…Clearly a Better Value

http://www.aandd.jp
 Contents
Load Cell Terminology 3

Single Point 4
LCB03/04 Series 5
LCB05 Series 6
LC-4001 7
LC-4101 Series 8
LC-4102 Series 9
LC-4103 Series 10
LC-4204 Series 11
LCB22 Series 12

Beam Type 13
LCM13 Series 14
LCM13-M Series 15
LCM19 Series 16
LCM19-M Series 17
LC-4221 Series 18
LC-5206 Series 19
LC-5223 Series 20
LBP Series 21

Tension Type 22
LC-1205 Series 23
LC-1216 Series 24
LCS15 Series 25

Compression Type 26
LCC07 Series 27
LCC11/N Series 28
LCC12 Series 29
LC2224 Series 30
CP/TP Series 31
C2F1/C2Z1/C2X1 Series 32
CMX/CM Series 33
TM/UM Series 34

Button Load Cell

LCC21 Series 35
LCCA21 Series 36

Flameproof Type 37
LCB01/02/06 Series 38
LCM17/LCM17-M Series 39

Flameproof Type Equipment 40

Weighing Platform 41

Equipment 42

Accessories 44

2
Load Cell Terminology
Each country has its own standard for the performance and quality of load cells.
In Japan, there is no standard stipulated uniquely for load cells, although JIS
(Load Cell - Test Method JIS B7602) and JMIF (Japan Measuring Instruments
Federation) prescribe methods for performance tests.
Meanwhile, the OIML (International Organization of Legal Metrology) sets the
international recommendation titled “Metrological Regulation for Load Cells,”
with which each member country tries to make their local regulation consistent.
The terms described below are commonly used by the OIML and its member
countries.

Rated Capacity (RC)

The maximum load that a load cell can measure while meeting its specifications.
Rated Output (RO)
The difference when there is no load and when there is a load of rated capacity. It is
generally expressed in output per excitation voltage (mV/V). Alternatively called
“Span.”
Safe load limit
The maximum load that can be applied beyond the rated capacity without causing
any permanent damage. Expressed as a percentage of rated capacity.
Compensated temperature range
The temperature range within which the rated output and the zero balance are
compensated to meet the specifications.
Temperature effect on zero balance
Drifting of the zero balance caused by changes in the ambient temperature.
Expressed as a percentage of rated output.
Temperature effect on rated output
Drifting of the rated output caused by changes in the ambient temperature.
Nonlinearity
The maximum deviation in output from the linear calibration Output
curve linking the zero balance and the rated output, which is
measured only when the load increases. Expressed as a
percentage of rated output.
Hysteresis error
The maximum difference in output between when the load
increases and when the load decreases.
Hysteresis
Combined error Combined
The maximum deviation of output from the linear calibration Nonlinearity error
curve linking the zero balance and the rated output, including
when the load increases and decreases.
Load
Recommended/maximum excitation voltage
The voltage applied to the input terminals of load cell.

Zero balance
The electrical output when the rated excitation voltage is applied without any load
on the cell. Generally expressed as a percentage of rated output.
Input terminal resistance
Measured while the output terminals are open, with no load on the cell.
Output terminal resistance
Measured while the input terminals are open, with no load on the cell.

Insulation resistance
The direct current resistance between the load cell unit and its circuit.

3
 Single Point
Single-point load cells are ideal to be used alone and
for relatively small loading.
They are already adjusted to correct four-corner errors.

Example Applications
●Electronic balances
●Desktop scales
●Small/medium-sized platform scales
●Conveyer scales, etc.

Example of Installation
The LCB04
Corner point
200(MAX)

Platform Platform spacer Corner stopper

Base
200(MAX)

Corner line
Platform of platform Corner stopper

Unit = mm
200(MAX) 200(MAX)

4
 Single Point

LCB03/04 Series
Single-point Aluminum Load Cell

Model No. Capacity

LCB03K003M 3.059kg (30N)
LCB03K006M 6.118kg (60N)
LCB03K010M 10.20kg (100N)
LCB03K015M 15.30kg (150N)
LCB03 Series LCB03K020M 20.39kg (200N)
LCB03K025L 25.49kg (250N)
LCB03K030L 30.59kg (300N)
LCB03K035L 35.69kg (350N)
LCB04 Series LCB03K060L 61.18kg (600N)
LCB04K060M 61.18kg (600N)
LCB04K100M 102.0kg (1kN)
LCB04K150L 153.0kg (1.5kN)
LCB04K250L 254.9kg (2.5kN)

LCB03M/L Series
Unit = mm Specifications
130 CABLE COLOR CODE
12 106 12 4-M6 RED EXC+ Rated output 2mV/V±10%
WHITE EXC–
GREEN SIG+
Safe load limit 150% of R.C.
BLUE SIG–
YELLOW SHIELD
Combined error 0.02% of R.O.
15 30
(40) Recommended excitation voltage DC5 to 12V
(40) : L Series Maximum excitation voltage DC15V
25 80 25
Zero balance ±5% of R.O.
Input terminal resistance 420±30Ω
22 Output terminal resistance 350±5Ω
Net Weight : 0.23kg Insulation resistance 2000MΩ/DC50V(B/E)
(L Series : 0.3kg)
LCB04M Series Compensated temperature range –10ºC to 40ºC
150
6 18 102 18 6 M6 34mm deep Temperature effect on
Zero balance 0.023% of R.O./10ºC
Span 0.014% of Load/10ºC Typ.
40

Cable diameter/length ø3.5/0.4m (LCB03)

18
18

ø3.5/1.5m (LCB04)
4-M6 16mm deep 2-M6 16mm deep Maximum platform size 300✕300mm (LCB03)
30
400✕400mm (LCB04)
Dustproof/waterproof IP54
34

30
Net Weight : 0.5kg

LCB04L Series
150
6 20 98 20 6 4-M8 16mm deep
20

40
20

4-M8 16mm deep

32
34

32
Net Weight : 0.5kg

5
Single Point

LCB05 Series
Hermetically Sealed Single-point Stainless Steel Load Cell
Ideal for measurements in harsh environments

Model No. Capacity

LCB05K030 30.59kg (300N)
LCB05K060 61.18kg (600N)
LCB05K150 153.0kg (1.5kN)

Specifications
Rated output 2mV/V+15% –0%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±5% of R.O.
Input terminal resistance Approximately 390Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Unit = mm CABLE COLOR CODE Temperature effect on
10 150 RED EXC +
LCB05K030/060 Zero balance 0.04% of R.O./10ºC
WHITE EXC –
GREEN SIG + Span 0.014% of Load/10ºC Typ.
BLUE SIG –
40
18

Cable diameter/length ø5.6/3m

YELLOW SHIELD
Maximum platform size 400✕400mm
8.5 37 18 6
2-M6 Depth 15mm M6 Pierced
Dustproof/waterproof IP67
4-M4 Bolt with Hexagonal Hole
32
6.5

30
19

32 86 Net Weight : 1.2kg

4-M6 Depth 12mm 6 18 102 18

18

10 150
LCB05K150
20

40

8.5 37 4-M8 Depth 15mm 20 6

4-M4 Bolt with Hexagonal Hole

32
6.5

30
19

32 86

4-M8 Depth 12mm 6 20 98 20

20

Net Weight : 1.2kg

6
 Single Point

LC-4001
Single-point Aluminum Load Cell with Ultra-high Sensitivity
Resolution as high as 10mg
Built-in metal overload stopper
Model No. Capacity
LC-4001-G120 122.4g (1.2N)

Specifications
Rated output 0.4079mV/V or greater
Safe load limit 300% of R.C.
Combined error 0.015% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 40±25% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –5ºC to 35ºC
Temperature effect on
Zero balance 0.14% of R.O./10ºC
Span 0.02% of Load/10ºC Typ.
Cable diameter/length F.P.C.75mm
Maximum platform size 120✕120mm
Dustproof/waterproof IP22

F.P.C. connection code

1. Excitation –
2. Signal –
3. Excitation +
4. Signal +
5. N.C.
Included connector

Depth 8
Approx. 66

Unit = mm
Net Weight : 0.26kg

7
Single Point

LC-4101 Series
Single-point Aluminum Load Cell Ideal for Small
Capacity Weighing

Model No. Capacity

LC-4101-G600 611.8g (6N)
LC-4101-K1.5 1.530kg (15N)
LC-4101-K003 3.059kg (30N)
LC-4101-K006 6.118kg (60N)
LC-4101-K015 15.30kg (150N)

Specifications
Rated output 1.0197mV/V+15% –0%
Safe load limit 300% of R.C.
Combined error 0.015% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 20±5% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.04% of R.O./10ºC
Span 0.014% of Load/10ºC Typ.
Cable diameter/length ø4/1.5m
Maximum platform size 300✕300mm
Dustproof/waterproof IP22
CABLE COLOR CODE 6-M4 Depth 10
RED EXC +
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD

Approx.1.5m ø4

Unit = mm
Net Weight : 0.12kg

8
 Single Point

LC-4102 Series
Single-point Aluminum Load Cell Ideal for Small/Medium
Capacity Weighing

Model No. Capacity

LC-4102-K010 10.20kg (100N)
LC-4102-K015 15.30kg (150N)
LC-4102-K030 30.59kg (300N)
LC-4102-K060 61.18kg (600N)
LC-4102-K150 153.0kg (1.5kN)

Specifications
Rated output 1.0197mV/V+15% –0%
Safe load limit 300% of R.C.
Combined error 0.015% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 20±5% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.04% of R.O./10ºC
Span 0.014% of Load/10ºC Typ.
Cable diameter/length ø4/1.5m
Maximum platform size 400✕400mm
Dustproof/waterproof IP54
CABLE COLOR CODE
RED EXC +
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD
4-M6 Depth 15 2-M6 Depth 15
Rear Protective cover M6 Pierced
Cable

Loading area
Load

Unit = mm
Net Weight : 0.6kg Width of shelf

9
Single Point

LC-4103 Series
Single-point Aluminum Load Cell Ideal for Medium
Capacity Weighing

Model No. Capacity

LC-4103-K060 61.18kg (600N)
LC-4103-K100 102.0kg (1kN)
LC-4103-K150 153.0kg (1.5kN)

Specifications
Rated output 1.0197mV/V+15% –0%
Safe load limit 300% of R.C.
Combined error 0.015% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 20±5% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.04% of R.O./10ºC
Span 0.014% of Load/10ºC Typ.
Cable diameter/length ø6/2m
Maximum platform size 400✕600mm
Dustproof/waterproof IP54

