Scribd
Upload
76 views

ILUR - Plan 04 Rev 3 Dimensions Stem and Transom (Clinker) Scale 1/10, 1/5 Et 1/2 29 January 2016 François Vivier Architecte Naval

1. The document provides building frame measurements and instructions for constructing the baseline, stem, transom, and keel of a ship. 2. Key details include the building frame baseline at 443, a square transom positioning at 44, a 3 layer laminated false stem, and sculling oar notches marked at port sides. 3. Dimensions are provided for stem layers, strake inner profiles, waterlines, and bevel lines.

Uploaded by

GEORGE KARYDIS
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
76 views

ILUR - Plan 04 Rev 3 Dimensions Stem and Transom (Clinker) Scale 1/10, 1/5 Et 1/2 29 January 2016 François Vivier Architecte Naval

1. The document provides building frame measurements and instructions for constructing the baseline, stem, transom, and keel of a ship. 2. Key details include the building frame baseline at 443, a square transom positioning at 44, a 3 layer laminated false stem, and sculling oar notches marked at port sides. 3. Dimensions are provided for stem layers, strake inner profiles, waterlines, and bevel lines.

Uploaded by

GEORGE KARYDIS
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Keep an extra length and cut afterward

Building frame baseline


443
456 False stem
200
No bevel above sheer-line
Square for transom 44
positioning
C8 Building frame baseline C9
440
13

625
691 700 486

440 436
14

Sternpost
116

Transom base
432
121 Stem: 3 layers 14
Waterline 7 43 Laminated false-stem
15 mm timber
(13 layers 3 mm thick)
406 Strake inner profile
199
Keel 426
15
20
Bevel line

420
Bevel line 16

200 100

Sculling oar notch, port side


100
410
18

93 11 100
91 85 76 64 11
45
560 393
21
4 Stem 3 layers timber 15 mm

574 Waterline Waterline


353
6 50
24
110 104 309
576 133

9 21
20
454
556 Under waterline, the 20 mm fore face
14
375 30 width is progressively reduced to
19 zero at keel
508
17 Keel
99
436 288
18 False keel
346 211
18
154
257 19
108 Bevel for thickness 22 mm
168 74
19 52
20 32

8
11 ILUR - Plan 04 rev 3
34 Transom to be cut as per dimensioned outline
Transom base Dimensions stem and transom (clinker)
87
Scale 1/10, 1/5 et 1/2
29 January 2016
François Vivier Architecte Naval
This drawing is the property of François Vivier Architecte Naval. It shall not be copied, transmitted to any other person, nor published as a whole or partly, without the written consent of the architect.

You might also like