List of mandatory spare parts for dredgers against 2 lots (package Lot - 2 & Lot-3) under

Bangladesh Water Development Board.

Description of Spare parts
Name of Component Unit Quty Remark
Part No. Name of Spare parts
1. Dredge Pump: GIW 22 × 24 LSA- 1 Pump Casing No. 1
054. SL No. 5012-15807. Georgia 2 Impeller No. 3
Iron Works, USA.
3 Pump Shaft- set complete with bearings & set 1
seals.
4 Gland seal set 4
5 Wearing plates, inner No. 2
6 Wearing plate, outer No. 4
7 Suction Nozzle No. 4
8 Thrust Ring No. 4
9 Bolts,, nuts, screws, gaskets Change 3
set
10 Kit of Wear resist coating (5kg pack) Kg 200
2. Gland Pump: ITT, SL No. 1 Complete Pump Set 1
793F418, Size: 2 x 2 -10, Flow GPM 2 Expansion pieces, impeller, bearings, Set 4
80, RPM-3550, IMP DIA-10, MAX seals, bolts & nuts
DIA-10, Goulds Pumps Frame.

3. Raw cooling water pump: Pump: 1 Complete Pump Set 1

ITT Model: 3796, Size- 4x4-10, 2 Expansion pieces, impeller, bearings, Set 4
RPM-1456, SL No.793F380 seals, bolts & nuts

4. Dredge pump gearbox: i) Elli Cott 1 Shaft seals Set 2

dredse pump drive, SL No. 401225, 2 Set of Pressure plates completes Set 2
Input: RPM-1400/1600, Output
RPM-385/440, Service Rating 2447 3 Filter element No. 12
HP, Service Factor-1.75. ii) Elli Cott 4 Pressure relief valve No. 3
dredse pump drive, SL No. 401223, 5 Sensors & Gauges No. 3
Input: RPM-1400/1600, Output
RPM-1400/1600, Service Rating
2447HP, Service Factor-1.75.

5. Cutter drive motor: Ellicott 1 Set of seals Set 2

dredser LLc 3870 cutter Head Drive
Assy, Item:#151925, IND. No- A56P
01568.

6. Cutter: 1 Cutting edge complete set Set 4

7. Suctiong hose: 1 Hosw sith fitting bolts & nuts, gaskets etc. Set 2 Not
complete Applicable

8. Fuel Line water Separator: 1 Water separator complete set Set 1

2 Filter element Set 50
9. Main Engine (Dredge Pump 1 Filter element
drive): CATERPILLER. 16 Cyllinder, a) Fuel filter Set 60
V-Type, Model: 3516C, SL No.
TTH00523 b) Oil filter Set 60
c) Air filter Set 60
2 Turbocharger cartridge assy Set 1
drive): CATERPILLER. 16 Cyllinder,
V-Type, Model: 3516C, SL No.
TTH00523

3 Top overhauling gasket kit for complete Set 1

engine
4 Exhaust & Inlet valves, including lock, Set 1
spring, guide, rotocoil, seal valve etc.for
complete engine.
5 Piston assy for complete engine. Set 1
6 Piston Ring assy for complete engine. Set 1
7 Cylinder Liner assy for complete engine. Set 1
8 Unit Fuel injectors assy for complete Set 1
engine with washers etc.
9 Injector tube ( if applicable) with washer for Set 1
complete engine.
10 Cooling water pump repair kit Set 2
11 Cooling water pump complete Set 1
12 Regulator water temperature complete. Set 1
13 Inhibitor/coolant-sufficient Change 5
Set
14 Cooling system Hoses and hose clamps Set 2

15 Fuel lines Set 1

16 For starting system, brush assy., solenoid, Set 3
bushing, drive assy
17 Manometers & Gaugers, set of each type Set 2
fitted.
18 Control panel accessories ( Name of item Set 2
to be mentionned by the Tenderer)

10. Auxiliary Engine (auxiliary 1 Filter element

drive): CATERPILLER. Model: C32 a) Fuel filter Set 60
ACRT
b) Oil filter Set 60
c) Air filter Set 60
2 Top overhauling gasket kit for complete Set 2
engine
3 Exhaust & Inlet valves, including lock, Set 1
spring, guide, rotocoil, seal valve etc for
complete engine.
4 Piston assy. for complete engine. Set 1
5 Piston Ring assy.for complete engine. Set 1
6 Cylinder Liner assy for complete engine. Set 1
7 Unit Fuel injectors assy for complete Set 1
engine with washers etc.
8 Injector tube ( if applicable) with washer for Set 1
complete engine.
9 Cooling water pump repair kit Set 2
10 Inhibitor/coolant-sufficient. Set 5
11 Cooling system Hoses and hose clamps. Set 2

12 Fuel lines. Set 1

13 For starting system, brush assy., solenoid, Set 3
bushing, drive assy.
14 Turbocharger cartridge assy Set 1
11. Hydraulic System: KPM 1 Hydraulic pump complete of each type Set 1
England fitted in the dredger.
2 Sensors and relays for each type Set 3
installed.
11. Hydraulic System: KPM
England

3 Repair kit including cartridges for Set 2

hydraulic pumps for each type of
pumps fitted.
4 Flow control valves, safety valves, Set 2
direction valve, non-return valves,
valve blocks etc., set of each type
installed.
5 Solenoid for valve, set of each type Set 2
installed
6 O-ring, gaskets, bolts, screws etc. Set 3
7 Manomenters & Gauges, set each type Set 1
fited.
8 Filter element
a) if metallic or Set 3
b) if paper type. Set 60
12. Electrical System 1 Fuses of each size used-20 nos. each Set 40
type & size.
2 Relays, sensors etc.each type and Set 6
size.
3 Switches each type & size. Set 3
4 lamps, bulbs etc. each type and size. Set 6

5 Lamp holders each type & size. No. 6

6 Circuit Breakers each type and rating. Set 3

7 Joystick controller each type & size. No. 1

13. Harbour Generator: 1 Engine filter elements, set of each type & Set 12
CATERPILLER, Model: C4.4DIT, Sl size.
No. JIZ05577, RPM-1500, Power:
75.6HP/56.4KW,

14. Other System 1 Wire rope for ladder hoist Change 2

Set
2 Wire rope for side wire-5 change Change 4
length. Set
3 Wire rope for spud operation-3 change Change 2
length. Set
4 Wire rope for anchor boom-3 change Change 2
length. Set
5 Wire sheave with bushing, each size Change 4
each. Set
6 Sea water coolers-repair kit & gaskets Change 2
Set

Note: Quantities shown in the coloum is for single lot