2-M8 M8 Pierced
Depth 22

Loading area
Protective cover
Load

CABLE COLOR CODE

RED EXC +
WHITE EXC –
GREEN SIG +
BLUE SIG –
Width of shelf Unit = mm
YELLOW SHIELD Net Weight : 1.2kg

10
 Single Point

LC-4204 Series
Single-point / Multi-point Aluminum Load Cell

Model No. Capacity

LC-4204-K300 305.9kg (3kN)
LC-4204-K600 611.8kg (6kN)

Specifications
Rated output 1.5296mV/V±0.2%
Safe load limit 200% of R.C.
Combined error 0.015% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 20±5% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±5Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.04% of R.O./10ºC
Span 0.014% of Load/10ºC Typ.
Cable diameter/length ø6/5m
Maximum platform size 600✕700mm
Dustproof/waterproof IP54

4-ø13 Pierced 4-M12 Pierced

Loading area
Protective cover
Load

CABLE COLOR CODE

RED EXC +
WHITE EXC –
GREEN SIG +
BLUE SIG –
Width of shelf Unit = mm
YELLOW SHIELD Net Weight : 2kg

11
Single Point

LCB22 Series
Single-point Aluminum Load Cell with Built-in
Overload Stopper
Extremely durable structure built to withstand excessive loads and impacts
without the need for additional stoppers
Model No. Capacity
LCB22K006 6kg (58.84N)
LCB22K010 10kg (98.07N)
LCB22K015 15kg (147.1N)
LCB22K020 20kg (196.1N)
LCB22K030 30kg (294.2N)

Specifications
Rated output 1.5mV/V±5%
Safe load limit 500% of R.C.
Ultimate safe overload 1000% of R.C.
Combined error 0.02% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±5% of R.O.
Input terminal resistance 1.13kΩ±100Ω
Output terminal resistance 1kΩ ±10Ω
Insulation resistance 2000MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.014% of R.O./10ºC Typ.
Span 0.011% of Load/10ºC Typ.
Cable diameter/length ø4/1.5m
Maximum platform size 400✕400mm
CABLE COLOR CODE Dustproof/waterproof IP65 *
150
17 126.5 RED EXC + * Although this load cell is rated IP65 it can be
WHITE EXC – submerged up to 1m in water for up to 30 minutes
GREEN SIG + similar to the IP67 rating.
BLUE SIG –
YELLOW SHIELD

2-M8 Depth 16 (through hole)

Direction of Load

31
54

47.3

31 9 20 12.4
160 47
Mounting surface
19
28

17 103 17 2-M8 Depth 16

6.5

Unit = mm
Net Weight : 0.5kg

12
 Beam Type
Beam type (multi-point) load cells are suitable
for large capacity weighing, and
ideal for low-profile scales.

Example Applications
●Platform scales
●Hopper scales
●Tank scales
●Conveyer scales, etc.

Example of Installation
The LCM13

Platform

Load cell

Leveling foot

Platform
Socket

Ball
Socket

Load cell

Frame

13
Beam Type

LCM13 Series
Beam Type Stainless Steel Load Cell

Model No. Capacity

LCM13K100 102.0kg (1kN)
LCM13K200 203.9kg (2kN)
LCM13K300 305.9kg (3kN)
LCM13T002 LCM13K500 509.9kg (5kN)
LCM13T001 1.020t (10kN)
LCM13T1.5 1.530t (15kN)
LCM13T002 2.039t (20kN)
LCM13T003 3.059t (30kN)
LCM13T005 5.099t (50kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
LCM13K200
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 380±20Ω
Output terminal resistance 350±3.5Ω
Insulation resistance Greater than 5000MΩ
Weighing Module Kit at DC50V
LCZAP1413 / LCZAP1414 / LCZAP1415 Compensated temperature range –10ºC to 40ºC
* See accessories page Swivel Foot LCZAFT01S Temperature effect on
for more details. Zero balance 0.016% of R.O./10ºC Typ.
Span 0.013% of Load/10ºC Typ.
Cable diameter/length ø4/3m
Dustproof/waterproof IP67

LCM13K100 / LCM13K200 / LCM13K300 Model No. A B C D E F G H I J K L M Net Weight

A
B C D E LCM13K100
LCM13K200 130 16 25 76 13 32 2-ø14 M12 ø21 32 15 2 58 1
LCM13K300
F
(36)

LCM13K500
G H I LCM13T001 130 16 25 76 13 32 2-ø14 M12 ø21 32 15 2 58 1
Direction of Load (Positive output) LCM13T1.5
LCM13T002
171 19 38 95 19 38 2-ø21 M20 ø30.2 38 18 2 76 1.5
J

LCM13T003
K

M LCM13T005 171 19 38 95 19 43 2-ø21 M20 ø30.2 43 20.5 2 76 2

L
(1)

Mounting Surface Unit = mm Net Weight = kg

LCM13K500 / LCM13T001 / LCM13T1.5 / LCM13T002 LCM13T005 CABLE COLOR CODE
A
/ LCM13T003 A RED EXC +
B C D E
B C D E WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD
F
F

G H I
G H I
Direction of Load (Positive output)
Direction of Load (Positive output)
J
J

K
K

M M
L

Mounting Surface Mounting Surface

14
 Beam Type

LCM13-M Series
Stainless Steel Beam Load Cell with Built-in Vibration
Controllers for Lift Prevention
Ideal for tank and hopper scales when corrosion resistance is required
Built-in stopper with pre-adjusted stop cap for easy installation
Model No. Capacity
LCM13K100-M 102.0kg (1kN)
LCM13K200-M 203.9kg (2kN)
LCM13K300-M 305.9kg (3kN)
LCM13K500-M 509.9kg (5kN)
LCM13T001-M 1.020t (10kN)
LCM13T1.5-M 1.530t (15kN)
LCM13T002-M 2.039t (20kN)
LCM13T003-M 3.059t (30kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 150% of R.C.
Permissible horizontal force Maximum 6kN (611kg)
LCM13K100-M ~ T1.5-M
Maximum 12kN (1223kg)
LCM13T002-M ~ T003-M
Permissible lifting force Maximum 20kN (2039kg)
LCM13K100-M ~ T1.5-M
Maximum 30kN (3059kg)
LCM13T002-M ~ T003-M
CABLE COLOR CODE B Combined error 0.03% of R.O.
RED EXC + N F E Additional : 4 washers
M L Use washers to secure
Recommended excitation voltage DC5 to 12V
WHITE EXC –
GREEN SIG + the base. Maximum excitation voltage DC15V
BLUE SIG –
H

8 Zero balance ±1% of R.O.

YELLOW SHIELD ø2
ø13
Input terminal resistance 380±20Ω
D
C

Output terminal resistance 350±3.5Ω

6

Insulation resistance Greater than 5000MΩ

H

4–ø18 4–ø14
at DC50V
(for lower base installation) (for upper plate installation)
Compensated temperature range –10ºC to 40ºC
G Temperature effect on
Zero balance 0.016% of R.O./10ºC Typ.
J

Span 0.013% of Load/10ºC Typ.

Cable diameter/length ø4/3m
A

Dustproof/waterproof IP67
I

P O K

Model No. A B C D E F G H I J K L M N O P Net Weght

LCM13K100-M
LCM13K200-M
LCM13K300-M
97 208 104 70 55 136 138 17 20 23 25 70 15 17 63 118 5.6
LCM13K500-M
LCM13T001-M
LCM13T1.5-M
LCM13T002-M
116 242 118 84 48 175 145 17 24 26 25 84 15 19 63 152 8.6
LCM13T003-M
Unit = mm Net Weight = kg

15
Beam Type

LCM19 Series
Beam Load Cells for Tank and Floor Scales

Model No. Capacity

LCM19K500 509.9kg (5kN)
LCM19T001 1.020t (10kN)
LCM19T1.5 1.530t (15kN)
LCM19T002 2.039t (20kN)

Specifications
Rated output 2.0394mV/V±0.1%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 380±20Ω
Output terminal resistance 350±3.5Ω
Insulation resistance Greater than 5000MΩ
at DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.011% of R.O./10ºC Typ.
Span 0.013% of Load/10ºC Typ.
Weighing Module Kit Cable diameter/length ø4/3m
LCZAP1413 / LCZAP1414 / LCZAP1415
Dustproof/waterproof IP67
* See accessories page Swivel Foot LCZAFT01S
for more details.

CABLE COLOR CODE

RED EXC + A
WHITE EXC – B C D E
GREEN SIG +
BLUE SIG –
YELLOW SHIELD
F

G H I
Direction of load
J
K

M
L

Mounting surface

Model No. A B C D E F G H I J K L M Net Weight

LCM19K500
LCM19T001 130 16 25 76 13 32 2-ø14 M12 ø21 32 15 2 58 1
LCM19T1.5
LCM19T002 171 19 38 95 19 38 2-ø21 M20 ø30.2 38 18 2 76 1.5
Unit = mm Net Weight = kg

16
 Beam Type

LCM19-M Series
Beam Load Cell with Built-in Vibration Controllers
for Lift Prevention
Excellent for tank and hopper scales
Built-in stopper with pre-adjusted stop cap for easy installation
Model No. Capacity
LCM19K500-M 509.9kg (5kN)
LCM19T001-M 1.020t (10kN)
LCM19T1.5-M 1.530t (15kN)
LCM19T002-M 2.039t (20kN)

Specifications
Rated output 2.0394mV/V±0.1%
Safe load limit 150% of R.C.
Permissible horizontal force Maximum 6kN (611kg)
LCM19K500-M ~ T1.5-M
Maximum 12kN (1223kg)
LCM19T002-M
Permissible lifting force Maximum 20kN (2039kg)
LCM19K500M ~ T1.5-M
Maximum 30kN (3059kg)
LCM19T002-M
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 380±20Ω
Output terminal resistance 350±3.5Ω
Insulation resistance Greater than 5000MΩ
B at DC50V
CABLE COLOR CODE N F E Additional : 4 washers
RED EXC + Compensated temperature range –10ºC to 40ºC
M L Use washers to secure
WHITE EXC – the base. Temperature effect on
GREEN SIG +
H

BLUE SIG – 8 Zero balance 0.011% of R.O./10ºC Typ.

