Scribd
Upload
194 views7 pages

Z31 300ZX - PastPower Innovations Polyurethane Transmission Mount (DT056-0002)

This 3-sentence summary provides an overview of the key points from the installation guide document: The document provides instructions for installing a polyurethane transmission mount kit, noting the kit contents, recommended tools, and installation process which involves removing the stock isolator and exhaust then bolting the new polyurethane mount between the transmission and cross-member using included hardware. Proper safety precautions and consultation of factory manuals is advised when performing any mechanical work on one's vehicle.

Uploaded by

Zack Barnett
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
194 views7 pages

Z31 300ZX - PastPower Innovations Polyurethane Transmission Mount (DT056-0002)

This 3-sentence summary provides an overview of the key points from the installation guide document: The document provides instructions for installing a polyurethane transmission mount kit, noting the kit contents, recommended tools, and installation process which involves removing the stock isolator and exhaust then bolting the new polyurethane mount between the transmission and cross-member using included hardware. Proper safety precautions and consultation of factory manuals is advised when performing any mechanical work on one's vehicle.

Uploaded by

Zack Barnett
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Polyurethane Transmission Mount Kit

Installation Guide

Installation Guide
PastPower Innovations
Polyurethane Transmission Mount Kit

WWW.PASTPOWERPARTS.COM 1
Polyurethane Transmission Mount Kit
Installation Guide

Caution:
The Installation of this product requires detailed knowledge of automotive
components. We recommend that the installation of this product be carried
personnel that are qualified to perform the task.

Any responsibility or damages due to correct or incorrect installation, or


production defects shall be placed solely on the end user.

When performing any mechanical work on your vehicle, ensure that proper eye
protection and other safety apparel deemed necessary is worn. As always be
careful when working around gasoline or any fuel system components

WARNING!
Improper installation of this kit can cause severe injury or even death.

WWW.PASTPOWERPARTS.COM 2
Polyurethane Transmission Mount Kit
Installation Guide

What’s In the Box:


1x Polyurethane Isolating Mount
3x Serrated Flanged Nuts
3x Toothed Flush-Head Studs

WWW.PASTPOWERPARTS.COM 3
Polyurethane Transmission Mount Kit
Installation Guide

Recommended Tools:
Pair of Jack Stands
Floor Jack
Basic Hand tools
14mm & 17mm sockets or wrenches

WWW.PASTPOWERPARTS.COM 4
Polyurethane Transmission Mount Kit
Installation Guide

Before You Begin


Congratulations on your purchase of this Polyurethane Transmission Mount Kit
from us at PastPower Innovations!

Before you begin the installation process, confirm that the kit has arrived with all
the necessary components to complete the installation. If you are the original
purchaser of this kit, and any component listed in “What’s In the Box” are missing,
please contact PastPower Innovations to receive the necessary parts.

Before beginning any work on your vehicle, it is highly advisable to first consult
the Factory Service Manual (FSM) for proper removal and installation of factory
components.

WWW.PASTPOWERPARTS.COM 5
Polyurethane Transmission Mount Kit
Installation Guide

Installation Procedure
(Estimated Time of Completion: 2 hours)

Removal of the exhaust is required before removing the stock isolator and
will probably take longer than the installation of the kit. See FSM for proper
exhaust removal procedure. The transmission cross-member and harmonic
damper are attached as a unit by two 17mm bolts which run through the bushings
on the damper. The transmission isolator itself bolts between the damper bar and
transmission.

Once you have removed the exhaust, the transmission cross-member


should be clearly visible. The process for removal of the stock isolator and
installation of your new high-performance polyurethane unit is as follows:

1. Support the transmission in front of the cross-member on a jack or jack stand.


2. Loosen the two (2) 17mm bolts that connect the “damper bar” to the cross-
member.
3. Loosen the four (4) 14mm bolts that hold the transmission cross-member to
the vehicle.
4. Remove the two (2) 17mm bolts and remove the transmission cross-member.
5. Locate the 14MM center nut that secures the damper to the isolator, and
loosen it. Be careful not to allow the damper to fall and injure yourself.
6. Remove the two (2) 14mm nuts that secure the isolator to the transmission
case.
7. Remove the transmission isolator and the bolts from the transmission case

WWW.PASTPOWERPARTS.COM 6
Polyurethane Transmission Mount Kit
Installation Guide

Stock vs. High Performance Poly

Installation of the new unit is almost exactly the reverse of removal of the
stock unit. Take note of the fact that you need to install the isolator to the
transmission before mounting the harmonic damper to the isolator. If good
transmission fitment requires it, flatten an edge of each washer for case clearance
if it’s not already done for you.

Install the serrated flanged nuts and use a stubby wrench to tighten them
down to a rough torque between 8-12lb/ft. You will notice the mount deform
very slightly, this is normal. Do not tighten any further than this; the nuts will stay
in place on their own. Tightening down these nuts is probably the hardest part of
the installation. Do not over-torque these nuts; excessive torque is not required
to obtain proper function of the isolator! Re-install the transmission cross-
member and exhaust system, take the car for a spin and try it out!

WWW.PASTPOWERPARTS.COM 7

You might also like