Title of BSc Final Year Project

(Binding Page)

Authors

Name of Student1 Student1’s Registration Number

Name of Student2 Student2’s Registration Number
Name of Student3 Student3’s Registration Number

Supervisor

Name of Supervisor
Supervisor’s Designation

DEPARTMENT OF CIVIL ENGINEERING

UNIVERSITY OF ENGINEERING AND TECHNOLOGY
TAXILA
Month Year
 Project Title
(Inside First page)

Author

Name of Student1 Student1’s Registration Number

Name of Student2 Student2’s Registration Number
Name of Student3 Student3’s Registration Number

A Project submitted in partial fulfillment of the requirements for the degree of

B.Sc. Civil Engineering

Project Supervisor:

Supervisor Name

Designation & Department

External Examiner Signature:____________________________________________

Project Supervisor Signature:_____________________________________________

DEPARTMENT OF CIVIL ENGINEERING

UNIVERSITY OF ENGINEERING AND TECHNOLOGY
TAXILA

Month Year

i
 Abstract

Project Title

Name of Student1 Student1’s Registration Number

Name of Student2 Student2’s Registration Number
Name of Student3 Student3’s Registration Number

Project Supervisor: Supervisor’s Name

Designation & address

Write abstract from here. The font of the entire document is Times New Roman size 12,

regular, justified except headings. The length of the abstract should not exceed 1 page at

maximum.

Keywords:

ii
 UNDERTAKING

Use the following undertaking as it is.

I certify that research work titled “enter title of your research proposal here” is my own

work. The work has not been presented elsewhere for assessment. Where material has

been used from other sources it has been properly acknowledged / referred.

Signature of Student1

Name of Student1

Registration Number1

Signature of Student2

Name of Student2

Registration Number2

Signature of Student3

Name of Student3

Registration Number3

iii
 ACKNOWLEDGEMENTS

Write acknowledgment here. Use Times New Roman 12, Italic, justified.

iv
 TABLE OF CONTENTS

Sample is given below:

Abstract ............................................................................................………...ii

Acknowledgement..........................................................................................iii

List of Figures.................................................................................................vi

List of Tables..................................................................................................vii

Abbreviations................................................................................................viii

Chapter I: Introduction.....................................................................................1

1.1 Statement of the Problem......................................................................1

1.2 Objectives.............................................................................................3

1.3 Organization of the Project...................................................................3

Chapter II: Overview of xyz scheme…………………………………….........4

v
 LIST OF FIGURES

Sample is given below:

Number Page

Fig 2.1Block diagram of xyz block..................................................................8

Fig 2.2 Basis Functions Diagram.....................................................................9

Fig 2.3 Block Diagram of Codec...................................................................10

Fig 3.1Encoder...............................................................................................13

Fig 3.2 Decoder..............................................................................................14

vi
 LIST OF TABLES

Similar to the list of figures.

vii
 CHAPTER 1

Name of Chapter

1.1 Heading 1

All main headings in Times New Roman font size 14, bold. All the text in Times New

Roman font size12, regular, justified & in double line spacing format.

1.1.1 Subheading 1

All subheadings in Times New Roman font size 12, bold.

1.1.1.1 Subheading 2

1.2 Heading 2

1
 CHAPTER 2

Name of Chapter 2

2.1 Figure Style

All figures should be centrally aligned with captions at bottom of figure.

Fig 2.1: Autumn in Osaka, Japan

2.2 Table Style

All tables should be centrally aligned with captions at the top as sample given below:

Table 2.1: xyz

1
2

2.3 Equations Style

All equations should be centrally aligned with proper numbering. Use Microsoft Word

Equation Editor. E.g.,

V  IR (2.1)

2
 CONCLUSION

Write conclusion of your Project here.

Maximum of 1 page.

3
 REFERENCES

Use following style format for references.

Example Journal Paper:

[1] Didier Le Gall, “MPEG: A video compression standard for multimedia applications,”

Communications ACM, vol. 34, no. 4, pp. 46–58, April 1991.

Example Conference Paper:

[2] Gulistan Raja and M. J. Mirza, “Performance comparison of advanced video coding

H.264 standard with baseline H.263 and H.263+ standards,” in Proc. 4th IEEE

International Symposium on Communications & Information Technologies, ISCIT 04,

Sapporo, Japan, 2004, pp. 743–746.

Example Book:

[3] Iain E.G. Richardson, Video Codec Design, Great Britain, John Wiley & Sons, 2003,

ISBN: xx-yyyy-zzzz.

Example Web Link:

[4] MPEG Software Simulation Group, “The MSSG homepage”, available on-line at

http://www.mpeg.org/MPEG/ MSSG, 2004.

Example Standard:

[5] ITU-T “Video Coding for low bit rate communication,” ITU-T Recommendation

H.263; version 1, Nov 1995; version 2, Jan. 1998; version 3, Nov. 2000.

4
5
 ABBREVIATIONS

Abbreviations should be placed at the end. Sample is given below:

BoUGS: Board of Undergraduate Studies

ENC: Electronics Engineering Department

UET: University of Engineering & Technology

6
 ANNEXURE

Annexure (if any) should be placed at the end of Project report.

Hard Copy Information:

Page Size: A4

Page Margins: Top & Bottom = 1″ and Left & Right = 1.25″

Page orientation: Portrait

Line Spacing: Double

Page Numbering: Bottom Center

Printing: One Side

Note about Binding:

Hard bind copies of the Project along with soft copy in CD are to be submitted for final

year project examination. Hard bound means permanently stitched and bound in BLUE

COVER with the title of the dissertation and your name clearly inscribed on the cover as

per format given at the first page of template in SPLINE color. The SPINE of Project

should be in the following format (B.Sc. Civil Engg., Students registration numbers,

Year of passing) e.g., (B.Sc. Civil Eng. 11-CE-10,11,12 2015 ).