24 month

Manufacturer's
Warranty

SAFETY AND OPERATING MANUAL

Original instructions

SCARIFIER 1300W TTB428GDO

 SAFETY INSTRUCTIONS
Warnings! Read this instruction carefully before operating this pruner.
Make sure that you are familiar with the controls and properly operate the
machine. Following this instructions, you can reduce the risk of fire, electric shock
and personal injury.

GENERAL SAFETY INSTRUCTIONS

Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury! Save all warnings and
instructions for future reference. The term "garden power tool" in the warnings refers to
your mains-operated (corded) garden power tool or battery-operated (cordless) garden
power tool!
Congratulations on your purchase of a power tool from Titan Power 1. This garden power tool is not intended for use by persons (including
Tools (UK) Ltd. We want you to continue getting the best performance from children) with reduced physical, sensory or mental capabilities, or lack of
it so this handbook includes information on safety, handling and care. Please experience and knowledge, unless they have been given supervision or instruction
retain this handbook in case you need to refer to any of the information in the concerning use of the garden power tool by a person responsible for their safety.
future. 2. Children should be supervised to ensure that they do not play with the garden power
tool.
Your power tool comes with a 24-month guarantee, so should it develop 3. The garden power tool must be kept out of reach of children.
a fault within this period contact your retailer. 4. Store the instruction manual in a location accessible to all users of the garden power
tool and always include the instruction manual when passing it on to other users.
5. Instruct inexperienced persons on the safe use of this garden power tool using this
instruction manual.
GUARANTEE
IMPORTANT
This product carries a guarantee of 24 months. If your product develops a fault READ CAREFULLY BEFORE USE
within this period, you should, in the first instance contact the retailer where the item was KEEP FOR FUTURE REFERENCE
purchased.
Training
This guarantee specifically excludes losses caused due to: Read the instructions carefully. Be familiar with the controls and the proper use of the
- Fair wear and tear machine.
- Misuse or abuse
- Lack of routine maintenance Preparation
- Failure of consumable items (such as batteries) 1. Never allow people unfamiliar with these instructions or children to use the
- Accidental damage product. Local regulations can restrict the age of the operator.
- Cosmetic damage 2. Never operate the product while people, especially children, or pets are nearby.
- Failure to follow manufacturer’s guidelines 3. Keep in mind that the operator or user is responsible for accidents or hazards
- Loss of use of the goods occurring to other people or their property.
4. Wear ear protection and safety glasses at all times while operating the product.
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK. 5. Always wear substantial footwear and long trousers while operating the
product. Do not operate the product when barefoot or wearing open sandals.
For any enquiries relating to the guarantee please refer to your retailer. 6. Thoroughly inspect the area where the product is to be used and remove all
stones, sticks, wires, bones and other foreign objects.
7. Before using, always visually inspect to see that the tines, bolts are not
worn or damaged. Replace worn or damaged tines and bolts in sets to preserve
balance.

