Scribd
Upload
48 views

Product Data Sheet: Product Identification Article Number 30300001 F 4 GG 30

This document provides product information for an article numbered 30300001. It is a folder belt made of elastomer and polyamide materials for applications in logistics, packaging, and processing industries. The belt is 2.9mm thick, weighs 3.4kg/m2, and has a standard width of 500mm. It can operate between -20°C and 80°C and is permanently antistatic and oil and grease resistant. The belt is joined using a wedge or polyamide glue with a pressing time of 60 minutes at 120°C.

Uploaded by

Daniel García
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Product Data Sheet: Product Identification Article Number 30300001 F 4 GG 30

This document provides product information for an article numbered 30300001. It is a folder belt made of elastomer and polyamide materials for applications in logistics, packaging, and processing industries. The belt is 2.9mm thick, weighs 3.4kg/m2, and has a standard width of 500mm. It can operate between -20°C and 80°C and is permanently antistatic and oil and grease resistant. The belt is joined using a wedge or polyamide glue with a pressing time of 60 minutes at 120°C.

Uploaded by

Daniel García
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Data Sheet

Product identification F 4 GG 30 Article number 30300001

Product group Folder belt


Function Folding, gluing, spooling

Application Gluing systems, sorting systems, distributing systems, spooling systems

Industry Logistics, cardboard, packaging, beverage industry, paper processing

Product construction
Material friction cover Elastomer
Characteristics friction cover structured
Color friction cover green
Thickness friction cover 1,35 mm

Material traction layer polyamide

Material reverse cover Elastomer


Characteristics reverse cover structured
Color reverse cover green
Thickness reverse cover 1,35 mm

Product characteristics
Total thickness 2,9 mm (± 0,2 mm)
Belt weight 3,4 kg/m²
Standard production width 500 mm
Maximum tensile force 135 N/mm
-at 1% elongation 4 N/mm
Minimum pulley diameter 30 mm
Operating temperatures Min: -20 °C -4 °F Max: 80 °C 176 °F
Permanently antistatic DIN EN 20284 yes
Flammability DIN EN 20340 no
Chemical resistance oil and grease resistant

Endless joining
Recommended joining Wedge joining
Joining length 75 mm

Joining material
Polyamide glue Glue F
Rubber glue Total Syntic
Additional material ---

Note Allow both adhesives to evaporate for app. 5 minutes after application

Joining parameters Pressure plate


Pressing temperatures 120 °C 248 °F Fabric
Pressing time 60 minutes
Belt

Alternative joining methods Fabric


Finger joining no Heating plate
Step joining no
Mechanical joining G003

The listed performance data, information on application and use are only recommendations and were identified under normal conditions and are subject to the changes
through continuous development. Since the VIS GmbH has no influence on the specific conditions of use, there can be differences in the data and information. Therefor, no
liability can be accepted for the qualification of the product for the specific application.

Technical status: 03/18 - specifications subject to change without notice -

You might also like