in the event of water supply failure.

Electrovalve
It cuts water and electrical supply to avoid useless expenses of water
and electricity.
It returns to open water inlet if the electrical supply is enough to let the water
still to work properly.

Level device
Device to fill a container without worrying when it finished. It cuts water and
electrical supply to avoid useless expenses of water and electricity.

Specification:
Output: approx. 4 l/h
Conductivity of distilled
water (20°C): 1-2 µS/cm
pH: Depends on tap water inlet 5,5-7
Heater: 2 x 3.000 W
Heater element: Quartz sheated heater
Material of glass parts: Borosilicate glass 3.3
Water consumption: approx. 1,2 l/min
Size: 70 x 36 x 47 cm (lxwxh)
Weight: approx. 23 kg

Code Description
BOE 8700410 BIDEST 4, 230V, 50/60 Hz, single phase

Note on the water output:

Depends directly on the quality of water supply and other environmental fac-
tors, maybe type III (according to ASTM). As distillates are open to the atmo-
sphere before measurements can be made, the value of conductivity is really
much less (down to 10 times) than it is really measured. Any ultra pure
water in contact with the atmosphere has a conductivity of 1-2 µS/cm and a
pH of 5, due to the small amount of CO2 (0.05 ppm) from the atmosphere.

64 WATER STILLS