100% found this document useful (1 vote)
870 views

EMC Calibration Report 2 04.05.2019 PDF

i) The Electro Meter Corporation issued a calibration certificate for an AC HV Tester belonging to SQ Wire & Cable Co. Ltd. ii) The certificate provides the calibration results for the AC voltage range of 0kV to 10kV at 50Hz, with measurement uncertainties reported. iii) The calibration confirms the AC HV Tester's performance was within acceptable limits at the time of calibration under the stated environmental conditions.

Uploaded by

jamil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
870 views

EMC Calibration Report 2 04.05.2019 PDF

i) The Electro Meter Corporation issued a calibration certificate for an AC HV Tester belonging to SQ Wire & Cable Co. Ltd. ii) The certificate provides the calibration results for the AC voltage range of 0kV to 10kV at 50Hz, with measurement uncertainties reported. iii) The calibration confirms the AC HV Tester's performance was within acceptable limits at the time of calibration under the stated environmental conditions.

Uploaded by

jamil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

t;1::;l:a?: ).

),r,,
Form No.: FM/22
&g
,,.w. ELECTRO METER CORPORATIOI\i
t. a:a..:a."?|
P.5, C.I.T ROAD, CALIBRATION CERTIFICATE OF:

Certificate No.:
KOLKATA -7OOOI4 AC HV TESI'ER

cc - 2147
CAI-1E84TI8N CERTI FICATE NO.: EMC201 KOL-00008508 ULR N0.: CC2147 L9000077 BSF Page: L/l
1.0 ISSUED TO: sQ wrRE & CABLE C0. LTD.
1.24, KEODHALA, PLOT # 1979- 1 9BO,
MADANPUR, NJARAYANGANJ

1..1 Service Request / Order No.:


1 Description identification of item to be calibrated:
I Name: qC HV TESTER
ll Code No.: M-3
lll Sl. No.: 6415 /78(P) /05-06 IV Make: SA Associates India
Model / Type No 64rs/78(P) VI Range: As Per Calibration Result
vil Sensor: vlll Resolution: As Per Calibration Result
lx Location: Testing Lah
1.3 Appli.rbl. tp".ifi.r,io.r of i,gn,o b"."1@ Not Specified
i.4 Date oi receipt of item: 23-Apr-201.9 L.5 | Date of calibrarion: 23-Apr-20L9
Recommencied date fbr next
:!".6
caiibration: 23-Apr-2020 r.7 F reqqerrcy of calibrarron: t2 months
|

1.8 Envirrinmental condition Iemperature: 25.1'C


during calibration HumidiW: 50.2%o RH
L.9 Basis of calibration; s.o.P/ET13s
2.0 Traceability : Standards Used for Calibration are Traceable to wational/International
Stunau.Or itiofrE-ildffi
1 702 5 Accredited Laboratory.
Name of the standard Recommended date
Sl. No. instrument Range Resolution for
Traceable to /
used (Sl. No./Code Nos.) Certificate Nos.
next calibration
High Voltage Divider with kV
Meter, Make: Udeyraj, Model: VD 0.0L kV upto 10 kV,
1 100 kv (ACIDC) 24-08-L9
ERDA, / RP-1718-
100, Sl. No. 1.4-168, Code No. 0.L kVabove 10 kV 024694,
EMC/HYD/681,,
CATIBF IATION RESULT
Nominal Value on DUC Standard Value Error UIM
Parameter/Range
(kvl (kv) k factor
(kv) (r) (kv)
AC Voltage L 1.00 0.00 0.1183 2.00
2 2.05 -0.05
0kvto5kv 0.1266 2.00
3 3.04 -0.04 0.1392 2.00
50 Hz
4 4.08 -0.08 0.1552 2.00
LC : 0.2 kV
5 5.07 -0.07 0.1552 2.00
1
2.03 -0.03 0.2367 2.00
0kVto10kV 4 4.08 -0.08 0.2532 2.00
6 6.09 -0.09 0.2785 2.00
50 Hz
B 8.16 -0.16 0.3104 2.00
LC : 0.4 kV
10 10.1 -0.1 0.3472 2.00

