Searchable - Interactive

Product Catalog

WELDING PRODUCTS
Supplier... For The Highest Demands
1
Searchable - Interactive
Product Catalog PRODUCTS:

Covered Electrodes:
Mild Steel
High Tensile
Low Hydrogen
Stainless Steel

Tubular Wires:
Mild Steel
Self-Shielded
Click on SEARCH now or on Metal Cored
any page to find any number or Stainless Steel
word in this document
MIG Wires:
Or,
Mild Steel
Click on the text links at right to High Tensile Steel
link directly to the chapter or Stainless Steel
section you wish to view.
TIG Wires:
Mild Steel
Stainless Steel

SUPPORT:

Contacts:
Customer Services
Corporate Addresses

Packaging:
Covered Electrodes
Tubular Wires
MIG Wires
WELDING PRODUCTS TIG Wires

Supplier... For The Highest Demands

2
Please Read Carefully
Precautions
and
Safe Practices

WARNING
PROTECT YOURSELF AND OTHERS. READ AND UNDERSTAND THIS INFORMATION.

FUMES AND GASES can be dangerous to your health. The gas ozone can be irritating if
inhaled and can cause delayed lung injury. ARC RAYS can injure eyes and burn skin.
ELECTRIC SHOCK can kill.

Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to
keep fumes and gases away from your breathing zone and general area. Wear correct eye,
ear and body protection. Do not touch live electrical parts. FIRST AID: If exposed to excess
welding fumes, remove to fresh air. In case of arc rays, or electrical shock, employ normal
first aid techniques and call a physician immediately.

Protect yourself and others. Read and understand the manufacturer’s instructions and your
employer’s safety practices. See Material Safety Data Sheets (MSDS) for more information
about use and disposal. See American National Standard Z49.1, Safety in Welding and
Cutting, published by the American Welding Society, 550 N. W. LeJeune Road, Miami, FL
33126, OSHA Safety and Health Standards, CFR 1910 available from the U.S. Government
Printing Office, Washington, D.C. 20402

Do not remove this information. For industrial use only. WARNING: These products contain
or produce chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm (Prop 65)

- Do Not Remove, Cover, Or Destroy This Warning -

SP
PRECAUCIÓN: Los humos y gases de soldadura peuden ser peligrosos para su salud.
Utilice ventilación adecuada para alejar los humos del área de respiración. Los rayos del
arco peuden danar los ojos y quemar la piel. Utilice los medios adecuados para proteger las
manos, ojos, cabeza y cuerpo. Lea y comprenda la Hoja de Datos de Seguiridad del
Producto.

WELDING PRODUCTS

Supplier... For The Highest Demands

3
North America: Worldwide:

UNITED STATES Plant CHANGWON Plant

KISWEL WELDING PRODUCTS 58-2, Sungju-dong Changwon,
7950 Dixie Highway Gyeongnam, Korea
Florence, Kentucky US 41042 Tel:+82-55-269-7200, Fax:+82-55-285-1655
Tel: 859-371-0070, Fax: 859-371-5210 E-mail: [email protected]
E-mail: [email protected]
BUSAN Plant
Customer Services: 721-3, Hakjang-dong, Sasang-gu,
859-371-0070 Busan, Korea
Tel:+82-51-317-3131, Fax:+82-51-325-3627
E-mail: [email protected]

TOKYO Office
KISWEL JAPAN LTD.
6F Otori B/D, 4-5, Ohdenma-cho,
Nihonbashi, Chuo-ku, Tokyo, Japan
Tel : +81-3-3669-2490, Fax : +81-3-3669-2494
E-mail: [email protected]

OSAKA Office
KISWEL JAPAN LTD.
KISWEL B/D, 8-24, 3-Chome, Namba Naka
Naniwa-ku, Osaka, Japan
Tel:+81-6-6636-6615, Fax:+81-6-6636-1275
E-mail: [email protected]

DALIAN Office
KISWEL CHINA BRANCH.
2-3-2, 7# Buld. Jinma Rd.
Dalian E&T Development Zone China
Tel: +86-411-751-7780/2, Fax: +86-411-751-7783
E-mail: [email protected]

CHINA Plant
KISWEL DALIAN. LTD.
2-3-2, 7# Buld. Jinma Rd.
Dalian E&T Development Zone China
Tel: +86-411-751-7780/2, Fax: +86-411-751-7783
E-mail: [email protected]

MALAYSIA Plant
KISWEL SDN. BHD.
PLO 63, Jalan Keluli 2, P.O. Box101,
81707 Pasir Gudang, Johor, Malaysia
Tel: +60-7-2515-933, Fax: +60-7-2515-934
E-mail: [email protected]

Dubai UAE
Suite NE411 PO Box 7857
Saif Zone, Dubai UNITED ARAB EMIRATES

LUXEMBOURG Office
KISWEL EUROPE BRANCH
Krakelshaff, L-3235
Bettembourg, Luxembourg
Tel: +352-26-52-6827/1, Fax: +352-51-50-21224
E-mail: [email protected]

WELDING PRODUCTS

Supplier... For The Highest Demands

4
Covered Electrodes
Mild Steel
High Tensile Steel
Low Hydrogen Steel
Stainless Steel

WELDING PRODUCTS
Supplier... For The Highest Demands
5
 Covered Electrodes Mild Steel
AWS E6010 AWS E6011 AWS E6013

KCL-10 KCL-11 KR-3000

Used in pressure piping, ship building, Welding of steel plates and sheet, piping Used for light to medium construction
Applications

tank assembly, galvanized steels and and ship construction. work for all position. Excellent operator
Typical

casting repairs. appeal. Works well with poor fit-up

applications.

1. Excellent penetration with good fusion 1. Excellent all position general 1. Excellent striking and restriking
Characteristics

makes this the preferred choice for construction electrode designed for use properties.
Of Usage

pipeline welding. on both DC and AC current. 2. Excellent slag removal and arc transfer.
2. Low slag volume results and easy slag 2. Slightly higher slag volume than E6010 3. Excellent bead appearance without
removal with good bead appearance. with good bead appearance.
undercut.
3. Produces good mechanical properties,
meets x-ray requirements.

Carbon 0.10 % Carbon 0.08 % Carbon 0.07 %

Composition
Weld Metal

Silicon 0.20 % Silicon 0.37 % Silicon 0.32 %

Manganese 0.47 % Manganese 0.66 % Manganese 0.45 %
Phosphorus 0.014 % Phosphorus 0.015 % Phosphorus 0.015 %
Sulphur 0.012 % Sulphur 0.013 % Sulphur 0.012 %

Y-P (psi) 60,916 Y-P (psi) 59,465 Y-P (psi) 62,366

Mechanical
Properties

T-S (psi) 72,519 T-S (psi) 72,519 T-S (psi) 69,618

El 24 % El 24 % El 29 %
V-Notch 37 ft/lb @ -20°F V-Notch 37 ft/lb @ -20°F V-Notch 52 ft/lb @ -20°F

Dia Amp Dia Length Amp Dia Length Amp

Rec. Parameters

inches Flat V&OH inches inches Flat inches inches Flat V&OH
Available Sizes /

3/32 (2.4) 50-80 40-70 3/32 (2.4) 11.8 (300) 50-80 3/32 (2.4) 13.8 (350) 60-100 60-90
1/8 (3.2) 70-110 60-100 1/8 (3.2) 13.8 (350) 70-110 1/8 (3.2) 13.8 (350) 80-130 80-120
5/32 (4.0) 110-150 90-130 5/32 (4.0) 13.8 (350) 110-150 5/32 (4.0) 15.7 (400) 130-180 90-140
3/16 (5.0) 160-200 140-170 3/16 (5.0) 13.8 (350) 160 -200 3/16 (5.0) 15.7 (400) 160-220 120-190
1/4 (6.0) 17.7 (450) 210-280 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Flat, Vertical, Horizontal and Overhead Flat, Vertical, Horizontal and Overhead Flat, Vertical, and Overhead
Positions
Welding
Approved

ABS, BV, CWB, LR, NK, JIS ABS, CWB, DNV, LR, JIS ABS, BV, CWB, DNV, GL, KR, LR, NK, JIS,
KS

Supplier... For The Highest Demands

WELDING PRODUCTS
6
 Covered Electrodes High Tensile Steel
AWS E7024

K-7024
Flat and horizontal fillet welding of ship
Applications

structures, bridges, structural steels for

Typical

buildings and general structures.

1. Designed for high efficiency in single

Characteristics

and multiple pass welds.

Of Usage

2. Quiet and stable arc with good bead

appearance and excellent operator
appeal.
3. Easy slag removal, self-releasing.

Carbon 0.08 %
Composition
Weld Metal

Silicon 0.35 %
Manganese 0.78 %
Phosphorus 0.016 %
Sulphur 0.012 %

Y-P (psi) 69,618

Mechanical
Properties

T-S (psi) 82,672

El 28 %
V-Notch 52 ft/lb @ 32°F

Dia Length Amp

Rec. Parameters

in (mm) in (mm) Flat H-Fil

Available Sizes /

1/8 (3.2) 11.8 (300) 100-150 100-150

5/32 (4.0) 13.8 (350) 140-190 140-190
3/16 (5.0) 13.8 (350) 200-250 200-250
7/32 (5.6) 13.8 (350) 230-270 230-270
Packaging

10# (5 kg) Carton

Detailed Packaging Information

Flat and Horizontal Welding Positions

Positions
Welding
Approved

ABS, BV, CWB, DNV, GL, KR, LR, NK, JIS

Supplier... For The Highest Demands

WELDING PRODUCTS
7
 Covered Electrodes Low Hydrogen
AWS E7018 AWS E7018-1 AWS E8018-G

K-7018 K-7018N K-8018

Welding of 71 ksi class high tensile Welding of nuclear reactor vessels, Welding of 78 ksi class high strength low
Applications

strength steels of ships, bridges, storage pressure vessels, LPG tankers, LPG alloy steel of ships, bridges, storage tanks
Typical

tanks, building, industrial machinery and storage tanks and similar installations at and buildings.
mining machinery. low temperature.

1. Excellent usability with direct current 1. Excellent impact value at -51°F. 1. Excellent mechanical properties with
Characteristics

applications. 2. Excellent mechanical properties. good crack resistance of deposited weld

Of Usage

metal.
Composition

Carbon 0.07 % Carbon 0.07 % Carbon 0.06 %

Weld Metal

Silicon 0.57 % Silicon 0.58 % Silicon 0.54 %

Manganese 0.97 % Manganese 1.38 % Manganese 1.08 %
Phosphorus 0.012 % Nickel 0.15 % Nickel 0.31 %
Sulphur 0.010 % Molybdenum 0.20 %

Y-P (psi) 69,618 Y-P (psi) 73,969 Y-P (psi) 71,068

Mechanical
Properties

T-S (psi) 82,672 T-S (psi) 85,572 T-S (psi) 85,572

El 30% El 32 % El 28 %
V-Notch 66 ft/lb @ -20°F V-Notch 96 ft/lb @ -51°F V-Notch 110 ft/lb @ -20°F

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH

3/32 (2.4) 13.8 (350) 60-100 50-80 3/32 (2.4) 13.8 (350) 70-100 60-90 3/32 (2.4) 13.8 (350) 60-90 50-80
1/8 (3.2) 13.8 (350) 90-130 80-120 1/8 (3.2) 13.8 (350) 90-130 85-120 1/8 (3.2) 13.8 (350) 90-130 80-110
5/32 (4.0) 15.7 (400) 130-180 110-170 5/32 (4.0) 15.7 (400) 150-190 110-160 5/32 (4.0) 15.7 (400) 140-190 120-170
3/16 (5.0) 15.7 (400) 200-250 160-210 3/16 (5.0) 15.7 (400) 160-220 130-180 3/16 (5.0) 15.7 (400) 180-230 160-200
1/4 (6.0) 17.7 (450) 180-230 - 1/4 (6.0) 17.7 (450) 250-300 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, CWB, DNV, GL, KR, LR, NK, JIS, CWB, DNV, LR ABS, JIS
KS

Supplier... For The Highest Demands

WELDING PRODUCTS
8
 Covered Electrodes Low Hydrogen
AWS E9018-M AWS E11018-M

K-9018M K-11018M
Welding of 85.5 ksi class high strength Welding of low alloy high strength
Applications

low alloy steel of pressure vessels, steels having tensile properties of

Typical

bridges, machinery and penstocks. about 107-114 ksi steels such as

HY80, etc.

1. Excellent mechanical properties 1.Excellent operational performance in all

Characteristics

especially in notch toughness. positions.

Of Usage

2. Meets stringent radiographic 2. Good impact value at -60° F.

standards for welding of alloy steels.

Carbon 0.07 % Carbon 0.08 %

Composition
Weld Metal

Silicon 0.51 % Silicon 0.41 %

Manganese 1.10 % Manganese 1.49 %
Chromium 0.10 % Chromium 0.32 %
Nickel 1.58 % Nickel 1.86 %
Molybdenum 0.20 % Molybdenum 0.32 %

Y-P (psi) 82,672 Y-P (psi) 104,427

Mechanical
Properties

T-S (psi) 97,175 T-S (psi) 118,931

El 30 % El 23 %
V-Notch 66 ft/lb @ -60°F V-Notch 44 ft/lb @ -60°F

Dia Length Amp Dia Length Amp

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH
Rec. Parameters
Available Sizes /

3/32 (2.4) 13.8 (350) 50-100 40-80 3/32 (2.4) 13.8 (350) 50-100 40-90
1/8 (3.2) 13.8 (350) 90-130 80-115 1/8 (3.2) 13.8 (350) 90-130 80-120
5/32 (4.0) 15.7 (400) 140-190 110-160 5/32 (4.0) 15.7 (400) 130-180 110-160
3/16 (5.0) 15.7 (400) 190-240 140-170 3/16 (5.0) 15.7 (400) 180-240 140-200
1/4 (6.0) 17.7 (450) 250-310 - 1/4 (6.0) 17.7 (450) 250-320 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information

Flat, Vertical, Horizontal and Overhead Flat, Vertical, Horizontal and Overhead
Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
9
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Covered Electrodes Stainless Steel
AWS E307-15 AWS E308-15 AWS E308-16

KST-307-15 KST-308-15 KST-308-16

Welding of dissimilar steel and joining Welding of 18%Cr-8%Ni stainless steel, Welding of 18%Cr-8%Ni stainless steel
Applications

work hardenable steels, armor plate, (AISI 301, 302, 304 ,308). (AISI 301, 302, 304 ,308)
Typical

austenitic manganese steels, and

heat-resisting steels for temperatures up
to 662°F.

1. For use on direct current electrode 1.Good performance without hardening 1. Good performance without hardening
Characteristics

positive only. brittleness due to austenitic structure of brittleness due to austenitic structure of
Of Usage

the deposited weld metal. the deposited weld metal.

