(2004-) 2017 Computer Engineering Program

Electrical Engineering & Computer Science Department

Undergraduate Advising Office
3415 EECS (734.763.2305)/ 2808 BBB (734.763.6563)

This brochure applies to students who entered the College of Engineering during or after Fall 2004*

Thank you for your interest in the Computer Engineering (CE) program. Computer engineering focuses on the
theory and practice of analysis and design of complex digital systems, including general-purpose computers and
special-purpose embedded systems. CE straddles the line between hardware and software, and partially overlaps
computer science and electrical engineering programs. CE students learn how to design hardware-software systems
from transistors to systems software. Microprocessors are a central topic, and our curriculum includes both designing
microprocessors and building hardware-software systems that contain microprocessors. While many of our graduates
go on to work at traditional computer companies (e.g., AMD, Apple, ARM, IBM, Intel, Microsoft, RedHat, and
Samsung), many also go to work for the much more numerous companies that embed computers within other
products such as cars, consumer electronics, appliances, medical devices, tractors, and airplanes.

Undergraduate Advising Office Information:

If you are considering or declared as a CE major, we highly recommend that you see a CE faculty advisor every term,
even if you know what courses you want to take. There may be options or constraints that you are unaware of as you
plan your schedule. Frequent meetings with a faculty advisor will help ensure that you get the most out of your
education here and that you have no surprises when you apply for your diploma. To see a faculty advisor, please set
up an appointment online at https://www.eecs.umich.edu/eecs/undergraduate/index.html.
For routine questions not covered by this handout, such as whether a course will satisfy a particular requirement, you
have several options:
• Check the EECS Advising Web page: http://www.eecs.umich.edu/eecs/undergraduate/index.html.
This site includes information about scheduling appointments with advisors, registration procedures, course
offerings, book lists, time schedules, advising hours, and career planning advice.
• Talk to the EECS Undergraduate Advising Office staff. Feel free to drop in at the EECS Undergraduate Advising
Offices (3415 EECS or 2808 BBB) or email [email protected].
• Email us at [email protected].

EECS Grading & Repeat Policies

A grade of C- or below in any of the College Core, Program Core, or Technical Electives is considered a failing grade
and the course must be repeated or substituted with another. [Note: Grades of C- through D- are acceptable for
Intellectual Breadth requirements or for Free Electives.] Students are limited to attempting each of the three 200-level
courses (EECS 203, EECS 280, EECS 281) at most twice. An attempt includes, but is not limited to, a notation of any
letter grade (“A-F”), withdraw (“W”), Pass/Fail (“P”/”F”), Transfer ("T"), or Incomplete (“I”) posted on your U-M
transcript. At most one attempt from Summer 2014 and earlier will count against this limit. Exceptions to this rule can
be granted by the Chief Program Advisor only in extraordinary circumstances.

This handout covers rules and advice for the CE program as of the 2016–2017 academic year. By default, your
program is determined by the rules that are in effect when you enter the College of Engineering. See the advising web
page or contact us if you have any questions.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 1 of 9

(2004-) 2017 Computer Engineering
Core, Upper Level, and EECS Elective Requirements
Core Electives
8 credits (2 courses) from the following list (prerequisites in parentheses):
281: Algorithms & Data Structures (EECS 203 & 280) 351: Intro. Digital Signal Process. (EECS 216)
312: Digital Circuits (EECS 216) 373: Microproc. Based Systems (EECS 270 & 370)

