Scribd
Upload
129 views

DFT - Training Course-1 PDF

This document provides an overview and agenda for a 4-day training course on design for test (DFT) and printed circuit board (PCB) design analysis with a focus on testing. The course will be taught by two instructors using current customer designs and data. It will cover DFT principles and standards, test equipment, the PCB design and fabrication process, test strategies, and practical applications. Participants will receive course materials and standards references. The goal is to help products meet quality requirements and have high test coverage to reduce defects.

Uploaded by

Mauricio Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
129 views

DFT - Training Course-1 PDF

This document provides an overview and agenda for a 4-day training course on design for test (DFT) and printed circuit board (PCB) design analysis with a focus on testing. The course will be taught by two instructors using current customer designs and data. It will cover DFT principles and standards, test equipment, the PCB design and fabrication process, test strategies, and practical applications. Participants will receive course materials and standards references. The goal is to help products meet quality requirements and have high test coverage to reduce defects.

Uploaded by

Mauricio Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

DFT

Design for Test


PCB Design Analysis Focused in Test

and
Advanced Strategic Plan for Tests

Instructor: Mauricio Castro

HSIS, Engineering Solutions


M. Castro / F. Briceño
DFM / Detalis
Theory and Practice
Using current designs and data from your Company.

 Based in IPC Standards, SMTA and the best industry practices.


 Conducted by 2 instructors.
 Participants: 6 to 9.
 Course duration: 4 days (32hrs).
 Who can attend:
 Design Eng, Tests Eng, Product Eng, Project Eng, NPI Eng,
 Manufacturing Eng, Process Eng, Quality Eng, Supplier Quality Eng.
 Manufacturing Supervisors, Procurement
 Engineering Managers
 Requirements to conduct the practices:
 LapTop PC.
 Gerber Files of 1 or 2 products running or in design process.
 Deliverables:
 Prints of the course (Manual).
 CD, including IPC standards for Design and Acceptability.

HSIS – Engineering Solutions


F. Briceño / M. Castro
Jun – 2014
v3.1
DFT / Contents
1. Introduction
1.1 The importance of perform DFT in the PCB Design Process.
1.2 APQP, Advanced Product Quality Planning methodology.
1.3 Quality requirements: IPC, IPC-Jstd-001 and IPC-A-600.
1.4 Concepts and terms of DFT, Process Control and the Quality as a function of the Yield.

2. Test Equipment
2.1 Test Platforms.
2.2 Test Fixtures.
2.3 MSA (Measurement System Analysis), Test Equipment as gage “go-no-go”.
2.3.1 Production Release of Tests Equipment: GR&R and Capacity Analysis (cpk).
2.3.2 Test Equipment periodic verification and validation plans.

3. DFT (Design For Test)


3.1 Netlist files and its related software.
3.2 PCB fabrication process.
3.3 Materials selection. PCBs arrays or panels.
3.4 DFT, PCB design rules and IPC standards application.
3.5 DFT, Electrical Design general rules.

4. Test Strategies
4.1 Assembly and Test process.
4.2 Test strategies and Test Coverage plan.
4.2.1 Test Strategy: PCOLA-SOQ methodology.
4.2.2 Test Strategy: The “Swiss-Cheese” model.
4.3 Quality as a Yield function and Test coverage.

5. Practice and Applications.


Practical analysis and evaluation of the Test Strategy with products used in the company.

6. Addendum.

HSIS, Engineering Solutions


M. Castro / F. Briceño
Introduction

DFT : Design for Tests or Testing or Testability it’s a term derived from DFM.

It’s the process to assure that a Product complies the functional characteristics specified in
the original design. Assuring the most test coverage, giving a product with a minimum or
tending to zero defects.

Application areas:
• DFM - Design For Manufacturability o Manufacturing (includes PCB fabrication DFF and SMT, PTH and
Box Build manufacturing).
• DFT - Design For Testability or Test.
• DFA – Design For Assembly (used for Mechanical Assemblies).
• DFS - Design For Service (used to facilitate servicing products).
• DFR - Design For Reliability.
• DFC - Design For Cost.
• DFE – Design For Environment (green technologies).
• DFU - Design For Usability.

It’s also known as DfX, where X means “eXcellence” that uses all application areas.

But it’s best knowing as DFM.

HSIS, Engineering Solutions


M. Castro / F. Briceño
1.1 The importance of perform DFT in the PCB Design Process.

 Why we need to use DFT and DFM

Product Time to Market

Products designed using DFT/DFM have a superior quality and therefore these products
don’t waste time in repairs or debugging. Also, a good execution of DFT/DFM gave to the
Assembler enough time to develop all the required tooling, test fixtures, test programs
and manufacturing process instructions to be ready for the first production run.

HSIS, Engineering Solutions


M. Castro / F. Briceño
About the trainer

Mauricio Castro
[email protected]

Phone: (521)(33) 3349-1360

More than 30 years of experience in the Electronics Industry.

Degree in Electronics Engineering by ITESO


(Instituto Tecnologico y de Estudios Superiores de Occidente) in Guadalajara.

Areas of expertise: Test Eng, Supplier Quality, NPI's and PCB Design.

Certified in IPC-A-610.

Guadalajara office: Rejoneador 6845, Hacienda del Tepeyac, Zapopan Jalisco, 45053. Tel (33) 3125-3525
Querétaro office: Av. El Mirador de Querétaro No. 12 int. 60, Fracc. El Mirador, El Marqués, Querétaro.

HSIS, Engineering Solutions


M. Castro / F. Briceño

You might also like