YELLOW SHIELD ø2
ø13 Span 0.013% of Load/10ºC Typ.
D
C

Cable diameter/length ø4/3m

6

Dustproof/waterproof IP67
H

4–ø18 4–ø14
(for lower base installation) (for upper plate installation)

G
J
A
I

P O K

Model No. A B C D E F G H I J K L M N O P Net Weight

LCM19K500-M
LCM19T001-M 97 208 104 70 55 136 138 17 20 23 25 70 15 17 63 118 5.6
LCM19T1.5-M
LCM19T002 116 242 118 84 48 175 145 17 24 26 25 84 15 19 63 152 8.6
Unit = mm Net Weight = kg

17
Beam Type

LC-4221 Series
Hermetically Sealed, Beam Type Stainless Steel Load Cell
Ideal for measurements in harsh environments

Model No. Capacity

LC-4221-K010 10.20kg (100N)
LC-4221-K020 20.39kg (200N)
LC-4221-K050 50.99kg (500N)
LC-4221-K100 102.0kg (1kN)
LC-4221-K200 203.9kg (2kN)
LC-4221-K300 305.9kg (3kN)

Specifications
Rated output 2.0394mV/V±0.2%
Safe load limit 200% of R.C.
Combined error 0.05% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±3.5Ω
Insulation resistance Greater than 5000MΩ
at DC50V
Compensated temperature range –10ºC to 60ºC
Temperature effect on
Zero balance 0.07% of R.O./10ºC
CABLE COLOR CODE 120
Span 0.02% of Load/10ºC Typ.
RED EXC + Cable diameter/length ø6/5m
WHITE EXC – A B C D
GREEN SIG + Dustproof/waterproof IP67
BLUE SIG –
YELLOW SHIELD
ø38

ø26

F
Two face

2-E
width 12

20
12 60 36 24
10 3
20

20

M8(only K010-K050)
Unit = mm
Net Weight : 0.8kg

Model No. A B C D E F
LC4221-K010/020/050 27 18 65 10 ø6.6 ø8.1
LC4221-K100/200/300 25 20 65 10 ø8.4 ø10.1

18
 Beam Type

LC-5206 Series
Beam Type Tool Steel Load Cell

Model No. Capacity

LC-5206-K300 305.9kg (3kN)
LC-5206-K500 509.9kg (5kN)
LC-5206-T001 1.020t (10kN)
LC-5206-T002 2.039t (20kN)

Specifications
Rated output 2.0394mV/V±0.2%
Safe load limit 200% of R.C.
Combined error 0.02% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±3.5Ω
Insulation resistance Greater than 5000MΩ
at DC50V
Compensated temperature range –10ºC to 60ºC
Temperature effect on
Zero balance 0.07% of R.O./10ºC
Span 0.02% of Load/10ºC Typ.
Cable diameter/length ø6/3m (K300/K500)
CABLE COLOR CODE ø6/5m (T001/T002)
RED EXC + Dustproof/waterproof IP67
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD

Model No. A B* C D E F G H I J K L M N P Net Weight (kg)

LC5206-K300/K500 137 10 52 55 30 31 19 16 25 83 10.5 105 – – – 0.7
LC5206-T001/T002 185 10 88 57.5 39.5 43.2 35 19 44.5 102.5 17 17 72.5 5.5 0.8 1.7
Unit = mm B* : Approximately

19
Beam Type

LC-5223 Series
Beam Type Tool Steel Load Cell

Model No. Capacity

LC-5223-K500 509.9kg (5kN)
LC-5223-T001 1.020t (10kN)
LC-5223-T1.5 1.530t (15kN)
LC-5223-T002 2.039t (20kN)
LC-5223-T003 3.059t (30kN)
LC-5223-T005 5.099t (50kN)

Specifications
Rated output 2.0394mV/V±0.2%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±3.5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 60ºC
Temperature effect on
Zero balance 0.07% of R.O./10ºC
Span 0.02% of Load/10ºC
CABLE COLOR CODE Cable diameter/length ø4/3m
RED EXC + Dustproof/waterproof IP67
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD

Spacer

Model No. A B C D E F H J K L Net Weight (kg)

LC5223-K500
M12
LC5223-T001
130 16 25 76 13 32 52 ø14 P=1.75 26 1
LC5223-T1.5
Depth16
LC5223-T002
LC5223-T003 M20
171 19 38 95 19 38 76 ø21 P=1.5 38 1.5
LC5223-T005 Depth19
Unit = mm

20
 Beam Type

LBP Series
Hermetically Sealed Beam Type Load Cell

Model No. Capacity

LBP-10L 10.20kg (100N)
LBP-20L 20.39kg (200N)
LBP-30L 30.59kg (300N)
LBP-50L 50.99kg (500N)
LBP-100L 102.0kg (1kN)
LBP-200L 203.9kg (2kN)
LBP-300L 305.9kg (3kN)
LBP-500L 509.9kg (5kN)
LBP-1 1.020t (10kN)
LBP-2 2.039t (20kN)
LBP-5 5.099t (50kN)
LBP-10 10.20t (100kN)

Specifications
Rated output 2.0394mV/V+0.2% –0%
Safe load limit 150% of R.C.
Combined error 0.04% of R.O.
Recommended excitation voltage DC5 to 12V
CABLE COLOR CODE Metal bellows
Cable out location for (positive-bellows-protection)
Maximum excitation voltage DC20V
RED EXC + 200L to 10L J Drill(✕2) I Zero balance ±1% of R.O.
WHITE EXC –
GREEN SIG + Input terminal resistance 420±40Ω
BLUE SIG –
H

Output terminal resistance 347.5±3Ω

øG

øQ

øP
øF

YELLOW SHIELD
H

Insulation resistance 2000MΩ/DC50V

D C B (E) Compensated temperature range –10ºC to 75ºC
Cable out location for 10L to 100L Temperature effect on
Zero balance 0.02% of R.O./10ºC
ø7 Cable Span 0.02% of Load/10ºC
Cable diameter/length ø7/3m
Load direction Dustproof/waterproof IP67
M

+ Polarity

K (L)
A

Unit = mm
Model No. A B C D E øF øG H I J K L M N øP øQ Net Weight (kg)
LBP-10L ~ 100L 125 72 35 8 10 20 42 12 8 Reamer 8.5 Drill(✕2) 53 20 35 15 42 38.5 0.9
LBP-200L ~ 500L 200 120 45 15 20 30 52 14 12 Reamer 14 Drill(✕2) 80 40 40 25 52 50.5 2
LBP-1 210 125 50 15 20 40 52 15 16 Reamer 18 Drill(✕2) 90 40 40 30 68 65 2.8
20 Drill
LBP-2 215 125 50 20 20 43 58 16 ø26 Spotface 22 Drill(✕2) 95 40 50 34 68 65 4
3 Depth
26 Drill
LBP-5 300 135 120 20 25 61 72 20 ø32 Spotface 22 Drill(✕2) 170 50 60 50 92 90 8
3 Depth
20 Reamer
LBP-10 300 118 135 22 25 68 82 25 ø38+0.1
+0.2
Spotface 32 Drill(✕2) 187 52 70 56 108 90 12
10 Depth
21
 Tension Type
Tension type load cells are ideal for tensile
measurements (compression measurements are also possible).
Installation is easy (although safety precautions must be observed).
The structure is less susceptible to biased loading.

Example Applications
●Hopper scales
●Tension measurements, etc.

Example of Load cell bracket

(stationary side)

Installation Protective hardware

The LC-1205

Load cell

Rod-end bearing

Joint

Load cell bracket

(load side)

22
 Tension Type

LC-1205 Series
S-Type Tool Steel Load Cell

Model No. Capacity

LC1205-K020 20.39kg (200N)
LC1205-K050 50.99kg (500N)
LC1205-K100 102.0kg (1kN)
LC1205-K200 203.9kg (2kN)
LC1205-K500 509.9kg (5kN)
LC1205-T001A 1.020t (10kN)
LC1205-T002 2.039t (20kN)
LC1205-T005 5.099t (50kN)

Specifications
Rated output 2.0394mV/V±0.5%
1.5296mV/V±0.5% (K020/K050)
Safe load limit 200% of R.C.
250% of R.C. (K020/K050)
Combined error 0.02% of R.O.
Recommended excitation voltage DC5 to12V
Maximum excitation voltage DC15V
Rod-end bearings are sold separately.
Zero balance ±2% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±3.5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 60ºC
CABLE COLOR CODE (Tension)
RED EXC + Temperature effect on
WHITE EXC – Zero balance 0.07% of R.O./10ºC
GREEN SIG +
BLUE SIG – Span 0.02% of Load/10ºC Typ.
YELLOW SHIELD Cable diameter/length ø6/3m
CABLE COLOR CODE (Compression) ø6/5m (T001A/T002/T005)
RED EXC + Dustproof/waterproof IP54
WHITE EXC –
GREEN SIG –
BLUE SIG +
YELLOW SHIELD

Model No. A B C D M✕P✕Depth Net Weight (kg)

LC1205-K020/K050 50 64 19 23 M6✕1✕11 0.3
LC1205-K100 50 64 12 16 M6✕1✕10 0.4
LC1205-K200/K500 50 64 19 23 M12✕1.75✕10 0.5
LC1205-T001A 75 100 24 28 M18✕1.5✕25 1.3
LC1205-T002 75 100 24 28 M18✕1.5✕22.5 1.3
LC1205-T005 75 100 36 40 M24✕2✕21 1.9
Unit = mm

23
Tension Type

LC-1216 Series
Hermetically Sealed Tool Steel Load Cell
Ideal for measurements in harsh environments

Model No. Capacity

LC1216-K100 102.0kg (1kN)
LC1216-K200 203.9kg (2kN)
LC1216-K500 509.9kg (5kN)
LC1216-T001A 1.020t (10kN)
LC1216-T002A 2.039t (20kN)
LC1216-T005 5.099t (50kN)

Specifications
Rated output 2.0394mV/V±0.5%
Safe load limit 200% of R.C.
Combined error 0.05% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±2% of R.O.
Input terminal resistance Approximately 400Ω
Output terminal resistance 350±3.5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 60ºC
Temperature effect on
Zero balance 0.07% of R.O./10ºC
Span 0.02% of Load/10ºC Typ.
CABLE COLOR CODE (Tension) Cable diameter/length ø6/3m
RED EXC + ø6/5m (T001A/T002A/T005)
WHITE EXC – Dustproof/waterproof IP67
GREEN SIG +
BLUE SIG –
YELLOW SHIELD

CABLE COLOR CODE (Compression)

RED EXC +
WHITE EXC –
GREEN SIG –
BLUE SIG +
YELLOW SHIELD

Model No. A B øC D E F G H M✕P✕Depth Net Weight (kg)

LC1216-K100 104 62 77 50 45 16 19 16 M6✕1✕9 1.7
LC1216-K200/K500 104 62 77 50 45 16 19 16 M12✕1.75✕10 1.8
LC1216-T001A 150 80 102 75 63 27 31 20 M18✕1.5✕13 4.0
(LC1216-T002) 150 80 102 75 63 27 31 20 M18✕1.5✕13 4.0
LC1216-T002A/005 180 80 102 90 63 36 41 34 M24✕2✕25 5.6
Unit = mm

24
 Tension Type

LCS15 Series
S-Type Stainless Steel Load Cell

Model No. Capacity

LCS15K500 509.9kg (5kN)
LCS15T001 1.020t (10kN)
LCS15T002 2.039t (20kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 380±20Ω
Output terminal resistance 350±3.5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.016% of R.O./10ºC
Span 0.013% of Load/10ºC Typ.
Cable diameter/length ø5/4.5m
Dustproof/waterproof IP67

*When using a stainless steel rod end bearing,

set the normal load to 1/2 of the rated capacity.