Upper Level CE Electives

10 credits (typically 3 courses) from the following list, one of which should be a Major Design Experience course
offering, see next section for more details (prerequisites in parentheses):
427: VSLI Design I (EECS 270, 312, & 320) 489: Computer Networks (EECS 482)
442: Computer Vision (EECS 281) 527: Layout Synthesis and Optimization (EECS 281 or 478)
452: Digital Signal Processing Design Lab (EECS 280, and (EECS 427 or EECS 470)
216, & [351 or 455]) 570: Parallel Computer Architecture (EECS 470)
461: Embedded Control Systems (EECS 216 or 373) 573: Microarchitecture (EECS 470)
467: Autonomous Robotics (EECS 281) 578: Computer-Aided Design Verification of Digital Systems
470: Computer Architecture (EECS 270 & 370) (EECS 478)
473: Adv. Embedded Sys. (EECS 373 & [215 or 281]) 582: Advanced Operating Systems (EECS 482)
478: Logic Circuit Synthesis & Opt. (EECS 203 & 270) 583: Advanced Compilers (EECS 281 & 370)
482: Intro to Operating Systems (EECS 281 & 370) 589: Advanced Computer Networks (EECS 489)
483: Compiler Construction (EECS 281 & 370) 627: VLSI Design II (EECS 427)

Major Design Experience (MDE)

The MDE in Computer Engineering has three parts which must be elected concurrently:
1. EECS 496, a 2-credit course covering non-technical aspects of design, such as large multidisciplinary
project design principles, team strategies, ethics, entrepreneurial skills, and social and environmental
awareness
2. TCHNCLCM 496, a 2-credit technical communication course
3. An approved 400-level course that devotes the majority of the class to a large design and implementation
project or a series of closely related projects

Approved MDE courses for Computer Engineering:

EECS 427 VLSI Design I (EECS 270 and EECS 312 and EECS 320)
EECS 452 Digital Signal Processing Design Laboratory (EECS 280 and (EECS 216) and (EECS 351))
EECS 467 Autonomous Robotics (EECS 281)
EECS 470 Computer Architecture (EECS 270 and 370)
EECS 473 Advanced Embedded Systems (EECS 373 & [215 or 281])

No longer MDE courses from Fall 2012, onward:

EECS 483 Compiler Construction and EECS 583 Advanced Compilers

Additions and deletions may be made to this list at any time; check with the advising office before
committing to a particular course. You may request special permission to use an MDE project course from
another program (including the Multidisciplinary Design Program), but this class will generally not count as
an upper-level elective (normally it is a flex tech). If you plan on taking advantage of this option you must
discuss this with the CE Chief Program Advisor.

EECS Elective
3 credits (typically 1 course) from the following EECS courses: 281, 311, 312, 320, 330, 334, 351, 373, 376, 381,
388, 411, 413, 414, 417, 419, 420, 421, 423, 424, 427, 429, 430, 434, 435, 438, 441, 442, 445, 452, 453, 455, 458,
460, 461, 467, 470, 473, 475, 477, 478, 480, 481, 482, 483, 484, 485, 586, 487, 489, 492, 493, 494, 497, and
MECHENG 552 (for dual CE-ME majors only). Other EECS courses may be approved on a case-by-case basis.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 2 of 9

(2004-) 2017 Computer Engineering
Flexible Technical Elective Requirements
Listed below are courses that meet the Flexible Technical Elective requirement for CS-Eng, CS-LSA, and CE. Other
courses (including Special Topics courses like EECS 398 and 498) may be approved on a term-by-term basis.
Please see the Undergraduate Advising Office with questions. All tutoring and seminar courses are excluded.
Directed/Independent Study Rule: Up to 4 credits of directed study (ENGR 355, ENGR 455, EECS 499 only; EECS
399 counts toward General Electives) count toward Flexible Technical Elective requirements. This applies to all
independent/directed study courses including those from other departments and multidisciplinary design. Additional
credits count toward General Electives. The credits must be taken for a letter grade to meet FTE requirements.

Aerospace Engineering
AEROSP 215 Intro to Solid Mechanics & Aerospace 300-level & above (except 494 & 495), for AERO 390
Structures & 490: see Directed Study Rule
AEROSP 225 Intro to Gas Dynamics

Atmospheric, Oceanic and Space Sciences

Any AOSS course at the 300-level of higher (499: see Directed Study Rule above)

Biology
BIO 305 Genetics Any 400-level and above course (see Directed Study Rule above)

Biomedical Engineering
BIOMEDE 221 Biophysical Chemistry 300-level & above (490, see Directed Study Rule)
BIOMEDE 231 Intro to Biomechanics