2. Good heat resistance and corrosion 2. Good heat resistance and corrosion
resistance. resistance.

Carbon 0.06 %
Composition

Carbon 0.06 % Carbon 0.05 %

Weld Metal

Silicon 0.78 %
Silicon 0.38 % Silicon 0.78 %
Manganese 4.68 %
Chromium 18.50 % Manganese 1.54 % Manganese 1.22 %
Nickel 9.30 % Chromium 20.50 % Chromium 19.30 %
Molybdenum 0.60 % Nickel 9.60 % Nickel 9.30 %

T-S (psi) 94,275 T-S (psi) 87,023 T-S (psi) 84,122

Mechanical
Properties

El 48 % El 38 % El 44 %
2
40 % HNO3 0.09 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat in (mm) in (mm) Flat V&OH

3/32 (2.4) 11.8 (300) 55-80 45-60 5/64 (2.0) 9.8 (250) 40-50 5/64 (2.0) 9.8 (250) 40-50 35-45
1/8 (3.2) 13.8 (350) 80-120 70-90 3/32 (2.4) 11.8 (300) 50-80 3/32 (2.4) 11.8 (300) 50-80 40-60
5/32 (4.0) 13.8 (350) 110-150 90-130 1/8 (3.2) 13.8 (350) 80-110 1/8 (3.2) 13.8 (350) 80-110 70-100
3/16 (5.0) 13.8 (350) 140 -180 - 5/32 (4.0) 13.8 (350) 110-150 5/32 (4.0) 13.8 (350) 110-150 90-130
3/16 (5.0) 13.8 (350) 140 -180 3/16 (5.0) 13.8 (350) 140-180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, CWB, DNV, GL, KR

Supplier... For The Highest Demands

WELDING PRODUCTS
10
 Call Customer Service
For Availability: 1.877.754.7935
Covered Electrodes Stainless Steel
AWS E308L-15 AWS E308L-16 AWS E308Mo-16

KST-308L-15 KST-308L-16 KST-308Mo-16

Welding of low carbon 18%Cr-8%Ni Welding of low carbon 18%Cr-8%Ni Butt and Fillet welding of ASTM CF8M
Applications

stainless steel, (AISI 301, 302, 304 ,308, stainless steel (AISI (SUS) 304L). stainless steel castings. Used for welding
Typical

(AISI(SUS)304L). wrought materials such as Type 316L

stainless when increased ferrite is
desired.

1. Excellent welding efficiency because of 1. Excellent welding efficiency because of 1. Welds without brittleness due to
Characteristics

high deposition rate. high deposition rate. structure of deposited weld metal.
Of Usage

2. Remove water, rust, oil and all foreign 2. Remove water, rust, oil and all foreign 2. Good heat and corrosion resistance.
matters from the groove prior to welding. matters from the groove prior to welding. 3. All welds should be cleaned with a
3. Preheating is not necessary in general. clean stainless steel wire brush.

Carbon 0.05 %
Composition

Carbon 0.03 % Carbon 0.05 %

Weld Metal

Silicon 0.36 %
Silicon 0.41 % Silicon 0.78 %
Manganese 1.42 %
Manganese 1.67 % Manganese 1.22 % Chromium 19.8 %
Chromium 20.6 % Chromium 19.3 % Nickel 9.4 %
Nickel 9.5 % Nickel 9.3 % Molybdenum 2.1 %

T-S (psi) 79,771 T-S (psi) 79,771 T-S (psi) 88,473

Mechanical
Properties

El 44 % El 44 % El 38 %
2 2 2
40 % HNO3 0.06 g/m · hr 40 % HNO3 0.06 g/m · hr 5 % H2SO4 5.0 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH

5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-50 35-45 3/32 (2.4) 13.8 (350) 50-80 40-70
3/32 (2.4) 11.8 (300) 55-80 45-60 3/32 (2.4)) 11.8 (300) 55-80 45-60 1/8 (3.2) 13.8 (350) 70-110 60-90
1/8 (3.2) 13.8 (350) 90-130 70-90 1/8 (3.2) 13.8 (350) 90-130 70-90 5/32 (4.0) 13.8 (350) 110-150 90-130
5/32 (4.0) 13.8 (350) 110-150 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130 3/16 (5.0) 13.8 (350) 140-180 -
3/16 (5.0) 13.8 (350) 140-170 - 3/16 (5.0) 13.8 (350) 140-180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, CWB, GL, LR, TUV

Supplier... For The Highest Demands

WELDING PRODUCTS
11
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Covered Electrodes Stainless Steel
AWS E309-15 AWS E309-16 AWS E309L-15

KST-309-15 KST-309-16 KST-309L-15

Welding of 22%Cr-12%Ni stainless steel Welding of 22%Cr-12%Ni stainless steel Welding of 22%Cr-12%Ni steel and
Applications

and heat-resisting castings, clad side of and heat-resisting castings, clad side of heat-resisting castings, clad stainless
Typical

type 304 clad steels. Welding of dissimilar type 304 clad steels. Welding of dissimilar steel. Welding of dissimilar metal such as
steels such as Cr-Mo steel or carbon steels such as Cr-Mo steel or carbon carbon steel to stainless steel.
steel to stainless steel. steel to stainless steel.

1.The deposited weld metal contains 1. The deposited weld metal contains 1. The deposited weld metal contains
Characteristics

optmized levels of ferrite to resist weld optmized levels of ferrite to resist weld optmized levels of ferrite to resist weld
Of Usage

metal cracking. metal cracking. metal cracking.

2.Good heat resistance and corrosion 2. Good heat resistance and corrosion
resistance. resistance.
Composition

Carbon 0.05 % Carbon 0.06 % Carbon 0.03 %

Weld Metal

Silicon 0.36 % Silicon 0.72 % Silicon 0.40 %

Manganese 1.83 % Manganese 1.36 % Manganese 1.92 %
Chromium 24.5 % Chromium 23.6 % Chromium 24.3 %
Nickel 13.3 % Nickel 12.6 % Nickel 13.3 %

T-S (psi) 88,473 T-S (psi) 79,771 T-S (psi) 85,572

Mechanical
Properties

El 39 % El 44 % El 38 %
2
40 % HNO3 0.08 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH

5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 30-50 25-45
3/32 (2.4) 11.8 (300) 55-80 45-60 3/32 (2.4) 11.8 (300) 55-80 45-60 3/32 (2.4) 11.8 (300) 50-80 40-60
1/8 (3.2) 13.8 (350) 80-110 70-90 1/8 (3.2) 13.8 (350) 90-130 70-90 1/8 (3.2) 13.8 (350) 80-110 70-90
5/32 (4.0) 13.8 (350) 110-150 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130 5/32 (4.0) 13.8 (350) 100-150 80-130
3/16 (5.0) 13.8 (350) 140-180 - 3/16 (5.0) 13.8 (350) 140-170 - 3/16 (5.0) 13.8 (350) 140-180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
12
 Call Customer Service
For Availability: 1.877.754.7935
Covered Electrodes Stainless Steel
AWS E309L-16 AWS E309Mo-15 AWS E309Mo-16

KST-309L-16 KST-309Mo-15 KST-309Mo-16

Welding of 22%Cr-12%Ni steel and Build-up welding of Cr-Mo steel or carbon Build-up welding of Cr-Mo steel or carbon
Applications

heat-resisting castings, clad stainless steel. Welding of AISI(SUS)316 clad steel steel. Welding of AISI(SUS)316 clad steel
Typical

steel. Welding of dissimilar metal such as or dissimilar steels. or dissimilar steels.

carbon steel to stainless steel.

1. The deposited weld metal has optimal 1. Excellent crack resistance especially in 1. Excellent crack resistance especially in
Characteristics

ferrite levels to resist weld metal cracking. the welding of dissimilar steels such as the welding of dissimilar steels such as
Of Usage

2. Product also has excellent resistance to stainless steel to carbon steel. stainless steel to carbon steel.
corrosion and intergranular attack. 2. Product intended for use with direct
current only.

Carbon 0.06 % Carbon 0.06 %

Composition

Carbon 0.03 %
Weld Metal

Silicon 0.35 % Silicon 0.78 %

Silicon 0.71 %
Manganese 1.84 % Manganese 1.47 %
Manganese 1.34 % Chromium 22.2 % Chromium 23.2 %
Chromium 23.7 % Nickel 12.4 % Nickel 12.4 %
Nickel 12.6 % Molybdenum 2.4 % Molybdenum 2.3 %

T-S (psi) 79,771 T-S (psi) 91,374 T-S (psi) 91,374

Mechanical
Properties

El 44 % El 36 % El 34 %
2 2 2
40 % HNO3 0.06 g/m · hr 5 % H2SO4 5.5 g/m · hr 5 % H2SO4 5.5 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) F/H-Fil V&OH in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH

5/64 (2.0) 9.8 (250) 30-50 25-45 3/32 (2.4) 11.8 (300) 60-80 50-60 3/32 (2.4) 11.8 (300) 50-70 40-60
3/32 (2.4) 11.8 (300) 50-80 40-60 1/8 (3.2) 13.8 (350) 80-110 70-90 1/8 (3.2) 13.8 (350) 80-100 70-90
1/8 (3.2) 13.8 (350) 80-110 70-90 5/32 (4.0) 13.8 (350) 100-140 90-130 5/32 (4.0) 13.8 (350) 110-140 90-130
5/32 (4.0) 13.8 (350) 110-150 90-130 3/16 (5.0) 13.8 (350) 140-180 - 3/16 (5.0) 13.8 (350) 140-170 -
3/16 (5.0) 13.8 (350) 140-180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, CWB DNV

Supplier... For The Highest Demands

WELDING PRODUCTS
13
 Covered Electrodes Stainless Steel
AWS E309MoL-16 AWS E310-16 AWS E312-16

KST-309MoL-16 KST-310-16 KST-312-16

Build-up welding of AISI(SUS)316 clad Welding of AISI(SUS) 3105, SCS 18 and Welding of 29%Cr-9%Ni type cast steels
Applications

steel or dissimilar steels. clad side of 18%Cr-8%Ni stainless clad and difficult-to-weld steels. Joint welding
Typical

steels. and hardfacing of stainless steel and

heat-resisting steels.

1. Excellent crack resistance especially in 1. The deposited weld metal has 1. Improved crack resistance due to high
Characteristics

the welding of dissimilar steels such as optimized austenitic structure. quantity of ferrite in the deposited weld
Of Usage

stainless steel to carbon steel. 2. Good mechanical property and heat metal.
resistance of the deposited weld metal.

Carbon 0.03 %
Composition

Carbon 0.11 % Carbon 0.08 %

Weld Metal

Silicon 0.76 %
Silicon 0.40 % Silicon 0.45 %
Manganese 1.78 %
Chromium 23.2 % Manganese 1.86 % Manganese 1.30 %
Nickel 13.1 % Chromium 25.6 % Chromium 29.1 %
Molybdenum 2.4 % Nickel 20.8 % Nickel 8.5 %

T-S (psi) 85,572 T-S (psi) 85,572 T-S (psi) 111,679

Mechanical
Properties

El 41 % El 40 % El 24 %
2
40 % HNO3 0.08 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) Flat V&OH in (mm) in (mm) Flat V&OH in (mm) in (mm) F V&OH

5/64 (2.0) 9.8 (250) 30-55 25-45 5/64 (2.0) 9.8 (250) 30-50 25-45 3/32 (2.4) 11.8 (300) 40-80 35-75
3/32 (2.4) 11.8 (300) 55-80 45-60 3/32 (2.4) 11.8 (300) 50-80 40-60 1/8 (3.2) 13.8 (350) 70-110 70-90
1/8 (3.2) 13.8 (350) 90-120 70-90 1/8 (3.2) 13.8 (350) 80-110 70-90 5/32 (4.0) 13.8 (350) 110-140 80-120
5/32 (4.0) 13.8 (350) 100-140 90-130 5/32 (4.0) 13.8 (350) 110-140 90-130 3/16 (5.0) 13.8 (350) 140 -180 -
3/16 (5.0) 13.8 (350) 140 -180 - 3/16 (5.0) 13.8 (350) 140 - 180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

KR CWB

Supplier... For The Highest Demands

WELDING PRODUCTS
14
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Covered Electrodes Stainless Steel
AWS E316-15 AWS E316-16 AWS E316L-15

KST-316-15 KST-316-16 KST-316L-15

Welding of 18%Cr-12%Ni-Mo stainless Welding of 18%Cr-12%Ni-Mo stainless Welding of low carbon 18%Cr-12%Ni-Mo
Applications

steel (AISI(SUS) 316). Welding of steels (AIS1316). Welding of dissimilar stainless steels, austenitic stainless
Typical

dissimilar steels. steels. steels which are required and places

where heat treatment after welding is
impossible.

1. Especially suitable for flat and 1. Especially suitable for flat and 1. Good crack resistance and usability.
Characteristics

horizontal fillet welding. horizontal fillet welding. 2. Better resistance to intergranular

Of Usage

2. Excellent corrosion resistance against 2. Excellent corrosion resistance against corrosion than the E316 grade.
sulphurous acid, phosphoric acid and sulphurous acid, phosphoric acid and
acetic acid. acetic acid.

Carbon 0.06 % Carbon 0.06 % Carbon 0.03 %

Composition
Weld Metal

Silicon 0.39 % Silicon 0.73 % Silicon 0.40 %

Manganese 1.18 % Manganese 1.18 % Manganese 1.21 %
Chromium 18.9 % Chromium 18.3 % Chromium 19.2 %
Nickel 11.5 % Nickel 12.5 % Nickel 11.4 %
Molybdenum 2.3 % Molybdenum 2.3 % Molybdenum 2.3 %

T-S (psi) 84,122 T-S (psi) 82,672 T-S (psi) 85,572

Mechanical
Properties

El 41 % El 41 % El 39 %
2 2 2
5 % H2SO4 0.06 g/m · hr 5 % H2SO4 4.6 g/m · hr 5 % H2SO4 5.0 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH

5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-50 35-45
3/32 (2.4) 11.8 (300) 50-70 40-60 3/32 (2.4) 11.8 (300) 50-80 45-60 3/32 (2.4) 11.8 (300) 55-70 45-60
1/8 (3.2) 13.8 (350) 80-120 70-90 1/8 (3.2) 13.8 (350) 80-120 70-90 1/8 (3.2) 13.8 (350) 80-100 70-90
5/32 (4.0) 13.8 (350) 110-140 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130
3/16 (5.0) 13.8 (350) 140 -170 - 3/16 (5.0) 13.8 (350) 140 -180 - 3/16 (5.0) 13.8 (350) 140 -170 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, CWB, GL

Supplier... For The Highest Demands

WELDING PRODUCTS
15
 Covered Electrodes Stainless Steel
AWS E316L-16 AWS E317L-16 AWS E317L-1 6

KST-316L-16 KST-317-16 KST-317L-16

Welding of low carbon 18%Cr-12%Ni-Mo Welding of AISI(SUS)317. Welding of Welding of low carbon
Applications

stainless steels, austenitic stainless dissimilar steels such as carbon steel to 18%Cr-12%Ni-3%Mo which requires
Typical

steels which are required and places stainless steels. excellent corrosion resistance to sulfuric
where heat treatment after welding is acid and solutions containing these salts.
impossible.

1. Optimum ferrite in the austenitic 1. Good weldability and performance. 1. Good weldability and performance.
Characteristics

structure helps resist weld metal cracking. 2. Reduced susceptibility of pitting. 2. Reduced susceptibility of pitting.
Of Usage

2. Better resistance to intergranular

corrosion than the E316 grade.

