Conventional Fire Alarm Control Panel SFP 512: Product Features
Conventional Fire Alarm Control Panel SFP 512: Product Features
Product features
• 4 Zones Conventional Fire Alarm Control Panel
• Expandable to max. 12 zones
• Complies with EN 54-2 and EN 54-4
• In different languages available
Extension modules
• 4 Zone Detection Module
• 1 Zone Extinguishing Module (EN 12094-1)
• 4 Relay Output Module (5A/230 V)
Description The SFP 512 fire alarm control panel is able to run
The SFP 512 is a microprocessor controlled
Securiton’s new conventional fire alarm control Securiton’s conventional detectors. Each line can
compact modular control unit for fire detection
panel SFP 512 is designed for small installations monitor up to 32 conventional detectors per line.
systems. Easy to use and to install, this panel
of fire detection systems. The SFP 512 fire alarm In case of fire alarm, the 1st and 2nd alarm can be
represents one of the best solutions
control panel complies with the EN 54-2, EN 54-4, distinguished within one detection zone and sepa-
to detect a fire in small installations.
and EN 12094-1 standards. rately indicated. The four relay output module can
The basic unit features four conventional detection be used to activate or deactivate power signals
lines and a full fire alarm control panel functional- with up to 230 V/5A.
ity. The detection zones are expanded to eight or The SFP 512 fire alarm control panel is available
twelve zones, by connecting one or two additional with different front panel operation languages. The
four-zone detection module to the basic SFP 512 technical documentation is included on a CD-ROM
unit. Alternatively, the SFP 512 can drive one extin- in various languages.
guishing zone with a maximum of eight detection
zones at the same time.
Line 1 SFP-4Z
(Optional)
Line 2
4 Zone
Line 3 Extension Module
Line 4
Fire Alarm
Line 1 SFP 512
Open Collector Output 1
Line 2 SFP-4R
Open Collector Output 2 (Optional)
Line 3 Open Collector Output 3
Basic Unit Relay Card
Line 4 (4 Zones) Open Collector Output 4
Stop 1 Zone
Extinguishing Module
Evacuation
Low Pressure (Gas loss)
Technical data SFP 512
Dimensions SFP 512
Housing dimensions (W × H × D) 370 mm × 300 mm × 118 mm
Weight 2 kg (without batteries) 370 mm
Protection class IP 31
Ambient operating temperature –10 °C to +50 °C
Mains voltage and consumption 230 VAC , 50 – 60 Hz, < 75 W
Compliance EN 54-2 and EN 54-4
300 mm
Number of detector lines 4/8/12 Zona
Allarme
Guasto/Prova/
Fuori Servizio
Zona
Allarme
Guasto/
Prova/
In tensione
Allarme Incendio
Guasto
Fuori Servizio
Sirene
Guasto
Attive
Zona
Allarme
Guasto/
Prova/
Scarica in corso
Allarme
Evacuazione
Fuori Servizio Fuori Servizio Prova/Off
On/Off Scarica in corso
Allarme Allarme
A
-
B
+
On/Off
Allarme Modo Automatico Off