Chemical Engineering
CHE 230 Material & Energy Balances 300-level & above, CHE 490 subject to Directed Study Rule above

Chemistry
CHEM 210 Structure and Reactivity I CHEM 241 Introduction to Chemical Analysis (2 cr.)
CHEM 211 Investigations in Chemistry (1 cr.) CHEM 242 Intro. to Chemical Analysis Lab. (2 cr.)
CHEM 215 Structure and Reactivity II (3 cr.) CHEM 260 Chemical Principles (3 cr.)
CHEM 216 Synth. & Characterization of Org. Compounds (2 cr.) 300-level or higher (see Directed Study Rule above)
CHEM 230 Physical Chemical Principles and Applications (3 cr.)

Civil and Environmental Engineering

CEE 211 Statics and Dynamics CEE 230 Energy and Environment
CEE 212 Solid and Structural Mechanics CEE 265 Sustainable Engineering Principles
300-level & above (except 303, see Directed Study Rule
above)

Complex Systems
CMPLXSYS 270 Agent Based Modeling

Economics
ECON 401 Intermediate Microeconomic Theory ECON 409 Game Theory
(last term as a Flex Tech- Fall’13)
ECON 402 Intermediate Macroeconomic Theory ECON 452 Intro. to Statistics and
(last term as a Flex Tech- Fall’13) Econometrics II

Electrical Engineering and Computer Science

EECS 230 Electromagnetics I EECS 285 A Programming Language or Computer System (2 cr)
300-level & above (except EECS 314, 399, 406, 410; 499 subject to
Directed Study Rule)

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 3 of 9

Engineering
ENGR 350 International Lab Experience for Engineers ENGR 450 Multidisciplinary Design (see Directed Study
Rule above)
ENGR 355 Intermed. Multidisciplinary Engin. Project ENGR 455 Advanced Multidisciplinary Design (see
(see Directed Study Rule above) Directed Study Rule above)
ENGR 403 Scientific Visualization

Industrial and Operations Engineering

IOE 201 Economic Decision Making (2 cr.) [not IOE 202 Operations Modeling (2 cr.) [not open to students with
open to students with senior standing] senior standing]
(last term as a Flex Tech- FA12)
300-level & above, except 373 & 422 (490 subject to Directed study
rule)

Materials Science and Engineering

MATSCIE 220 Intro to Materials & Manufacturing MATSCIE 250 Principles of Engineering Materials
MATSCIE 242 Physics of Materials 300-level & above (MATSCIE 490, see Directed study rule
above)

Mathematics
MATH 214 Linear Algebra and Differential Equations* MATH 217 Linear Algebra*
MATH 216 Introduction to Differential Equations Any MATH course at the 300-level of higher (except 310,
327, 333, 385, 389, 399, 422, 429, 431, 485, 486, 489, 497)

Mechanical Engineering
MECHENG 211 Introduction to Solid Mechanics MECHENG 240 Introduction to Dynamics and Vibrations
MECHENG 235 Thermodynamics I (3 cr.) MECHENG 250 Design and Manufacturing I
300-level & above (MECHENG 490 & 491, see Directed study
rule above)

Naval Architecture and Marine Engineering

NAVARCH 260 Introduction to Nuclear Engineering 300-level & above (NAVARCH 490, see Directed study rule
above)
NAVARCH 270 Marine Design

Nuclear Engineering and Radiological Sciences Engineering

NERS 211 Introduction to Nuclear Engineering (last NERS 250 Fundamentals of Nuclear Engineering
term as a Flex Tech- FA12)
300-level & above, 499 subject to Directed study rule

Performing Arts Technology (PAT dual majors ONLY)

PAT 452 Interactive Media Design II (3 cr.) PAT 462 Digital Sound Synthesis (3 cr.)