Carbon 0.03 % Carbon 0.06 % Carbon 0.03 %

Composition
Weld Metal

Silicon 0.72 % Silicon 0.74 % Silicon 0.75 %

Manganese 1.08 % Manganese 1.20 % Manganese 1.24 %
Chromium 18.4 % Chromium 18.5 % Chromium 18.6 %
Nickel 12.5 % Nickel 12.3 % Nickel 12.4 %
Molybdenum 2.3 % Molybdenum 3.2 % Molybdenum 3.3 %

T-S (psi) 78,320 T-S (psi) 84,122 T-S (psi) 81,221

Mechanical
Properties

El 43% El 42% El 44%

2 2 2
5 % H2SO4 5.0 g/m · hr 5 % H2SO4 4.6 g/m · hr 5 % H2SO4 4.0 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH

5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-50 35-45 5/64 (2.0) 9.8 (250) 40-60 35-45
3/32 (2.4) 11.8 (300) 50-70 40-60 3/32 (2.4) 11.8 (300) 55-90 45-60 3/32 (2.4) 11.8 (300) 55-80 40-60
1/8 (3.2) 13.8 (350) 80-120 70-90 1/8 (3.2) 13.8 (350) 80-110 70-90 1/8 (3.2) 13.8 (350) 80-110 70-90
5/32 (4.0) 13.8 (350) 110-140 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130 5/32 (4.0) 13.8 (350) 110-150 90-130
3/16 (5.0) 13.8 (350) 140- 170 - 3/16 (5.0) 13.8 (350) 140 -180 - 3/16 (5.0) 13.8 (350) 140 -180 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, CWB, GL, KR, LR, TUV

Supplier... For The Highest Demands

WELDING PRODUCTS
16
 Covered Electrodes Stainless Steel
AWS E318-16 AWS E347-16 AWS E347L-16

KST-318-16 KST-347-16 KST-347L-16

Welding of AISI 318, 316, 316L stainless Welding of AISI(SUS)304L, 321, 347 Welding of low carbon AISI(SUS)304L,
Applications

steel. stainless steel and the place where heat 321, 347 stainless steel and the place
Typical

treatment after welding is not possible. where heat treatment after welding is not
possible.

1. The deposited weld metal is highly 1. Excellent intergranular corrosion 1. Excellent intergranular corrosion
Characteristics

resistant to pitting and general types of resistance. resistance.

Of Usage

corrosion.
2. Highly resistant to intergranular
corrosion due to the addition of Nb.

Carbon 0.05 % Carbon 0.06 % Carbon 0.03 %

Composition
Weld Metal

Silicon 0.76 % Silicon 0.42 % Silicon 0.46 %

Manganese 1.32 % Manganese 1.98 % Manganese 1.68 %
Chromium 18.5 % Chromium 19.9 % Chromium 19.4 %
Nickel 11.9 % Nickel 9.5 % Nickel 9.8 %
Molybdenum 2.3 % Molybdenum 0.6 % Niobium 0.7 %

T-S (psi) 91,374 T-S (psi) 91,374 T-S (psi) 88,473

Mechanical
Properties

El 38 % El 36 % El 36 %
2 2 2
40 % HNO3 0.08 g/m · hr 40 % HNO3 0.08 g/m · hr 40 % HNO3 0.08 g/m · hr

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH

5/64 (2.0) 9.8 (250) 40-60 35-45 5/64 (2.0) 9.8 (250) 40-60 35-45 5/64 (2.0) 9.8 (250) 40-60 35-45
3/32 (2.4) 11.8 (300) 50-80 45-60 3/32 (2.4) 11.8 (300) 50-70 45-60 3/32 (2.4) 11.8 (300) 55-80 45-60
1/8 (3.2) 13.8 (350) 80-110 60-90 1/8 (3.2) 13.8 (350) 70-110 65-90 1/8 (3.2) 13.8 (350) 80-110 70-90
5/32 (4.0) 13.8 (350) 120-150 90-130 5/32 (4.0) 13.8 (350) 100-150 90-130 5/32 (4.0) 13.8 (350) 110-140 90-130
3/16 (5.0) 13.8 (350) 140-180 - 3/16 (5.0) 13.8 (350) 140-180 - 3/16 (5.0) 13.8 (350) 140 -170 -
Packaging

10# (5 kg) Carton 10# (5 kg) Carton 10# (5 kg) Carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
17
 Covered
CoveredElectrodes
Electrodes Stainless
StainlessSteel
Steel
AWS
AWSE410-16
E410-16 AWS
AWSE430-16
E430-16

KST-410-16
KST-410-16 KST-430-16
KST-430-16
Welding
Weldingof of
13%Cr
13%Cr steel and
steel andsurfacing of of
surfacing Welding
Weldingof of
17%Cr
17%Cr stainless steel.
stainless steel.
Applications

thethe
part
partwhere
where cavitation or or
cavitation corrosion
corrosion Welding
Weldingof ofAISI(SUS)403,
AISI(SUS)403, 405
405
Typical

resistance
resistanceis is
required.
required.

1. 1.
Excellent
Excellentoxidation corrosion
oxidation and
corrosion and 1. 1.
Preheat
Preheatat at
392-572°F and
392-572°F postheat
and postheat
Characteristics

abrasion resistance of the deposited

abrasion resistance of the deposited weld
weld treat at 1292-1472°F.
treat at 1292-1472°F.
Of Usage

metal.
metal.
2. 2.
Preheat
Preheat at at
212-392°F
212-392°Fand postheat
and postheat
treat at 1292-1472°F due
treat at 1292-1472°F due toto
self-hardening.
self-hardening.

Carbon
Carbon 0.00.0
8%8% Carbon
Carbon 0.07 %%
0.07
Composition
Weld Metal

Silicon
Silicon 0.70 %%
0.70 Silicon
Silicon 0.42 %%
0.42
Manganese
Manganese 0.76 %%
0.76 Manganese
Manganese 0.40 %%
0.40
Chromium
Chromium 12.1 %%
12.1 Chromium
Chromium 17.4 %%
17.4

T-S (psi)
T-S (psi) 81,221
81,221 T-S (psi)
T-S (psi) 76,870
76,870
Mechanical
Properties

El El 2424
%% El El 3131
%%
PWHT
PWHT 1346 °F°F
1346 x 1x hr S·R
1 hr S·R PWHT
PWHT 1400°F x 1x hr
1400°F S·R
1 hr S·R

DiaDia Length
Length Amp
Amp DiaDia Length
Length Amp
Amp
in in
(mm)
(mm) in in
(mm)
(mm) FF V&OH
V&OH in in
(mm)
(mm) in in
(mm)
(mm) FF V&OH
V&OH
Rec. Parameters
Available Sizes /

3/32 (2.4)
3/32 (2.4)11.8 (300)
11.8 60-90 45-60
(300)60-90 45-60 3/32 (2.4)
3/32 (2.4)11.8 (300)
11.8 (300)55-70
55-70 45-60
45-60
1/81/8
(3.2)
(3.2) 13.8 (350)
13.8 80-110 70-90
(350)80-110 70-90 1/81/8
(3.2)
(3.2) 13.8 (350)
13.8 (350)80-100
80-100 70-90
70-90
5/32 (4.0)
5/32 (4.0)13.8
13.8 (350)110-150
(350) 110-15090-130
90-130 5/32 (4.0)
5/32 (4.0)13.8 (350)
13.8 (350)110-140
110-14090-130
90-130
3/16 (5.0)
3/16 (5.0)13.8
13.8 (350)150-180
(350) 150-180 - - 3/16 (5.0)
3/16 (5.0)13.8 (350)
13.8 (350)140-170
140-170 - -
Packaging

10# (5 (5
10# kg)kg)
Carton
Carton 10# (5 (5
10# kg)kg)
Carton
Carton

Detailed
DetailedPackaging
PackagingInformation
Information Detailed
DetailedPackaging
PackagingInformation
Information

AllAll
Welding Positions
Welding Positions AllAll
Welding Positions
Welding Positions
Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
18
Tubular Wires
Mild Steel
Self-Shielded
Metal Cored
Stainless Steel

WELDING PRODUCTS
Supplier... For The Highest Demands
19
 Tubular Wires Mild Steel
AWS E70T-1 AWS E70T-5M AWS E70T-1C/1M, 9C/9M

K-70T K-70TB K-70ST

Designed for welding of 71 ksi high Designed for welding of 71 ksi high K-70ST is designed for welding of
Applications

tensile steel with outstanding tensile steel with only Ar/C02 mixtures. 70,000 psi tensile steel with
Typical

mechanical properties. Typical Typical application is general fabrication outstanding mechanical properties. It is
applications include machinery, where the risk of hydrogen-induced most suitable for fillet welding of
inorganic zinc-primer coated steels
shipbuilding, offshore structures, cracking is to be avoided.
often used in the machinery, steel
bridges and general fabrications.
fabrication and construction industries.

1.Flux cored wire designed for flat and 1. For flat and horizontal position welding. 1. Titania type of flux cored wire for flat and
Characteristics

horizontal position welding. 2. Good fracture toughness at low horizontal position welding.
Of Usage

2. Excellent deposition rate. temperatures with low susceptibility to 2. Efficient due to higher deposition rates.
3. Provides smooth arc, low spatter levels, cracking. 3. Arc characteristics are smooth and
stable.
good bead appearance. 3. Soft, smooth welding arc with low spatter
4. Use with 100% CO2 or Ar+20-25%CO2 .
4. 100%CO2 or Ar+20-25%CO2 shielding levels.
gas should be used. 4. Use Ar+20-25%CO2 shielding gas.

SG CO2 SG Ar+20%CO2 SG CO2

Composition
Weld Metal

Carbon 0.03 % Carbon 0.04 % Carbon 0.04 %

Silicon 0.50 % Silicon 0.34 % Silicon 0.49 %
Manganese 1.45 % Manganese 1.30 % Manganese 1.36 %
Phosphorus 0.014 % Phosphorus 0.016 % Phosphorus 0.015 %
Sulphur 0.013 % Sulphur 0.013 % Sulphur 0.013 %

Y-P (psi) 78,320 Y-P (psi) 71,068 Y-P (psi) 68,000

Mechanical
Properties

T-S (psi) 82,672 T-S (psi) 79,771 T-S (psi) 80,000

El 25 % El 29 % El 28 %
o V-notch o o
V-notch 48 ft/lb @ -4 F 50ft/lb @ -22 F V-notch 100 ft/lb @ -22 F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F H-Fil in (mm) F H-Fil in (mm) F H-Fil

.045 140-340 140-340 .045 (1.2) 120 - 300 120 - 300 .045 (1.2) 140-300 160-300
(1.2) 200-460 200-460 1/16 (1.6) 200 - 450 200 - 450
.052 (1.4) 160-380 180-360
1/16 3/32 (2.4)
(1.6) 1/16 (1.6) 180-420 220-400
5/64 (2.0)
3/32 (2.4)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat and Horizontal Flat and Horizontal Flat and Horizontal

Welding
Approved

JIS, KS ABS,BV, DNV,GL, LR

Supplier... For The Highest Demands

WELDING PRODUCTS
 Tubular Wires Mild Steel
AWS E70T-1C/1M, 9C/9M AWS E71T-1/-1M AWS E71T-1M

KX-200H K-71TLF K-71TM

Designed for welding of 70,000 psi Formulated for welding of 71 ksi high Designed for welding of 71 ksi high
Applications

tensile steel with outstanding tensile steel with outstanding tensile steel with only Ar/C02 mixtures.
Typical

mechanical properties. Typical mechanical properties. Typical Typical applications include machinery,
applications include machinery, applications include machinery, shipbuilding, offshore structures,
shipbuilding, offshore structures, shipbuilding, offshore structures, bridges and general fabrications.
bridges and general fabrication. bridges and general fabrications.

1. Designed for flat and horizontal 1. Titania type for all-position welding. 1. Titanic type for all-position welding.
Characteristics

position welding. 2. Low fume generation, good impact 2. It provides soft, smooth welding arc
Of Usage

2. Better CVN toughness at lower temp. strength at low temperatures. with less spatter levels.
3. Good porosity resistance and used 3. Stable arc, less spatter levels, better 3. Efficient welding with deposition
for fillet welding of inorganic zinc-primer
bead appearance. rates.
coated steels.
4. 100%C02 shielding gas should be 4. Ar+20-25%CO2 should be used.
4. For semi-automatic, automatic,
single- and multiple pass welding. used.

SG CO2 SG CO2 SG Ar+20 % CO2

Composition
Weld Metal

Carbon 0.037 % Carbon 0.03 % Carbon 0.03 %

Silicon 0.56 % Silicon 0.38 % Silicon 0.59 %
Manganese 1.60 % Manganese 1.35 % Manganese 1.44 %
Phosphorus 0.013 % Phosphorus 0.015 % Phosphorus 0.013 %
Sulphur 0.012 % Sulphur 0.010 % Sulphur 0.014 %

Y-P (psi) 73,000 Y-P (psi) 75,420 Y-P (psi) 72,519

Mechanical
Properties

T-S (psi) 84,000 T-S (psi) 82,672 T-S (psi) 75,420

El 28 % El 28 % El 28 %
o o o
V-notch 68 ft/lb @ -22 F V-notch 59 ft/lb @ -4 F V-notch 59 ft/lb @ -4 F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F H-Fil in (mm) F H V in (mm) F H-Fil V

.045 (1.2) 140-300 160-300 .045 (1.2) 120-300 120-300 120-220 .045 (1.2) 120-300 120-300 120-220
.052 (1.4) 160-380 180-360 1/16 (1.6) 200-450 200-400 180-220 1/16 (1.6) 200-450 200-450 180-240
1/16 (1.6) 180-420 220-400
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat and Horizontal Flat, Horizontal, Vertical, Overhead and Flat, Horizontal, Vertical, Overhead and
Welding

Vertical Down Vertical Down

Approved

ABS, KR, DNV, GL, LR ABS, BV, CCS, DNV, GL, KR, LR, NK, ABS, BV, DNV, LR, RINA, TUV, JIS, KS
RINA, TUV, JIS, KS

Supplier... For The Highest Demands

WELDING PRODUCTS
 Tubular Wires Mild Steel
AWS E71T-1C/1M, 9C/9M AWS E71T-1C/1M, 12C/12M

K-71T Plus K-71TP

Formulated for welding of 70,000 psi This wire is designed for low temp.
Applications

tensile steel for use with both CO 2 or impact properties. It can be used in a
Typical

Ar/CO2 gas properties. Typical variety of applications including

applications include machinery, shipbuilding, pressure vessels, bridges
shipbuilding, offshore structures, and the construction industries.
bridges and general fabrication. Ar+20-25%CO2 gases should be used.

1. This is a titania type flux cored wire for all 1. Titania type for all-position welding.
Characteristics

position welding. 2. For 70,000 psi tensile strength steels.

Of Usage

2. It provides excellent feedability and 3. Provides improved impact toughness

soft welding arc, as well as less spatter and lower Mn content reqired in ASME
Boiler and Pressure Vessel Code,
generation.
Section IX.
3. Provides low fume generation and has
4. It has easy slag removal, good weld
good toughness at low temperatures.
soundness, and low spatter.