CABLE COLOR CODE Stainless steel rod end bearing

RED EXC + (Sold separately)
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD

Protective tube

Intended Static Static Net Weight

Model No.
load cells radial load fracture load (g)
Model No. A B C øD M✕P✕Depth Net Weight (kg) LCZARE12S LCS15K500 5.88kN 23.53kN 85
LCS15K500 4 20 80 88 M12✕1.75✕16 0.8 LCZARE18S LCS15T001 11.52kN 46.09kN 258
LCS15T001 4.5 25 80 88 M18✕1.5✕15 1 LCZARE24S LCS15T002 17.4kN 69.62kN 730
LCS15T002 5.5 35 100 108 M24✕2✕24 2
Unit = mm

25
 Compression Type
Compression type load cells are used for compression
measurements and are suitable for large capacity
weighing.

Example Applications
●Truck scales
●Weigh bridges
●Hopper scales
●Tank scales
●Compression measurements, etc.

Example of Installation
Truck scale

Stopper
Maximum clearance : 5mm
Recommended clearance : 2 to 3mm
Reinforced plate
Use steel conduit
Shunt wire and flexible tube for
load cell cable
Base plate
Mutual level error : within 3mm
Self level : within 1/500

Slope of bottom : more than 1/100

26
 Compression Type

LCC07 Series
Hermetically Sealed Stainless Steel Load Cell
Equipped with a transverse load stopper

Model No. Capacity

LCC07K500 509.9kg (5kN)
LCC07T001 1.020t (10kN)
LCC07T002 2.039t (20kN)
LCC07T003 3.059t (30kN)
LCC07T005 5.099t (50kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 780±20Ω
Output terminal resistance 700±10Ω
Insulation resistance 500MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.04% of R.O./10ºC
CABLE COLOR CODE Span 0.014% of Load/10ºC Typ.
100±1 8-ø12
RED EXC + Cable diameter/length ø5.6/5m
WHITE EXC – 77
Dustproof/waterproof IP67
GREEN SIG +
BLUE SIG –
YELLOW SHIELD
100±1

77

SUS Ball
16

R1/4-19
95

ø78
12

Unit = mm
Net Weight : 4kg

27
Compression Type

LCC11/N Series
Hermetically Sealed Stainless Steel Load Cell
with Very Large Weighing Capacity
High resistance to adverse environmental conditions and corrosion (IP68)
Available with or without mounting kit
Model No. Capacity
LCC11T010/LCC11T010N 10.20t (100kN)
LCC11T020/LCC11T020N 20.39t (200kN)
LCC11T030/LCC11T030N 30.59t (300kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 200% of R.C.
Combined error 0.016% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 800±80Ω
Output terminal resistance 2200±10Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –20ºC to 60ºC
Temperature effect on
Zero balance 0.019% of R.O./10ºC Typ.
Span 0.010% of Load/10ºC Typ.
Cable diameter/length ø8/12m
CABLE COLOR CODE Dustproof/waterproof IP68 (100h at 1.5m immersion)
200±1
RED EXC +
140
WHITE EXC – 8-ø20
GREEN SIG + (Upper/lower shared)
BLUE SIG –
YELLOW SHIELD
150±1
100

Load
Ground terminal M4
12 84 28
ø72 47 42
36 12

Four-conductor
shielded cable Upper dust cover
199±1
103

Under boots
PT-1/2
108
100
12 36

ø72 ø99
ø94

Unit = mm
Load Net Weight : 7.5kg

28
 Compression Type

LCC12 Series
Hermetically Sealed Stainless Steel Weighing Module
with Very Large Weighing Capacity
High resistance to adverse environmental conditions and corrosion (IP68)
Equipped with mount assembly (transverse movement control + lift-off prevention)
Model No. Capacity
LCC12T010 10.20t (100kN)
LCC12T020 20.39t (200kN)
LCC12T030 30.59t (300kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 800±80Ω
Output terminal resistance 2200±10Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –20ºC to 60ºC
Temperature effect on
Zero balance 0.019% of R.O./10ºC Typ.
Span 0.010% of Load/10ºC Typ.
Cable diameter/length ø8/12m
Dustproof/waterproof IP68 (100h at 1.5m immersion)

Unit = mm Mount fixture

CABLE COLOR CODE
RED EXC +
8-ø18 120±0.5 Net Weight : 23kg Max. transverse force Max. force for lift
WHITE EXC – LCC12 Series 75kN 80kN
GREEN SIG +
BLUE SIG –
120±0.5
130±1.8
160±1.8

YELLOW SHIELD

270±2.2

Four-
18

Ground conductor
terminal shielded
M4 cable
225±1

PT-1/2
127

18

300±2.2

29
Compression Type

LC-2224 Series
Column Type Load Cell Ideal for Truck Scales and Hoppers

Model No. Capacity

LC2224-T010 10t (98kN)
LC2224-T020 20t (196kN)
LC2224-T030 30t (294kN)
LC2224-T040 40t (392kN)
LC2224-T050 50t (490kN)

Specifications
Rated output 2mV/V±0.1%
Safe load limit 200% of R.C.
Combined error 0.02% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±1% of R.O.
Input terminal resistance 410±30Ω
Output terminal resistance 355±3.5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –20ºC to 60ºC
Temperature effect on
Zero balance 0.009% of R.O./10ºC
Span 0.012% of Load/10ºC Typ.
Cable diameter/length ø8/10m
CABLE COLOR CODE Dustproof/waterproof IP67
RED EXC +
WHITE EXC –
GREEN SIG +
BLUE SIG –
YELLOW SHIELD
The top and bottom plate
dimensions are the same.

Model No. A B C D E F G H J K L Net Weight (kg)

LC2224-T010
200 140 58 92 157 33 29 199±1 131 22 104 12
LC2224-T020
LC2224-T030
200 140 78 92 186 43 39 228±1 158 23 126 15
LC2224-T040
LC2224-T050 220 170 89 112 205 49 45 247±1 171 26 138 18
Unit = mm

30
 Compression Type

CP(Compression) / TP(Tension) Series

Hermetically Sealed Tension and Compression Load Cell
Ideal for measurements in harsh environments

Model No. Capacity

TP (CP)-20L 20.39kg (200N)
TP (CP)-50L 50.99kg (500N)
TP (CP)-100L 102.0kg (1kN)
TP (CP)-200L 203.9kg (2kN)
TP (CP)-300L 305.9kg (3kN)
TP (CP)-500L 509.9kg (5kN)
TP (CP)-1 1.020t (10kN)
TP (CP)-2 2.039t (20kN)
TP (CP)-3 3.059t (30kN)
TP (CP)-5 5.099t (50kN)
TP (CP)-10 10.20t (100kN)
TP (CP)-20 20.39t (200kN)
TP (CP)-30 30.59t (300kN)
TP (CP)-50 50.99t (500kN)
TP (CP)-100 102.0t (1MN)

Specifications
Rated output 3.0592mV/V±0.1%
Safe load limit 150% of R.C.
500% of R.C.(20L to 100L)
Combined error 0.05% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC20V
Zero balance ±1% of R.O.
Input terminal resistance 350±3.5Ω
Output terminal resistance 350±5Ω
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 75ºC
Temperature effect on
Zero balance 0.03% of R.O./10ºC
Span 0.03% of Load/10ºC
Cable diameter/length ø9.7/3m
Dustproof/waterproof IP67
CP
CABLE COLOR CODE For the 200L model and higher, we can also manufacture two-bridge, low-temperature, and
high-temperature models. Unit = mm
36

RED EXC +
WHITE EXC – Spherical
Model No. øA B C øD E F (G) Radius øI J Net Weight (kg)
GREEN SIG + H
BLUE SIG – TP-20L ~ 100L
75

89 115 18 32 6 7 108 50 12 M10✕1.25 Depth 14 3.1

(16)

YELLOW SHIELD PT 1/2 14 threads per inch

CP-20L ~ 100L
TP TP-200L ~ 1 23
CABLE COLOR CODE 89 115 32 7 9 108 50 14 M12✕1.25 Depth 14 3.2
ø9.7 Cable CP-200L ~ 1 28
RED EXC +
WHITE EXC – (G) TP-2 ~ 5
89 150 44 65 10 17 108 100 26 M24✕2 Depth 30 4.8
GREEN SIG – CP-2 ~ 5
øA
BLUE SIG + øI Adapter TP-10
YELLOW SHIELD 125 215 88 100 12 28 150 200 42 M39✕2 Depth 50 10.2
CP-10
F

J TP-20
165 290 78 145 15 28 194 200 58 M50✕2 Depth 65 27.0
(E)

CP-20
H (sp

TP-30
herica

203 360 145 172 23 40 233 300 70 M64✕3 Depth 90 50.0

B

CP-30
42

l radiu

TP-50
s)

J 232 452 145 195 30 48 263 300 82 M76✕3 Depth 115 88.0
CP-50
C

øD TP-100
310 610 180 262 30 70 343 300 108 M100✕3 Depth 150 200.0
1.5

CP-100

31
Compression Type

C2F1/C2Z1/C2X1 Series
Hermetically Sealed Compression Load Cell
Ideal for measurements in harsh environments

