Servo solenoid valves with RE 29032/01.

05
Replaces: 09.03
1/10

electrical position feedback

(Lvdt DC/DC ±10 V)

Type 4WRPH 10

Size 10
Unit series 2X
Maximum working pressure P, A, B 315 bar, T 250 bar
Nominal flow rate 50...100 l/min (∆p 70 bar)

List of contents Features

Contents Page – Directly operated servo solenoid valve NG10, with control
Features 1 piston and sleeve in servo quality

Ordering data and scope of delivery 2 – Actuated on one side, 4/4 fail-safe position when switched off

Preferred types 2 – Control solenoid with integral position feedback and

electronics for position transducer (Lvdt DC/DC)
Function, sectional diagram 3
– Suitable for electrohydraulic controllers in production and
Symbols 3 testing systems
Technical data 4 – For subplate attachment, mounting hole configuration to
Valve with external trigger electronics 5 and 6 ISO 4401-05-04-0-94
Performance curves 7 and 8 – Subplates as per catalogue section RE 45055
(order separately)
Unit dimensions 9
– Line sockets to DIN 43560-AM2
Solenoid 2P+PE/M16 x 1.5, position transducer 4P/Pg7
in scope of delivery, see catalogue section RE 08008
– External trigger electronics (order separately)

Electric amplifier for standard curve “L”

0 811 405 061, see catalogue section RE 30041

Electric amplifier for non-linear curve “P”
40 % – 0 811 405 067, see catalogue section RE 30040

Variants on request
– For standard applications
– Special symbols for plastic injection-moulding machines
– Sturdy “ruggedized” version for applications up to 40 g,
valve with metal cap and central plug (7P).
2/10 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Ordering data and scope of delivery

4WRP H 10 B – 2X / G24 Z4/ M *

For external Further information

trigger electronics = no desig. in plain text
Control piston/sleeve =H M= NBR seals,
Size 10 = 10 suitable for mineral oils
(HL, HLP) to DIN 51524
Symbols AB Electrical connection
4/4-way version a 0 b Z4 = with line socket, with plug to
PT DIN 43560-AM2
= C3, C5 Line socket included in scope of delivery
Voltage supply of trigger electronics
= C4, C1 G24 = +24 V DC
With symbols C5 and C1: 2X = Unit series 20 to 29
P
A: qv B
T: qv/2 (installation and connection dimensions unchanged)
P
B: qv/2 A
T: qv Flow characteristic
Side of inductive position transducer L= Linear
AB P= Non-linear curve
a 0 b Nominal flow rate at 70 bar valve pressure difference
PT (Standard) = B (35 bar/metering notch)
Size 10
150 = 150 l/min
100 = 100 l/min

Preferred types (available at short notice)

Type 4WRPH 10 Material No. Type 4WRPH 10 Material No.

C3/C5 C1/C4
4WRPH 10 C3B50L –2X/G24Z4 / M 0 811 404 058 4WRPH 10 C4B50L –2X/G24Z4 / M 0 811 404 060
4WRPH 10 C3B100L –2X/G24Z4 / M 0 811 404 059 4WRPH 10 C4B100L –2X/G24Z4 / M 0 811 404 061
4WRPH 10 C5B100L –2X/G24Z4 / M 0 811 404 077 4WRPH 10 C1B100L –2X/G24Z4 / M 0 811 404 076
4WRPH 10 C3B50P –2X/G24Z4 / M 0 811 404 062 4WRPH 10 C4B50P –2X/G24Z4 / M 0 811 404 064
4WRPH 10 C3B100P –2X/G24Z4 / M 0 811 404 063 4WRPH 10 C4B100P –2X/G24Z4 / M 0 811 404 065
4WRPH 10 C5B100P –2X/G24Z4 / M 0 811 404 079 4WRPH 10 C1B50P –2X/G24Z4 / M 0 811 404 067
4WRPH 10 C1B100P –2X/G24Z4 / M 0 811 404 078
RE 29032/01.05 Type 4WRPH 10 Industrial Hydraulics Bosch Rexroth AG 3/10