iiJ The Calibration certificate is issued by Electro Meter Corporation.This certificate refers
only the pi.ti.rfuiit"1nIrU;11itt.a t.'
calibrate.
iii)TheCertificateifproducedforanypurposecommercialorotherwise,,t-,o,tau
certificate or an abstract thereof has to be got specifically approved from the technical and the quality manager
ofthis lab.
tvI Iheresultsinthecalibrationcertificatearevalidatthetimeofandunderthestatedconditionsorlmeasurement.
gcasu.rement unce,rtainW at o/o
Remarks, lnirgx ?S of con[idenqe lev
Performan,ce check has been car
DUC- Device Under Calibration UIM : lJlcertainty ir,,Meajfurement ln.S.-Full Scale Physical status ofthe DUC: 0K
Calibrated by: Prokaslr Ghosh 1,,7 / / Checked & Approved
-- by:r| -''
Dareiz3-04-zo1.s &Jr{ o,i"-'ii iq-iit;
-A0+?,"_.;;.,:;* - -
Reporr lssue Date : 27 -0 + N
I.-l *ttt:,: IJ lrpr {l(!rs{.'rF.tior. <___J ILH C,iili'llttAT!il|'i
END OF CERTIFICATE
Form No': FM/22
ELECTRo METER coRpoRATIoN
i
. .; ;.. : i,:?.
P- 5, C.LT ROAD, ! calrrnauoN
ffiffi
cERrrr..rcArE oF:
KOLKATA - 700014 i wlRE & CABLE SPARKTEsTtiIt
Certificate No":
cc - 2147
CALIS RAT.lSl!:e E RTI FI CAT E N O. : E M C 2 0 1 9 - K0 L- 0 00 0 B 5 1 2
ULR N0.: CC21, 47 19 000 07 7 AgF Paee:1, /'L
ln ISSUED TO: sQ WIRE & CABLE CO" LTD.
124, KEODHALA, PLOT# 1979.1980,
MADANPUR., NARAYANG^ANJ

1.1 Service Request / Order No.:


1..2 Description identificatiqn ofitem to be calibrated;
Name WIRE & CABLE SPARK TESTER Code No.: wcsl'- 01
It Sl. No.: IV Make: Golden Technologies
Model / Type No.: HS-A VI Range: kV to 25 kV
vlt Sensor: VIII Resolution: 1kv
lx Location: Iesting Lab
1 Applicable specifi cation of item to be calibrated: 4 cclracy f pm
1,.4 Date of receipt of item: I 23-Apr-20L 1.5 | Date of calibration: 23-Apr-20L9
Recommended date for next
L.6 23-Apr-202C 1.7 FreqUency of calibration: 1 months
cal ibration: |

1.8 Environmental condition f emperature: 25.L"C


during calibration Humidity: 50.2% RH
1.9 Basis of calibration: s.o.P/ET/3s
2.4 Traceability: Standards Used for Calibration are Traceable to National/International Standards through ISO/lEC;
1702 5 Accredited Laboratory.
Name of the standard Recommended date
Sl. No. instrumont Range Resolution for
Traceablc to /
used (St. No./Code Nos.) Certificate Nos
next calibration
High Voltage Divider with kV
Meter, Make: Udeyraj, Model: VD 0.01 kV upto 10 kV,
1. 100 kv (AclDC) 24-08-t9
ERDA, / RP-1718-
100, SL No. 1,4-168, Code No. 0.1 kV above 10 kV 024694,
EMC/HVD/681,
CALII]RATION RESULT
Nominal Value on DUC Standard Value Error UIM
Parametcr/Ilange k factor
tkv) {kv) (kv) (r) (kv)
AC Voltage 5.0 4.98 0.02 0.t479 2.00
0 kvto 25 kv 10.0 9.95 0.05 0.2578 ?nn
15.0 t4.9 0.L 0.5058 2.00
50 Hz
20.0 19.8 0.2 0.6308 2.00
25.0 ?1"7 0.3 0.6308 2.00
Note: i) Average of5 reading! had been taken in DUC/STD.
iiJ The Calibration certificate is issued by Electro Meter Corporation.This certificate refers only the prrti.utu. itun-, uuUnritt.a to
cal ibra Ie.

iiiJ The Certificate if produced for alty purpose commercial or otherwise, should be reproduced in full.partial p..d*,r." ,h"
certificate or an abstract thereof has to be got specifically approved from the technical and the quality manager of this lab."f
ivl The results in the calibration certificate are valid at the time ofand under the stated conditions on measurenrent.
Measurellent uncertaintv at aOOrOx 95 o/o ofconfidonce leval & at a rovoDoa fa.i^r. Ac par frtilrrrri^- p^-,,
Remarks: Pertormance check has been carried out since the accuracy ofOUC *as not speciflea-
calibration I ulM : uncertainty in Measurement lF.s.-Full scale rethe
DUC- Device urrder
DUC: oK
Calibrated by: Prokash Ghosh Chccked & Approved by:
Date | 23-04-2079 Date | 27 -04-20L9
Report Issue Date :

