Scribd
Upload
65 views1 page

Model All Ports Blocked Cavity Plug: Series 2 / Cavity: T-3A

This document summarizes the technical specifications of a cavity plug model XCCA. The plug blocks all ports in cavity T-3A of Series 2. It has a maximum operating pressure of 5000 psi and a 2 port valve configuration. Seal kit options include Buna, EPDM, polyurethane and Viton materials. The plug weighs 0.41 lb and configuration options specify the control type, adjustment range and seal/material coating.

Uploaded by

Marcelo Partes de Oliveira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views1 page

Model All Ports Blocked Cavity Plug: Series 2 / Cavity: T-3A

This document summarizes the technical specifications of a cavity plug model XCCA. The plug blocks all ports in cavity T-3A of Series 2. It has a maximum operating pressure of 5000 psi and a 2 port valve configuration. Seal kit options include Buna, EPDM, polyurethane and Viton materials. The plug weighs 0.41 lb and configuration options specify the control type, adjustment range and seal/material coating.

Uploaded by

Marcelo Partes de Oliveira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MODEL All ports blocked cavity plug

XCCA SERIES 2 / CAVITY: T-3A

snhy.com/XCCA

This cavity plug blocks all ports.

TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

Cavity T-3A
Series 2
Maximum Operating Pressure 5000 psi
Port Configuration 2 Port
Valve Hex Size 1 1/8 in.
Valve Installation Torque 45 - 50 lbf ft
Seal kit - Cartridge Buna: 990203007
Seal kit - Cartridge EPDM: 990203014
Seal kit - Cartridge Polyurethane: 990003002
Seal kit - Cartridge Viton: 990203006
Model Weight 0.41 lb.

CONFIGURATION OPTIONS Model Code Example: XCCAXXN


CONTROL (X) ADJUSTMENT RANGE (X) SEAL MATERIAL (N) MATERIAL/COATING
X - X - N Buna-N Standard Material/Coating
E EPDM /AP Stainless Steel, Passivated
V Viton /LH Mild Steel, Zinc-Nickel

TECHNICAL FEATURES
Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage
the seals.
Corrosion resistant cavity plugs are intended for use in corrosive environments and are identified by the model code suffix /AP (see CONFIGURATION section). The
bodies of these plugs are made from high strength lean duplex stainless steel. Internal parts are made from carbon steel leaded alloy, the same as standard plugs.

c 2019 Sun Hydraulics


1 of 1

You might also like