Physics
Any 300-level course or above (except 333, 334, 365, 420, 481) Tutoring classes are excluded

School of Information
SI 301 Models of Social Info. Processing SI 422 Evaluation of Systems and Services
SI 364 Building Interactive Applications

Statistics
STATS 401 Applied Statistical Methods II STATS 426 Introduction to Theoretical Statistics (3 cr.)
STATS 403 Intro to Quantitative Research Methods STATS 430 Applied Probability
STATS 406 Introduction to Statistical Computing STATS 470 Introduction to the Design of Experiments
STATS 415 Data Mining and Statistical Learning STATS 531 Analysis of Time Series

Technology & Operations

TO 414 Advanced Analytics (3 cr.)
*Credit will only be given for ONE of the following courses: MATH 214, 217, 417, 419, and 513.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 4 of 9

(2004-) 2017 Computer Engineering
Advisory Track Options
The CE program does not require that students choose a specific track. However, each track represents a coherent
course of study on a particular topic that a student may later pursue as a career. CE tracks have some overlap, so that (a)
students do not have to commit to a single track from their junior year, (b) most students will be able to change their track half-
way through without delaying their graduation, and (c) most students taking “reasonable courses” should be able to complete a
track by selecting two appropriate courses in their final semester. Underlined courses meet the MDE requirement (however, the
list of MDE-approved courses undergoes small changes in most semesters – please check the latest list). Those in italics are
not CE electives. Undergraduate students may take 500-level courses, but only one such course counts toward a track.

Computer Architecture: 281, 470, and two of (373, 427, 570, 573). This track teaches students how to design modern
microprocessors and microprocessor-based systems starting from components such as logic gates. Students interested in
designing the next generation of microprocessors should select this track.

Computer-Aided Design: 281, 478 and two of ((470 or 427), 477, 480, 527, 578, 579, 586). This track prepares students to
improve and use sophisticated automated integrated circuit and computer system design algorithms and software tools.
Functional validation and test of digital systems are part of this track. Students who want a deep understanding of logic design
fundamentals and using computers to aid in the design the next-generation digital integrated circuits should select this track.

Computer-Based Control Systems*: 373, 460, 461, and one of (281, 560, 561). This track prepares students to design and
build computer systems that monitor and control mechanical and other physical processes in real time. Students interested in
developing and implementing the algorithms that unify sensors, computers, and actuators into machines that are heavily
integrated into the physical world should select this track. Also see Robotics and Vision track.

Digital Signals and Systems: 301, 351, 452 and one of (442, 455, 501, 556). This track prepares students to design digital
hardware-software systems that encode, decode, transform, and analyze digital signals. Students interested in developing a
theoretical understanding and thorough practical skills for manipulating and communicating video, audio, and other digital
signals should select this track.

Embedded Systems: 281, 373, and two of (452, 458, 461, 473, 489, 571, 598-Embedded). This track prepares students for
the analysis and design of application-specific computers that run smartphones, medical devices, wireless sensor networks, and
vehicles. Topics such as low-power design, real-time systems, and hardware security are covered. Students interested in
designing portable and application-specific computer systems should select this track.

Robotics and Vision: 281, 442, 467 and one of (461, 492, 556, 568). This track prepares students to design computer systems
that move through their physical environments, recognize objects and activities, and draw conclusions about their surroundings.
Relative to the "Computer‐Based Control Systems" track, the Robotics and Vision track is (1) more focused on specific
applications, (2) involves multi‐dimensional geometry, linear algebra, as well as motion and mechanical modeling, to a
greater extent, and (3) focuses more on high‐level algorithms and systems. Students interested in designing the digital
controllers for robots should select this track.

System Software*: 281, 373, 482 and one of (483, 489, 571, 582, 583). In this track, students develop an expertise in
designing software that interacts heavily with the hardware and/or environment of the system on which it runs. Students
interested in understanding the application- and hardware-dependent implications of software design decisions, such as
processing speed, security, usage of memory and power, should select this track.

VLSI systems (Chip Design): 312, 320, 427 and one of (311, 470, 478, 527, 627). This track prepares students for the
analysis and design of high-performance, low-power, and reliable integrated circuits. If you want to design the complex, high-
performance, and energy-efficient digital circuits that are fundamental to modern and future computers, then this is the track for
you.