(
,r r;,-r.i-l i
- :.)
Lab in-r:harge Q;lr
f.rlAt'.,tiAl lilN
Electro Meter CorPrration Et.ECIFOh'tEIER
IND OF CERTIF'ICATE
Form No.: FM/22
ELECTRO METER CORPORATI0I\i
P.5, C.I.T ROAD, CALIBRATION CERTIFICATE OII:

Certificate No.:
KOTKATA .7OOOL4 AC TIV TESTER

f.e. - 2.147
CALI ts RATIQII CERTIFICATE N0.: EMC2 0 1 9-KOL-000085 09 ULR NO.: CC214719 000077R6F Page: l/1-
i.0 iSSUED'iO: sQ wrRE & CABLE CO. rTD.
124, KEODHALA, PLOT#1979. 1980,
MADANPUR, NAMYANG^AN'

1.1 Service Request I 0rder No.:


1."2 Descriptron identlfication ofitem to be calibrared;
Name: AC HV TESTER It Code No.: EM-4
Iti SL No.: tv Make: SA Associates India
Modei / Type No.: 647s/78(P) VI Range: 3kVto35kV
vil Sensor: viii Resolution: 1.5 kV
I Location: Iesting Lab
1 Applicable specification of item to be calibrared' AccrracyTlE.missibGllilil Not Specified
1..4 Date ofreceiptofitem: 23-Apr-2019 1.5 | Date of calibration: 23-Apr-20L9
Recommended date for next
1,.5 23-Apr-202A Frequency of calibration:
calibration: 1.7
|
t2 months
1.8 Environmental condition Temperature: 25.1'C
during calibration Humidiry: 50.270 RH
L.9 Basis of calibration: s.o.P/ETl3s
2.0 Traceability: standards Used for Calibration are Traceable to National/International
standards tt.oSEliEI-
1702 5 Accredited Laboratory.
Name of the standard Recommended date
Sl. No. instrument Range Resolution Traceablc to /
for
used (Sl. No./Code Nos.) Certificate Nos,
next calibration
High Voltage Divider with kV
Meter, Make: Udeyraj, Model: VD 0.01 kV upto 10 kV,
1 100 kv (AClDCl 24-08-L9
ERDA, / RP-1718-
100, Sl. No. 14-1.68, Code No. 0.1 kV above 10 kV 024694,
EMC/HVD/681,

I CALIBRATIONRESULT
Nominal Value on DUC Standard Value Error UIM
Parameter/Range
(kv) k factor
(kv) (kv) (t) (kv)
AC Voltage 7.5 7.39 0.11 0.8876 2.00
0 kVto 35 kV 15 1,4.8 0.2 0.9445 2.00
50 Hz 30 29.7 0.3 1.1,487 2.00
33 32.7 0.3 1.1989 2.00
Note: il Averase oFS eadings had been taken in DUC/STD.
IU I ne Lalltlratton certiticate is isstled by Electro Meter Corporation.This certificate refers only the particular
item submitted to
calibrate.
iiil The Certificate if produced for any purpose commercial or otherwise, should be reproduced in full.partial production of rhe
certlficate or an abstract thereof has to be got specifically approved from the technical and the quality
manager of this lab.

!{easu,rement u.nceftaintv at:ap!r9x ?5


o/o of con{idenc.e
levgl & ar a covera;; fa;toft A; p;;a;lib;l;n Result
Remarks, Performanle check has been cari
DUC- Device Under Calibration I UIfy : Uncertainty in Measurement F.S.-Full Scale Physical status ofthe DUC| OK
Calibrar:ed by: Prokash Ghosh Checked & Approved
Dare i 23-04-201.9 Date t 27 -04-201.9
Report Issue Date | 27 -04

'e,t
f )ffiMr, SAhA
Lntr harge / aA o
Electra Meter Cr:rlrr:ratit,'n E LE C rROME IER CORPORT.\Tr0N