Model No. Capacity

C2F1 (C2Z1)-500L 509.9kg (5kN)
C2F1 (C2Z1)-1 1.020t (10kN)
C2F1 (C2Z1)-2 2.039t (20kN)
C2F1 (C2Z1)-5 5.099t (50kN)
C2F1 (C2Z1)-10 10.20t (100kN)
C2F1 (C2Z1)-20 20.39t (200kN)
C2X1-30 30.59t (300kN)
C2X1-50 50.99t (500kN)
C2X1-100 102.0t (1MN)
C2X1-200 203.9t (2MN)
C2X1-300 305.9t (3MN)
C2X1-500 509.9t (5MN)

C2F1 Specifications C2Z1 Specifications C2X1 Specifications

Rated output 2.0394mV/V±0.4% Rated output 2.0394mV/V±0.4% Rated output 2.0394mV/V±1%
Safe load limit 150% of R.C. Safe load limit 500% of R.C. Safe load limit 150% of R.C.
Combined error 0.3% of R.O. Combined error 0.2% of R.O. Combined error 0.4% of R.O.
Recommended excitation voltage DC5 to 12V Recommended excitation voltage DC5 to 12V Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC20V Maximum excitation voltage DC20V Maximum excitation voltage DC20V
Zero balance ±1% of R.O. Zero balance ±1% of R.O. Zero balance ±1% of R.O.
Input terminal resistance 350±3.5Ω Input terminal resistance 350±3.5Ω Input terminal resistance 350±3.5Ω
Output terminal resistance 350±5Ω Output terminal resistance 350±5Ω Output terminal resistance 350±5Ω
Insulation resistance 1000MΩ/DC50V Insulation resistance 1000MΩ/DC50V Insulation resistance 1000MΩ/DC50V
Compensated temperature range –10ºC to 75ºC Compensated temperature range –10ºC to 75ºC Compensated temperature range –10ºC to 75ºC
Temperature effect on Temperature effect on Temperature effect on
Zero balance 0.05% of R.O./10ºC Zero balance 0.05% of R.O./10ºC Zero balance 0.05% of R.O./10ºC
Span 0.1% of Load/10ºC Span 0.1% of Load/10ºC Span 0.1% of Load/10ºC
Cable diameter/length ø9.7/3m Cable diameter/length ø9.7/3m Cable diameter/length ø9.7/3m
Dustproof/waterproof IP67 Dustproof/waterproof IP67 Dustproof/waterproof IP67

(F)
CABLE COLOR CODE
RED EXC +
WHITE EXC –
GREEN SIG +
36

BLUE SIG –
YELLOW SHIELD

Unit = mm
75
(16)

Spherical P.C.D Net Weight (kg)

Model No. øA B Radius E F øG H øI J L
PT 1/2 14 threads per inch C D Approximately
ø9.7 Cable
C2Z1-500L ~ 2 113 85 50 50 4-M6 Depth 10 138 80 10 M16✕1.5 27 1.5 4
øA
C2F1-500L ~ 2 98 105 50 50 4-M6 Depth 10 120 76 9 M16✕1.0 36 1.5 2
øI
C2Z1-5 ~ 10 138 110 100 60 4-M8 Depth 15 165 100 15 35 44 1.5 8
C2F1-5 ~ 10 98 100 100 60 4-M8 Depth 15 120 76 10 24 32 1.5 3
(H)

C2Z1-20 164 145 200 80 4-M12 Depth 20 193 120 20 45 66 2 14

C (spher

C2F1-20 120 120 150 80 4-M12 Depth 20 145 100 10 36 45 1.5 6

42

ical radius

C2X1-30, 50 138 160 200 80 4-M12 Depth 20 165 120 20 50 72 2 10

)

C2X1-100 164 190 200 100 4-M16 Depth 20 193 140 30 70 80 2 18

J

C2X1-200 214 230 300 130 4-M16 Depth 25 245 180 30 95 100 2 34
P.C.D.
L

D
4-E C2X1-300 214 320 600 130 4-M24 Depth 35 245 180 30 120 150 2 50
øG
C2X1-500 316 400 800 200 6-M30 Depth 50 349 260 30 170 200 2 140

32
 Compression Type

CMX/CM Series
Hermetically Sealed Compression Load Cells
Miniature size and waterproof light weight construction

Model No. Capacity

CMX-50L 50.99kg (500N)
CMX-100L 102.0kg (1kN)
CMX-200L 203.9kg (2kN)
CMX-500L 509.9kg (5kN)
CMX-1 1.020t (10kN)
CMX-2 2.039t (20kN)
CM-5 5.099t (50kN)
CM-10 10.20t (100kN)
CM-20 20.39t (200kN)

Specifications
Rated output 2.0394mV/V±0.4% (CMX)
2.0394mV/V±0.5% (CM)
Safe load limit 150% of R.C.
Combined error 0.2% of R.O. (CMX)
CABLE COLOR CODE
ø62 Unit = mm 0.25% of R.O. (CM)
RED EXC + CMX ø12
Recommended excitation voltage DC5 to 12V
3

WHITE EXC – Maximum excitation voltage DC15V (CMX), 18V (CM)

spherical ra

GREEN SIG +
25
22

19

BLUE SIG – Zero balance ±2% of R.O.

dius 50

YELLOW SHIELD Input terminal resistance 425±50Ω

1.5

83
Output terminal resistance 350±5Ω
Insulation resistance 1000MΩ/DC50V
Compensated temperature range –10ºC to 60ºC
20

Temperature effect on
Zero balance 0.1% of R.O./10ºC
P.C.D.42
40

Span 0.1% of Load/10ºC

M5✕4, 6 Depth
Cable diameter/length ø5/3m (CMX)
ø8.6/3m (CM)
Net Weight : 0.8kg Dustproof/waterproof IP67
ø5 Cable

CM ø114
ø25
(47)
(16)
PT 1/2 14 threads per inch
5

ø8.6 Cable
spheric
50

ø22

20
al radius
100

P.C.D. 90
M8✕4, 15 Depth

Net Weight : 3.7kg

33
Compression Type

TM/UM Series
Hermetically Sealed Load Cells for Multiple Applications
Tension-TM, Tension and Compression-UM

Model No. Capacity

TM (UM)-50L-A 50.99kg (500N)
TM (UM)-100L-A 102.0kg (1kN)
TM (UM)-200L 203.9kg (2kN)
TM (UM)-500L 509.9kg (5kN)
TM (UM)-1 1.020t (10kN)
TM (UM)-2 2.039t (20kN)

TM (-A) Specifications
UM Rated output 2.0394mV/V±0.5%
Safe load limit 150% of R.C.
Combined error 0.2% of R.O.
Recommended excitation voltage DC5 to 12V
TM
Maximum excitation voltage DC18V
Zero balance ±10% of R.O.
Input terminal resistance 425±50Ω
TM UM Output terminal resistance 350±5Ω
CABLE COLOR CODE CABLE COLOR CODE
RED EXC + RED EXC + Insulation resistance 1000MΩ/DC50V
WHITE EXC – WHITE EXC – Compensated temperature range –10ºC to 60ºC
GREEN SIG – GREEN SIG +
Temperature effect on
BLUE SIG + BLUE SIG –
YELLOW SHIELD YELLOW SHIELD Zero balance 0.1% of R.O./10ºC
øA (62) Span 0.1% of Load/10ºC
øG Cable diameter/length ø5/3m
1.6 Slot Dustproof/waterproof IP67

UM (-A) Specifications
Rated output 2.0394mV/V±1% (Tension)
D

Cable shield ø5 Cable 2.0394mV/V±3% (Compression)

F

Safe load limit 150% of R.C.

B

(ø12)
E

Combined error 0.3% of R.O.

C

Recommended excitation voltage DC5 to 12V

2-H Maximum excitation voltage DC18V
Zero balance ±10% of R.O.
1.6 Slot
Input terminal resistance 425±50Ω
øG
Output terminal resistance 350±5Ω
Insulation resistance 1000MΩ/DC50V
Compensated temperature range –10ºC to 60ºC
Model No. øA B C D E F øG H Net Weight (kg)
Temperature effect on
TM-50L-A, 100L-A
50 70 43 27 23 10 10 M12✕1.75 0.3 Zero balance 0.1% of R.O./10ºC
UM-50L-A, 100L-A
Span 0.1% of Load/10ºC
TM-200L
50 70 40 30 20 13 10 M12✕1.75 0.5 Cable diameter/length ø5/3m
UM-200L
Dustproof/waterproof IP67
TM-500L ~ 2
62 85 45 40 20 18 13.5 M16✕2 0.9
UM-500L ~ 2
Unit = mm

34
 Button Load Cell

LCC21 Series
Stainless Steel Compact Compression Load Cell
Can be used for load distribution and press pressure measurement

Model No. Capacity

LCC21N100 10.20kg (100N)
LCC21N200 20.39kg (200N)
LCC21N500 50.99kg (500N)
LCC21KN001 102.0kg (1kN)

Specifications
Rated output 1mV/V or more
Safe load limit 150% of R.C.
Combined error 0.5% of R.O.
Recommended excitation voltage DC5V
Maximum excitation voltage DC5V
Zero balance ±100% of R.O.
LCC21N100/N200 Input terminal resistance 1kΩ ±0.1kΩ
LCC21N500/KN001 Output terminal resistance 1kΩ ±0.01kΩ
Insulation resistance 500MΩ/DC50V
Compensated temperature range 0ºC to 70ºC
Standard attachment holder
Permissible temperature range –10ºC to 80ºC
Temperature effect on
Zero balance 0.5% of R.O./10ºC Typ.
Span 0.5% of Load/10ºC Typ.
Cable diameter/length ø2mm/2m
CABLE COLOR CODE Dustproof/waterproof IP64
Stainless steel load cell Attachment holder
RED EXC + Include standard attachment holder 1 piece
WHITE EXC – G
B
GREEN SIG + A H 2-ø3.5 Resonance frequency
ø2

BLUE SIG –
LCC21N100 LCC21N200 LCC21N500 LCC21KN001
YELLOW SHIELD
45kHz 55kHz 30kHz 35kHz

Force direction
J
I
C
D
E

Stainless steel
F

Attachment surface thickness : 1.5

Model No. A B C D E F G H I J Net Weight (g)

LCC21N100/N200 ø10 18 4 3.6 1.6 SR3 16 8 28 20 Approx. 15
LCC21N500/KN001 ø16 24 7 6 3 SR6 22 14 32 24 Approx. 20
Unit = mm

