Scribd
Upload
64 views

Performance Enhancement in Mpls Network Using Resource Reservation Protocol - Te

This document discusses using Resource Reservation Protocol (RSVP) to enhance performance in MPLS networks. MPLS Traffic Engineering automatically establishes and maintains Label Switched Paths across the backbone using RSVP. RSVP reserves bandwidth along a path from source to destination and provides reservation styles to fit varied applications. It is used in single service provider networks and can minimize packet loss and network traffic. The existing MPLS system has drawbacks like underutilized links and packet loss due to heavy traffic. The proposed system aims to address these issues using RSVP.

Uploaded by

Sudalai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views

Performance Enhancement in Mpls Network Using Resource Reservation Protocol - Te

This document discusses using Resource Reservation Protocol (RSVP) to enhance performance in MPLS networks. MPLS Traffic Engineering automatically establishes and maintains Label Switched Paths across the backbone using RSVP. RSVP reserves bandwidth along a path from source to destination and provides reservation styles to fit varied applications. It is used in single service provider networks and can minimize packet loss and network traffic. The existing MPLS system has drawbacks like underutilized links and packet loss due to heavy traffic. The proposed system aims to address these issues using RSVP.

Uploaded by

Sudalai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

PERFORMANCE ENHANCEMENT IN MPLS NETWORK

USING RESOURCE RESERVATION PROTOCOL -TE

Guided by: Presented by:


ABSTRACT

MPLS VPN is the internet/intranet connection of the


customer to customer who are geographically separated.

To enable the continuity of services, the VPN information


has to be distributed across the service providers network.

MPLS Traffic engineering automatically establishes and


maintains Label Switched Paths across the backbone,
using Resource Reservation Protocol (RSVP).

RSVP is implemented in single service provider networks


and we can reduces the packet loss and network traffic.
INTRODUCTION
MPLS traffic engineering is an application of
MPLS which gives network to use all the
available links in the network optimally.

The large number of internet users and


various data traffic types, Internet Service
Providers (ISP) face a challenge in the form
of traffic engineering.

Traffic is forwarded along the path defined


as per the TE tunnel by using MPLS label
switching.
LITERATURE SURVEY

Performance Analysis of MPLS Network with Traditional


IP Network in Service Provider Environment.

Algorithm: Label Distribution Protocol (LDP)

DRAWBACK:
▪ Links which are less used was a major issue in which one best
route was over used for heavy network traffic.

▪ Other routes were less used which results in wastage of


bandwidth.

▪ Packet loss and delay.


LITERATURE SURYVE

Internet Traffic Engineering Using Multiprotocol


Label Switching.

Algorithm: Resource Reservation Protocol (RSVP)

DRAWBACK:
▪ Tunnels are unidirectional.

▪ Capital expenditure is high.

▪ Complicated network management system (NMS).


EXISTING SYSTEM
MPLS VPN is the internet/intranet connection of the customer
to customer who are geographically separated.

Data is forwarded between customer to customer using the


MPLS-enabled Service Provider IP backbone.

Telecom Service providers are not have the license to operate


in al the locations.

MPLS VPN circuits are interconnected from one Service


providers to another Service providers by using Border
Gateway Protocol (BGP).

Customer need not worry about the geographical locations.


They can get MPLS VPN service any time anywhere.
EXISTING SYSTEM
DRAWBACK:
1. All the MPLS routes are not utilized to their bandwidth
capacity.
2. Packet loss due to customer’s heavy traffic.
3. Packet flows end to end in a single path only.
4. Less Quality of Service (QoS).

ADVANTAGE:
1.Interprovider MPLS VPNs are highly benefit for corporate
customer who are having their branches across the
country.
2.e-BGP protocol has several advantages for connecting
one service provider to another service provider
PROPOSED SYSTEM:

MPLS Traffic engineering automatically establishes and


maintains Label Switched Paths across the backbone, using
Resource Reservation Protocol(RSVP).

RSVP reserves bandwidth along a path from a specific


source to destinaion.

RSVP provides several reservation styles and allows for


future styles to be added to protocol revisions to fit varied
applications.

RSVP is used in a Single Service Provider Networks. It will


minimize the packet loss and network traffic.
REFERENCE:
1. Vassilis foteinos et al.,”Operator friendly traffic engineering in MPLS /IP
core networks”,2014 IEEE. Personal use is permitted, but republication/
redistribution requires IEEE
permission,http://www.ieee.org/publication-standards/ publications/
rigths/ index.html for more information.

2.Tejender singh Rawat et al.,”A Review paper on MPLS VPN architecture”,


www.ijetmas.com May 2015,Volume 3,Issue 5,ISSN 2349-4476.

3. B.Fortz J.Rexford, and manage., M.Thorup,”traffic engineering with


traditiona IP routing protocols,”IEEE
commun.mag.,vol.40,no.10,PP.118-124,oct 2002.

4. N.Wang,K.Ho,G.Pavlou,and M.Howarth,” A Overview of routing


optimization or internet traffic engineering”., IEEE common surveys
THANK YOU

You might also like