Scribd
Upload
38 views

Memoria Samet Simple

This document contains properties and calculations for a structural steel member called PC-03-G. It provides key dimensions and material properties of the cross section. It also calculates section properties like moment of inertia, section modulus, and radius of gyration. Nominal and design strengths are determined for bending and flexure. Verification checks are performed and confirm the section is adequate based on required internal forces.

Uploaded by

Juan Emanuel Venturelli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Memoria Samet Simple

This document contains properties and calculations for a structural steel member called PC-03-G. It provides key dimensions and material properties of the cross section. It also calculates section properties like moment of inertia, section modulus, and radius of gyration. Nominal and design strengths are determined for bending and flexure. Verification checks are performed and confirm the section is adequate based on required internal forces.

Uploaded by

Juan Emanuel Venturelli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Autodesk Robot Structural Analysis Professional 2017

Author: Juan Emanuel Venturelli File: Samet.rtd


Address: Project: Perfil "C" Samet PC-03-G

Symbol Values Unit Symbol description Section

MEMBER: PC-03-G

Cross-section properties: PC-03-G 44x44x2.5

Ax 377.424 mm2 Cross-section area


Ay 133.338 mm2 Shear area - Y-axis
Az 214.182 mm2 Shear area - Z-axis
J 809.132 mm4 Torsional constant
Iy 90839.288 mm4 Moment of inertia of a section about the Y-axis
Iz 117060.882 mm4 Moment of inertia of a section about the Z-axis
Zy 5343.588 mm3 Plastic section modulus about the Y (major) axis
Sy 3788.990 mm3 Elastic section modulus about the Y-axis
Zz 6297.468 mm3 Plastic section modulus about the Z (minor) axis
Sz 5320.949 mm3 Elastic section modulus about the Z-axis
d 44.00 mm Height of cross-section
bf 44.00 mm Width of cross-section
tf 0.00 mm Flange thickness
tw 0.00 mm Web thickness
ry 15.51 mm Radius of gyration - Y-axis
rz 17.61 mm Radius of gyration - Z-axis

Material:

Name STEEL
Fy 180.00 MPa Specified minimum yield strength of material
Fu 300.90 MPa Specified minimum tensile strength
E 199948.02 MPa Longitudinal elasticity coefficient

Partial factor method LRFD

Fib 0.90 Resistance factor for flexure [F1.(1)]

Local buckling

Lamf 0.00 Width-To-Thickness ratio for a flange [Table B4.1a,b]


Lamw 0.00 Width-To-Thickness ratio for a web [Table B4.1a,b]
Section class for simple bending (My moment)
Lamf_p_My 12.67 Limiting slenderness for compact flange [Table B4.1b]
Lamf_r_My 32.99 Limiting slenderness for noncompact flange [Table B4.1b]
ClassF_My Compact Flange class [Table B4.1b]
Lamw_p_My 125.32 Limiting slenderness for compact web [Table B4.1b]
Lamw_r_My 189.98 Limiting slenderness for noncompact web [Table B4.1b]
ClassW_My Compact Web class [Table B4.1b]
Section class for simple bending (Mz moment)
Lamf_p_Mz 12.67 Limiting slenderness for compact flange [Table B4.1b]
Lamf_r_Mz 32.99 Limiting slenderness for noncompact flange [Table B4.1b]
ClassF_Mz Compact Flange class [Table B4.1b]
Lamw_p_Mz 125.32 Limiting slenderness for compact web [Table B4.1b]
Lamw_r_Mz 189.98 Limiting slenderness for noncompact web [Table B4.1b]
ClassW_Mz Compact Web class [Table B4.1b]

Date : 24/06/20 Page : 1


Autodesk Robot Structural Analysis Professional 2017
Author: Juan Emanuel Venturelli File: Samet.rtd
Address: Project: Perfil "C" Samet PC-03-G

Symbol Values Unit Symbol description Section

Parameters of lateral buckling analysis:

Rm 1.00 Cross-section monosymmetry parameter [Comm.F1]


Cb 1.00 Lateral-torsional buckling modification factor [F1.(3)]
Lb 2000.00 mm Laterally unbraced length of a member (lateral-torsional [F]
buckling)
Other:

Internal forces

Mry 10.00 N*m Required flexural strength


Mrz 10.00 N*m Required flexural strength

Nominal strengths:

About the Y axis of cross-section


Mpy 961.85 N*m Nominal plastic bending moment [F]
Mny 961.85 N*m Nominal flexural strength [F]
About the Z axis of cross-section
Mpz 1133.54 N*m Nominal plastic bending moment [F]
Mnz 1133.5 N*m Nominal flexural strength [F]
4
Design strengths:

About the Y axis of cross-section


Fib*Mpy 865.66 N*m Design plastic bending moment [F]
Fib*Mny 865.66 N*m Design flexural strength [F]
About the Z axis of cross-section
Fib*Mpz 1020.19 N*m Design plastic bending moment [F]
Fib*Mnz 1020.19 N*m Design flexural strength [F]

Verification formulas:

UF(H1_1b) 0.02 Mry/(Fib*Mny) + Mrz/(Fib*Mnz) Verified

Ratio:

RAT 0.02 Efficiency ratio Section OK

Date : 24/06/20 Page : 2

You might also like