SCARIFIER 1300W TTB428GDO

Operation Vibration and noise reduction
1. Operate the product only in daylight or in good artificial light. To reduce the impact of noise and vibration emission, limit the time of operation, use low-
2. Avoid operating the product in wet grass or take additional precautions to avoid vibration and low-noise operating modes as well as wear personal protective equipment.
slipping. Take the following points into account to minimize the vibration and noise exposure risks:
3. Always be sure of your footing on slopes. 1. Only use the product as intended by its design and these instructions.
4. Walk, never run. 2. Ensure that the product is in good condition and well maintained.
5. Always work across the face of slopes, never up and down. 3. Use correct application tools for the product and ensure they in good condition.
6. Exercise extreme caution when changing direction on slopes. 4. Keep tight grip on the handles/grip surface.
7. Do not operate the product on steep slopes. 5. Maintain this product in accordance with these instructions and keep it well lubricated
8. Use extreme caution when reversing or pulling the product towards you. (where appropriate).
9. Stop the tines if the product has to be tilted for transportation. Do not operate 6. Plan your work schedule to spread any high vibration tool use across a number of
the tines when crossing surfaces other than grass, and when transporting the product days.
to and from the working area.
10. Never operate the product with defective guards, or without safety devices, for Emergency
example deflectors and/or grass catchers, in place. Familiarise yourself with the use of this product by means of this instruction manual.
11. Switch on the motor carefully according to instructions and with feet well away from Memorise the safety directions and follow them to the letter. This will help to prevent risks
the tine(s). and hazards.
12. Do not tilt the product when switching on the motor, except if the product 1. Always be alert when using this product, so that you can recognise and
has to be tilted for starting. In this case, do not tilt it more than absolutely handle risks early. Fast intervention can prevent serious injury and damage to
necessary and lift only the part which is away from the operator. property.
13. Do not start the motor when standing in front of the discharge opening. 2. Switch off and disconnect from the power supply if there is any malfunction.
14. Do not put hands or feet near or under rotating parts. Keep clear of the Have the product checked by a qualified specialist and repaired, if necessary, before
discharge opening at all times. you put it into operation again.
15. Never pick up or carry a product while the motor is running.
16. Stop the motor and disconnect the product from the power supply: Residual risks
-- before clearing blockages or unclogging the discharge opening; Even if you are operating this product in accordance with all the safety requirements,
-- before checking, cleaning or working on the product; potential risks of injury and damage remain. The following dangers can arise in
-- after striking a foreign object. Inspect the product for damage and make repairs before connection with the structure and design of this product:
restarting and operating the product; 1. Health defects resulting from vibration emission if the product is being used over long
-- if the product starts to vibrate abnormally (check immediately). periods of time or not adequately managed and properly maintained.
-- whenever you leave the product. 2. Injuries and damage to property due to broken application tools or the sudden impact
17. Never use the scarifier without the grass catcher bag securely fitted. of hidden objects during use.
3. Danger of injury and property damage caused by flying objects.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure the product is in a safe working WARNING! This product produces an electromagnetic field during operation!
condition. This field may under some circumstances interfere with active or passive
2. Allow the product to cool before storing in any enclosure. medical implants! To reduce the risk of serious or fatal injury, we recommend
3. Check the grass catcher frequently for wear or deterioration. persons with medical implants to consult their doctor and the medical implant
4. Examine the product regularly and replace worn or damaged parts for safety. manufacturer before operating this product!
Additional safety warnings
1. Warning! Beware of sharp tines. Tines continue to rotate after the motor is switched
off.
2. Do not use the product if the cords are damaged or worn.
3. Do not to connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply. A damaged cord can lead to contact
with live parts.
4. Keep extension cords away from the tines. The tines can cause damage to the
cords and lead to contact with live parts.
5. If operating a garden power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the risk
of electric shock.

SCARIFIER 1300W TTB428GDO

VIBRATION Double insulation:
The European Physical Agents (Vibration) Directive has been brought in to help reduce The tool is double insulated. This means that all the external metal parts are electrically insulated
hand arm vibration syndrome injuries to power tool users. The directive requires power tool from the mains power supply. This is done by placing insulation barriers between the electrical
manufacturers and suppliers to provide indicative vibration test results to enable users to make and mechanical components making it unnecessary for the tool to be earthed.
informed decisions as to the period of time a power tool can be used safely on a daily basis and
the choice of tool. Further Advice can be found at www.hse.gov.uk Important note:
Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted with a
Vibration total values (triax vector sum) determined according to EN60335-2-92 and EN13683 two-core cable and plug. Remove the mains plug from socket before carrying out any adjustment
Vibration level for operation Vibration emission value ah = 3.591m/s² or servicing.
Uncertainty K = 1.5 m/s²

The declared vibration emission value should be used as a minimum level and should be used
SYMBOLS
with the current guidance on vibration.
Calculating the actual period of the actual period off use can be difficult and the HSE website Warning
has further information.
The declared vibration emission been measured in accordance with a standard listed test stated
above and may be used to compare one tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
Read the instruction manual
WARNING! The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being ground or cut. Double insulation
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles. Compliance with relevant safety standards
And the tool is being used as intended by its design and these instructions.
Wear eye protection
This tool may cause hand-arm vibration syndrome if its use is not adequately Wear ear protection
managed. Wear breath protection
WARNING! identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the Gloves with saw protection
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time). Note The use of other tools will reduce the users’ total working
period on this tool. Boots with saw protection, steel toecap and non-slip sole

Helping to minimise your vibration exposure risk.

