STYROBOND

PASTE TYPE EIFS BASECOAT/ADHESIVE

65210

OVERVIEW
Styrobond is a basecoat and adhesive for the TERRACO EIFS system. It is supplied as a paste to which cement
is added. It shows excellent adhesion between substrate and expanded polystyrene boards when used as an
adhesive. It also provides an excellent basecoat for embedding glass fibre mesh on top of which EIFS finishing
coat is applied.

PROPERTIES APPLICATION & CLEANING OF TOOLS

 Water resistant When used as an adhesive, apply to the EPS
 Excellent adhesion board and press into place using a level. Do not
 Good flexural strength allow adhesive to skin before fixing in place.
 Good impact resistance When used as an embedding mortar apply a coat
 Easy to use of Styrobond mix to the EPS board and embed the
mesh using a trowel. Apply another coat of mix to
AREAS OF USE the surface to ensure full cover of the mesh and an
Styrobond is used as an adhesive between overall thickness of approximately 3mm.
mineral substrates and expanded polystyrene
boards (EPS boards). Styrobond is used as an Clean tools and equipment with water after use.
embedding mortar applied over the EPS boards
to embed the glass fibre mesh prior to application HEALTH & SAFETY
of finish coats. Avoid prolonged contact with eyes and skin. For
detailed information refer to relevant material
MIXING INSTRUCTIONS safety data sheet.
Styrobond is mixed in the following ratio:
25kg Styrobond:25kg cement:1.5-2.0ltr water
PACKAGING & STORAGE
It is mixed using a high speed drill, allowed to
stand for 10 minutes, remixed and used. Product is supplied in 25kg plastic pails.

Store containers in a clean dry area protected

from direct sunlight and extreme heat and cold.
Unopened containers can be stored for 12 months.
Use oldest material first.

TERRACO offers a comprehensive range of products and services for most concrete and finishing needs.
Please contact the TERRACO Technical Service Department or your local TERRACO agent for further
information, samples, demonstrations and instructor services. The information given in this leaflet is based
upon laboratory research, as well as extensive field work and application. All products are sold subject to
standard conditions of sale which are available on request. This information is based on TERRACO’s present
state of knowledge and is intended to provide general information on TERRACO’s products and their
methods of use. The prospective user is recommended to determine the suitability of TERRACO’s suggestions
and products before adopting them on a commercial scale.

For further details visit: www.terraco.com V. 04.2015 - Issued by Terraco Technical Centre, Ireland
 STYROBOND
PASTE TYPE EIFS BASECOAT/ADHESIVE
65210

TECHNICAL DATA
Product Paste type EIFS basecoat/adhesive.
Composition Mixture of fillers, organic binders and additives.
Appearance Off white paste.
Mixing Ratio 25kg Styrobond:25kg cement:1.5-2.0ltr water.
Density of Paste 1.7
Pot Life 4 hours at 25oC
Performance Tests Adhesion to concrete 1.5N/mm2.
Material Consumption 1.7kg/m2/mm thickness.
Packaging 25kg plastic pails.
Storage 12 months in original unopened containers.

For technical enquiries please contact your nearest Terraco representative:

CHINA: PAKISTAN: TURKEY:

Terraco Architectural Coatings China Co., Ltd. Terraco Pakistan Pvt. Ltd. Terraco Yapi Malzemeleri Sanayi Ve Ticaret AS
Tel: +86 (0)20 8759 4742 Tel: +92 (0)42 3529 70 56-8 Tel: +90 (0)222 236 0423
Fax: +86 (0)20 8526 8056 Fax: +92 (0)42 3529 70 55 Fax: +90 (0)222 236 0425
E-mail: [email protected] Email: [email protected] E-mail: [email protected]
Web: www.terraco.com.cn Web: www.terraco.com Web: www.terraco.com.tr

Terraco Chemical (Shanghai) Co., Ltd. RUSSIA: UAE:

Tel: +86 (0)21 621020 48 / 18 OOO Terraco Sweden Ltd, Russia Terraco UAE Ltd
Fax: +86 (0)21 625205 47 Tel: +7 (0)495 9212 237 Tel: +971 (0)4 326 2699
Email: [email protected] Fax: +7 (0)495 6273 881 Fax: +971 (0)4 326 2733
Web: www.terraco.com.cn E-mail: [email protected] E-mail: [email protected]
Web: www.terraco.ru Web: www.terraco.com
EGYPT:
Terraco Egypt Chemical Industries S.A.E. OOO Terraco Vostok Ltd UK:
Tel: +20 (0)22 29184 53 / 57 / 58 Tel: +7 (0)4212 410563 ADDAGRIP
Fax: +20 (0)22 29184 80 Fax: +7 (0)4212 410591 Tel: +44 (0)1825 761 333
E-mail: [email protected] E-mail: [email protected] Fax: +44 (0)1825 768 566
Web: www.terraco.com.eg Web: www.terraco.com E-mail: [email protected]
Web: www.addagrip.co.uk / www,terraco.com
JORDAN: SOUTH KOREA:
Jordan Swedish Polymers Industrial Corp. Terraco Korea Co., Ltd VIETNAM:
Tel: +962 (0)6 553 8751 Tel: +82 (0) 2 5611 551 Terraco Vietnam Co., Ltd
Fax: +962 (0)6 553 6560 Fax: +82 (0)2 5671 771 Tel: +84 (0)650 3 820 100
E-mail: [email protected] E-mail: [email protected] Fax: +84 (0)650 3 820101
Web: www.terraco.jo Web: www.terraco.co.kr E-mail: [email protected]
Web: www.terraco.com
IRELAND: THAILAND:
Terraco Technical Centre, Ireland Terraco Industry (Thailand) Limited
Tel: +353 (0) 1 2819 045 Tel: +66 (0)2 946 68 56 / 58
Fax : +353 (0) 1 2819 048 Fax: +66 (0)2 946 68 59
E-mail: [email protected] E-mail: [email protected]
Web: www.terraco.com Web: www.terraco.com

For further details visit: www.terraco.com V. 04.2015 - Issued by Terraco Technical Centre, Ireland