END OF CEIITITTICATE
Form No.: FM/22
,.1.,i1
ETECTRO METER CORPORATION
P- 5, C.tr.T ROAD,
CATIBRATION CERTIFICATI O[':
KOTKATA - 700014.
Certificate No":
cc - 2 47 DIGITAL MICRO OHM MITITI
CALIBR TION CERTIFICATE NO.: EMC2019-KOL-00008S 10 ULR NO.: CC2L4719OO0077T7F li^s";Uz
1.0 ISSUED TO: sQ WIRE & CAIILE CO. tTD.
124, KEODHALA, PIOT#1 97 I -1980,
MADANPUR, NARAYANGAN'

1.1 Seryice Request / Order No.:


1.2 Description identification ofitem to be calibrated:
I Name: DIGITAL MICRO OHM METER .I ll Code No.: DMM. 1
nl Sl. No.:
lv Make: Agronic
'/ Model / Type No.: 53C vl Range: As Per Calibration Result
vlt Sensor: VIII Resolution: As Per Calibration Result
1X Location: Testing Lab
1.3 Applicable specification of item to be calibrated: Accuracy / permissible limit: Not Specified
1.4 Date of receipt of item: 23-Apr-2079 1.5 Date of calibration: 23-Apr-20L9
Recommended date for
1.6 23-Apr-2020 1.7 Frequency of
next calibration: calibration: 72 montl)s
Environmental condition Temperature: 24.9.C
1.8
during calibration Humidity: 52.6% RH
L.9 Basis of calibration: s.o.PlBr/21
2.0 rritueaur[ty : )tanqaros used lor calibration are Traceable to National/International
Standards througlt
ISO/lEC: 17 O25 Accredited Laboratory.

Name of the standard Recommendetl


Sl. No. instrument Range Resolution l'raceable to /
date for
used (Sl. No./Code Nos.) Certificate nos.
next calibration

Micro ohm Calibrator (Ductor


CalJ, Make: Time Electronics, Absolute
1 50pO to 2O 02-05-19
Sl. No. 1085C17, Model: 5070, Calibration, /
Code No. : EMC/DUCTOR/Z 63, 042t604, /

I{igh Precision Decade


Resistance Bcr, Make: Vaiseshika
? Vaiseshika, Model: 7400, Serial 0.01 O to 100 kf} Electron, /
21-08-L9
No: 6473, Code No. YED/NABI,/17-
EMC/DRB/475, lB(Er)/ 46,
,.'r!':"1- v..,:l

&
.'/.:... - t:': .:1L,.\
':;;
Form No.: FM/22
f,,w
t**6 ELECTRO METER CORPORATION
'/ - 4.7
'."':.".
'.,.
P- 5, C.I.T ROAD, CALIBRATION CERTIFICATE OF:
KOLKATA.TOOOL4. DIGITAL MICITO OIIM MITEIT
Certificate No.:
cc - 2147
CALIBMTION CERTIFICATE NO.. EMCZOi g-KOL{OOO85 1O
CALItsRATION RESULT'
ULR N0": CC2147 900007787F W,Tot2-
Parametery' Nominal Value
Rrnoe on DIIf
Std Value Error urM (r) k factor
Ilesistance pO mo pO pO
1999uO 496 0.5 4 2.9508 2.00
L.C:1pf) ooo 1.0 1 5.8059 2.00
L491 1.5 9 8.6810 2.00
rn(} m(} m() mO
19.99mII 4.95 5.0 0.05 0.0729 2.00
L.C :0.01mf) 9.92 10.0 0.08 0.0238 2.00
14.90 15.0 0.10 0.0352 2.00
199.9mO
.r"
49"3 50.0 '0.7 0.0818 2.00
L.C 0.1mO 99.4 100.0 _0.6 0.1500 2.00
1.99.2 200.0 -0.8 0.3000 2.00
1999mf) 496 0.50 -4 0.8180 2.00
L.C:1mO 993 1.00 1 'J..2949 2.00
t49l 1.50 -9 1.8319 2.00
o o o o
19.99A 4.95 5.00 0.05 0.0500 2.00
L.C :0.01O 9.94 10.00 0.06 0.1000 2.00
18.90 19.00 0.10 0.1900 2.00
199.90 49.9 50"00 -0.1 0.5000 2.00
L.C :0.1O 99.7 100.00 -0.3 1.0000 2.00
189.0 190.00 -1.0 1.9000 2.00
ko
D99A 498 0.50 2 0.6467 2.00
L.C :1O 997 1.00 J 0.8204 2.00
1895 1.90 5 7.2489 2.00
ko ko ko
19.99kt) 5.03 5.00 0.03 0.0500 2.00
L.C :0.01kf) 9.98 10.00 -0.02 0.1000 2.00
18.90 19.00 -0.10 0.1900 2.00
Note: iJ Average of5 readings had been taken in STD/DUC
ii)TheCalibrationcertificateisissuedbyElectroMeterCorpor,tio''rt,i'.".tiii.
to calibrate.
Lr., r Ire Lertlrlcate lI proouced
tor any purpose commercial or otherwise, should be reproduced in full.Partial production of
the
e-rtificate or an abstract thereof has to be got specifically approved fromtE :g!]lryul and the quality manager of this lab.
!v.l rrretesurLSlnrnecallDratloncertttlcateareva.[js! a'!_!he!irn!: ofandunderthestatedconditionsonmeasurement.
M"rr,r.u*
DUC: Device Under Calibration
UC was not sDecified b*rffi
UIM: Uncertainty in Measurement F.S : Full Scale Physical status ofthe DUC: OI(
Calibrated by: Prokash Ghosh Checked & Approved by
Date:23-04-20L9 Date127-04-20L9
Report Issue Date: Z?-04-Z0tg/k/