Maintain this tool in accordance with these instructions and keep well lubricated (where To avoid potential electric shock, do not use the unit in humid or wet conditions
appropriate).
Avoid using tools in temperatures of 10°C or less.
Plan your work schedule to spread any high vibration tool use across a number of days. Health
Switch off! Remove plug from mains before cleaning or maintenance
Surveillance.

Health Surveillance.
All employees should be part of an employer’s health surveillance scheme to help identity any Switch off! Remove plug from the mains immediately if the cable is damaged or cut.
vibration related diseases at an early stage, prevent disease progression and help employees
stay in work.
Work across the face of slopes, never up and down.

SCARIFIER 1300W TTB428GDO

Inspect the area where the product is to be used and remove all objects which
could be thrown by the product. If objects are hidden while operating stop the
2 1 25 21
motor and remove them.

Beware of sharp tines. Tines continue to rotate after the motor is switched 3
Off. Remove plug from power supply before maintenance or if the power cord
is damaged. 19 4a 22
4b
18
17 24
20 4

Keep supply cord away from the cutting device.

5

Cutting device continues to rotate after the product is switched off. Wait until 23
all components have completely stopped before touching the product.
16
Objects thrown by the product could hit the user or other bystanders. 6
Always ensure that other people and pets remain at a safe distance from the 7
product when it is in operation. In general, children must not come near the 15
area where the product is.
14 8

Waste electrical products should not be disposed of with household waste, please 13
recycle where facilities exist. Check with your local authority or retailer for recycling
9
advice. 12

Guaranteed sound power level

11

10

1. Handle
2. Cord strain relief
3. Upper handle bar
4. Mounting set (x4) for handle bar
4a. Knob
4b. Bolt
5. Middle handle bar
6. Lower handle bar
7. Screw (x2)
8. Support

SCARIFIER 1300W TTB428GDO

 The declared vibration value has been measured in accordance with a standard test method and
9. Air vents
may be used for comparing one tool with another.
10. Depth adjustment lever The declared vibration value may also be used in a preliminary assessment of exposure.
11. Wheel
12. Castor WARNING! The vibration emission value during actual use of the tool can differ from the
13. Discharge opening declared value depending on the ways in which the tool is used. Identify safety measures to
14. Deflector guard protect the operator that are based on an estimation of exposure in the actual conditions of use
15. Grass catcher (taking account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
15a. Bag
15b. Frame The sound intensity level for the operator may exceed 85dB(A) and ear protection measures are
16. Cord clip (x2) necessary.
17. Switch box
18. Lock-off button ACCESSORIES
19. Start/stop lever Grass catcher with frame 1SET
20. Power cable Cutting device (raking cylinder) 1PC
21. Cutting device (scarifying cylinder) Bolt (M6) 4PC
22. Mounting set for cutting device (x4) Knob 4PC
Spring washer 4PC
22a. Bolt
Screw 2PC
22b. Spring washer Cable clamp 2PC
23. Cutting device (raking cylinder)
24. Bearing
25. Drive shaft

TECHNICAL DATA
Rated voltage 230-240VAC 50Hz
Rated input power 1300W
No-load speed 2990 /min
Max. cutting width 320mm
Working height range -10/-5/0/5/10 mm, 5 adjustments
Grass catcher volume 30 L
Protection class IPX4
Net Weight 15 kg
Cable length 10m

NOISE AND VIBRATION DATA

Measured sound pressure level 84.5 dB(A), K=3 dB (A)
Measured sound power level 97.9 dB(A), K=3 dB (A)
Guaranteed sound power level 104 dB(A)
Vibration: 3.591 m/s², K=1.5m/s²

