Scribd
Upload
83 views3 pages

Isc 2SC4834: Silicon NPN Power Transistors

The 2SC4834 is a silicon NPN power transistor from INCHANGE Semiconductor with the following key specifications: - It has a collector-emitter sustaining voltage of 400V minimum and can handle currents of up to 8A continuously and 16A peak. - It provides fast switching speeds, low saturation voltage, and has been 100% avalanche tested with minimum lot-to-lot variations for robust performance. - Intended applications include switching regulators and general purpose power amplifiers.

Uploaded by

Erwin Rolando Escobar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views3 pages

Isc 2SC4834: Silicon NPN Power Transistors

The 2SC4834 is a silicon NPN power transistor from INCHANGE Semiconductor with the following key specifications: - It has a collector-emitter sustaining voltage of 400V minimum and can handle currents of up to 8A continuously and 16A peak. - It provides fast switching speeds, low saturation voltage, and has been 100% avalanche tested with minimum lot-to-lot variations for robust performance. - Intended applications include switching regulators and general purpose power amplifiers.

Uploaded by

Erwin Rolando Escobar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

INCHANGE Semiconductor

isc Silicon NPN Power Transistors 2SC4834

DESCRIPTION
·Collector-Emitter Sustaining Voltage-
: VCEO(SUS)= 400V(Min)
·Fast Switching Speed
·Low Saturation Voltage
·100% avalanche tested
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
APPLICATIONS
·Switching regulators
·General purpose power amplifiers
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL PARAMETER VALUE UNIT

VCBO Collector-Base Voltage 500 V

VCEO Collector-Emitter Voltage 400 V

VEBO Emitter-Base Voltage 7 V

IC Collector Current-Continuous 8 A

ICM Collector Current-Peak 16 A

IB Base Current-Continuous 3 A

IBM Base Current-Peak 6 A

Total Power Dissipation


PT 45 W
@ TC=25℃

TJ Junction Temperature 150 ℃

Tstg Storage Temperature Range -55~150 ℃

THERMAL CHARACTERISTICS

SYMBOL PARAMETER MAX UNIT

Rth j-c Thermal Resistance,Junction to Case 2.78 ℃/W

isc Website：www.iscsemi.cn 1 isc & iscsemi is registered trademark


INCHANGE Semiconductor

isc Silicon NPN Power Transistors 2SC4834

ELECTRICAL CHARACTERISTICS
TC=25℃ unless otherwise specified

SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT

VCEO(SUS) Collector-Emitter Sustaining Voltage IC= 0.1A; IB= 0 400 V

VCE(sat) Collector-Emitter Saturation Voltage IC= 4A; IB= 0.8A 1.0 V

VBE(sat) Base-Emitter Saturation Voltage IC= 4A; IB= 0.8A 1.5 V

ICBO Collector Cutoff Current At rated Voltage 100 μA

ICEO Collector Cutoff Current At rated Voltage 100 μA

IEBO Emitter Cutoff Current At rated Voltage 100 μA

hFE-1 DC Current Gain IC= 4A; VCE= 2V 10 25

hFE-2 DC Current Gain IC= 1mA; VCE= 2V 10

fT Current-Gain—Bandwidth Product IC= 0.8A; VCE= 10V 13 MHz

Switching times

ton Turn-on Time 0.3 μs

IC= 4A; IB1=0.8A; IB2= -1.6A;


tstg Storage Time 1.3 μs
RL= 37.5Ω; VBB2= 4V

tf Fall Time 0.1 μs

2
isc Website：www.iscsemi.cn isc & iscsemi is registered trademark
INCHANGE Semiconductor

isc Silicon NPN Power Transistors 2SC4834

NOTICE：
ISC reserves the rights to make changes of the content herein the datasheet at any time
without notification. The information contained herein is presented only as a guide for the
applications of our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in
equipment which could have applications in hazardous environments, aerospace industry, or
medical field. Please contact us if you intend our products to be used in these special
applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products,
and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages.

isc Website：www.iscsemi.cn 3 isc & iscsemi is registered trademark

You might also like