Custom Track: Intended for students with high GPA and a strong motivation to pursue specific educational goals. A faculty
sponsor is recommended, especially for students actively involved in research. If you want to be a jack of all trades or have a
plan of study that does not fit into any of the above tracks, discuss the plan with your advisor and create a custom track.

* This track does not currently include an MDE. Students will still need to meet the MDE requirement.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 5 of 9

(2004-) 2017 Computer Engineering
Prerequisite Dependency Graph

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 6 of 9

(2004-) 2017 Computer Engineering Program
Sample Schedule (2016): B.S.E. Computer Engineering

Terms
Credit Hours 1 2 3 4 5 6 7 8
Subjects required by all programs (55 hrs.)
Mathematics 115, 116, and 216 12 4 4 - 4 - - - -
Mathematics 215 4 - - - - 4 - - -
1
ENGR 100 4 - 4 - - - - -
ENGR 101 4 4 - - - - - - -
2
Chemistry 125/130 or Chemistry 210/211 5 - 5 - - - - - -
Physics 140 with Lab 141; 240 with Lab 241 10 5 5 - - - - -
Intellectual Breadth 16 4 4 - 4 - 4 - -

Program Subjects (32 hrs.)

3
EECS 203, Discrete Mathematics 4 - - 4 - - - - -
4
EECS 215, Introduction to Circuits 4 - - - 4 - - - -
EECS 216, Signals and Systems 4 - - - - 4 - - -
EECS 270, Intro to Logic Design 4 - - 4 - - - - -
EECS 280, Programming and Elem. Data Structures 4 - - - 4 - - - -
EECS 370, Intro to Computer Organization 4 - - - - 4 - - -
EECS 301, Math 425 or Stat 412 3 - - - - - 3 - -
TCHNCLCM 300 1 - - - - 1 - - -
5
TCHNCLCM 496/EECS 496 4 - - - - - - - 4

Technical Electives (28 hrs.)

6
Flexible Technical Electives 7 - - - - - - 5 2
6
EECS Electives 3 - - - - - - 3 -
Core Electives 8 - - - - - 8 - -
6
Upper Level CE Electives 10 - - - - - - 4 6
Free Electives (13 hrs.) 13 - - 3 - 3 - 4 3

Total 128 17 17 16 16 16 15 16 15

This is only an example. Don’t be concerned if your schedule differs.

1
Although any ENGR 100 section is acceptable, students interested in CE are encouraged to consider the "Microprocessors
and Toys" section when offered. Note that this section requires ENGR 101 or prior programming experience as a
prerequisite.
2
Students who qualify are encouraged to take CHEM 210 (4 hrs.) & CHEM 211 (1 hr.) as a replacement for CHEM 130 (3
hrs.) & 125/126 (2 hrs.).
3
MATH 465 may be used in place of EECS 203.
4
EECS 215 must be preceded or accompanied by Physics 240.
5
TCHNCLCM 496 and EECS 496 are to be taken concurrently with each other and with a technical Major Design Experience
(MDE) course.
6
Extra credits may flow from Upper Level Electives to EECS Electives to Flexible Technical Electives. As such most students
will fulfill these requirements by taking three 4-credit Upper Level Electives, one 4-credit EECS Elective and one 4-credit
Flexible Technical Elective.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 7 of 9

(2004-) 2017 Computer Engineering
General Advice and Information

• Most technical electives can be counted in multiple elective categories, and while they cannot be counted more
than once, they can be split between two eligible categories. For example, EECS 489 counts as an upper-level
elective, an EECS elective, and a flexible technical elective. You may count all 4 credits toward your upper-
level elective, or two credits toward your upper-level electives and two credits toward your EECS elective, or
three credits toward your EECS elective and one credit toward your flexible technical electives.

• Most students are able to satisfy their upper-level (10 credits), EECS (3 credits), and flexible technical
elective requirements (7 credits) with five 4-credit courses: three classes from the upper-level list, one
additional EECS elective course, and one from the flexible technical elective list. All of the upper-level elective
courses can count as EECS electives, and anything that can count as an EECS elective also counts as a
flexible technical elective.

