Scribd
Upload
37 views

Ac Systen Cont

The document discusses indicators related to battery charging, inverters, and AC bus power on an aircraft. The battery amp indicator monitors charging and discharging of selected batteries. Inverter fault lights illuminate if overvoltage or undervoltage is detected, triggering alarms. Failed inverters automatically isolate within 10 seconds via closing of AC circuit breakers to reroute power from the other inverter. An AC bus off light and alarms activate if the associated bus loses power.

Uploaded by

Jeevan Basnyat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views

Ac Systen Cont

The document discusses indicators related to battery charging, inverters, and AC bus power on an aircraft. The battery amp indicator monitors charging and discharging of selected batteries. Inverter fault lights illuminate if overvoltage or undervoltage is detected, triggering alarms. Failed inverters automatically isolate within 10 seconds via closing of AC circuit breakers to reroute power from the other inverter. An AC bus off light and alarms activate if the associated bus loses power.

Uploaded by

Jeevan Basnyat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BATTERY CHARGE AND DISCHARGE INDICATION

Battery charging is monitored by the DC Amp indicator. This indicator will indicate if the selected Battery
is charging or discharging. The battery amp indicator selector, located under the indicator, is used to
select which battery is connected to the indicator.

INVERTER FAULT LIGHT INDICATOR

The inverter fault light monitors the associated inverter. A fault light will illuminate in the event of
UNDERVOLTAGE or OVERVOLTAGE has been detected at the output of the associated inverter. An
undervoltage could be caused either by an inverter failure or loss of power to the inverter

Regardless of the cause, the illumination of a fault light will result in a single chime both MASTER and
CAUTION light flash, and the ELEC light illuminates on the CREW ALERTING PANEL.

INVERTER FAIL AUTOMATIC ISOLATION

If an inverter fails, there is no corrective action to be taken by the crew. Within 10 seconds of the failure
the AC BTC should close automatically. This will power the affected AC BUS and AC STBY BUS from the
other inverter.

The indications of a failed inverter consist of a single chime, the illumination of the ELEC light on the
CREW ALERTING PANEL, and the flashing of both the MASTER CAUTION lights. However, by the time you
look up to the overhead panel, the problem has resolved itself.

AC BUS OFF INDICATOR

The AC BUS off light illuminates in the event the associated AC BUS is not powered. In addition to the
light, both the MASTER CAUTION lights flash, and the ELEC light illuminates on the CREW ALERTING
PANEL.

You might also like