Scribd
Upload
87 views1 page

Wall Sandwich Panel: Wall Panel, Vertical Assembly Joining Panels With Foundation - v1

The document describes the construction of a wall sandwich panel system using butyl mass in the panels' joints, a 15x4 PU gasket, and 4.8x20 screws with EPDM washers. Horizontal insulation is placed between wall panels that are screwed into a reinforced concrete foundation every 300mm, with flashings also screwed to the concrete.

Uploaded by

SACHIDANANDA S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views1 page

Wall Sandwich Panel: Wall Panel, Vertical Assembly Joining Panels With Foundation - v1

The document describes the construction of a wall sandwich panel system using butyl mass in the panels' joints, a 15x4 PU gasket, and 4.8x20 screws with EPDM washers. Horizontal insulation is placed between wall panels that are screwed into a reinforced concrete foundation every 300mm, with flashings also screwed to the concrete.

Uploaded by

SACHIDANANDA S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

wall sandwich panel

butyl mass in panels' joint

15x4 PU gasket
4.8x20 screw with EPDM washer

horizontal insulation

flashing 013

screw to concrete

reinforced concrete foundation

Flashings' fastening - screws (rivets) every 300 mm.

Wall panel, vertical assembly


joining panels with foundation_v1

You might also like