4{"i)
[i. I ClqOrrf rER CORPQRATTOT',t

END O.F CERTIFICATE


lffi
Form No.: FM/22
ELECTRO METER CORPORATION
P- 5, C.I.T ROAD,
CALIBRATION CEIITIFICATE OII:

.".ff-:
cc-zl4r I
KOTKATA -7OOOL4.
MILLION MEGOHM METIIT
CALIBMTION CERTIFICATE NO.: EMC2019-KOL-00008S 1 1 ULRNO.: CC214779OOOO77BB?
lpaee:1/3
1.0 ISSUED TO: sQ wrRE & cABrE CO. r,TD.
124, KEODHALA, PLOT#1 97 9.I9BO,
MADANPUR, NARAYANGANJ

1.1- Service Request / Order No.:


t.2 Description identification ofitem to be calibrated:
i Name: MILLION MEGOHM METER .I lt Code No.: LS.38
lll Sl. No.: s8029022078 lv Make: Sivananda Electronics
Model / Type No.: vi Range: As Per Calibration Result
vll Sensor: vln Resolution: As Per Calibration Result
tx Location: Testing Lab
1.3 Applicable specification of item to be calibrated: Accuracy permissible limit:
/ Not Specified
1.4 Date of receipt of item: 23-Apr-2019 1-.5 Date of calibration: 23-Apr-201.9
Recommended date for
1.6 23-Apr-2020 1.7 Frequency of calibration:
next calibration: L2 months

Environmental condition Temperature: 24.8C


1.8
during calibration Humidity: 54.60/o RH
L.9 Basis of calibration: s.o.P/Er /07
2.0 Traceability : Standards Used for Calibration are Traceable to National/International Standards
through
ISO/IEC: !7 O25 Accredited Laboratory.

'Name
of the standard Ilecommended
SI. No. instrument Range Resolution date for
Traceable to /
used (Sl. No./Code Nos.) Certificatc Nos.
next calibration

High Stability Decade Megohm


Box, Make: Vaiseshika, Model 0.1 MO to 10000 EMC [Kolkata),
1
No, 8400, Serial No. 6068, MO 01-06- 19 / EMC/124/06-
Code No. EMC/Yais/1!, 2018,

Digital Multimeter, Make:


Fluke, Model - 87 lV, Sl. No. As Per Calibration EMC
2 As Per Calibration
440009L252. Code No. 13 - 10- 19 IKolkata]/EMC/
: Result Result
EMC/FLUKE/28 162/10-201.8
;i ;1i'i t;:i:,:.:,,

!:w
":i;,!