SG CO2 SG CO2
Composition
Weld Metal

Carbon 0.03 % Carbon 0.025 %

Silicon 0.40 % Silicon 0.43 %
Manganese 1.20 % Manganese 1.12 %
Phosphorus 0.015 % Phosphorus 0.011 %
Sulphur 0.012 % Sulphur 0.011 %

Y-P (psi) 77,000 Y-P (psi) 78,000

Mechanical
Properties

T-S (psi) 83,000 T-S (psi) 83,000

El 28 % El 28 %
o o
V-notch 74 ft/lb @ -22 F V-notch 74 ft/lb @ -22 F

Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F H V in (mm) F H V

.035 (.9) 100-240 120-220 120-160 .035 (.9) 100-240 120-220 120-160
.045 (1.2) 120-300 140-260 160-240 .045 (1.2) 120-300 140-260 160-240
1/16 (1.6) 180-400 200-360 180-260 1/16 (1.6) 180-400 200-360 180-260
Packaging

Detailed Packaging Information Detailed Packaging Information

Positions

All Positions All Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
 Tubular Wires Self Shielded
AWS E71T-11

K-NGS11
Self-shielded flux cored wire for lap and
Applications

fillet welds of mild and medium tensile

Typical

steels not exceeding 74 ksi. Suitable for

prefab, building fabrication, tanks,
ornamental iron, farm equipment, repairs
and general fabrication.

1. Wire is for all position welding of single

Characteristics

and multiple pass fabrications.

Of Usage

2. Welding arc is smooth and stable.

3. It is designed for on site general
fabrication and structural work requiring
no impact properties.
4.Designed for use with DCEN.

Carbon 0.10 %
Composition
Weld Metal

Silicon 0.10 %
Manganese 0.55 %
Phosphorus 0.016 %
Sulphur 0.006 %
Aluminum 1.2 %

Y-P (psi) 72,519

Mechanical
Properties

T-S (psi) 76,870

El 23 %

Dia Amp
in (mm) F
Rec. Parameters
Available Sizes /

.045 (1.2) 80-200

1/16 (1.6) 160-270
5/64 (2.0) 180-280
Packaging

Detailed Packaging Information

All Welding Positions

Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
24
 Call Customer Service
For Availability: 1.877.754.7935
Tubular Wires Metal Cored
AWS E70C-3M AWS E70C-3C AWS E70C-6M

KX-70CM KX-100 KX-706M

Designed for welding of 71 ksi high Typical applications include machinery, Designed for welding of 71 ksi high
Applications

tensile steel with only Ar/C02 mixtures. It is shipbuilding, offshore structures, bridges tensile steel with only Ar/C02 mixtures. It is
Typical

especially suitable for fillet welding and and general fabrications. especially suitable for fillet welding and
has a high tolerance to primer. has a high tolerance to primer.

1. For flat and horizontal position welding.* 1. Wire is a metal type of flux cored wire for 1. For flat and horizontal position welding.*
Characteristics

2. Multiple pass welding can be flat and horizontal position welding.* 2. Good CVN toughness at low temp.
Of Usage

performed without removing slag. 2. Deposition can be higher than solid 3. Good penetration with excellent wetting
3. Can have higher productivity compared wires. characteristics. Higher tolerance to rust/
to solid wires. 3. Multiple pass welding can be performed mill scale compared to E70C-3 grade.
4. Semi-automatic, automatic, single and without removing slag. 4. Intended for semi-automatic, automatic,
multiple pass welding. 4.100%C02 shielding gas should be used. single/multiple pass welding.
Composition

SG Ar+20 % CO2 SG CO2 SG Ar+20 % CO2

Weld Metal

Carbon 0.03 % Carbon 0.04 % Carbon 0.04 %

Silicon 0.40 % Silicon 0.54 % Silicon 0.60 %
Manganese 1.60 % Manganese 1.55 % Manganese 1.50 %
Phosphorus 0.014 % Phosphorus 0.014 % Phosphorus 0.014 %
Sulphur 0.013 % Sulphur 0.011 % Sulphur 0.013 %

Y-P (psi) 69,618 Y-P (psi) 73,969 Y-P (psi) 76,870

Mechanical
Properties

T-S (psi) 78,320 T-S (psi) 79,771 T-S (psi) 88,473

El 29 % El 29 % El 27 %
o o o
V-notch 41 ft/lb @ -4 F V-notch 44 ft/lb @ -4 F V-notch 41 ft/lb @ -4 F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F/H-Fil V in (mm) F/H-Fil in (mm) F H

.045 (1.2) 160-340 180-350 .045 (1.2) 140-340 .045 (1.2) 160-350 180-360
.052 (1.4) 180-420 220-380 1/16 (1.6) 200-460 .052 (1.4) 160-380 180-360
1/16 (1.6) 240-450 280-450 1/16 (1.6) 180-360 280-450
Packaging

.045” (1.2 mm) x 33# (15 kg) spool

1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat and Horizontal Flat and Horizontal Flat and Horizontal

Welding

* Can be used in all position welding * Can be used in all position welding * Can be used in all position welding
when using appropriate pulsed welding when using appropriate pulsed welding when using appropriate pulsed welding
equipment equipment equipment
Approved

ABS, BV, DNV, GL, JIS, KS, LR, RINA ABS, BV, DNV, GL, JIS, KR, KS, LR, NK ABS, BV, DNV, GL, JIS, KS, LR, RINA, CWB
(80%Ar + 20%CO2 TUV) (Ar + 2-20%CO2)

Supplier... For The Highest Demands

WELDING PRODUCTS
25
 Tubular Wires Metal Cored
AWS E70C-6M

KX-706M Plus
KX-706M Plus is designed for welding of
Applications

70,000 psi tensile steel with only Ar/CO2

Typical

gas mixtures. It is especially suitable for

fillet welding and has a high tolerance to
primer.Typical applications include
machinery, shipbuilding, offshore
structures, bridges and fabrication.

1. Provides excellent feedability and good

Characteristics

penentration, high resistance to porosity,

Of Usage

good wetting action and low hydrogen.

2. Slag content generation is same as a
solid wire and is a multiple pass wire that
can be used without removing slag.
3. Can be used semi-automatically,
automatically, single- and multiple pass.
.
Composition

SG Ar+20 % CO2
Weld Metal

Carbon 0.04 %
Silicon 0.45 %
Manganese 1.45 %
Phosphorus 0.014 %
Sulphur 0.013 %

Y-P (psi) 73,000

Mechanical
Properties

T-S (psi) 83,000

El 27 %
o
V-notch 60 ft/lb @ -22 F

Dia Amp
Rec. Parameters
Available Sizes /

in (mm) F H

.045 (1.2) 140-300 160-300

.052 (1.4) 160-380 180-360
1/16 (1.6) 180-400 220-380
Packaging

Detailed Packaging Information

Positions

Flat and Horizontal

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
 Call Customer Service
For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E308LT0-1 / -4 AWS E308LT1-1/-4 AWS E308T0-1/-4

K-308LT0 K-308LT K-308T

Designed for MAG welding of low carbon Designed for MAG welding of low carbon K-308T is formulated for MAG welding of
Applications

18%Cr-8%Ni stainless steel and used to 18%Cr-8%Ni stainless steels. (AISI 304, 18%Cr-8%Ni stainless steels.
Typical

join 301, 302, 304 and 308 stainless 304L, 304LN, It is designed for operation primarily in the
steel. It is designed for operation primarily ASTM A157 Gr. C9; A320 Gr. B8C or D) flat position and for welding horizontal fillet
in the flat position and for welding welds.
horizontal fillet welds.

1.Titania type flux core with self detaching 1.Titania type flux core with self detaching 1.Titania type flux core with self detaching
Characteristics

slag with a spray-like transfer. slag with a spray-like transfer. slag with a spray-like transfer.
Of Usage

2. Low spatter, high efficiency with 2. Low spatter, high efficiency with 2. Low spatter, high efficiency with
optimized ferrite for good resistance to optimized ferrite for good resistance to optimized ferrite for good resistance to
crack susceptibiity.
crack susceptibiity. crack susceptibiity.
3. Can be used with both 100% CO2 and
3. Can be used with both 100% CO2 and 3. Can be used with both 100% CO2 and 80%Ar+20%CO2.
80%Ar+20%CO2. 80%Ar+20%CO2.

SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2

Composition
Weld Metal

Carbon 0.03 % 0.03 % Carbon 0.03 % 0.03 % Carbon 0.05 % 0.04 %

Silicon 0.52 % 0.70 % Silicon 0.62 % 0.79 % Silicon 0.60 % 0.75 %
Manganese 1.70 % 1.80 % Manganese 1.56 % 1.90 % Manganese 1.55 % 1.87 %
Chromium 20.3 % 20.5 % Chromium 19.5 % 19.8 % Chromium 19.5 % 19.7 %
Nickel 10.4 % 10.5 % Nickel 10.5 % 10.2 % Nickel 10.5 % 10.3 %

SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2

Mechanical
Properties

T-S (psi) 89,923 91,374 T-S (psi) 82,672 88,473 T-S (psi) 84,122 88,473
El 38 % 36 % El 38 % 35 % El 38 % 36 %

Dia Electrode Dia Electrode Dia Electrode

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) Extension Amp in (mm) Extension Amp

.045 (1.2) .39" - .79" 100-220 .045 (1.2) .39" - .79" 100-220 .045 (1.2) .39" - .79" 100-220
1/16 (1.6) .59" - .98" 160-260 1/16 (1.6) .59" - .98" 160-260 1/16 (1.6) .59" - .98" 160-260
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal Fillets and Groove Welds Flat, Horizontal, Overhead, Vertical Down Flat, Horizontal Fillet and Groove Welds
Welding
Approved

JIS ABS, BV, CWB, KR, NK, TUV, JIS ABS, BV, DNV, JIS, KR, NK
(80%Ar + 20%CO2 : CWB, TUV)

Supplier... For The Highest Demands

WELDING PRODUCTS
27
 Call Customer Service
For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E309LT0-1 /-4 AWS EC309L AWS E309LT1-1/-4

K-309LT0 K-309LMT K-309LT1

Designed for MAG welding of low carbon Designed for MAG welding of low carbon Designed for low carbon 22%Cr-12%Ni
Applications

22%Cr-12%Ni stainless steel. Dissimilar 22%Cr-12%Ni stainless steels. lt is stainless steels. Dissimilar joint welds.
Typical

joint welds.Cladding for corrosion suitable for automotive exhaust fabricators Cladding for the first layer of corrosion
resistant weld claddings on ferritic-perlitic such as front pipe, bellows, flange. (AISI resistant weld claddings on ferritic-perlitic
steels in boiler and pressure vessel parts 409, 436, cladding and dissimilar joint steels in boiler and pressure vessel parts
up to finegrained steel S500N. welds). up to fine-grained steel S500N.

1. Designed for use on most carbon 1. Designed for welding most mild steels 1. Designed for welding most mild steels
Characteristics

steels to type 304 stainless steels. to austenitic stainless alloys to austenitic stainless alloys
Of Usage

2. Increased Cr and Ni levels provide 2. Increased Cr and Ni provides improved 2. Increased Cr and Ni provides improved
good resistance to cracking. resistence to cracking resistence to cracking
3. Not recommended for use above 3. Not intended for use above 750°F. 3. Not intended for use above 750°F.
750°F.

SG CO2 Ar+20 % CO2 SG Ar+2 % CO2 SG CO2 Ar+20 % CO2

Composition
Weld Metal

Carbon 0.03 % 0.03 % Carbon 0.03 % Carbon 0.03 % 0.03 %

Silicon 0.65 % 0.72 % Silicon 0.48 % Silicon 0.60 % 0.80 %
Manganese 1.55 % 1.60 % Manganese 1.57 % Manganese 1.40 % 1.92 %
Chromium 24.0 % 24.2 % Chromium 23.9 % Chromium 23.6 % 23.8 %
Nickel 13.2 % 13.3 % Nickel 12.4 % Nickel 13.1 % 13.3 %

SG CO2 Ar+20 % CO2 SG Ar+2 % CO2 SG CO2 Ar+20 % CO2

Mechanical
Properties

T-S (psi) 91,374 92,824 T-S (psi) 81,221 T-S (psi) 79,771 87,023
40 % 38 % 40 % 38 %
El El 40 % El

Dia Electrode Dia Electrode Dia Electrode

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) Extension Amp in (mm) Extension Amp

.045 (1.2) .39” - .79” 100-220 .045 (1.2) .39” - .79” 140-220 .045 (1.2) .39” - .79” 100-220
1/16 (1.6) .59” - .98” 160-260 1/16 (1.6) .59” - .98” 180-260 1/16 (1.6) .59” - .98” 160-260
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal Fillets and Groove Welds Flat, Horizontal Fillets and Groove Welds Flat, Vertical and Overhead
Welding
Approved

JIS KR, JIS

Supplier... For The Highest Demands

WELDING PRODUCTS
28
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E309LMoT1-1 AWS E309T0-1/-4 AWS E312T1-1

K-309MoLT K-309T K-312T

Designed for low carbon 22%Cr - Formulated for MAG welding of Formulated for MAG welding of
Applications

12%Ni-Mo. Dissimilar joint welds. 22%Cr-12%Ni stainless steels. Typical 30%Cr-9%Ni stainless steels. It is used
Typical

Cladding for the first layer of corrosion applications are for welding of dissimilar for joining dissimilar steels, steels with
resistant weld claddings on ferriticperlitic steels, such as 304 to mild steel or low reduced weldability and buffer layers prior
steels in boiler and pressure vessel parts alloy steels. to hardfacing (rolls, forging dies, hotwork
up to fine-grained steel S500N. tools and dies for plastics).

1. Provide better weldability with superior 1. Designed primarily for flat and 1.Good resistance to stress corrosion
Characteristics

heat resistance and corrosion resistance. horizontal welding applications. attack and reduced scaling at
Of Usage

2. Higher tensile strength when compared 2. Better weldability, superior heat temperatures up to 2100 °F.
to conventional K-309LT wire. resistance and corrosion resistance. 2. Excellent usability with stable arc, less
3. For Mo-alloyed claddings the product is spatter levels, better bead appearance.
necessary for the first layer.