SCARIFIER 1300W TTB428GDO

 OPERATION INSTRUCTIONS b). Align the middle handle bars (5) to the lower ones (6).
Make sure the holes of the handle bars (5, 6) correspond 5
WARNING! Read all instructions carefully. Do not and secure them with one mounting set (4) on each side.
connect the scarifier to mains supply power before (See Fig. 2). 4a
4b
it is completely assembled. Always wear glove s during
assembly.
6
1. INTENDED USE
1). This scarifier and raker is designated with a rated input
of 1300 Watts. Depending on the fitted cutting device this
product it is either intended for scarifying and removing Fig. 2
thatch from lawns or for raking in domestic and hobby
gardens. c). Slide the cord strain relief (2) onto the upper handle bar
2). When used as a scarifier, this product works by (3). (See Fig. 3).
scratching through and between the grass with specially
adapted prongs that collect and remove any unwanted parts
from the lawn whilst leaving the grass blades intact. At the
2
same time the product scarifies the ground resulting in a
better airing. 3
3). When used as a raker, the fine needles will scratch the
surface of the lawn while simultaneously picking light debris
for better oxygen absorption, airing and draining.
Fig. 3
4). This product is not to be used in wet weather conditions
and may not be used to mow dry, wet or unusually high
d). Align the upper handle bar (3) with the middle handle bar
grass, e. g. pasture grass or for shredding leaves.
(5) and secure them with one mounting set (4) on each side. 3
5). This product is intended for private domestic use only,
(See Fig. 4a,4b).
not for any commercial trade use. It must not be used for
any purposes other than those described.

2. ASSEMBLY INSTRUCTIONS 5
6 Follow the operating instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the 6
machine.
Fig. 4a
1). HANDLE BAR ASSEMBLY
a). Align the lower hand bars (6) with the supports (8). Make
sure the holes in the lower handle bars 4a
correspond those in the supports (8) and secure the bars 3
with one screw (7) each to the support (8).
Fig. 1a (See Fig. 1a, 1b).

6
4b

8 Fig. 4b

Fig. 1b

SCARIFIER 1300W TTB428GDO

 e). Fix the cord with the cord clips (16) to the handle bar (Fig. 4. CUTTING DEPTH ADJUSTMENT
5). WARNING! Always switch the product off and
pull the mains plug from power supply before any
2). GRASS CATCHER ASSEMBLY adjustment.
WARNING! Do not attempt to use the product Adjust the depth according to the needs of your lawn. The
16 without the grass catcher attached. Danger of flying most suitable depth depends on the kind of lawn and the
objects! actual height of the grass.
WARNING! The product must be switched off and 1). Push the depth adjustment lever (10) towards the wheel
the cutting device must have stopped rotating before (11), then move it forward or backward to adjust the cutting
Fig. 5 you attach or empty the grass catcher! depth. (See Fig. 8a). Fig. 8a
WARNING! Never use the scarifier without the 2). Adjust the lever (10) to one out of the five stages. Read
grass catcher bag securely fitted. the adjusted depth from the scale. (See Fig 8b and table)
NOTE: A full grass catcher will reduce the performance of
this product.
Attach the grass catcher (15) to the product before
operation.
a). Open the deflector guard (14), hold it in position and
14
align the hooks on the grass catcher (15) with the hinges to
hang it onto. (See Fig. 6).
b). Empty the grass catcher (15) frequently during use. Do
Fig. 8b
not wait until it is completely full. We recommend emptying it
when it is half full.
15 Scale / Application
c). Lift the deflector guard (14) and pull the grass catcher (15) Setting
Fig. 6 off the hinges to remove it. Position Depth Scarifying Depth Raking
d). Empty the collected material onto a compost heap and for transportation and for transportation and
1 transport -10 mm -10 mm
reattach it onto the product. storage storage
scarifying a young or
3. CABLE ROUTING sensitive lawn, removing
raking a young or
1). Always route the electric main cable away from the work thin thatch layers, also use
2 minimal +5 mm +10 mm sensitive lawn, removing
area to prevent it from coming into contact with the cutting this setting when scarifying
thin thatch layers
device. Plan your route before starting work. Start your work a second time in the
at the nearest point to the electrical outlet, and work away Autumn
from it. This will keep the cable away from the cutting device scarifying healthy lawn,
20 3 middle 0 mm +5 mm raking healthy lawn
and avoid it being accidentally cut. Keep the cable over your removing thatch
shoulder for added safety. scarifying healthy lawn,
2). For cord strain relief of the cable, form a loop of the end 4 deep -5 mm 0 mm raking an unkempt lawn
removing thicker thatch
of the main cable and bring this through the opening at the scarifying an unkempt
Fig. 7 handle and insert it into the cord strain relief. 5 maximal -10 mm lawn, removing thick thatch -5 mm do not use for raking
layers

