1 2 3 4 5 6 7 8 9 10 11 12

NOTES: -
1. DO NOT SCALE THE DRAWING. FOLLOW FIGURED DIMENSIONS ONLY. 22. IN BEAMS & SLABS, OVERLAPPING SHALL NOT BE PROVIDED OVER SUPPORTS FOR
H
2. THIS DRAWING SHALL BE READ ALONG WITH ARCHITECTURAL PLAN. TOP BARS AND AT MID SPAN FOR BOTTOM BARS. H

SALIENT FEATURES :- 23. LAPS SHALL BE STAGGERED AND LAP LENGTHS ARE FOR TENSION &
3. THE STRUCTURE IS DESIGNED FOR GROUND FLOOR ONLY. COMPRESSION. L = Lap

4. FLOOR TO FLOOR HEIGHT : AS PER ARCHITECTURAL PLAN. > 150mm

5. SBC OF SOIL IS CONSIDERED AS 150 KN/Sqm AT 2.00m BELOW NGL.
6. GRADE OF STEEL SHALL BE Fe:500.
7. GRADE OF CONCRETE : M-20 DESIGN MIX FOR ALL RCC MEMBERS. L = Lap

G < 1.3 L G
8. SEISMIC ZONE - II AND BASIC WIND SPEED OF 44m/s ARE CONSIDERED WHILE DESIGNING L/3 L/3

THE STRUCTURE. L = Lap

STAGGERING OF LAP. SPLICE
GROUND FLOOR. BINIDING WIRE LAP. SPLICE IN BEAM
10. NOMINAL COVER :- 24. ALL PROVISIONS OF IS 456 : 2000, SP - 34, SHALL INVARIABLY BE FOLLOWED.
S.No ITEMS MM M20 GRADE
1 FOOTINGS 50
F F
2 COLUMNS 40
3 BEAMS 28 WIRED COVER BLOCK
4 SLABS 20 (NOTE No:10) as per Beam details
Standard hook
11. ANY LOOSE (or) PROTRUDING BOULDERS SHALL BE REMOVED BEFORE LAYING FOUNDATION as per SP - 34

CONCRETE AND SHALL BE FILLED WITH PCC (1:4:8).

12. WHEREVER NECESSARY DRILLING SHALL BE RESORTED TO, IN HARD SHEET ROCK ONLY.
E 13. THE DIFFERENCE IN LEVEL OF TWO ADJACENT FOOTINGS SHOULD NOT BE GREATER THAN SECTION 1-1 E

HALF THE CLEAR DISTANCE BETWEEN THEM. (NOTE No:15)

14. NOT MORE THAN 50% OF COLUMN REINF. SHALL BE LAPPED AT A PARTICULAR LOCATION.
15. STIRRUPS SHOULD HAVE STANDARD HOOK AS PER SP-34.
LEGEND :
16. CONCRETE LAID IN THE FORM WORK SHALL INVARIABLY VIBRATED TO OBTAIN MAX. DENSITY
AND COMPACTION DURING EXECUTION. 1. d : Effective depth of beam.
2. Leff : Center to Center
D
17. STRIPPING TIME OF FORM WORK SHALL CONFORM TO CLAUSE 11.3 OF IS:456-2000. distance of Columns D
18. CURING SHOULD BE DONE AT LEAST FOR 21 DAYS. 3. Db : Dia of bar.
4. Ld :
BEAMS :-
5. AGL : Average Ground Level.
19. WHEREVER REINFORCEMENT IS PROVIDED IN TWO LAYERS IN BEAMS SPACER BAR SHALL BE 6. NGL : Natural Ground Level.
PROVIDED TO MAINTAIN 25mm GAP (or) MAXIMUM DIA. OF MAIN BAR, WHICH EVER IS MORE, 7. FFL : Finished Floor Level.
8. FGL : Finished Ground Level.
BETWEEN TWO LAYERS. 9. TOC : Top of Concrete.
20. WHEN SPAN IS MORE THAN 6.0m, PROVIDE A CAMBER OF SPAN/250 FOR BEAMS & SLABS. 10. TOS : Top of Slab.
C 11. B/W : Both ways. C
21. EXTRA BARS AT TOP FOR BEAM SHALL BE EXTENDED UPTO 0.25L ON EITHER SIDE FROM THE 12. E/F : Each Face.
FACE OF SUPPORT. WHERE `L' IS c/c OF SUPPORTS. THE CURTAILMENT OF BOTTOM BARS
AT 0.1 L FROM DISCONTINUOUS EDGE AND O.15 L FROM CONTINUOUS EDGE FROM CENTRE
OF SUPPORT.
0.25L1 0.25L1 0.25L2 0.25L2

B B
Ld

Ld

NAME OF WORK:- CONSTRUCTION OF

0.1L1 0.15L1 0.15L2 0.1L2
L1 L2 RYTHU VEDIKA WORK SHED
TYPICAL DETAILS OF A BEAM
Drg. Title : GENERAL NOTES REV
A (RO) A

Drg. No. : SD-01

1 2 3 4 5 6 7 8 9 10 11 12