SG CO2 SG CO2 Ar+20%CO2 SG CO2

Composition
Weld Metal

Carbon 0.03 % Carbon 0.05 % 0.04 % Carbon 0.04 %

Silicon 0.54 % Silicon 0.58 % 0.78 % Silicon 0.83 %
Manganese 1.30 % Manganese 1.45 % 1.93 % Manganese 1.00 %
Chromium 23.7 % Chromium 23.5 % 23.7 % Chromium 30.2 %
Nickel 13.0 %
Nickel 13.0 % 13.4 % Nickel 9.5 %
Molybdenum 2.7 %

SG CO2 SG CO2 Ar+20 % CO2 SG CO2

Mechanical
Properties

T-S (psi) 97,175 T-S (psi) 85,572 88,473 T-S (psi) 110,229

32 % 36 % 35 % El 25 %
El El

Dia Electrode Dia Electrode Dia Amp

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) Extension Amp in (mm) F H V

.045 (1.2) .39” - .79” 100-220 .045 (1.2) .39” - .79” 100-220 .045 (1.2) 100-240A 100-240A 140-200
1/16 (1.6) .59” - .98” 160-260 1/16(1.6) .59” - .98” 160-260 1/16 (1.6) 160-260A 160-380A 180-240
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal, Overhead, Vertical Down Flat, Horizontal Fillets and Groove Welds Flat, Horizontal, Overhead, Vertical Down
Welding
Approved

KR, JIS ABS, BV, DNV, KR, LR, NK, JIS JIS

Supplier... For The Highest Demands

WELDING PRODUCTS
29
 Call Customer Service
For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E316LTO-1/-4 AWS E316LTI -1 /-4 AWS E316T0-1 / -4

K-316LT0 K-316LT1 K-316T

Designed for MAG welding of low carbon Designed for MAG welding of low carbon Formulated for MAG welding of
Applications

18%Cr-12%Ni-2%Mo stainless steel. Low 18%Cr-12%Ni-2%Mo stainless steels. 18%Cr-12%Ni-2%Mo stainless steels
Typical

carbon content which gives good Low carbon content gives good where increased resistance to pitting
resistance to most types of corrosion of resistance to most types of corrosion of corrosion is required (AISI 316, 316L)
the weld metal. the weld metal (AISI 316L, 316Ti, 316Cb)

1. Designed for welding type 316L 1. Low spatter, easy slag removal and
Characteristics

1.Designed for applications where pitting

corrosion is evident as found in pulp and stainless. Addition of Mo resists pitting good weld soundness.
Of Usage

paper mills corrosion typically brought on by sulphuric 2. Weldability is excellent with lower crack
2. Increased creep resistance at elevated and sulphurous acids susceptibility.
temperature. 2. Weldability is excellent with lower crack
susceptibility.

SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2

Composition
Weld Metal

Carbon 0.03 % 0.03 % Carbon 0.03 % 0.03 % Carbon 0.05 % 0.04 %

Silicon 0.65 % 0.70 % Silicon 0.65 % 0.75 % Silicon 0.60 % 0.76 %
Manganese 1.58 % 1.62 % Manganese 1.20 % 1.85 % Manganese 1.47 % 1.82 %
Chromium 19.4 % 19.2 % Chromium 18.3 % 18.7 % Chromium 18.4 % 18.6 %
Nickel 12.4 % 12.8 % Nickel 12.2 % 11.4 % Nickel 12.0 % 11.5 %
Molybdenum 2.42 % 2.50 % Molybdenum 2.8 % 2.5 % Molybdenum 2.5 % 2.5 %

SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2 SG CO2 Ar+20 % CO2

Mechanical
Properties

T-S (psi) 87,023 89,923 T-S (psi) 79,771 89,923 T-S (psi) 84,122 88,473
El 39 % 38 % El 40 % 38 % El 38 % 37 %

Dia Electrode Dia Electrode Dia Electrode

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) Extension Amp in (mm) Extension Amp

.045 (1.2) .39” - .79” 100-220 .045 (1.2) .39” - .79” 100-240 .045 (1.2) .39” - .79” 100-240
1/16 (1.6) .59” - .98” 160-260 1/16 (1.6) .59” - .98” 160-260 1/16 (1.6) .59” - .98” 160-260
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal Fillets and Groove Welds Flat, Horizontal, Overhead, Vertical Down Flat, Horizontal Fillets and Groove Welds
Welding
Approved

JIS ABS, BV, CWB, DNV, KR, NK, RINA, TUV, ABS, KR, JIS
JIS
(80%Ar + 20%C02 : CWB, TUV)

Supplier... For The Highest Demands

WELDING PRODUCTS
30
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E317LT1-1 AWS E2209T1-1 /-4 AWS E347T1-1

K-317LT K-329T K-347T

Designed for MAG welding of low carbon Formulated for MAG welding of Formulated for MAG welding of
Applications

19%Cr-13%Ni-3%Mo stainless steels. 23%Cr-9%Ni-3%Mo duplex stainless 18%Cr-8%Ni-Nb stainless steels. (AISI
Typical

The principal area of application is steels. Applications are chemical plant 347, 321, ASTM A296;
process and chemical plant, shipbuilding and shipbuilding as well as nuclear plant A157 Gr. C9; A320 Gr. B8C or D)
as well as nuclear plant industries. (AISI industries. (ASTM A185 Gr.51, UNS
316L,316LN, 317L, 317LN, UNS S31726). 531803, DIN 1.4462, JIS 329,11)

1. Self-detaching slag, spray-like arc 1. Produces a weld with easy slag 1. Wire has low spatter, easy slag removal
Characteristics

transfer, excellent weldability and removal and minimal spatter. and good weld soundness.
Of Usage

increased creep resistance at elevated 2. Excellent in pitting corrosion resistance 2. Nb improves resistance to intergranular
temperature. and stress corrosion cracking resistance. corrosion of the weld metal.
2. Higher levels of Mo for increased 3. Weldability is excellent with lower crack
corrosion-resistance. susceptibility.
3. Lower crack susceptibility.

SG CO2 SG CO2 Ar+20 % CO2 SG CO2

Composition
Weld Metal

Carbon 0.03 % Carbon 0.03 % 0.03 % Carbon 0.05 %

Silicon 0.65 % Silicon 0.49 % 0.62 % Silicon 0.63 %
Manganese 1.25 % Manganese 1.67 % 1.83 % Manganese 1.75 %
Chromium 18.8 % Chromium 23.1 % 23.3 % Chromium 19.5 %
Nickel 13.7 % Nickel 9.6 % 9.5 % Nickel 10.5 %
Molybdenum 3.5 % Molybdenum 2.8 % 2.8 % Niobium 0.54 %

SG CO2 SG CO2 Ar+20 % CO2 SG CO2

Mechanical
Properties

T-S (psi) 88,473 T-S (psi) 118,351 119,366 T-S (psi) 98,626
El 33 % El 27 % 27 % El 34 %

Dia Electrode Dia Amp Dia Electrode

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) F H V in (mm) Extension Amp

.045 (1.2) .39” - .79” 100-240 .045 (1.2) 100-240 100-240 120-200 .045 (1.2) .39” - .79” 100-240
1/16 (1.6) .59” - .98” 160-260 1/16 (1.6) 160-260 160-260 160-220 1/16 (1.6) .59” - .98” 160-260
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal, Overhead, Vertical Down Flat, Horizontal, Overhead, Vertical Down Flat, Horizontal, Overhead, Vertical Down
Welding
Approved

ABS, JIS ABS, JIS

Supplier... For The Highest Demands

WELDING PRODUCTS
31
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS EC409 AWS EC409 AWS E410T0-1/-4

K-409Ti K-409TiC K-410T

Developed to meet the needs of the Developed to meet the needs of the Designed for MAG welding of martensite
Applications

automotive exhaust fabricators that automotive exhaust fabricators that stainless alloys of the 13%Cr types. It is
Typical

desired a metal cored wire. It excels in the desired a metal cored wire. It excels in the used for surfacing of sealing faces of
pulsed GMAW mode. pulsed GMAW mode. valves for gas, water and steam piping
system at service temperatures up to
842°F.

1. Designed for high speed welding of 1. Designed also for high speed 1. Designed primarily for welding of
Characteristics

ferritic steels with low spatter and good automotive applications where good bead martinsitic alloys such as the 13 %
Of Usage

bead appearance. appearance and tolerance to joint fit-up chrome types

2. Can out perform solid wires and be variations is desirable. 2. Preheat is recommended. Consult
more tolerant of joint variations with use of material manufacturer for proper
proper procedures. procedures.

SG Ar+2 % O2 SG Ar+2 % O2
Composition

SG CO2 Ar+20 % CO2

Weld Metal

Carbon 0.05 % Carbon 0.03 %

Carbon 0.07 % 0.07 %
Silicon 0.50 % Silicon 0.55 %
Manganese 0.45 % Manganese 0.60 % Silicon 0.20 % 0.32 %
Chromium 12.1 % Chromium 11.4 % Manganese 0.47 % 0.69 %
Titanium 0.7 % Titanium 1.0 % Chromium 13.0 % 13.2 %

SG Ar+2 % O2 SG Ar+2 % O2 SG CO2 Ar+20 % CO2

Mechanical
Properties

T-S (psi) 81,221 T-S (psi) 79,771 Y-S (psi) 76,870 82,672
El 20 % El 20 % El 24 % 22 %

PWHT 1382°Fx1hr. 1382°Fx1hr.

Dia Electrode Dia Electrode Dia Electrode

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) Extension Amp in (mm) Extension Amp

.045 (1.2) .39” - .79” 180-260 .045 (1.2) .39” - .79” 160-240 .045 (1.2) .39” - .79” 100-240
1/16 (1.6) .59” -.98” 1/16 (1.6) .59” -.98” 1/16 (1.6) .59” -.98” 180-270
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal Flat, Horizontal Flat, Horizontal

Welding
Approved

ABS JIS

Supplier... For The Highest Demands

WELDING PRODUCTS
32
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
Tubular Wires Stainless Steel
AWS E410NiMoT0-4 AWS EC430

K-410NiMoT K-430T K-436T

Designed for MAG welding of soft Designed for MAG welding of ferrite Designed for MAG welding of stainless
Applications

martensite stainless alloysof the stainless alloys of the 17%Cr-Ti types. steels of the 17%Cr-1 Mo-Ti types. It is
Typical

13%Cr-4%Ni-Mo types. Suitable for automotive exhaust suitable for automotive exhaust fabricators
(AISI 403, 405, 410, 420, JIS SCS3, SCS6, fabricators such as front pipe, bellows, such as front pipe, bellows, flange, etc.
ASTM CAI 5M, CA6NM) flange, etc. (AISI 430, dissimilar steels) (AISI 430, 430Ti, 431, 436)
(AISI 409, 430Ti, 431, ASTM A1761)

1. For flat and horizontal position welding. 1. For high speed welding. 1. For high speed welding.
Characteristics

2. Features very good ductility, CVN 2. Produces a moderately soft arc and 2. Produces a moderately soft arc and low
Of Usage

toughness and crack resistance. low spatter generation. spatter generation.

3. Provides higher corrosion resistance, 3. Mo component improves good crack
heat resistance due to high alloy designs. resistance and heat resistance.
4. Suitable for surfacing of sealing faces 4. Suitable for surfacing of sealing faces
of gas, water and steam valves. of gas, water and steam valves.

SG Ar+20 % CO2 SG Ar+2 % O2 SG Ar+2 % O2

Composition
Weld Metal

Carbon 0.04 % Carbon 0.02 % Carbon 0.03 %

Silicon 0.23 % Silicon 0.61 % Silicon 0.35 %
Manganese 0.36 % Manganese 0.49 % Manganese 0.63 %
Chromium 12.2 % Chromium 17.5 %
Chromium 16.2 %
Nickel 4.1 % Molybdenum 1.1 %
Nickel 1.0 %
Molybdenum 0.7 % Titanium 0.5 %

SG Ar+20 % CO2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 126,183 Y-P (psi) 68,893 Y-P (psi) 52,939

El 25 % T-S (psi) 77,595 T-S (psi) 69,183
PWHT 1112°F x 1hr. El 25 % El 23 %
PWHT -

Dia Electrode Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) Extension Amp in (mm) F H in (mm) F H

.045 (1.2) .39” - .79” 100-240 .045 (1.2) 120-220 120-240 120-220 120-240
1/16 (1.6) .59” - .79” 180-280 1/16 (1.6)
Packaging

.045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool .045” (1.2 mm) x 33# (15 kg) spool
1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool 1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Flat, Horizontal Fillets and Groove Welds Flat, Horizontal Fillets and Groove Welds Flat, Horizontal Fillets and Groove Welds
Welding
Approved

JIS ABS, BV, DNV, GL, KR, LR, NK

Supplier... For The Highest Demands

WELDING PRODUCTS
33
 Tubular Wires Stainless Steel

K-439T
Designed for MAG welding of stainless
Applications

steels of the 18%Cr-1%Ti types. It is

Typical

suitable for automotive exhaust fabricators

such as front pipe, bellows, flange. (AISI
430, 430Ti, 431)

1. Produces moderately soft arc and low

Characteristics

spatter levels.
Of Usage

2. Deposition rate can be higher than

solid wires with proper welding
procedures.
3. Maintains high tensile strength in high
temperature atmosphere.

SG Ar+2 % O2
Composition
Weld Metal

Carbon 0.03 %
Silicon 0.33 %
Manganese 0.64 %
Chromium 17.8 %
Nickel 0.3 %

SG Ar+2 % O2
Mechanical
Properties

Y-P (psi) 69,908

T-S (psi) 72,664
El 22 %

Dia Electrode
in (mm) Extension Amp Volt
Rec. Parameters
Available Sizes /

.045 (1.2) .39” - .79” 100-240 20-28

1/16 (1.6) .59” - .98” 160-260 23-30
Packaging

.045” (1.2 mm) x 33# (15 kg) spool

1/16” (1.6 mm) x 33# (15 kg) spool

Detailed Packaging Information

Flat, Horizontal Fillets and Groove Welds

Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
34
MIG Wires
Mild Steel
High Tensile Steel
Stainless Steel

WELDING PRODUCTS
Supplier... For The Highest Demands

35
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Mild Steel
AWS ER70S-3 AWS ER70S-3 AWS ER70S-G

KC-25C KC-25M KC-26

Used in virtually all areas of steel Used in virtually all areas of steel Used in virtually all areas of steel
Applications

construction from automotive to pressure construction from automotive to pressure construction from automotive to pressure
Typical

vessel shops, transportation bridges, vessel shops, transportation bridges, vessel shops, transportation bridges,
buildings, railcar and shipbuilding. buildings, railcar and shipbuilding. buildings, railcar and shipbuilding.

1. Suitable for high speed welding of steel 1. Wide range of operability depending on 1. Wide range of operability depending on
Characteristics

sheet by short circuiting transfer in all applications and procedures. Can be applications and procedures. Can be
Of Usage

positions. used in all positions with pulse used in all positions with pulse
2. Stable arc and low spatter loss. equipment. equipment.
3. Applicable to mixture gas(Ar+20% C02). 2. Stable arc and low spatter loss. 2. Stable arc and low spatter loss.
3. Suitable for high speed welding of thick
plates.
Composition

Carbon 0.07 % Carbon 0.07 % Carbon 0.06 %

Weld Metal

Silicon 0.67 % Silicon 0.67 % Silicon 0.80 %

Manganese 1.20 % Manganese 1.20 % Manganese 1.53 %
Phosphorus 0.015 % Phosphorus 0.015 % Phosphorus 0.014 %
Sulphur 0.011 % Sulphur 0.011 % Sulphur 0.010 %

SG CO2 Ar+20 % C02 SG Ar+20 % C02 SG CO2 Ar+20 % C02

Mechanical
Properties

Y-P (psi) 62,366 63,817 Y-P (psi) 63,817 Y-P (psi) 71,068 75,420
T-S (psi) 75,4201 78,320 T-S (psi) 78,320 T-S (psi) 81,221 84,122
El 33 % 30 % El 30 % El 29 % 30 %
V-notch 66 ft/lb @ 0 °F 74 ft/lb @ 0° F V-notch 74 ft/lb @ 0 °F V-notch 81 ft/lb @ 0 °F 89 ft/lb @ 0 °F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F V&OH in (mm) F in (mm) F V&OH

.030 (0.8) 50-120 50-100 .030 (0.8) .030 (0.8)

.035 (0.9) 50-140 50-120 .035 (0.9) 50-200 .035 (0.9) 50-200 50-120
.040 (1.0) 80-250 60-150 .040 (1.0) 70-250 .040 (1.0) 70-250 50-150
.045 (1.2) 100 -350 70-200 .045 (1.2) 100-350 .045 (1.2) 100-350 50-180
.052 (1.4) 140-400 100-250 .052 (1.4) 140-400 .052 (1.4) 140-400 100-250
1/16 (1.6) 200-450 120-300 1/16 (1.6) 200-550 1/16 (1.6) 200-550 120-300
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All position with proper equipment and All position with proper equipment and All position with proper equipment and
Welding

procedures. procedures. procedures.