SCARIFIER 1300W TTB428GDO

 5. POWER CONNECTION 7. OVERLOAD PROTECTION
WARNING! Before operating the scarifier, ensure The overload protection will be activated in the following
that the fastening elements are undamaged. circumstances:
In order to prevent risk, always switch off the motor and pull 1). A build up of scarified material around the cutting device.
out the mains plug before starting this task. 2). If the material scarified is larger then the motor capacity.
3). Where there is too much resistance against the cutting
The product can be connected to any socket (with 230-240V device.
alternating current). We recommend to always use the When the circuit breaker has been activated switch off the
appliance via a Residual Current Device (RCD) with a product and disconnect from the power supply.
tripping current of max. 30mA. Let the product cool down and eliminate the cause before
1). Mains leads on scarifier are particularly susceptible to using the product again.
insulation damage. The causes of this include the following:
- Cut the cable by passing over it with the scarifier.
8. GENERAL OPERATION
- Damage through crushing if the mains lead is routed
under doors or windows. WARNING! In some countries regulations define
- Cracks caused by ageing of the insulation sheath. at what time of the day and on what special days
- Kinks caused by incorrect fastening or routing of the products are allowed to be used and what restrictions apply!
mains lead. Ask your community for detailed information and observe the
2). Such damaged mains leads should not be used under regulations in order to preserve a peaceful neighbourhood
any circumstances as they may cause fatal injuries due to and avoid committing administrative offences!
their damaged insulation sheath. WARNING! If the product strikes a foreign object
3). Always check the plug and cable and make sure they are stop the motor! Switch the product off, disconnect
in good condition before operation. it from the power supply and let it cool down. Inspect the
product thoroughly for damage! Have any damage repaired
6. STARTING AND STOPPING before restarting!
1). STARTING WARNING! Extensive vibration of the product
The product is fitted with a lock-off button feature. To start during operation is an indication of damage!
the product, simply depress the lock-off button (18) then The product should be promptly inspected and repaired!
19 fully press and hold the start/stop level (19). The lock-off
button can now be released. (See Fig.9) 1). Check the product, its power cord and plug as well as
NOTE: It is not necessary to maintain pressure on the lock- accessories for damage before each use. Do not use the
18 product if it is damaged or shows wear.
off button once the start/stop level is squeezed and the
motor is running. The lock-off button is a safety device to 2). Double check that accessories are properly fixed.
avoid accidental start-up of the device. 3). Push the product forward by its handle. Keep the handle
dry to ensure safe support.
Fig. 9 4). Ensure that the air vents are always unobstructed and
2). STOPPING clear. Clean them if necessary with a soft brush. Blocked air
The product will automatically stop once the start/stop level vents may lead to overheating and damage the product.
is released. The lock-off button will have to be depressed 5). Switch the product off immediately if you are disturbed
and the start/stop level squeezed to restart the product while working by other people entering the working area.
motor. Always let the product come to complete stop before putting
it down.
6). Do not overwork yourself. Take regular breaks to ensure
you can concentrate on the work and have full control over
the product.
7). Mow the lawn before working and fertilise afterwards.
8). Make sure that the lawn is clear of stones, sticks, wire or
other objects that could damage the product or its motor.

