P B M T: Remcote Utyl Astic APE
P B M T: Remcote Utyl Astic APE
Premcote Butyl Mastic Tape is a 100% solids, non-hardening, thick butyl based
Description sealant tape. It has an aggressive surface tack and high tensile strength. These
properties provide an immediate bond, without the need of a primer. Available in
black rolls on easily removable release paper.
Premcote Butyl Mastic Tape is ideal for the joining and sealing together of a variety
Uses of other surfaces including polyethylene, polypropylene, PVC, concrete, metal,
wood and cadwelds.
Prepare surfaces by removing dust, dirt, grease, etc. No primer is needed. Peel off
Application release paper and apply tape to surface.
Premcote Butyl Mastic Tape
Property Specifications
PROPERTIES ENGLISH METRIC
% Solid 100% 100%
Elongation at Break (ASTM C908) 300% 300%
Water Resistance Excellent Excellent
Sag Resistance None None
Tensile Strength (ASTM C907) 10-18 PSI 10-18 PSI (0.07-0.1 MPA)
Lap Shear Strength (ASTM C961) 6 PLI minimum 6 PLI minimum
Low Temperature Flexibility (ASTM C765) Pass @ 0°F Pass @ -17 °C
Temperature Range
For Application 0°F to 120°F -17 °C to 49 °C
For Continuous Service -25°F to 180°F 31 °C to 82 °C
Dimensions
Roll Length 2" x 30' 50 mm x 9 m
Thickness (standard) 1/8" 3.125 mm
Color Black Black
Packaging
Roll Roll Rolls*/
Width Length Case
in. ft. ea.
2" (50 mm) 30' (9 m) 12
Other roll widths are available on request.
HOUSTON: TORONTO:
9747 Whithorn Drive, 90 Ironside Crescent,
Houston, Texas, Unit 12, Toronto,
U.S.A. 77095 Ontario, Canada M1X1M3
Tel: 1-281-821-3355 Tel: 1-416-291-3435
Fax: 1-281-821-0304 Fax: 1-416-291-0898
e-mail: [email protected]
www.premiercoatings.com
A Member of Winn & Coales International
The information given on this sheet is intended as a general guide only and should not be used for specification purposes. We believe the information to be accurate and reliable but do not guarantee it. We assume
no responsibility for the use of this information. Users must, by their own tests, determine the suitability of the products and information supplied by us for their own particular purposes. No patent liability can be assumed.
VER 109.2
109.1