Approved

ABS, CWB, DNV, KR, LR, NK, JIS, KS ABS, BV, DNV, GL, KR, LR, NK, JIS, KS

Supplier... For The Highest Demands

WELDING PRODUCTS
36
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Mild Steel
AWS ER70S-G AWS ER70S-6 AWS ER70S-2

KC-27 KC-28C KC-70S2

Butt and Fillet welding of vehicles, steel Butt and Fillet welding of vehicles, Butt and Fillet welding of vehicles, cars,
Applications

frames, bridges, machinery and building, ships, machinery and bridges in ships, machinery and bridges.
Typical

shipbuilding. all positions.

1. Stable arc, low spatter loss and less 1. Good arc characteristics in all positions 1. Arc is very stable and can be used for
Characteristics

slag formation. due to triple deoxidizing alloy content. welding steels which have a rusty or
Of Usage

2. Deposited weld metal has excellent 2. Surface tension is conducive to all scaling surface oxide(AI, Ti, Zr).
notch toughness. position welding especially in open root 2. Excellent for all position welding,
3. Excellent bead appearance when used pipe or plate welding. particularly in pipe welding root passes in
with argon Co2 gas shielding. Mig or Tig . Weld bead wets out with good
surface tension to support open root welds.

Carbon 0.07 %
Composition

Carbon 0.07 % Carbon 0.07 %

Weld Metal

Silicon 0.54 %
Silicon 0.62 % Silicon 0.86 %
Manganese 1.18 %
Manganese 1.18 % Manganese 1.53 % Titanium 0.07 %
Phosphorus 0.014% Phosphorus 0.012 % Aluminum 0.08 %
Sulphur 0.010% Sulphur 0.007 % Zirconium 0.05 %

SG Ar+20 % C02 SG CO2 Ar+20 % C02 SG CO2 Ar+20 % C02

Mechanical
Properties

Y-P (psi) 71,068 Y-P (psi) 65,267 69,618 Y-P (psi) 71,068 79,771
T-S (psi) 81,221 T-S (psi) 79,771 84,122 T-S (psi) 79,771 88,473
El 31 % El 30 % 28 % El 29 % 26 %
V-notch 118 ft/lb @ 0 °F V-notch 52 ft/lb @ -20 °F 52 ft/lb @ -20 °F V-notch 59 ft/lb @ -20 °F 37 ft/lb @ -20 °F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F V&OH in (mm) F V&OH in (mm) F V&OH

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) 50-200 50-120 .035 (0.9) 50-200 50-120
.040 (1.0) .040 (1.0) 70-250 50-150 .040 (1.0) 70-250 50-150
.045 (1.2) 100-350 50-180 .045 (1.2) 100-350 50-180 .045 (1.2) 100-350 50-180
.052 (1.4) 140-400 100-250 .052 (1.4) 140-400 100-250 .052 (1.4) 140-400 100-250
1/16 (1.6) 200-550 120-300 1/16 (1.6) 200-550 120-300 1/16 (1.6) 200-550 -
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All position with proper equipment and All position with proper equipment and All position with proper equipment and
Welding

procedures. procedures. procedures.

Approved

ABS, DNV, NK, JIS ABS, BV, CCS, CWB, DNV, GL, LR, KR,
NK, TUV, JIS, KS

Supplier... For The Highest Demands

WELDING PRODUCTS
37
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Mild Steel
AWS ER70S-G AWS ER80S-G

ZO-55 ZO-60
Butt and Fillet welding of mild steel and Construction machinery, bridges and
Applications

768 ksi class high tensile strength steel. storage tanks.

Typical

Construction equipment, bridges and Butt and H-fillet welding of 839 ksi class
buildings. high tensile strength steel.

1. Excellent mechanical properties 1. Arc is very stable, spatter is less and

Characteristics

obtained under high heat input and weldability is excellent even in high
Of Usage

interpass temp. welding current range.

2. Excellent productivity in both fillet and 2. High working efficiency is obtained by
groove welding in both low and high heat automatic and semi-automatic welding
inputs. due to high deposition rate and deep
penetration.

Carbon 0.07 % Carbon 0.07 %

Composition
Weld Metal

Silicon 0.92 % Silicon 0.84 %

Manganese 1.92 % Manganese 1.95 %
Titanium 0.18 % Molybdenum 0.31 %
Titanium 0.17 %

SG CO2 CO2 SG CO2 Ar+20% C02

Mechanical
Properties

Y-P (psi) 84,122 68,168

Y-P (psi) 79,771 84,122
T-S (psi) 92,824 81,221
El 27 % 29 % T-S (psi) 92,824 95,725
IV 170(17) 32 °F 120(12) 32 °F El 27 % 28 %
Welding 18KJ/cm,302 °F 40KJ/cm,662 °F V-notch 81 ft/lb @ 0 °F 103 ft/lb @ 0 °F

Dia Amp Dia Amp

in (mm) F V&OH in (mm) F V&OH
Rec. Parameters
Available Sizes /

.030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0)
.045 (1.2) 100-350 50-180 .045 (1.2) 120-350 80-180
.052 (1.4) 140-400 100-250 .052 (1.4) 150-400 100-250
1/16 (1.6) 200-550 120-300 1/16 (1.6) 200-500 120-300
Packaging

Detailed Packaging Information Detailed Packaging Information

All position with proper equipment and All position with proper equipment and
Positions
Welding

procedures. procedures.

NK, JIS
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
38
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires High Tensile Steel
AWS ER80S-D2 AWS ER80S-B2 AWS ER90S-B3

KC-80D2 KC-80SB2 KC-90SB3

Applications

Butt and Fillet welding of construction 1.25%Cr-0.5 Mo heat resistant steels. 2.25%Cr-1% Mo heat resistant steels.
equipment, boiler, low alloy steels and
Typical

0.5%Mo alloy steel.

1. Used for welding steels employed at 1. Argon rich gas mixtures are 1. Argon rich gas mixtures are
Characteristics

elevated temperatures up to 932 °F. recommended. recommended.

Of Usage

2. Where joint thickness is critical, it is 2. Excellent mechanical and toughness 2. Excellent mechanical and toughness
important to apply the correct preheating properties after PWHT. properties after PWHT.
and interpass temperatures. 3. Post weld heat treatment may be 3. Post weld heat treatment may be
advisable. Follow manufacturer’s advisable. Follow manufacturer’s
recommendations. recommendations.
Composition

Carbon 0.08 % Carbon 0.09 % Carbon 0.09 %

Weld Metal

Silicon 0.58 % Silicon 0.54 % Silicon 0.47 %

Manganese 1.85 % Manganese 0.51 % Manganese 0.66 %
Molybdenum 0.46 % Chromium 1.26 % Chromium 2.31 %
Molybdenum 0.45 % Molybdenum 1.0 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

Y-P (psi) 88,473 Y-P (psi) 72,519 Y-P (psi) 82,672

T-S (psi) 100,076 T-S (psi) 84,122 T-S (psi) 95,725
El 23 % El 25 % El 24 %
V-Notch 44 ft/lb @ -20 °F V-Notch 59 ft/lb @ 32 °F V-Notch 59 ft/lb @ 0 °F

Dia Amp Dia Amp Dia Amp

Rec. Parameters
Available Sizes /

in (mm) F V&OH in (mm) F V&OH in (mm) F V&OH

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) 50-180 50-120 .035 (0.9) .035 (0.9)
.040 (1.0) 80-250 60-150 .040 (1.0) .040 (1.0)
.045 (1.2) 120-350 70-200 .045 (1.2) 100-350 50-180 .045 (1.2) 100-350 50-180
.052 (1.4) 140 -400100-250 .052 (1.4) 140-400 100-250 .052 (1.4) 140-400 100-250
1/16 (1.6) 220-450 120-250 1/16 (1.6) 200-550 120-300 1/16 (1.6) 200-550 120-300
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All position with proper equipment and All position with proper equipment and All position with proper equipment and
Welding

procedures. procedures. procedures.

Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
39
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER2209 AWS ER308 AWS ER308H

M-2209 M-308 M-308H

Welding of 23%Cr-9%Ni-3%Mo stainless Welding of 18%Cr-8%Ni stainless steels Welding of high carbon 18%Cr-8%Ni
Applications

steels (UNS S31803, STS 329J1/329J2L). (AISI 301, 302, 304). It provides better stainless steels (AISI 304H). It provides
Typical

Various applications of chemical weldability together with excellent better weldability together with excellent
engineering, shipbuilding and nuclear corrosion resistance. corrosion resistance.
plant industries, etc.

1. 2209 is a duplex stainless steel for 1. Designed for welding types 301, 302, 1. Product is designed primarily for
Characteristics

welding type 2205 duplex stainless. 304, 304L, 308 and 308L grades of welding of type 304H and and 347H
Of Usage

2. Has a high resistance to corrosive austenitic grades of stainless steels austenitic stainless steels when high
medias such as chlorides and hydrogen 2. Can also be used to weld grades 321 temperature services are required.
sulfides and 347 when service temperatures do
3. Good resistance to intergranular, pitting not exceed 600°F.
and stress corrosion cracking.

Carbon 0.01 %
Composition

Carbon 0.04 % Carbon 0.05 %

Weld Metal

Silicon 0.40 %
Silicon 0.38 % Silicon 0.42 %
Manganese 1.75 %
Nickel 8.70 % Manganese 1.90 % Manganese 2.06 %
Chromium 22.70 % Nickel 9.80 % Nickel 9.70 %
Molybdenum 3.20 % Chromium 19.80 % Chromium 19.90 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 121,832 T-S (psi) 88,473 T-S (psi) 85,572

El 28 % El 40 % El 44 %
IV (J) -51°F:110 IV (J) RT:110 IV (J) -
-321°F:50 -40°F:82

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All position welding is possible with the All position welding is possible with the All position welding is possible with the
Welding

use of proper welding equipment and use of proper welding equipment and use of proper welding equipment and
procedures. procedures. procedures.
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
40
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER308L AWS ER308LSi AWS ER309LMo

M-308L M-308LSi M-309LMo

Welding of low carbon 18%Cr-8%Ni Welding of low carbon 18%Cr-8%Ni Suitable for dissimilar metal joint and
Applications

stainless steels (AISI 304L, 308L). It stainless steels (AISI 304L, 308L). The underlaying on ferritic steels for overlaying
Typical

provides better weldability together with high silicon content improves the welding stainless steel weld metals.
excellent corrosion resistance. properties, such as wetting.

1. Designed for welding types 301, 302, 1. Designed for use for most austenitic 1. Primarily for welding type 316 stainless
Characteristics

304, 304L, 308 and 308L grades of grades that normally use the 308 grade, clad steels on the root pass and some
Of Usage

austenitic grades of stainless steels. but with added silicon that greatly dissimilar metals with additions of Mo.
2. Can also be used to weld grades 321 enhances wetting of the weld bead. This 2. Also used for welding of austenitic
and 347 when service temperatures do enhances the cosmetics of the bead stainless alloys to carbon steels.
not exceed 600°F. appearance when required . 3. Service temperatures should not
exceed 750°F.

Carbon 0.02 %
Composition

Carbon 0.02 % Carbon 0.02 %

Weld Metal

Silicon 0.75 %
Silicon 0.38 % Silicon 0.75 %
Manganese 1.45 %
Manganese 1.90 % Manganese 1.95 % Nickel 14.5 %
Nickel 9.80 % Nickel 10.40 % Chromium 23.20 %
Chromium 19.80 % Chromium 19.70 % Molybdenum 2.61 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 82,672 T-S (psi) 85,572 T-S (psi) 95,725

El 44 % El 42 % El 33 %
IV (J) 32 °F:90 IV (J) 32 °F:110 IV (J) 32 °F:92
-321 °F:82 -321 °F:60 -40 °F:89

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All position welding possible with proper All position welding possible with proper All position welding possible with proper
Welding

welding equipment and procedures. welding equipment and procedures. welding equipment and procedures.
Approved

CWB, TUV

Supplier... For The Highest Demands

WELDING PRODUCTS
41
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER309LSi AWS ER310 AWS ER312

M-309LSi M-310 M-312

Welding of austenitic stainless alloys of Welding of heat-resistant austenitic steels Welding of stainless steel of the
Applications

the 22%Cr-12%Ni low carbon types and of the 25%Cr-20%Ni types(STS310S). 29%Cr-9%Ni types. Wire is widely used
Typical

for joining stainless steels to non-alloy or It has good general oxidation resistance, for joining of dissimilar metals such as
low-alloy steels. The high silicon content especially at high temperature. carbon steel to stainless steel.
improves the welding properties, such as
wetting.

1. Designed primarily for the joining of 309 1. Developed primarily for welding type 1. Type 312 was originally designed to join
Characteristics

stainless where good wetting and bead 310 stainless. high temperature heat resistant alloys as
Of Usage

appearance are important. 2. Can also be used to join types 410 and well as strength high alloy steels to
2. The additional silicon aids in smooth 430 stainless when preheating and heat themselves and some dissimilar metals
bead contour and superior wetting into the treatment are not practical. 2. 312 can also be used to join some
adjacent base metal. abrasion resistant steels.
3. Service temperatures below 750°F.
Composition

Carbon 0.02 % Carbon 0.10 % Carbon 0.10 %

Weld Metal

Silicon 0.75 % Silicon 0.10 % Silicon 0.43 %

Manganese 2.28 % Manganese 1.73 % Manganese 1.72 %
Nickel 13.70 % Nickel 20.90 % Nickel 8.70 %
Chromium 23.20 % Chromium 26.60 % Chromium 30.40 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 85,572 T-S (psi) 87,023 T-S (psi) 105,878

El 40 % El 40 % El 30 %
IV (J) 32 °F:90 IV (J) 32 °F:110 IV (J) -

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Can be used in all positions with pulsed Can be used in all positions with pulsed Can be used in all positions with pulsed
Welding

welding equipment and good welding welding equipment and good welding welding equipment and good welding
procedures. Non- pulsed welding is more procedures. Non- pulsed welding is more procedures. Non- pulsed welding is more
limited to flat and horizontal welding. limited to flat and horizontal welding. limited to flat and horizontal welding.
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
42
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER316 AWS ER316L AWS ER316LSi

M-316 M-316L M-316LSi

Welding of stainless steel of Welding of austenitic stainless alloys of Welding of austenitic stainless alloys of
Applications

18%Cr-12%Ni-Mo types (STS316). the 18%Cr-12%Ni-Mo low carbon types. the 18%Cr-12%Ni-Mo low carbon types.
Typical

The low ferrite content improves the The alloy has particularly good The high silicon content improves the
crack-resistance and corrosion corrosion-resistance and heat-resistance. welding properties, such as wetting.
resistance.

