E M C C o m p o n e n t s

Common mode filters Cl

Br Pb
Automotive signal line (for power train/safety) REACH Halogen Lead
RoHS SVHC-Free Free Free
ACT series

AEC-Q200

ACT1210G type
FEATURES
Common mode filters for automotive Ethernet 1000BASE-T1, compatible with an operating temperature range of –40 to +125°C.
This product is equivalent to the conventional product (ACT1210L-201) compatible with 100BASE-T1.
This product achieves high S-parameter while realizing high reliability by metallizing terminals and laser welding using a proprietary
method.
Operating temperature range: –40 to +125°C
OPEN ALLIANCE 1000BASE-T1 response
Compliant with AEC-Q200

APPLICATION
Ethernet system.

PART NUMBER CONSTRUCTION

ACT1210G - 800 - 2P - TL 05
Inductance(typ.)
Series • type name Number of lines Packaging style Internal code
(µH)

CHARACTERISTICS SPECIFICATION TABLE

Common mode inductance DC resistance Insulation Rated current Rated voltage Part No.
[100kHz] resistance

(µH) Tolerance ( )max. (M )min. (mA)max. (V)max.

80 +50/–30% 2.4 10 70 80 ACT1210G-800-2P-TL05

Derating
80

60
Rated current (mA)

40

20

0
0 25 50 75 100 125
Ambient temperature(°C)

Measurement equipment
Measurement item Product No. Manufacturer
Common mode inductance 4294A Keysight Technologies
DC resistance 4338A Keysight Technologies
Insulation resistance 4339A Keysight Technologies
＊ Equivalent measurement equipment may be used.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4)
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190924
cmf_automotive_signal_act1210g_en.fm
 E M C C o m p o n e n t s

ACT1210G type
Sdd21 Scc21

0 0

Sdd21
–1 OPEN ALLIANCE –10
Sdd21 (dB)

Scc21 (dB)
–2 –20

–3 –30

–4 –40 OPEN ALLIANCE

Scc21

–5 –50
10 100 1000 10 100 1000
Frequency (MHz) Frequency (MHz)

Sdd11, Sdd22 Ssd21, Ssd12

0 0

–10 –20
Sdd11, Sdd22 (dB)

Ssd21, Ssd12 (dB)

Sdd11
–20 –40 Ssd12
OPEN ALLIANCE

–30 Sdd22 –60 OPEN ALLIANCE

Ssd21
–40 –80

–50 –100
10 100 1000 10 100 1000
Frequency (MHz) Frequency (MHz)

Measurement equipment
Product No. Manufacturer
E5071C Keysight Technologies
＊ Equivalent measurement equipment may be used.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4)
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190924
cmf_automotive_signal_act1210g_en.fm
 E M C C o m p o n e n t s

ACT1210G type
SHAPE & DIMENSIONS PACKAGING STYLE
3.9max. REEL DIMENSIONS
2.0±0.5 2 typ.
1 4
2.5±0.2

2 3

ø100±1
2.5max.

1.0

0.6 0.6
ø13.0±0.2 13.5±0.5
3.2±0.2
0.5
4x ø21.0±0.8 17.5±1
0.1 CZ
ø330±2
Dimensions in mm Dimensions in mm

TAPE DIMENSIONS
RECOMMENDED LAND PATTERN

5.5±0.05
1.75±0.1
Sprocket
0.35±0.1 2±0.05 4±0.1
hole 1.5 +0.1
–0
0.4
1.6

12+0.3/–0.1
2.0
4.1
B

Dimensions in mm
K A Cavity
4±0.1
CIRCUIT DIAGRAM Dimensions in mm

1 4
Type A B K
2 3 ACT1210G 2.85±0.1 4.2±0.1 2.7±0.1

• No polarity
PACKAGE QUANTITY
Package quantity 6,000 pcs/reel
RECOMMENDED REFLOW PROFILE

Preheating Soldering Natural TEMPERATURE RANGE, INDIVIDUAL WEIGHT

cooling Operating Individual
Peak temperature range weight
245°C –40 to +125°C 0.075 g

230°C 230°C
Temperature

180°C
5s
150°C

60 to 120s 40s max.

Time

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4)
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190924
cmf_automotive_signal_act1210g_en.fm
 E M C C o m p o n e n t s

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.

REMINDERS

The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).

Before soldering, be sure to preheat components.

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.

Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.

When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.

Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.

Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.

Use a wrist band to discharge static electricity in your body through the grounding wire.

Do not expose the products to magnets or magnetic fields.

Do not use for a purpose outside of the contents regulated in the delivery specifications.

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.

(1) Aerospace/aviation equipment (8) Public information-processing equipment

(2) Transportation equipment (electric trains, ships, etc.) (9) Military equipment
(3) Medical equipment (10) Electric heating apparatus, burning equipment
(4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment
(5) Atomic energy-related equipment   (12) Safety equipment
(6) Seabed equipment (13) Other applications that are not considered general-purpose
(7) Transportation control equipment applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4)
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190924
cmf_automotive_signal_act1210g_en.fm