35
Button Load Cell

LCCA21 Series
Stainless Steel Compact Compression Load Cell
Can be used for load distribution and press pressure measurement

Model No. Capacity

LCCA21N100 10.20kg (100N)
LCCA21N200 20.39kg (200N)
LCCA21N500 50.99kg (500N)
LCCA21KN001 102.0kg (1kN)

Specifications
Safe load limit 150% of R.C.
Combined error 0.5% of R.O.
Supply voltage DC5V±0.25V less than 16mA
Load resistance more than 5kΩ
Output voltage 1V to 4V *1
Zero voltage 1V±0.04V
Span voltage 2V±0.01V (1V to 3V)
Insulation resistance 500MΩ/DC50V
between signal wires and load cell
Compensated temperature range 0ºC to 70ºC
Permissible temperature range –10ºC to 80ºC
Temperature effect on
Zero balance 0.6% of R.O./10ºC Typ.
Span 0.6% of Load/10ºC Typ.
Stainless Attachment holder G
CABLE COLOR CODE B Frequency characteristics 100Hz (–3dB)
A H 2-ø3.5
RED Power + steel
load cell Cable diameter/length
WHITE Power –
GREEN Output From load cell to amplifier ø2mm/2m
Force direction
J
I

BLUE GND Stainless steel From amplifier ø6mm/0.5m

C
D
E

YELLOW SHIELD thickness : 1.5

Dustproof/waterproof Load cell IP64
F

Attachment surface
Include standard attachment holder 1 piece and
Amplifier 99 amplifier case holder 1 set
32

Resonance frequency
LCCA21N100 LCCA21N200 LCCA21N500 LCCA21KN001
45kHz 55kHz 30kHz 35kHz
Nickel plating *1
13

Load [% of R.C.] 0% 100% 150%

Output voltage 1V 3V 4V
Amplifier case holder Attachment Diagram
10 14 77 Standard attachment holder
45
35

2-ø3.5

Model No. A B C D E F G H I J Net Weight (g)

LCCA21N100/N200 ø10 18 4 3.6 1.6 SR3 16 8 28 20 Approx. 65
LCCA21N500/KN001 ø16 24 7 6 3 SR6 22 14 32 24 Approx. 70
Unit = mm * Net Weight includes the amplifier and cables

36
 Flameproof Type
Flameproof load cell series with TIIS certificates
In factories and locations where explosive fumes, oils, and other dangerous flammable items are handled,
products with flameproof constructions must be used to prevent fires from electrical sparks and heat.
A&D load cells have passed type approval of electrical equipment for use in explosive atmospheres
by the Technology Institution of Industrial Safety (TIIS).

Flameproof and intrinsically safe flameproof enclosures

●Flameproof enclosure
This enclosure is totally enclosed. If gas or vapor enters the interior of this enclosure and causes an explosion,
the enclosure withstands the force of the explosion, and thereby prevents fires caused by the explosion from
igniting gas or vapor outside the enclosure.
●Intrinsically safe flameproof enclosure
This enclosure is equipped with technical measures to prevent electrical sparks and heat in the electrical circuit of
the equipment from igniting fires in explosive atmospheres.

●Example of displayed ratings

and their meanings

Indicates an flameproof product

Types of flameproof constructions

(d: flameproof; i: intrinsically safe flameproof)
1. Electrical equipment group (or explosion class)
2. Temperature class (or ignition temperature)
1. Electrical equipment group in TIIS Types and explosion classes of gases and vapors
Group I indicates flameproof equipment for coal Range of safety gaps for gases and vapors Class Group Explosion class
mines, and Group II indicates equipment for other 0.9 mm or more A IIA
1
locations. Groups are further classified as A, B, or More than 0.5 mm and less than 0.9 mm B
IIB
C based on applicable gases or vapors. 0.5 mm or less C 2
IIC 3

2. Temperature class in TIIS Temperature class Maximum surface temperature of flameproof equipment Temperature class Ignition temperature of gases and vapors
In the past, ignition temperatures were classified T1 Items of 450°C or less G1 Items exceeding 450°C
by the gas or vapor ignition temperature, T2 Items of 300°C or less G2 Items exceeding 300°C
but international standards now classify them T3 Items of 200°C or less G3 Items exceeding 200°C
by the maximum surface temperature of the T4 Items of 135°C or less G4 Items exceeding 135°C
flameproof equipment and are noted in the T5 Items of 100°C or less G5 Items exceeding 100°C
T6 Items of 85°C or less G6 Items exceeding 85°C
following manner.

3. Typical explosion classes and ignition temperatures ●Classification by location of use in TIIS
Ignition
temperatures Locations (zones) that require flameproof measures are
G1 G2 G3 G3
Explosion
classes classified from 0 to 2 by the degree of hazardous
Acetone Ethanol Gasoline Acetaldehyde atmosphere. It is necessary to select the equipment
Ammonia Butanol Hexane Ethyl ether
according to these location classes.
Ethane Butane Pentane
1 Toluene Carbon dioxide Zone 0: A location where a dangerous atmosphere is
Acetic acid continually present or present for a long period
Methane
under normal conditions.
Propane
Coal gas Ethylene Isoprene Zone 1: A location where a dangerous atmosphere
2
Ethylene oxide Hydrogen sulfide may be generated under normal conditions.
3 Hydrogen Acetylene
Zone 2: A location where a dangerous atmosphere
may be generated under abnormal conditions.
37
Flameproof Type

LCB01/02/06 Series
Flameproof Single-point Load Cells
Flameproof class TIIS ExdIIBT4 compliant

Model No. Capacity

LCB01K030E 30.59kg (300N)
LCB01K060E 61.18kg (600N)
LCB02K150E 153.0kg (1.5kN)
LCB06K300E 305.9kg (3kN)
LCB06K600E 611.8kg (6kN)

Specifications
Rated output 0.3059mV/V±10% (LCB01/02)
LCB01/02 Series 0.55mV/V±10% (LCB06)
Safe load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance 20±5% of R.O.
Input terminal resistance 418±20Ω (LCB01/02)
410±20Ω (LCB06)
Output terminal resistance 348.5±5Ω (LCB01/02)
350±5Ω (LCB06)
Insulation resistance 5000MΩ/DC50V
Compensated temperature range –10ºC to 40ºC
Temperature effect on
Zero balance 0.05% of R.O./10ºC
Span 0.03% of Load/10ºC Typ.
Maximum platform size 400✕400mm (LCB01)
400✕600mm (LCB02)
LCM06 Series 600✕700mm (LCB06)
Cable diameter/length ø7/6m
Dustproof/waterproof IP54

52~56 287
LCB01/02 Series LCB06 Series
24 40 165 40 18
13

A
Double-sided

C
width 24

ø57
150
124
D
E
B

44

Female screw PF 1/2

M27×1
(Nominal diameter of
compatible conduits: 16)
F 4-ø13 4-M12
13

75
ø38
22
H
I
G

130.6
106
82.3
40.3

J K J L N
22

O M M
Earth terminal M4 100
LCB06 Series Net Weight : 10kg

CABLE COLOR CODE

Model No. A B C D E F G H I J K L M N O Net Weight (kg) RED EXC + ORANGE Sensing +
WHITE EXC – BLACK Sensing –
LCB01K030E/060E 165 65 M6 46 60 193 75 65 81 10 50 70 6 28 180 2.2 GREEN SIG + YELLOW SHIELD
LCB02K150E 210 76 M8 56 70 238 82.5 72.5 89 7 61 80 7 61 230 4.9 BLUE SIG –
Unit = mm
38
 Flameproof Type

LCM17/LCM17-M Series
Flameproof Beam Type Stainless Steel Beam Load Cells
Flameproof class TIIS ExdIIBT4 compliant

Model No. Capacity

LCM17K100E 102.0kg (1kN)
LCM17 Series LCM17K200E 203.9kg (2kN)
LCM17K300E 305.9kg (3kN)
LCM17K500E 509.9kg (5kN)
LCM17T001E 1.020t (10kN)
LCM17T002E 2.039t (20kN)

Steady-arm models with anti-uplift mechanism

(LCM17 unit and steady arm)
Model No. Capacity
LCM17K100E-M 102.0kg (1kN)
LCM17K200E-M 203.9kg (2kN)
LCM17K300E-M 305.9kg (3kN)
LCM17K500E-M 509.9kg (5kN)
LCM17T001E-M 1.020t (10kN)
LCM17T002E-M 2.039t (20kN)

Specifications
Rated output 1.0mV/V±0.1%
LCM17-M Series
(0.5mV/V±0.1% for 1kN)
Load limit 150% of R.C.
Combined error 0.03% of R.O.
Recommended excitation voltage DC5 to 12V
Maximum excitation voltage DC15V
Zero balance ±2% of R.O.
Input terminal resistance 390±30Ω
Output terminal resistance 350±5Ω
Insulation resistance Greater than 5000MΩ
LCM17 Series
CABLE COLOR CODE at DC50V
Double-sided width 24

A
B RED EXC +
Compensated temperature range –10ºC to 40ºC
C D E F M WHITE EXC –
GREEN SIG + Temperature effect on
BLUE SIG – Zero balance 0.028% of R.O./10ºC
YELLOW SHIELD
Span 0.011% of Load/10ºC Typ.
G
H

GREEN / YELLOW EARTH

Cable diameter/length ø7/5m
O N
+0.2
Dustproof/waterproof IP54
Female screw G1/2 (PF1/2) 0

(Nominal diameter of compatible conduits: 16)

Q±2 LCM17-M
Direction of force
ø38

Permissible horizontal force Maximum 10kN (1019kg)

Permissible lifting force Maximum 20kN (2039kg)
R±2
K
J
P

CABLE COLOR CODE LCM17-M Series

Earth terminal M4 L RED EXC +
(S)
4.5±2

WHITE EXC – Additional : 4 washers

B
Double-sized width 24

GREEN SIG + Use washers to secure

N F E
BLUE SIG – the base.
GREEN / YELLOW EARTH M L
8
ø2 3
H

Model No. A B C D E F G H J K L M N O P Q R Net Weight ø1

LCM17K100E
D
C

LCM17K200E
6

LCM17K300E (256) 170 56 25 76 13 43 32 43 41 94 M12 ø21 ø14 20.5 88 54 2.8 Female screw G1/2(PF1/2)
(Normal diameter of
H

LCM17K500E compatible conduits 16)

LCM17T001E 4–ø18 4–ø14 (for upper plate installation)
(for lower base installation)
LCM17T002E (298) 212 60 38 95 19 48 38 48 46 117 M20 ø30.2 ø21 23 94 59 3.9
Unit = mm Net Weight = kg G

Model No. A B C D E F G H I J K L M N O P Q R S Net Weight

J

LCM17K100E-M
øR

LCM17K200E-M
A

LCM17K300E-M 118 238 124 90 42 140 180 17 24 16 25 125 15 56 54 157 54.5 38 324 8.7
Q

LCM17K500E-M
I

LCM17T001E-M P O K

LCM17T002E-M 132 274 124 90 42 172 180 17 24 16 25 125 15 60 54 193 57 43 360 11.2
Unit = mm Net Weight = kg

39
Flameproof Type Equipment

AD-4386 Series of Flameproof Summing Boxes

Two to four flameproof load cells can be summed in parallel.
Boxes include an embedded potentiometer to adjust
the output of load cells.
●AD-4386-2, AD-4386-3, and AD-4386-4
(for summing 2, 3, and 4 load cells, respectively)
●Complies with TIIS EXdIIBT4 specifications for explosion class and
ignition temperature and is suitable for Zones 1 and 2
●Certified under the Labor Safety and Health Law (TC13430 ) in Japan

AD-4387 Flameproof Junction Box

This extension connection box is used when an flameproof
load cell and indicator are separated.
Its compact size and light weight make operation easy.
●Complies with TIIS EXdIIBT4 specifications for explosion class and
ignition temperature and is suitable for Zones 1 and 2
*There is no Labor Safety and Health Number because there is no electrical contact.