Designed for use on type 316 austenitic Designed for use on type 316 L and 316 1. Designed for use for type 316L grade
Characteristics

stainless steels. grade austenitic stainless steels. stainless steel.

Of Usage

2 The additional silicon greatly enhances

wetting of the weld bead that enhances
the cosmetics of the bead appearance
when required.

Carbon 0.04 % Carbon 0.02 % Carbon 0.02 %

Composition
Weld Metal

Silicon 0.40 % Silicon 0.39 % Silicon 0.76 %

Manganese 1.62 % Manganese 1.89 % Manganese 1.85 %
Nickel 12.10 % Nickel 11.80 % Chromium 12.20 %
Chromium 18.40 % Chromium 18.60 % Nickel 18.70 %
Molybdenum 2.30 % Molybdenum 2.20 % Molybdenum 2.30 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 84,122 T-S (psi) 84,122 T-S (psi) 82,672

El 38 % El 38 % El 30 %
IV (J) 32°F:100 IV (J) 32°F:90 IV (J) 32°F:110
385 °F:50 385 °F:62 -321 °F:40

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Can be used in all positions with pulsed Can be used in all positions with pulsed Can be used in all positions with pulsed
Welding

welding equipment and good welding welding equipment and good welding welding equipment and good welding
procedures. Non-pulsed welding is more procedures. Non-pulsed welding is more procedures. Non-pulsed welding is more
limited to flat and horizontal welding. limited to flat and horizontal welding. limited to flat and horizontal welding.
Approved

BV, DNV, KR ABS, TUV

Supplier... For The Highest Demands

WELDING PRODUCTS
43
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER317L AWS ER347 AWS ER409Nb

M-317L M-347 M-409Nb

Welding of stainless alloys of the Welding of stainless alloys of the Welding of ferrite stainless alloys of the
Applications

19%Cr-12%Ni-3.5%Mo low carbon types 18%Cr-9%Ni-Nb(Ti) types (STS 321, 347). 13%Cr types (AISI409). It is suitable for
Typical

(STS317, 317L). Various applications of Nb component improves the resistance to automotive exhaust fabricators such as
chemical engineering, shipbuilding and intergranular corrosion of the weld metal. front pipe, bellows, flange.
nuclear plant industries, etc.

1. Recommended for welding type 317 and 1. Designed for welding of grades 347 1. This product was designed for welding
Characteristics

317L stainless steels with up to .04 % and 321 stabilized austenitic stainless Niobium stabilized stainless.
Of Usage

carbon in the weld deposit. steels. 2. The added Nb helps to form stable
2. The higher Molybdenum content 2. Operating temperatures should not carbides that promote improved
increases the resistance to pitting exceed 750 °F. resistance to corrosion with stronger
corrosion. properties at elevated temperatures.

Carbon 0.02 % Carbon 0.05 % Carbon 0.01 %

Composition
Weld Metal

Silicon 0.48 % Silicon 0.46 % Silicon 0.45 %

Manganese 1.09 % Manganese 2.24 % Manganese 0.46 %
Nickel 13.10 % Nickel 9.30 % Nickel 0.23 %
Chromium 18.90 % Chromium 19.30 % Chromium 11.40 %
Molybdenum 3.40 % Niobium/Tantalum 0.60 % Niobium/Tantalum 0.36 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 92,824 T-S (psi) 92,824 T-S (psi) 4,438 (1562°F)
El 40 % El 41 % El 56 %
IV (J) - IV (J) - IV (J) -

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

Can be used in all positions with the use Can be used in all positions with the use Can be used in all positions with the use
Welding

of pulsed welding equipment and proper of pulsed welding equipment and proper of pulsed welding equipment and proper
welding procedures. welding procedures. welding procedures.
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
44
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
MIG Wires Stainless Steel
AWS ER410 AWS ER420 AWS ER430

M-410 M-420 M-430

Welding of martensite stainless alloys of Welding of martensite stainless alloys of Welding of ferrite stainless alloys of the
Applications

the 13%Cr types (STS 403, 410). the 13%Cr types (STS 420). 17%Cr types (AISI 430, dissimilar
Typical

The alloy is suitable for the first layer of The alloy is suitable for the first layer of steels). It is suitable for automotive
corrosion resistant weld claddings. corrosion resistant weld claddings. exhaust fabricators such as front pipe,
bellows, flange.

1. Alloy 410 is used to weld Types 403, 1. Type 420 is a martensitic stainless 1. Alloy 430 is a ferritic stainless which
Characteristics

405, 410 and 416. steel that provides corrosion resistance provides good ductility in heat-treated
Of Usage

2. Alloy 410 is also used for welding similar to Type 410 plus increased condition.
overlay on carbon steels to resist strength and hardness 2. Used in the application of welding
corrosion, erosion, or abrasion. 2. Typical uses include cutlery, similar alloys as well as for overlays and
surgical and dental instruments, thermal spraying.
scissors, tapes and straight edges. 3. A minimum of 300ºF before welding.

Carbon 0.02 % Carbon 0.33 % Carbon 0.02 %

Composition
Weld Metal

Silicon 0.34 % Silicon 0.41 % Silicon 0.33 %

Manganese 0.39 % Manganese 0.37 % Manganese 0.44 %
Nickel - Nickel - Nickel -
Chromium 12.80 % Chromium 12.70 % Chromium 16.60 %

SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2

Mechanical
Properties

T-S (psi) 78,320 T-S (psi) - T-S (psi) 73,969

El 35 % El - El 35 %
Remark PWHT:1373 °F x 1hr 5%H2SO4 - Remark PWHT:1373 °F x 1hr

Dia Dia Dia

Rec. Parameters
Available Sizes /

in (mm) in (mm) in (mm)

.030 (0.8) .030 (0.8) .030 (0.8)

.035 (0.9) .035 (0.9) .035 (0.9)
.040 (1.0) .040 (1.0) .040 (1.0)
.045 (1.2) .045 (1.2) .045 (1.2)
.052 (1.4) .052 (1.4) .052 (1.4)
1/16 (1.6) 1/16 (1.6) 1/16 (1.6)
Packaging

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
45
TIG Wires
Mild Steel
Stainless Steel

WELDING PRODUCTS
Supplier... For The Highest Demands
46
 TIG Wires Mild Steel
AWS ER70S-2 AWS ER80S-D2 AWS ER80S-B2

T-70S2 T-80D2 T-80SB2

Excellent wire for Tig or Mig welding of For use on carbon and low alloy steels For welding of 1.25% Cr / 0.5 Mo heat
Applications

most grades of carbon steels, pipe, such as 4130 when matching tensile resisting steels.
Typical

offshore drilling rigs and structural steels. strength or PWHT is required.

1. Multiple deoxidized rod containing small 1. Gives high strength welds on high 1. Ar gas is used for shielding.
Characteristics

amounts of zirconium, titanium and sulphur bearing steels or medium carbon 2. Excellent mechanical and toughness
Of Usage

aluminum in addition to the manganese steels. properties after PWHT.

and silicon deoxidizers. 2. Contains additional amounts of 3. Preheat at 212° to 392 °F and post weld
2. Produces superior quality welds with manganese and silicon which produces heat treatment at 1148 °F to 1328 °F.
minimum porosity even over rust and mill weld deposits with high ductility, excellent
scale. impact values and tensile strength.

Carbon 0.07 %
Composition

Carbon 0.08 % Carbon 0.09 %

Weld Metal

Silicon 0.54 %
Silicon 0.63 % Silicon 0.54 %
Manganese 1.18 %
Titanium 0.07 % Manganese 1.85 % Manganese 0.51 %
Aluminum 0.08 % Molybdenum 0.50 % Chromium 1.26 %
Zirconium 0.04 % Molybdenum 0.45 %

Y-P 71,068 Y-P 88,473 Y-P 72,519

Mechanical
Properties

T-S (psi) 82,672 T-S (psi) 101,526 T-S (psi) 85,572

El 29 % El 22 % El 26 %
V-Notch 133 ft/lb @ -20 °F V-Notch 133 ft/lb @ -20 °F V-Notch 59 ft/lb @ 32 °F

Dia Length Amp Dia Length Amp Dia Length Amp

Rec. Parameters
Available Sizes /

in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH in (mm) in (mm) F V&OH

1/16" (1.6) 39(1000) 30-150 30-130 1/16" (1.6) 39(1000) 30-150 30-130 1/16" (1.6) 39(1000) 30-150 30-130
3/32" (2.4) 39(1000) 40-200 40-180 3/32" (2.4) 39(1000) 40-200 40-180 3/32" (2.4) 39(1000) 40-200 40-180
1/8" (3.0) 39(1000) 50-250 50-210 1/8" (3.0) 39(1000) 50-250 50-210 1/8" (3.0) 39(1000) 50-250 50-210
5/32"(4.0) 39(1000) 70-325 70-280 5/32"(4.0) 39(1000) 70-325 70-280 5/32"(4.0) 39(1000) 70-325 70-280
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
47
 TIG Wires Mild Steel
AWS ER90S-B3

T90SB3
Designed for welding 2.25% Cr, 1% Mo
Applications

alloy steels
Typical

1.Designed for single and multi-pass

Characteristics

welding of 2.25% Cr, 1%Mo alloy steels.

Of Usage

2. Excellent mechanical and toughness

properties after PWHT.
3. Preheat at 300° to 570°F and post weld
heat treatment at 1256° to 1346°F .

Carbon 0.09 %
Composition
Weld Metal

Silicon 0.47 %
Manganese 0.66 %
Chromium 2.31 %
Molybdenum 1.0 %

Y-P (psi) 79,771

Mechanical
Properties

T-S (psi) 97,175

El 26 %
V-Notch 133 ft/lb @ 32°F

Dia Length Amp

in (mm) in (mm) F V&OH
Rec. Parameters
Available Sizes /

1/16" (1.6) 39(1000) 30-150 30-130

3/32" (2.4) 39(1000) 40-200 40-180
1/8" (3.0) 39(1000) 50-250 50-210
5/32"(4.0) 39(1000) 70-325 70-280
Packaging

10# (5 kg) carton

Detailed Packaging Information

All Welding Positions

Positions
Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
48
 Call Customer Service
For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER2209 AWS ER308 AWS ER308H

T-2209 T-308 T-308H

Welding of 23%Cr-9%Ni-3%Mo stainless Welding of 18%Cr-8%Ni stainless steels Welding of high carbon 18%Cr-8%Ni
Applications

steels (UNS S31803, STS 329J1/329J2L). (AISI 301, 302, 304). It provides better stainless steels (AISI 304H). It provides
Typical

Various applications of chemical weldability together with excellent better weldability together with excellent
engineering, shipbuilding and nuclear corrosion resistance. corrosion resistance.
plant industries etc.

Duplex stainless steels are typically used 304 stainless steel are typically used in 1. Product is designed primarily for
Characteristics

in: fabrication of: welding of type 304H and and 347H

Of Usage

1. Chemical processing, transport and 1. Sinks and kitchen appliances austenitic stainless steels when high
storage 2. Cutlery and flatware temperature services are required.
2. Oil and gas refining 3. Brewery, dairy product equipment, food
3. Pulp & paper manufacturing and pharmaceutical production
equipment

Carbon 0.01 %
Composition

Carbon 0.04 % Carbon 0.05 %

Weld Metal

Silicon 0.40 % Silicon 0.42 %

Silicon 0.38 %
Manganese 1.75 %
Manganese 1.90 % Manganese 2.06 %
Nickel 8.70 %
Chromium 22.70 % Nickel 9.80 % Nickel 9.80 %
Molybdenum 3.20 % Chromium 19.80 % Chromium 19.80 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 118,206 T-S (psi) 84,122 T-S (psi) 85,572

El 35 % El 42 % El 42 %
IV (J) -51°F:136 IV (J) 32 °F:150 IV (J) -
-321 °F:40

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

12
.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5)
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5)
5/64 (2.0) 39 (1000) 11 (5) 5/64 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5)
3/32 (2.4) 39 (1000) 11 (5) 3/32 (2.6) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5)
1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5)
5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS

Supplier... For The Highest Demands

WELDING PRODUCTS
49
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER308L AWS ER308LSi AWS ER309

T-308L T-308LSi T-309

Welding of low carbon 18%Cr-8%Ni Welding of low carbon 18%Cr-8%Ni Welding of similar alloys in wrought or
Applications

stainless steels (AISI 301, 302, 304L, stainless steels (AISI 304L, 308L). The cast forms. Welding of dissimilar steels,
Typical

308L). It provides better weldability high silicon content improves the welding such as 304L to mild steel or low alloy
together with excellent corrosion properties, such as wetting. steels.
resistance.

304 stainless steel are typically used in 1. Designed for use with most austenitic 1. Used for welding of carbon steel to
Characteristics

fabrication of: grades that normally use the 308 grade, stainless steels.
Of Usage

1. Sinks and kitchen appliances but with added silicon that greatly 2. Also used for overlay cladding of carbon
2. Cutlery and flatware enhances wetting of the weld bead. This and alloy steels.
3. Brewery, dairy product equipment, food enhances the cosmetics of the bead 3. Intended for service temperatures
and pharmaceutical production appearance when required . below 600° F.
equipment
Composition

Carbon 0.02 % Carbon 0.02 % Carbon 0.05 %

Weld Metal

Silicon 0.38 % Silicon 0.75 % Silicon 0.36 %

Manganese 1.90 % Manganese 1.95 % Manganese 1.84 %
Nickel 9.80 % Nickel 10.4 % Nickel 13.3 %
Chromium 19.80 % Chromium 19.7 % Chromium 23.60 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 84,122 T-S (psi) 84,122 T-S (psi) 88,473

El 44 % El 43 % El 40 %
IV (J) 32 °F:160 IV (J) 32 °F:180 IV (J) 32 °F:150
-321 °F:80 -321 °F:80

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000)
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000)
5/64 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000)
3/32 (2.6) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000)
1/8 (3.2) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000)
5/32 (4.0) 39 (1000) 11 (5)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

BV, LR, DNV, KR, TUV CWB

Supplier... For The Highest Demands

WELDING PRODUCTS
50
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER309L AWS ER309LSi AWS ER310

T-309L T-309LSi T-310

Welding of similar alloys in wrought or Welding of austenitic stainless alloys of Welding of heat-resistant austenitic steels
Applications

cast forms and clad side of type 304L the 22%Cr-12%Ni low carbon types and of the 25%Cr-20%Ni types(STS310S).
Typical

clad steels. The low ferrite content for joining stainless steels to non-alloy or It has good general oxidation resistance,
improves the crack-resistance and low-alloy steels. The high silicon content especially at high temperature.
corrosion-resistance. improves the welding properties, such as
wetting.

