Green engineering

Green engineering approaches the design of products and processes by applying financially and technologically feasible processes
and products in a manner that simultaneously decreases the amount of pollution that is generated by a source, minimizes exposures to
potential hazards (including reducing toxicity and improved uses of matter and energy throughout the life cycle of the product and
processes) as well as protecting human health without relinquishing the economic efficiency and viability.[1] As such, green
engineering is not actually anengineering discipline in itself, but an overarching engineering framework for all design disciplines.

Contents
1 Principles
2 Systems approach
3 See also
4 References
5 External links

Principles
Green engineering adheres to nine guiding principles. A designer must strive to:

1. Engineer processes and products holistically , use systems analysis, and integrate environmental impact assessment
tools.
2. Conserve and improve natural ecosystems while protecting human health and well-being.
3. Use life-cycle thinking in all engineering activities.
4. Ensure that all material and energy inputs and outputs are as inherently safe and benign as possible.
5. Minimize depletion of natural resources.
6. Strive to prevent waste.
7. Develop and apply engineering solutions, while being cognizant of local geography , aspirations, and cultures.
8. Create engineering solutions beyond current or dominant technologies; improve, innovate, and invent (technologies)
to achieve sustainability.
[2][3]
9. Actively engage communities and stakeholders in development of engineering solutions.
The American Chemical Societyhas expanded these to twelve principles:

1. Inherent Rather Than Circumstantial – Designers need to strive to ensure that all materials and energy inputs and
outputs are as inherently nonhazardous as possible.
2. Prevention Instead of Treatment – It is better to prevent waste than to treat or clean up waste after it is formed.
3. Design for Separation – Separation and purification operations should be designed to minimize energy consumption
and materials use.
4. Maximize Efficiency – Products, processes, and systems should be designed to maximize mass, energy , space, and
time efficiency.
5. Output-Pulled Versus Input-Pushed – Products, processes, and systems should be "output pulled" rather than "input
pushed" through the use of energy and materials.
6. Conserve Complexity – Embedded entropy and complexity must be viewed as an investment when making design
choices on recycle, reuse, or beneficial disposition.
7. Durability Rather Than Immortality – Targeted durability, not immortality, should be a design goal.
8. Meet Need, Minimize Excess – Design for unnecessary capacity or capability (e.g., "one size fits all") solutions
should be considered a design flaw.
9. Minimize Material Diversity – Material diversity in multicomponent products should be minimized to promote
disassembly and value retention.
10. Integrate Material and Energy Flows – Design of products, processes, and systems must include integration and
interconnectivity with available energy and materials flows.
11. Design for Commercial "Afterlife" – Products, processes, and systems should be designed for performance in a
commercial "afterlife."
[4]
12. Renewable Rather Than Depleting – Material and energy inputs should be renewable rather than depleting..

Systems approach
To varying extents, all engineering disciplines engage in green engineering. This includes sustainable design, life cycle analysis
(LCA), pollution prevention, design for the environment (DfE), design for disassembly (DfD), and design for recycling (DfR). As
such, green engineering is a subset of sustainable engineering. Green engineering involves four basic approaches to improve
processes and products to make them more efficient from an environmental standpoint.[5]

1. Waste reduction;
2. Materials management;
3. Pollution prevention; and,
4. Product enhancement.
Green engineering approaches design from a systematic perspective, which means that numerous professional disciplines must be
integrated. In addition to all engineering disciplines, green engineering includes land use planning, architecture, landscape
architecture, and other design fields, as well as the social sciences(e.g. to determine how various groups of people use products and
services. Designers have always been concerned with space. Architects consider the sense of place. Engineers view the site map as a
set of fluxes across the boundary. Planners consider the combinations of these systems over larger regions, e.g. urban areas. The life
cycle analysis is an important green engineering tool, which provides a holistic view of the entirety of a product, process or activity,
encompassing raw materials, manufacturing, transportation, distribution, use, maintenance, recycling, and final disposal. In other
words, assessing its life cycle should yield a complete picture of the product. The first step in a life cycle assessment is to gather data
on the flow of a material through an identifiable society. Once the quantities of various components of such a flow are known, the
important functions and impacts of each step in the production, manufacture, use, and recovery/disposal are estimated. Thus, in
[6]
sustainable design, engineers must optimize for variables that give the best performance in temporal frames.

The systems approach employed in green engineering is similar to value engineering (VE). Daniel A. Vallero considers green
engineering to be a form of VE because both systems require that all elements and linkages within the overall project be considered
to enhance the value of the project. Every component and step of the system must be challenged. Ascertaining overall value is
determined not only be a project's cost-effectiveness, but other values, including environmental and public health factors. Thus, the
broader sense of VE is compatible with and can be identical to green engineering, since VE is aimed at effectiveness, not just
efficiency, i.e. a project is designed to achieve multiple objectives, without sacrificing any important values. Efficiency is an
engineering and thermodynamic term for the ratio of an input to an output of energy and mass within a system. As the ratio
approaches 100%, the system becomes more efficient. Effectiveness requires that efficiencies be met for each component, but also
that the integration of components lead to an effective, multiple value-based design.[7] Green engineering is also a type of concurrent
engineering, since tasks must be parallelized to achieve multiple design objectives.

See also
Civil engineering
Ecotechnology
Environmental engineering
Environmental engineering science
Environmental technology
Exposure assessment
Green building
Hazard (risk)
Risk assessment
Systems engineering
References
1. U.S. Environmental Protection Agency (2014), Green Engineering.http://www.epa.gov/oppt/greenengineering/
2. Green Engineering: Defining the Principles Conference, Sandestin, Florida, May 2003.
3. P.T. Anastas and J.B. Zimmerman (2003). Design through the Twelve Principles of Green Engineering. Env
. Sci. and
Tech., 37, 5, 94A-101A.
4. American Chemical Society (2014). 12 Principles of Green Engineering.
http://www.acs.org/content/acs/en/greenchemistry/what-is-green-chemistry/principles/12-principles-of-green-
engineering.html.
5. D. Vallero and C. Brasier (2008), SustainableDesign: The Science of Sustainability and Green Engineering. John
Wiley and Sons, Inc., Hoboken, NJ,ISBN 0470130628.
6. D. Vallero and C. Brasier (2008).
7. D. Vallero (2003). Engineering the Risks of Hazardous Wastes. Butterworth-Heinemann, Amsterdam, Netherlands
and Boston MA, ISBN 0750677422.

External links
U.S. EPA (2014). "Green Engineering".http://www.epa.gov/oppt/greenengineering/pubs/basic_info.html
Vanegas, Jorge (2004). "Sustainable Engineering Practice – An introduction". ASCE publishing.
Antalya, Turkey, (1997). "XI World Forestry Congress", (Volume 3, topic 2), retrieved from
http://www.fao.org/forestry/docrep/wfcxi/publi/v3/T12E/2-3.HTM
http://www.sustainableengineeringdesign.com
https://engineering.purdue.edu/EEE/Research/Areas/sustainable.html
http://www7.caret.cam.ac.uk/sustainability.htm
http://www.aaas.org/programs/international/caip/events/fall97/sanio.html

Retrieved from "https://en.wikipedia.org/w/index.php?title=Green_engineering&oldid=797338177

This page was last edited on 26 August 2017, at 12:04.

Text is available under theCreative Commons Attribution-ShareAlike License ; additional terms may apply. By using this
site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of theWikimedia
Foundation, Inc., a non-profit organization.