Form No.: FM/22


ELECTRO METER CORPORATION
P- 5, C.I.T ROAD, CALIIIRATION CERTIFICATE OF:
KOLKATA -7AOOL4. MITLION MEGOHM METIII
Certificate No.;
cc-2147
CALIBRATION CERTIFICATE NO.: EMC201S-KOL-000085 ULR NO.: CC2747 1900007788P
11 Page: 2 Of-3
CATIBRATION RESIULT I
Parameter/ Nominal Value
Rrnop an fIIIC
Std Value Error UIM (r) k factor
Resistance M.F. =1/5
MO MO MO MO
0M0 to 200M0/100V 5 1.0 0.0 0.0231 2.00
Knob Multiplier=1 10 2.2 -0.2 0.0462 2.00
20 4.5 -0.5 0.0924 2.00
100 20.2 -0.2 0.4623 2.00
1000 200.5 -0.5 4.8055 2.00
M.F.=2
MO MO MO MO
0Mr) to 2000 M0/100V 5 10.3 -0.3 0.2312 2.00
Knob Multiplier=10 10 19.5 0.5 0.4623 2.00
20 38.6 'J..4
0.9240 2.00
100 194.6 5.4 4.8055 2.00
1 000 1987.3 1.2.7 L6t.1.487 2.00
M.F.=20
MO MQ MO MO
0M0 to 20000 M0/100V 5 99.6 0.4 2.3095 2.00
Knoh Multiplier=100 10 192.8 7.2 4.8055 2.00
Cal up to 2000M0 20 386.5 13.5 9.3474 2.00
100 7956.2 43.8 167.t487 2.00
STD. Output Voltage : 19.50 v
M.F.=1
MO MO MO MO
5 5.3 -0.3 0.115 5 2.00
0Mr) to 1000MO/500 V 10 9.9 0.1 0.2309 2.00
Knob Multiplier=1 20 L9.9 0.1 0.4623 2.00
100 100.2 -0.2 2.3095 2.00
1 000 995.5 4.5 23.3843 2.00
Note: Calibration point marked with on f*l are not accredited bv NABL
DUC: Device Under Calibration UIM: Uncertainty in Measurement F.S : Full Scale Physical status ofthe DUC: OK
Calibrated by: Prokash Ghosh Checked & Approved by
Date:23-04-2019 Date:27-04-20t9

scitr.r,:\ sr\HA
'-/ t', l\
,-\

Lab in-r:ha.qa Et.E C reni,xE rEIi C;lqfr0ki\rl.;\l


Llectrt; Mef +r Jcrnor.r
I i,.>n
Form No.: FM/Zz
ELECTRO METER CORPORATION
P- 5, C.I.T ROAD, CALIBRATION CERTIFICATE OF:
KOLKATA .700014. MILLION MEGOHM METER
Certificate No.:
CC-2L+7
CALIBRATI0N CERTIFICATE NO.: EMCZ0 1 9-KOL-000085 1 1 ULR N0.: CC2147 190000ZTBBp Page: 3 Of-3
CALIBRATION RESULT
Parameter/ Nominal Value
on DIIf
Std Value Error urM (t) k factor
Resistance M.F.=L0
MO MO MO MO
0M0 to 10000 MO/500 V 5 50.3 -0.3 1_1549 2.00
Knob Mulriplier=10 10 99.7 0.3 2.3095 2.00
20 1.99.4 0.6 4.8055 2.00
100 999.2 i 0.8 23.3843 2.00
1000 9987,8 1.2.2 573.6423 2.OO
M.F.=100
MO MO MO MO
0M0 to100000 Mo/s00 V 5 500.4 -0.4 11.6922 2.00
Knob Mulriplier=100 10 999.4 0.6 23.3843 2.00
Cal up to 10000M0 +
20 2001.3 - 1.3 1.92.7924 2.00
100 10005.7 -5.7 780.4265 2.00
_ STD. Output Voltage : 4l86.68 V
Note: il Average of 5 re:adinss had been tal<en in STD/l-llIC
iiJTheCalibrationcertificateisissuedbyEIectrovt"t..co.R
to calihrate.
iiiJ The certificate if produced for any purpose commercial or otherwise,
should be reproduced in full.partial production of the
certificate or an abstract thereof has to be got specifically approved from
the technical and the quality manager of this lab.

y] Calib.rtion poi not acc.edited bv Xr,AgL


YeasTeTen=t
unce.taiJrty,al appro, qS
Remarks: Performance check has of DUC was nor .,_,".if "tt
DUC: Device Under Calibration
Calibrated by; prokash Ghosh
ulM: uncertainty in Measurement F.S : Full Scale Physical status ofthe DUC: 0K -
Checked &Approved by
Datei 23-04-2019
Datei 27-04-2019
Report Issue Date; 27-04-2019

l.ilr ir-ch;'.rIi,
Hicctr-c !'f ctc: ii)itrrf .' : r'il'1-irill I i-t C rRO14E IIi{ C..]r-iiilRATr .)N

END OF CERTIFICA] E

You might also like