1. Used for welding of carbon steel to 1. Silicon enhanced version of the 309L 1. Designed for welding of 310 stainless
Characteristics

stainless steels. product that significantly improves the steels for high temperature applications.
Of Usage

2. Also used for overlay cladding of carbon wetting out of the weld bead and base 2. Typical uses include oven linings,
and alloy steels. metal transitions. furnace components, annealing covers
3. Intended for service temperatures 2. Used on dissimilar welding, carbon to and fire box sheets.
below 600°F. stainless and corrosion cladding
applications.
Composition

Carbon 0.01 % Carbon 0.02 % Carbon 0.10 %

Weld Metal

Silicon 0.40 % Silicon 0.75 % Silicon 0.43 %

Manganese 1.92 % Manganese 2.28 % Manganese 1.73 %
Nickel 13.80 % Nickel 13.70 % Nickel 20.90 %
Chromium 23.20 % Chromium 23.20 % Chromium 26.60 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 85,572 T-S (psi) 79,771 T-S (psi) 87,023

El 42 % El 42 % El 40 %
IV (J) 32 °F:110 IV (J) 32 °F:120 IV (J) 32 °F:110

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5)
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5)
3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5 3/32 (2.0) 39 (1000) 11 (5)
1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5)
5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

BV, LR, DNV, KR

Supplier... For The Highest Demands

WELDING PRODUCTS
51
 Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER312 AWS ER316 AWS ER316L

T-312 T-316 T-316L

Welding of stainless steel of the Welding of stainless steel of Welding of austenitic stainless alloys of
Applications

29%Cr-9%Ni types. Wire is widely used 18%Cr-12%Ni-Mo types (STS316). the 18%Cr-12%Ni-Mo low carbon types.
Typical

for joining of dissimilar metals such as The low ferrite content improves the The alloy has particularly good
carbon steel to stainless steel. crack-resistance and corrosion corrosion-resistance and heat-resistance.
resistance.

1. Type 312 was originally designed to join Designed for use on type 316 austenitic Designed for use on type 316 L and 316
Characteristics

high temperature heat resistant alloys as stainless steels. grade austenitic stainless steels.
Of Usage

well as strength high alloy steels to

themselves and some dissimilar metals
2. 312 can also be used to join some
abrasion resistant steels.

Carbon 0.04 % Carbon 0.02 %

Composition

Carbon 0.10 %
Weld Metal

Silicon 0.40 % Silicon 0.39 %

Silicon 0.43 %
Manganese 1.62 % Manganese 1.85 %
Manganese 1.73 % Nickel 12.10 % Nickel 12.20 %
Nickel 8.7 % Chromium 18.40 % Chromium 18.70 %
Chromium 30.4 % Molybdenum 2.30 % Molybdenum 2.30 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 114,580 T-S (psi) 82,672 T-S (psi) 81,221

El 25 % El 40 % El 40 %
IV (J) - IV (J) 32 °F:140 IV (J) 32 °F:150
-321 °F:50 -321 °F:50

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) )
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000)
3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000)
1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000)
5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

ABS, BV, LR, DNV, KR, TUV

Supplier... For The Highest Demands

WELDING PRODUCTS
52
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER316LSi AWS ER317L AWS ER347

T-316LSi T-317L T-347

Welding of austenitic stainless alloys of Welding of stainless alloys of the Welding of stainless alloys of the
Applications

the 18%Cr-12%Ni-Mo low carbon types. 19%Cr-12%Ni-3.5%Mo low carbon types 18%Cr-9%Ni-Nb(Ti) types (STS 321, 347).
Typical

The high silicon content improves the (STS317, 317L). Various applications of Nb component improves the resistance to
welding properties, such as wetting. chemical engineering, shipbuilding and intergranular corrosion of the weld metal.
nuclear plant industries etc.

1. Designed for use for type 316L grade 1. Recommended for welding type 317 1. This product was designed for welding
Characteristics

stainless steel. and 317L stainless steels with up to .04% 347 Niobium stabilized stainless.
Of Usage

2. The additional silicon greatly enhances carbon in the weld deposit. 2. The added Nb helps to form stable
wetting of the weld bead that enhances 2. The higher Molybdenum content carbides that promote improved
the cosmetics of the bead appearance increases the resistance to pitting resistance to corrosion with stronger
when required . corrosion. properties at elevated temperatures.

Carbon 0.02 % Carbon 0.02 % Carbon 0.05 %

Composition
Weld Metal

Silicon 0.76 % Silicon 0.49 % Silicon 0.46 %

Manganese 1.85 % Manganese 1.85 % Manganese 2.24 %
Nickel 12.20 % Nickel 14.10 % Nickel 9.30 %
Chromium 18.70 % Chromium 18.70 % Chromium 19.30 %
Molybdenum 2.30 % Molybdenum 3.40 % Niobium/Tantalum 0.60 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 81,221 T-S (psi) 81,221 T-S (psi) 91,374

El 40 % El 40 % El 40 %
IV (J) 32 °F:150 IV (J) 32 °F:150 IV (J) 32 °F:90
-321 °F:50 -321 °F:50 -321 °F:36

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000)
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000)
3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000)
1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000)
5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
53
 Call Customer Service Call Customer Service Call Customer Service
For Availability: 1.877.754.7935 For Availability: 1.877.754.7935 For Availability: 1.877.754.7935
TIG Wires Stainless Steel
AWS ER410 AWS ER420 AWS ER430

T-41O T-420 T-430

Welding of martensite stainless alloys of Welding of martensite stainless alloys of Welding of ferrite stainless alloys of the
Applications

the 13%Cr types (STS 403, 410). The alloy the 13%Cr types (STS 420). The alloy is 17%Cr types (ASI 430, dissimilar steels).
Typical

is suitable for the first layer of corrosion suitable for the first layer of corrosion It is suitable for automotive exhaust
resistant weld claddings. resistant weld claddings. fabricators such as front pipe, bellows,
flange.

1. Alloy 410 is used to weld Types 403, 1. Type 420 is a martensitic stainless 1.Ferritic stainless which provides good
Characteristics

405, 410 and 416. steel that provides corrosion resistance ductility in heat-treated condition.
Of Usage

2. Alloy 410 is also used for welding similar to Type 410 plus increased 2. It is also used in the application of
overlay on carbon steels to resist strength and hardness welding similar alloys as well as for
corrosion, erosion, or abrasion. 2. Typical uses include cutlery, overlays and thermal spraying.
surgical and dental instruments, 3. A minimum of 300ºF is recommended
scissors, tapes and straight edges. before welding.
Composition

Carbon 0.02 % Carbon 0.33 % Carbon 0.02 %

Weld Metal

Silicon 0.34 % Silicon 0.41 % Silicon 0.33 %

Manganese 0.39 % Manganese 0.37 % Manganese 0.44 %
Nickel - Nickel - Nickel -
Chromium 12.80 % Chromium 12.70 % Chromium 16.60 %

SG Ar SG Ar SG Ar
Mechanical
Properties

T-S (psi) 76,870 T-S (psi) - T-S (psi) 72,519

El 37 % El - El 33 %
Remark PWHT:1373 °F x 1hr IV(J) - Remark PWHT:1373 °F x 1hr

Dia Length Weight Dia Length Weight Dia Length Weight

Rec. Parameters
Available Sizes /

in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg) in (mm) in (mm) lb(kg)

.045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5) .045 (1.2) 39 (1000) 11 (5)
1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5) 1/16 (1.6) 39 (1000) 11 (5)
3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5) 3/32 (2.0) 39 (1000) 11 (5)
1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5) 1/8 (3.2) 39 (1000) 11 (5)
5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5) 5/32 (4.0) 39 (1000) 11 (5)
Packaging

10# (5 kg) carton 10# (5 kg) carton 10# (5 kg) carton

Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information

Positions

All Welding Positions All Welding Positions All Welding Positions

Welding
Approved

Supplier... For The Highest Demands

WELDING PRODUCTS
54
Packaging
Information

WELDING PRODUCTS
Supplier... For The Highest Demands

55
Covered Electrodes Return To Previous Page

Specific 3/32” (2.6mm) 10# (5 kg) cartons

Product 1/8” (3.2mm) 10# (5 kg) cartons
Packaging
Information 5/32” (4.0mm) 10# (5 kg) cartons

3/16” (5.0mm) 10# (5 kg) cartons

7/32” (5.6mm) 10# (5 kg) cartons

1/4” (6.0mm) 10# (5 kg) cartons

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 5 kg Carton 6 60 3,000 lbs (1361 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

56
Tubular Wires Mild Steel
AWS E70T-1

K-70T Return To Previous Page

Specific .045” (1.2mm) 33# (15 kg) spool

Product 60# (27.2 kg) coil
500# (227 kg) drum pack
Packaging
Information 1/16” (1.6mm) 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

5/64” (2.0mm) 60# (27.2 kg) coil

500# (227 kg) drum pack

3/32” (2.4mm) x 60# (27.2 kg) coil

500# (227 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

500 lb 249 kg Drum 2 1,100 lbs (500 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return

Return To
To Previous Page
Catalog Page

57
Tubular Wires Mild Steel
AWS E70T-5M

K-70TB Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product 1/16” (1.6 mm) 60# (27.2 kg) coil
Packaging
Information 3/32” (2.4 mm) x 60# (27.2 kg) coil

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To

Return To Previous
Catalog Page
Page

58
Tubular Wires Mild Steel
AWS E70T-1C/1M, 9C, 9M

K-70ST Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product .052” (1.4 mm) 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 60# (27.2 kg) coil

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To Previous Page

59
Tubular Wires Mild Steel
AWS E70T-1C/1M, 9C/9M

KX-200H Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product .052” (1.4 mm) 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 60# (27.2 kg) coil

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To Previous Page

60
Tubular Wires Mild Steel
AWS E71T-1/-1M

K-71TLF Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product 60# (27.2 kg) coil
500# (227 kg) drum pack
Packaging
Information 1/16” (1.6 mm) 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

5/64” (2.0 mm) 60# (27.2 kg) coil

500# (227 kg) drum pack

3/32” (2.4 mm) x 60# (27.2 kg) coil

500# (227 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

500 lb 249 kg Drum 2 1,100 (500 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

61
Tubular Wires Mild Steel
AWS E71T-1M

K-71TM Return To Previous Page

Specific .030” (0.8 mm) 11# (5 kg), 33# (15 kg), 44# (20 kg) spool
Product .035” (0.9 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

.052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

11 lb 5 kg Spool 200 2,200 lbs (1000 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

44 lb 20 kg Spool 60 2,640 lbs (1197 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

500 lb 249 kg Drum 2 1,100 lbs (500 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To

Return To Previous
Catalog Page
Page

62
Tubular Wires Mild Steel
AWS E71T-1M

K-71T Plus Return To Previous Page

Specific .035” (0.9 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging 60# (27.2 kg) coil
Information 500# (227 kg) drum pack

1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

500 lb 249 kg Drum 2 1,100 lbs (500 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To Previous Page

63
Tubular Wires Mild Steel
AWS E71T-1M

K-71TP Return To Previous Page

Specific .035” (0.9 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging 60# (27.2 kg) coil
Information 500# (227 kg) drum pack

1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool
60# (27.2 kg) coil
500# (227 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

60 lb 27 kg Coil 42 2,520 lbs (1145 kg)

500 lb 249 kg Drum 2 1,100 lbs (500 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To Previous Page

64
Tubular Wires Self Shielded
AWS E71T-GS

K-NGS Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

65
Tubular Wires Self Shielded
AWS E70T-4

K-NGS4 Return To Previous Page

Specific 1/16” (1.6 mm) 33# (15 kg) spool

Product
Packaging
Information

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

66
Tubular Wires Self Shielded
AWS E71T-10

K-NGS10 Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 5/64” (2.0 mm) 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

67
Tubular Wires Self Shielded
AWS E71T-11

K-NGS11 Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 5/64” (2.0 mm) 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

68
Tubular Wires Metal Cored
AWS E70C-3M

KX-70CM Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

69
Tubular Wires Metal Cored
AWS E70C-3C

KX-100 Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product 1/16” (1.6 mm) 33# (15 kg) spool
Packaging
Information

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

70
Tubular Wires Metal Cored
AWS E70C-6M

KX-706M Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

71
Tubular Wires Metal Cored
AWS E70C-6M

KX-706M Plus Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands Return To Previous Page

Tubular Wires Metal Cored Return To Previous Page

Specific .045” (1.2 mm) 10# (4.5 kg), 33# (15 kg) spool
Product .052” (1.4 mm) 10# (4.5 kg), 33# (15 kg) spool
Packaging
Information 1/16” (1.6 mm) 10# (4.5 kg), 33# (15 kg) spool

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 4.5 kg Spool 200 2,000 lbs (906 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

73
Tubular Wires Stainless Steel Return To Previous Page

Specific .045” (1.2 mm) 33# (15 kg) spool

Product 1/16” (1.6 mm) 33# (15 kg) spool
Packaging
Information

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

74
MIG Wires Return To Previous Page

Specific .030” (0.8 mm) x 11# (5 kg), 33# (15 kg), 44# (20 kg) spool
Product .035” (0.9 mm) x 11# (5 kg), 33# (15 kg), 44# (20 kg) spool
Packaging 550# (259 kg) and 900# (408 kg) drum pack
Information
.040” (1.0 mm) x 33# (15 kg), 44# (20 kg) spool
550# (259 kg) and 900# (408 kg) drum pack

.045” (1.2 mm) x 33# (15 kg), 44# (20 kg) spool
550# (259 kg) and 900# (408 kg) drum pack

.052” (1.4 mm) x 33# (15 kg), 44# (20 kg) spool
550# (259 kg) and 900# (408 kg) drum pack

1/16” (1.6mm) x 33# (15 kg), 44# (20 kg) spool

550# (259 kg) and 900# (408 kg) drum pack

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
11 lb 5 kg Spool 5 200 2,200 lbs (1000 kg)

33 lb 15 kg Spool 72 2,376 lbs (1078 kg)

44 lb 20 kg Spool 60 2,640 lbs (1197 kg)

550 lb 249 kg Drum 2 1,100 lbs (500 kg)

900 lb 408 kg Drum 1 900 lbs (900 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

75
TIG Wires Return To Previous Page

Specific .045” (1.2 mm) 10# (5 kg) cartons

Product 1/16" (1.6 mm) 10# (5 kg) cartons
Packaging
Information 3/32” (2.4 mm) 10# (5 kg) cartons

1/8” (3.2 mm) 10# (5 kg) cartons

5/32” (4.0 mm) 10# (5 kg) cartons

3/16” (5.0 mm) 10# (5 kg) cartons

7/32” (5.6 mm) 10# (5 kg) cartons

1/4” (6.0 mm) 10# (5 kg) cartons

Detailed Per Per Total

Packaging Pounds Metric Type Carton Pallet Weight
Information
10 lb 5 kg Carton 6 60 3,000 lbs (1361 kg)

WELDING PRODUCTS

Supplier... For The Highest Demands ReturnTo

Return ToPrevious
Catalog Page
Page

76
Searchable - Interactive
Product Catalog

WELDING PRODUCTS
Supplier... For The Highest Demands
77