Function, sectional diagram

Servo solenoid valve 4WRPH 10

Control solenoid

Position transducer
(Lvdt DC/DC)

Control solenoid with position transducer

Valve body

Symbols
AB
Linear p: kink 40 %
a 0 b
PT

C3, C5

C4, C1

C3, C4, C5, C1

Accessories, not included in scope of delivery

(4 x) f M6 x 40 DIN 912–10.9 Fastening screws 2 910 151 209
VT-VRRA1-537-20 / V0, see RE 30041 0 811 405 061
VT-VRRA1-537-20 / V0 / K40-AGC, see RE 30040 0 811 405 067

Line sockets 2P+PE (M16 x 1.5) and 4P (Pg7)

included in scope of delivery,
2P+PE 4P see also RE 08008
Application
– Valve amplifier with pressure compensator (p/Q), see RE 30058.

Testing and service equipment

– Test box type VT-PE-TB2, see RE 30064.

– Test adapter type VT-PA-3, see RE 30070.
4/10 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Technical data
General
Construction Spool type valve, operated directly, with steel sleeve
Actuation Proportional solenoid with position control, external amplifier
Type of mounting Subplate, mounting hole configuration NG10 (ISO 4401-05-04-0-94)
Installation position Optional
Ambient temperature range °C –20 … +50
Weight kg 6.8
Vibration resistance, test condition Max. 25 g, shaken in 3 dimensions (24 h)

Hydraulic (measured with HLP 46, ϑoil = 40 °C ±5 °C)

Pressure fluid Hydraulic oil to DIN 51524 … 535, other fluids after prior consultation
Viscosity range recommended mm2/s 20 … 100
max. permitted mm2/s 10 … 800
Pressure fluid temperature range °C –20 … +80
Maximum permissible degree of Class 18/16/13 1)
contamination of pressure fluid
Purity class to ISO 4406 (c)
Flow direction See symbol
Nominal flow at l/min 50 50 100 100
∆p = 35 bar per notch 2) (1:1) (2:1) (1:1) (2:1)
Max. working pressure bar Port P, A, B: 315
Max. pressure bar Port T: 250
Operating limits at ∆p bar 315 315 160 160
Pressure drop at valve
qVnom: > qN valves bar 250 250 100 100

Leakage cm3/min < 1200 < 1200 < 1500 < 1000
at 100 bar
cm3/min < 600 < 500 < 600 < 600

Electrical
Cyclic duration factor % 100
Power supply 24 Vnom (external amplifier)
Degree of protection IP 65 to DIN 40050
Solenoid connector Connector DIN 43650/ISO 4400 M16 x 1.5 (2P+PE)
Position transducer connector Connector Pg7 (4P)
Max. solenoid current A 3.7
Coil resistance R20 Ω 2.4
Max. power consumption at 100 % VA 60
load and operational temperature
Position transducer Supply: +15 V/35 mA Signal: 0...±10 V (RL
10 kΩ)
DC/DC technology Supply: –15 V/25 mA

Static/Dynamic
Hysteresis %  0.2
Manufacturing tolerance for qmax. %  10
Response time for signal change ms  25
0 … 100 %
Thermal drift Zero point displacement 1 % at ∆T = 40 °C
1) The purity classes stated for the components must be complied with in hydraulic systems. Effective filtration prevents problems and
also extends the service life of components. For a selection of filters, see catalogue sections RE 50070, RE 50076 and RE 50081.
2) Durchfluss bei anderem ∆p
2) Flow rate at a different ∆p


qx = qnom ·
∆px
35
RE 29032/01.05 Type 4WRPH 10 Industrial Hydraulics Bosch Rexroth AG 5/10

Valve with external trigger electronics (standard linear curve: L)

Block diagram/pin assignment

Versions of trigger electronics:

– With non-linear curve and surface
area compensation, see RE 30040
– With integrated p/Q compensator,
see RE 30058
6/10 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Valve with external trigger electronics (standard non-linear curve: P)

Block diagram/pin assignment

Daughter card

Versions of trigger electronics:

– With standard linear curve,
see RE 30041
– With integrated p/Q compensator,
see RE 30058
RE 29032/01.05 Type 4WRPH 10 Industrial Hydraulics Bosch Rexroth AG 7/10

