Design Closed Loop Fan System With PID Controller and With Feedforward Controller - Automation & Control Engineering Forum
Design Closed Loop Fan System With PID Controller and With Feedforward Controller - Automation & Control Engineering Forum
P R O C E S
S CONTROL
Design closed loop fan system with PID controller and with feedforward controller
Thread Starter #1
ctoren
Monday at 6:53 AM
I want to design a control circuit where I can adjust the motor speed according to the room temperature. So a
closed loop fan system. I want to design this process using feedforward control. I also want to design this
process using a PID controller. How can I design these systems? I need to create a block diagram that includes
both temperature and speed and design it accordingly. But I don't know how to use speed and temperature in
the same block diagram. I will be happy if you can help me.
Like Reply
pnachtwey #2
P Monday at 8:49 PM
Feed forward control shouldn't be necessary because the PID will react more than fast enough.
Like Reply
Thread Starter #3
ctoren
Today at 8:27 AM
I am a student of electrical electronics engineering. I haven't taken a course in control and automation yet. I
have such an internship homework, although I have no knowledge. I have to design any system with a
feedforward controller first and then with a PID controller. And I have to compare the results. I have no idea
about these subjects since I only took electrical lessons so far. If you can help, I can try and complete it.
Like Reply
Y O U M AY ALSO L IK E
Networking Military/Aerospace
Sensors Utilities
© EETech Media, LLC. All rights reserved Privacy Policy · User Agreement