• Intellectual Breadth – WARNING: This is easy to mess up! The rules about Intellectual Breadth
requirements are complex and not always intuitive. See the CoE Bulletin for details:
(http://www.engin.umich.edu/college/academics/bulletin/ug-ed/reqs - intellectualbreadth). If you have
questions, please contact the EECS Undergraduate Advising Office. Note that Test Credit for Foreign
Languages (AP credits and credits by exam) at the 100-level count only as general electives. For more
information about credit for languages, contact the appropriate department, e.g., the Asian Languages Dept.
maintains information in the Chinese exam, etc.

• The advising office maintains workload surveys by polling current undergrads to gather their opinions of the
workload in various EECS courses. These are helpful when planning courses for future semesters and can be
viewed here: http://www.eecs.umich.edu/eecs/undergraduate/survey/

• Try to balance the number and types of classes you take in a term. Most students had best avoid taking more
than three EECS classes at once; depending on the specific classes, two EECS classes and a free elective can
be plenty! Among the classes you take, it is typically easier to take a lab class and a programming class as
opposed to two lab classes or two programming classes. 270, 215, 216, 373, and 452 are all lab classes. 280,
281, 482, 483, and 489 are all programming classes. 203 and MATH 425 are both math classes. 373, 427,
and 470 all include very time-consuming labs/projects; you should not take more than one of these in a given
term.

• The Michigan Embedded Systems Hub (http://www.eecs.umich.edu/hub/) is a great place to learn about the
basics of embedded systems (embedded programming, soldering, and board design) and to get help with
projects. It offers a number of introductory lessons and there are office hours for getting help with personal
projects.

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 8 of 9

 Unofficial CoE Student Advising Form - Computer Engineering
For advising only; NOT official audit. Students -- consult with your advisor to confirm course selections satisfy degree requirements.

Last Name: First Name: Emplid: Unique ID: GPA: CTP: Elected Hrs:
Req Term: Minor(s): Honor(s): Dual: Subplan: As of:

Common Requirements (CoE) Program Subjects (Prog)

Units Required: 36-39 Units (In Progress and Earned): Units Required: 32 Units Earned: Major GPA:
Math115 Engr100 Chem 130 or 210 Physics140 EECS203 EECS280 TCom300
Math116 Engr101 Chem 125/126 or 211 Physics141 EECS215 EECS370 TCom496
Math215 Physics240 EECS216 EECS496 EECS301/MATH425/STATS412
Math216 Physics241 EECS270
50 units minimum residency taken at UM-AA campus 30 units 300 or higher tech courses taken at UM-AA while enrolled in CoE

Category Subject Nbr Sctn Units Term Grade Note Category Subject Nbr Sctn Units Term Grade Note

Program Core Electives (Core)

Core: EECS 281,312,351,373 Units Reqd: 8 Units Earned:

Intellectual Breadth Category Subject Nbr Sctn Units Term Grade Note
Units Required: 16 Units Earned:
3 units of Humanities Upper Div (3 units min)

Category Subject Nbr Sctn Units Term Grade Note

Upper Level Technical Elec(ULTE) + Major Design (MDE)
Units Required: 10 Units Earned: MDE

Category Subject Nbr Sctn Units Term Grade Note

General Electives (General)

Units Required: 13 Units Earned: 128 Credits Toward Prog Req

Category Subject Nbr Sctn Units Term Grade Note EECS Electives (EECS)
Units Required: 3 Units Earned:

Category Subject Nbr Sctn Units Term Grade Note

Flex Technical Electives (FlexTech)

Units Required: 7 Units Earned:

Category Subject Nbr Sctn Units Term Grade Note

Courses not eligible or not used for credit (NFC)
Category Subject Nbr Sctn Units Term Grade Note

Advisor:_______________________________ Date:_________________

2016-2017 (Updated: 6/27/16 cml) UM-EECS: Comp. Eng. Page 9 of 9