Performance curves (measured with HLP 46, ϑoil = 40 °C ±5 °C)

Flow rate/Signal function Q = f (UE)

L: Linear L: (linear) 2:1

P: (kink 40 %)** P: (kink 40 %) 2:1**

**Fail-safe when enabling is not released.

**QN-kink = 10 % QN.

Fail-safe position
Leakage at 100 bar P–A 50 cm3/min
P–B 70 cm3/min

Flow at ∆p = 35 bar A–T 10 … 100 l/min

qN 50/100 l/min B–T 10 … 25 l/min

Leakage at 100 bar P–A 50 cm3/min

P–B 70 cm3/min
A–T 70 cm3/min
B–T 50 cm3/min

Fail-safe p = 100 bar → 12 ms Enable off

•
p = 100 bar → 16 ms
8/10 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Performance curves (measured with HLP 46, ϑoil = 40 °C ±5 °C)

Pressure gain

Bode diagram
RE 29032/01.05 Type 4WRPH 10 Industrial Hydraulics Bosch Rexroth AG 9/10

Unit dimensions (nominal dimensions in mm)

Required surface quality

of mating component

Mounting hole configuration: NG10

(ISO 4401-05-04-0-94)
For subplates, see catalogue section
RE 45055

1)Deviates from standard

2) Thread depth: ** 5/3 – NG10
Ferrous metal 1.5 x Ø* R = P2
Non-ferrous 2 x Ø
* (NG10 min. 10.5 mm)

P A T B F1 F2 F3 F4 R
X 27 16.7 3.2 37.3 0 54 54 0 50.8
Y 6.3 21.4 32.5 21.4 0 0 46 46 32.5

10.5 1) 10.5 1) 10.5 1) 10.5 1) M6 2) M6 2) M6 2) M6 2) 10.5 1)
10/10 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Notes

Bosch Rexroth AG © Bosch Rexroth AG reserves all rights, including industrial property rights.
Industrial Hydraulics We reserve all rights of disposal, such as copying and passing on to third
Zum Eisengießer 1 parties.
D-97816 Lohr am Main, Germany The data specified above only serve to describe the product. No statements
Telefon +49 (0) 93 52 / 18-0 concerning a certain condition or suitability for a certain application can be
derived from our information. The given information does not release the user
Telefax +49 (0) 93 52 / 18-23 58
from the obligation of own judgement and verification. It must be remembered
[email protected]
that our products are subject to a natural process of wear and aging.
www.boschrexroth.de
RE 29032/01.05 Type 4WRPH 10 Industrial Hydraulics Bosch Rexroth AG

Notes

Bosch Rexroth AG © Bosch Rexroth AG reserves all rights, including industrial property rights.
Industrial Hydraulics We reserve all rights of disposal, such as copying and passing on to third
Zum Eisengießer 1 parties.
D-97816 Lohr am Main, Germany The data specified above only serve to describe the product. No statements
Telefon +49 (0) 93 52 / 18-0 concerning a certain condition or suitability for a certain application can be
derived from our information. The given information does not release the user
Telefax +49 (0) 93 52 / 18-23 58
from the obligation of own judgement and verification. It must be remembered
[email protected]
that our products are subject to a natural process of wear and aging.
www.boschrexroth.de
 Bosch Rexroth AG Industrial Hydraulics Type 4WRPH 10 RE 29032/01.05

Notes

Bosch Rexroth AG © Bosch Rexroth AG reserves all rights, including industrial property rights.
Industrial Hydraulics We reserve all rights of disposal, such as copying and passing on to third
Zum Eisengießer 1 parties.
D-97816 Lohr am Main, Germany The data specified above only serve to describe the product. No statements
Telefon +49 (0) 93 52 / 18-0 concerning a certain condition or suitability for a certain application can be
derived from our information. The given information does not release the user
Telefax +49 (0) 93 52 / 18-23 58
from the obligation of own judgement and verification. It must be remembered
[email protected]
that our products are subject to a natural process of wear and aging.
www.boschrexroth.de