SB-FP Series Flameproof Platforms

Uses lightweight and compact single-point load cell
●Complies with TIIS EXdIIBT4 specifications for explosion class and
ignition temperature and is suitable for Zones 1 and 2
●Optional roller conveyor can Model No. Capacity Dimensions (D✕W✕Hmm) Platform Weight
be prepared. Conforms to SB30K05-FP 30kg 290✕375✕140 13kg
i2G4 flameproof standard for SB60K05-FP 60kg 290✕375✕140 13kg
SB150K06-FP 150kg 390✕530✕170 15kg
use in Zones 0,1 and 2
SB300K07-FP 300kg 600✕700✕210 57kg
●Compliant with SB600K07-FP 600kg 600✕700✕210 57kg
LCB01/LCB02/LCB06 Cable length : 6m Measurement Accuracy : 1/3000

AD-4403-FP Flameproof Weighing Indicator

Built-in sequences for normal batching and loss-in-weight
weighing.
Complies with TIIS EXdIIBT5X specifications for explosion class
and ignition temperature and is suitable for Zones 1 and 2
●High-speed sampling (100 times/second) ensures sensitive response
to weight changes
●Equipped with a main and secondary display
The main display shows the mass value and the secondary
display shows settings and total weight
●Calculates net weight automatically after weighing
●Equipped with a control I/O with 6 inputs and 9 outputs as standard
●Equipped with 20 mA current loop output as standard
(for connections to A&D peripherals)
●Digital calibration function
40
 Weighing Platform

Waterproof Weighing Platforms SB Series

Easy-to-use, complete platform equipped with
stainless steel weighing pan and load cell
●Water and dust proof (IP-65) for sanitary,
safe use in the toughest industrial environment
Model No. Capacity Dimensions (D✕W✕Hmm) Platform Weight
SB-15K10 15kg 250✕250✕110 4.5kg
SB-60K11 60kg 330✕424✕110 8kg
SB-100K12 100kg 390✕530✕135 14kg
SB-200K12 220kg 390✕530✕135 14kg

Cable length : 3m 

Linearity & Hysteresis : 0.03% of R.O.
Pan material : Stainless steel

SB-SC Series Dustproof/Waterproof Platforms

IP68 compliant body resists water from heavy duty cleaning
Can be fully submerged in water for cleaning
(Conditions : Water depth at most 1m continuously for 24 hours)
Model No. Capacity Dimensions (D✕W✕Hmm) Platform Weight
SB30K17SC 30kg 300✕380✕117 9.3kg
SB60K17SC 60kg 300✕380✕117 9.3kg
SB150K17SC 150kg 300✕380✕117 9.3kg
SB60K18SC 60kg 390✕530✕117 13kg
SB150K18SC 150kg 390✕530✕117 13kg

Cable length : 1.5m

Linearity & Hysteresis : 0.03% of R.O.
Base unit and pan material : Stainless steel 304

Skeleton frame structure

Easy-to-clean design won’t accumulate stains or grime

41
Equipment

AD-4379 Stainless Steel Summing Box

Stainless steel, Unit = mm

dustproof/waterproof (IP67).
Up to 4 connections possible.

40

200
166
184
Equipped with load cell

40
sensitivity adjustment trimmer.
For load cell cable diameters
30
between 4 to 12mm.

2-
ø8
166

67
Net Weight =1.5kg

AD-4382 Summing Box

For connecting 2 load cells. Max outer diameter ø8
For load cell (2)

Dustproof, waterproof IP56. Max outer diameter ø8

For indicator Cross

Equipped with load cell screw

sensitivity adjustment trimmer.

Unit = mm

AD-4380SUS/AD-4380 Junction Box

AD-4380SUS
Extends cables from load cell to indicator.
AD-4380SUS
Stainless steel, dustproof/waterproof (IP67).
Does not contain load cell sensitivity adjustment trimmer.
AD-4380 AD-4380
Extends cables from load cell to indicator.
Dustproof, waterproof IP56.
Does not contain load cell sensitivity adjustment trimmer.
AD-4380SUS AD-4380 Unit = mm
160
140
ø135
165 MAX
30

2-ø8

4-M6 Cross hole with

hexagonal bolt
65 MAX

25
3

42
 Equipment

Anti-vibration Mounting Fixture LCZ Series

Model No. Max.transverse load C Unit = mm
G
LCZAP0405
20kN
LCZAP0408
(Only in X direction)
LCZAP0411

B
Applicable range chart

E
Model No. CP/CP-FP Model M16

D
LCZAP0405 200L~1 6-øJ F E D

LCZAP0408 2~5 4-øJ

LCZAP0411 10

15

H
* Intended load cells for CP/CP-FP

X-Load Direction

A
I
Model No. A B C D E F G H (I) J K L
LCZAP0405 154 170 300 11.5 77 200 100 15 124 8 25 250
LCZAP0408 213 200 315 12.5 105 185 130 23 167 12 40 265

H
LCZAP0411 303 230 330 17.5 125 170 160 30 243 14 55 280 L

Weighing Module Kit LCZAP1413/1414/1415

Model No. LCZAP1413 LCZAP1414 LCZAP1415 Unit = mm

4-ø
(sold separately)
Load cell
LCM13K100 LCM13T002 LCM13T005

G
LCM13K200
Intended LCM13K300 LCM13T003
LCM13K500
load cells LCM13T001 LCM19T002
LCM13T1.5
LCM19K500
LCM19T001

B
F
LCM19T1.5
Max. horizontal force 6kN 12kN 20kN

L
C

Max. lifting force 20kN 30kN 40kN

K

Max. displacement 2mm(All directions) 2mm(All directions) 2mm(All directions)

E
4-

H D H
Net Weight 3.4kg 6.0kg 12.0kg
øG

C
* Net weight does not include load cell

Model No. A B C D E F øG H I J K L
LCZAP1413 97 168 100 70 15 136 14 15 20 23 50 70
LCZAP1414 116 212 120 84 18 175 14 18 24 26 60 84 I J
A
LCZAP1415 121 227 150 100 18 190 14 25 24 29 75 114

Swivel Foot LCZAFT01S

LCM13K100 ø26 Unit = mm
LCM13K200 ø20.6
M12
LCM13K300
LCM13K500
10

Intended load cells LCM13T001

28

LCM13T1.5 M12 Hex nut

55 to 60

LCM19K500
LCM19T001
LCM19T1.5
20

10

ø58
20 to 25

LCM13K500
LCM13T001
20

ø58 Net Weight : 0.25kg

10

43
Accessories
Mounting Fixtures
Rod-end bearings
Order No. Intended load cells Remarks
LCB-A6 LC1205-K020/K050/K100, LC1216-K100, LC1122-K050/K100 M6✕1
LCB-A12 LC1205-K200/K500, LC1216-K200/K500, LC1122-K250/K500 M12✕1.75
LCB-A18 LC1205-T001A, LC1216-T001A M18✕1.5
LCB-18 LC1205-T002 M18✕1.5
LCB-24-2T LC1216-T002A M24✕2
LCB-24-5T LC1205-T005, LC1216-T005 M24✕2

Mounting illustration
Mounting illustration Mounting illustration
LC-1205 LC-1216
Approximately

Approximately

Approximately

Approximately
Unit = mm Unit = mm

Model No. Rod-end bearings A B C øDH7 E F Model No. Rod-end bearings A B C øDH7 E F
LC1205-K020/K050/K100 LCB-A6 116 134 18 6 7 9 LC1216-K100 LCB-A6 160 178 18 6 7 9
LC1205-K200/K500 LCB-A12 152 182 30 12 12 16 LC1216-K200/K500 LCB-A12 194 224 30 12 12 16
LC1205-T001A LCB-A18 194 236 42 18 17 23 LC1216-T001A LCB-A18 270 312 42 18 17 23
LC1205-T002 LCB-18 214 257 43 18 16.3 20 (LC1216-T002) LCB-18 285 328 43 18 16.3 20
LC1205-T005 LCB-24-5T 268 338 70 25 25.3 35 LC1216-T002A LCB-24-2T 320 376 56 25 22 31
LC1216-T005 LCB-24-5T 342 412 70 25 25.3 35

Stainless-steel rod end bearing (for LCS15 load cell)

LCZARE12S
0
16−0.13 Unit = mm
30±0.5
Applicable load cell: LCS15K500 12±0.3
ø12 H7

Static radial load rating: 5.88kN

Static fracture load: 23.53kN
(ø17.6)

Mass: 85g
)
(69)

.81
54±0.5

23
(Sø
33±0.3

M12✕1.75

0
LCZARE18S 23−0.13
42±0.5
Applicable load cell: LCS15T001 16.5±0.3

Static radial load rating: 11.52kN

Static fracture load: 46.09kN
ø18 H7

(ø21.9)

Mass: 258g
5)
(93)

1.7
ø3
72±0.5

(S
44±0.7

M18✕1.5

0
LCZARE24S 56±0.5
31−0.13
22±0.3
Applicable load cell: LCS15T002
Static radial load rating: 17.4kN
Static fracture load: 69.62kN
ø25 H7

(ø29.6)

Mass: 730g
)
.86
(122)

2
ø4
94±0.5

(S
57±0.7

M24✕2.0
*When using a stainless steel rod end bearing,
set the normal load to 1/2 of the rated capacity.
*One stainless steel nut (Type 1) is included as standard.
44
 Accessories

Compression fixtures
Intended load cells Components - Single convex Components - Double convex
Bearing plate Mounting plate Load button Bolt Button-hole plate Load button Bolt
LC1205-K020/K050/K100 LCBP-1 LCMP-1 LCLB-1 M6 LCBHP-1 LCLB-1 M6
LC1205-K200/K500 LCBP-1 LCMP-2 LCLB-2 M6 LCBHP-1 LCLB-2 M6
LC1205-T001A/T002 LCBP-2 LCMP-4 LCLB-4 M10 LCBHP-2 LCLB-4 M10
LC1205-T005 LCBP-2 LCMP-5 LCLB-5 M10 LCBHP-3 LCLB-5 M10
*A bolt is included to attach the load cell
Single convex Double convex to the mounting plate.