SCARIFIER 1300W TTB428GDO

 9). Select the suitable cutting depth for the actual grass MAINTENANCE
height.
WARNING! Before carrying out any repairs or
10). Do not work with this product on a wet lawn because
servicing work, you must ensure that the product
it tends to stick to the underbody of the product, preventing
has been disconnected from the power supply. Repairs
the proper discharge of collected material, and it could also
and maintenance work other than described within this
cause you to slip and fall.
instruction manual may be performed only by qualified
11). Slowly push the product forward. Move the product at
specialist!
appropriate speed. Do not move it too fast to prevent the
discharge opening from getting blocked and engine from
1. SERVICE AND STORAGE
useless overloading.
To ensure long and reliable service, carry out the following
12). Work in slight overlapping rows. The most effective
maintenance regularly. Servicing and cleaning work on the
pattern for scarifying/raking lawns is straight lines along one
product and the removal of the guards may only be carried
of the sides. This will keep the rows even and ensures that
out after the motor has been switched off and the plug
all the lawn is scarified/raked without missing any spots. (See
disconnected from the power supply.
Fig. 10 Fig. 10).
1). Regularly check for obvious defects such as loose,
13). Circle around flower beds. When reaching a flower bed
dislodged or damaged chain and guide bar, loose
in the middle of the lawn, make a row or two around the
fixings and worn or damaged components.
circumference of the bed.
2). Check that covers and guards are undamaged and
14). Pay special attention when changing direction.
correctly fitted. Carry out necessary maintenance
or repairs before using the product.
SCARIFYING
3). If the cutting device should happen to fail despite the
Consider the weather when scarifying. Scarify the lawn with
care taken in manufacturing and testing, repair
an increased depth setting during spring time between April
should be carried out by an authorized specialist.
and May as the lawn is better able to recover during this
4). Do not clean the product while it is running.
season. During a wet summer scarify again in late summer
5). Ensure that all the fastening elements (screws, nuts,
with a decreased depth setting. Do not scarify during
etc.) are tight at all times so that you can safely work with
periods of hot weather condition. During a dry rainless
the product.
summer do not scarify a second time in autumn.
6). Check the product frequently for signs of wear. Replace
worn or damaged parts.
RAKING
7). Store your product in a dry place. To ensure a long
In order that a healthy lawn can develop in the spring, it is
service life all screw parts should be cleaned and then oiled.
necessary for greater amounts of air to penetrate the area
8). Clean the product with a brush or cloth. Do not use any
around the roots of the grass. We recommend aerate the
solvents or water to remove dirt.
lawn every 4 - 6 weeks depending on the state of your lawn.
9). The component that is subject to most wear is the cutting
device. You should therefore check the condition of the
cutting device and its mounting at regular intervals.
- If the cutting device is worn or blunt it must be replaced
immediately;
- If the product starts to suffer from excessive vibrations,
this means that the cutting device has not been balanced
correctly or has suffered deformation due to impacts. In this
case it must be repaired or replaced.

SCARIFIER 1300W TTB428GDO

 2. REPLACING/CHANGING CUTTING DEVICE 3. AFTER USE
WARNING! Always switch the product off, 1). Switch the product off, disconnect it from the power
disconnect it from power supply and let it cool down supply and let it cool down.
before changing/replacing the cutting device! 2). Check, clean and store the product as described below.

WARNING! Always use a correct cutting device 4. GRASS CATCHER

according to the intended use! Observe the technical 1). Inspect the grass catcher (15) before each use. Do not
requirements of this product (see section Technical use it if you find any damage.
scarifying cylinder with blades specifications) when purchasing and using cutting devices! 2). Clean the grass catcher (15) after operation. Let the
Cutting devices are very sharp and become hot grass catcher dry thoroughly before storing to avoid mildew.
Fig. 11a
during use! Handle them carefully!
Wear safety gloves when handling cutting devices in order 5. TRANSPORTATION
to avoid injuries like burns and cuts! 1). Switch the product off and disconnect it from power
supply before transporting it anywhere.
WARNING! Make sure two bolts are tight completely 2). Attach transportation guards, if applicable.
before operate the product, don't operate the product 3). Adjust the cutting depth to the transportation stage (refer
if anyone of bolt is missing or loose. to “CUTTING DEPTH ADJUSTMENT”).
If bolt thread is damaged, it must be replaced for safety 4). Always transport the product by its handle.
cause. You can replace it with one suitable size. 5). Protect the product from any heavy impact or strong
raking cylinder with fine needles The product has two functions, scarifying or raking. The vibrations which may occur during transportation in vehicles.
scarifying cylinder is preassembled on the product. The 6). Secure the product to prevent it from slipping or falling
Fig. 11b raking cylinder is included in the supply box. The cylinder over.
can be changed according to different application. (See Fig.
11a, 11b)

1). Remove the grass catcher .

22b 2). Place the product upside down on a flat stable ground to
have access to the underbody.
3). Loosen the two bolts (22a) with a suitable wrench,
remove them together with the spring washers (22b) and
the presently attached cutting device (21 or 23). (See Fig.
22a 12a).
4). To remove the cutting device, first lift the bearing and
then pull it out from the drive shaft (25).

