Scribd
Upload
92 views1 page

Technical Report: Sharp Corporation

This technical report summarizes a ROM version upgrade for the MX-RB18 digital copier option. It describes: 1. The model and description of the upgrade from ROM version 01.01.02.00 to a new version from July 2013 production. 2. Details of the change to fix a potential issue where incorrect trouble could be detected due to noise in the decurler transport motor. 3. The new and current parts numbers for the control PWB and that the upgrade can support both the current and new PWB.

Uploaded by

phu polyfax
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views1 page

Technical Report: Sharp Corporation

This technical report summarizes a ROM version upgrade for the MX-RB18 digital copier option. It describes: 1. The model and description of the upgrade from ROM version 01.01.02.00 to a new version from July 2013 production. 2. Details of the change to fix a potential issue where incorrect trouble could be detected due to noise in the decurler transport motor. 3. The new and current parts numbers for the control PWB and that the upgrade can support both the current and new PWB.

Uploaded by

phu polyfax
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Date : Oct.

1, 2013

DIGITAL COPIER(OPTION) : MX-RB18 No. : HRE-088

Technical Report

ROM VERSION UPGRADE ..... (1).

1. Model Name: MX-RB18 (Option for MX-M904/M1054/M1204)

2. Description: ROM version will be upgraded


From July 2013 production
ROM Control No Version
A11 01.01.02.00
Item of change:
1. Decurler transport motor mounted to Curl Correction Unit (MX-RB18) may detect incorrect
trouble (F1-96 error) due to noise etc. Modification has been implemented so that such
incorrect trouble (F1-96 error) is not detected due to noise etc.
Note) Due to the ROM upgrade, the parts code of the control PWB has been changed but it is
possible to support by the ROM upgrade of the control PWB before the change, and
therefore it is not necessary to replace with the control PWB after the change.

3. Parts Action:
Current parts New parts Inter-
Ref. Model Price Effective
Version P/G No. Q’ty Parts name change-
No. name rank time
Parts code Parts code ability

1 MX-RB18 ALL 9-63 0CW4G509640// 0CW4G50964009 CG 1 PBA CONT 2013/7 3

<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. 5. Interchangeable if replaced with same types of
New type cannot be used in place of current type. related parts in use.
3. Current type cannot be used in place of new type.
6. Others.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.

1/1
SHARP CORPORATION Document Systems Division C

You might also like