Mounting illustration Mounting illustration

ø60 ø60
Bearing plate (LCBP) Button-hole plate (LCBHP)

E
E

Load button protector (LCLB) Load button (LCLB)

A
H

Load cell LC-1205

H
A
Load cell LC-1205
Load button (LCLB)
D

Mounting plate (LCMP)

D
Button-hole plate (LCBHP)
C
B

C
B
8-øF 8-øF

B B
C C
Unit = mm Unit = mm

Model No. A B C D E F H Model No. A B C D E F H

LC1205-K020/K050/K100 115 77 100 16 16 8 72 LC1205-K020/K050/K100 120 77 100 16 16 8 70
LC1205-K200/K500 115 77 100 16 16 8 72 LC1205-K200/K500 120 77 100 16 16 8 70
LC1205-T001A/T002 164 105 130 22 19 12 115 LC1205-T001A/T002 178 105 130 19 19 12 110
LC1205-T005 167 105 130 22 19 12 118 LC1205-T005 190 105 130 19 19 12 116

Compression fixtures
Intended load cells Components - Single convex Components - Double convex
Bearing plate Mounting plate Load button Bolt Button-hole plate Load button Bolt
LC1216-K100 LCBP-1 LCMP-1 LCLB-1 M6 LCBHP-1 LCLB-1 M6
LC1216-K200/K500 LCBP-1 LCMP-2 LCLB-2 M6 LCBHP-1 LCLB-2 M6
LC1216-T001A/(T002) LCBP-2 LCMP-4 LCLB-4 M10 LCBHP-2 LCLB-4 M10
LC1216-T002A/T005 LCBP-2 LCMP-5 LCLB-5 M10 LCBHP-3 LCLB-5 M10
*A bolt is included to attach the load cell
Single convex Double convex to the mounting plate.

Mounting illustration Mounting illustration

ø60 ø60
Bearing plate (LCBP) Button-hole plate (LCBHP)
E

Load button protector (LCLB) Load button (LCLB)

J J
O ring
(Attachment of LCBHP)
A
H

H
A

Load cell LC-1216 Load cell LC-1216

øG øG
Load button (LCLB)
D

Mounting plate (LCMP)

D

Button-hole plate (LCBHP)

C
B

C
B

8-øF 8-øF

B B
C C
Unit = mm Unit = mm

Model No. A B C D E øF øG H J Model No. A B C D E øF øG H J

LC1216-K100 155 77 100 16 16 8 77 114 62 LC1216-K100 160 77 100 16 16 8 77 110 62
LC1216-K200/K500 155 77 100 16 16 8 77 114 62 LC1216-K200/K500 160 77 100 16 16 8 77 110 62
LC1216-T001A/(T002) 214 105 130 22 19 12 102 165 80 LC1216-T001A/(T002) 228 105 130 19 19 12 102 160 80
LC1216-T002A/T005 247 105 130 22 19 12 102 198 80 LC1216-T002A/T005 270 105 130 19 19 12 102 196 80

45
Accessories
Mounting Fixtures
Universal shackle
For TP For TM
E D
C

øEH7
øA
Min B
(C)

A±1.0
D hexagonal nut øF

øF1.6 split pin

øHH7 G
F

øB
Unit = mm Unit = mm

Intended load cells Model No. øA B C D hexagonal nut E F G øHH7 Net Weight (kg) Intended load cells Model No. øA øB C D øEH7 øF Net Weight (kg)
TP-20L ~ 100L S-1 89 183 209 M10✕1.25 26 14 10.5 10 0.2 TM-50L-A
0
TP-200L ~ 1 S-2 89 195 229 M12✕1.25 34 16 13.3 12 0.3 TM-100L-A SM-1 138 30 12+0.1 16–0.1 12 50 0.2
TP-2 ~ 5 S-3A 89 280 342 M24✕2 62 28 19.3 22 1.4 TM-200L-A
TP-10 S-4 125 461 561 M39✕2 100 43 39 40 9 TM-500L ~ 1 SM-2A 170 38 15 21 16 62 0.4
0
TP-20 S-5 165 622 742 M50✕2 120 53 49 50 17 TM-2 SM-2 170 39 15.25+0.13 19–0.13 16 62 0.4
Note: The Min B dimension is the attachment minimum dimension when Note: When the TM series is used, we recommend use of a universal
the shackle is screwed in completely. The attachment is attached in shackle (for tension) to prevent bending load on the load cell.
the range of B to B+0.2 mm. (The shackle screw is rotated back
about half a turn to line up with the shackle position.)

46
Bearing plate (BP), mounting plate (MP), expansion assembly and mounting plate (EA)
Use the bearing plate and mounting plate If you anticipate bending load on the load cell from heat expansion,
when attaching the load cell. use the EA.
Mounting illustration - Bearing plate, Mounting plate Mounting illustration - Expansion assembly (EA), Mounting plate
C 4-øF
C 4-øF D Mounting plate (MP)
D Bearing plate (BP)

E
G

(K)
(K)
A

A
øL

M
E

D
Mounting plate (MP)

G
C
4-øF D
C
Expansion assembly (EA)
4-øF
20 100

10

20 100
10

Weld
50 Weld
50
Unit = mm Unit = mm

Note: The BP-100, MP-100, and EA-100 and higher have handles attached
to their plates.

Intended Bearing Plate and Mounting Plate Dimensions Expansion Assembly (EA) and Mounting Plate Dimensions
load cells Model No. A  C  D E øF G K Net Weight (kg) Model No. A  C  D E øF G øL K M ±N Net Weight (kg)
CP-20L ~ 100L BP-1, MP-1 152 100 77 15 8 15 122 3 EA-1, MP-1 177 100 77 15 8 15 60 122 25 ±8 4
CP-200L ~ 1 BP-1, MP-1 154 100 77 15 8 15 124 3 EA-1, MP-1 179 100 77 15 8 15 60 124 25 ±8 4
CP-2 ~ 5 BP-2, MP-2 213 130 105 23 12 23 167 6 EA-2, MP-2 248 130 105 23 12 23 90 167 35 ±8 8
CP-10 BP-10, MP-10 303 160 125 30 14 30 243 12 EA-10, MP-10 348 160 125 30 14 30 110 243 45 ±10 16
CP-20 BP-20, MP-20 378 200 150 30 14 30 318 18 EA-20, MP-20 443 200 150 30 14 30 130 318 65 ±10 26
CP-30 BP-30, MP-30 480 240 180 40 19 40 400 36 EA-30, MP-30 545 240 180 40 19 40 160 400 65 ±15 46
CP-50 BP-100, MP-110 620 260 200 60 23 60 500 65 EA-100, MP-110 710 260 200 60 23 60 210 500 90 ±15 96
CP-100 BP-210, MP-210 800 360 280 60 27 60 680 130 EA-200, MP-210 905 360 280 60 27 60 300 680 105 ±15 180
C2Z1-500L ~ 2 131 130 105 23 12 23 85 6 166 130 105 23 12 23 90 85 35 ±8 8
BP-2, MP-2 EA-2, MP-2
C2F1-500L ~ 2 151 130 105 23 12 23 105 6 186 130 105 23 12 23 90 105 35 ±8 8
C2Z1-5, 10 170 160 125 30 14 30 110 12 215 160 125 30 14 30 110 110 45 ±10 16
BP-10, MP-10 EA-10, MP-10
C2F1-5, 10 160 160 125 30 14 30 100 12 205 160 125 30 14 30 110 100 45 ±10 16
C2Z1-20 205 200 150 30 14 30 145 18 270 200 150 30 14 30 130 145 65 ±10 26
BP-20, MP-20 EA-20, MP-20
C2F1-20 180 200 150 30 14 30 120 18 245 200 150 30 14 30 130 120 65 ±10 26
C2X1-30, 50 BP-50, MP-50 240 220 160 40 19 40 160 30 EA-50, MP-50 305 220 160 40 19 40 160 160 65 ±15 40
C2X1-100 BP-100, MP-100 310 260 200 60 23 60 190 64 EA-100, MP-100 400 260 200 60 23 60 210 190 90 ±15 86
360 (EA) 280 (EA)
C2X1-200 BP-200, MP-200 390 280 200 80 27 80 230 100 EA-200, MP-200 475 80 27 60 300 230 105 ±15 170
280 (MP) 200 (MP)
400 (EA) 320 (EA)
C2X1-300 BP-300, MP-300 500 280 200 80 35 100 320 110 EA-300, MP-300 585 80 35 60 350 320 125 ±15 222
280 (MP) 200 (MP)
500 (EA) 400 (EA)
C2X1-500 BP-500, MP-500 630 380 280 100 40 130 400 260 EA-500, MP-500 745 100 40 80 430 400 165 ±15 457
380 (MP) 280 (MP)
CMX-50L ~ 2 BP-2-A, MP-2-A 55 130 105 15 12 15 25 4 EA-2, MP-2-A 98 130 105 15 12 23 90 25 35 ±8 7
CMX-5 ~ 20 BP-10, MP-10-A 110 160 125 30 14 30 50 12 EA-10, MP-10-A 155 160 125 30 14 30 110 50 45 ±10 16
N : Permitted movement range

47
Appearance and/or specifications subject to change for improvement without notice.

✽ Load Cells-ADCC-03-ZW3-16103