Fig. 12a

5). Align and insert the respective cutting device: Slide

the hex nut into the socket of driving shaft (25) and fix
the bearing to the support with the bolts (22a) and spring
washers (22b). (See Fig. 12b).

Fig. 12b

SCARIFIER 1300W TTB428GDO

TROUBLESHOOTING ENVIRONMENTAL PROTECTION
WARNING! Only perform the steps described in these instructions! All further inspection, Waste electrical products should not be disposed
maintenance and repair work must be performed by a qualified specialist! Contact a of with household waste. Please recycle where
specialist if the problem cannot be solved by yourself! facilities exist. Check with your Local Authority or
retailer for recycling advice.
WARNING! If the product does not perform properly, or sound are abnormal, or motor
For further information visit www.recycle-more.
cannot be started, or stopped as described, or the cutting device does not work properly,
co.uk.
or any other irregularity, or malfunction occurs, do not attempt to repair the product by yourself.
Please contact helpline or local service center.
UK PLUG REPLACEMENT
Problem Possible cause Fault correction The fuse in the main plug of your garden power tool should
Product does not start Not connected to power supply Connect to power supply always be replaced with one of identical rating.
Power cord or plug is defective Check by a specialist electrician. Check the voltage given on your garden power tool matches
Other electrical defect to the Check by a specialist electrician. the supply voltage.The garden power tool is supplied with
product a fitted plug, however if you should need to fit a new plug
Lock-off button not pressed Press lock-off button first, then follows the instruction below.
the start/stop lever
IMPORTANT:
Product does not reach Power source (e.g. generator) Connect to another power source
The wires in the mains lead are coloured in accordance with
full power has too low voltage
the following code:
Air vents are blocked Clean the air vents
Blue – Neutral
Poor result Cutting device is dull/damaged Replace with a new one Brown – Live.
Scarified material exceeds Only scarify materials according
capacity to capacity of the product As the colours of the wires in the mains lead of this
Scarifying depth is incorrect Adjust depth appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the

terminal which is marked with N.
The wire which is coloured brown, must be connected to
the terminal, which is marked with the letter L.
Warning: Never connect live or netutral wires to the earth
terminal of the plug. A 13AMP (BS1363/A) plug must be
used and a 13AMP fuse must be fitted.

NOTE: If a moulded plug is fitted and has to be removed

take great care in disposing of the plug and severed cable,
it must be destroyed to prevent engaging into a socket.
If the supply cord is damaged it must be replaced by a
service agent or a similarly qualiaed person in order to avoid
hazard.

13

SCARIFIER 1300W TTB428GDO

 Declaration of Conformity

We, Importer
TITAN Power Tools (UK) Ltd
Trade House, Mead Avenue, BA22 8RT

Declare that the product

Designation: 1300W SCARIFIER
Model: TTB428GDO

Complies with the following directives:

2006/42/EC - Machinery Directive
2004/108/EC - Electromagnetic Compatibility Directive
2006/95/EC - Low Voltage Directive
2000/14/EC amended by 2005/88/EC - Noise Emission in the Environment by Equipment
for Use Outdoors Directive
2002/95/EC - Restrictions of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment
2002/96/EC and 2003/108/EC - Waste Electrical and Electronic Equipment (WEEE)

The conformity assessment followed was according to Annex III of the directive for equipment
listed in schedule 1 / article 13 the chosen conformity assessment route Internal control of
production
(schedule 10 / Annex V)
– Measured Sound Power Level 97.9 dB(A)
– Guaranteed Sound Power Level 104 dB(A)

Standards and technical specifications referred to:

EN60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 +
A14:2011
EN60335-2-92:2005
EN13683:2004 + A3:2009
EN62233:2008
EN55014-1:2006 + A1:2009
EN55014-2:1997 + A1:2001 + A2:2008
EN61000-3-2:2006 + A1:2009 + A2:2009
EN61000-3-3:2008

Authorised signatory and technical file holder

Date: 30/11/11
8458-6702

ISSUE DATE: REV1-NOV11

Signature:
Name / title: Peter Harries / Quality Manager
Titan Power Tools (UK)Ltd. Trade House, Mead Avenue, BA22 8RT

SCARIFIER 1300W TTB428GDO

SCARIFIER 1300W TTB428GDO