Scribd
Upload
55 views

Managing Large Projects PDF

Uploaded by

gilbertomjc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Managing Large Projects PDF

Uploaded by

gilbertomjc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Managing Large Projects

Power Analytics Corporation


10805 Rancho Bernardo Road, Suite 270
San Diego, California 92127
U.S.A.
U.S. Toll Free Phone: 800-362-0603
Fax: 858-675-9724
www.PowerAnalytics.com

©Copyright Power Analytics Corporation 2012


All rights reserved
Managing Large Projects

IMPORTANT NOTE: Power Analytics Corporation’s software products are tools intended to be
used by trained professionals only. They are not substitutes for your professional judgment or for
independent verification and testing of results as they pertain to your specific application. Use of
all Power Analytics Corporation software products is governed by the terms and conditions of the
End-User License Agreement (“EULA”) you accepted when purchasing and installing the
software. You must comply with these terms and conditions in applying the instructional material
in this manual. If you do not have or are unfamiliar with the contents of your EULA for this
software, you should request, read, and understand a copy of your EULA before proceeding.

Please accept and respect the fact that Power Analytics Corporation has enabled you to make an
authorized disk as a backup to prevent losing the contents that might occur to your original disk drive. DO
NOT sell, lend, lease, give, rent or otherwise distribute Power Analytics Corporation programs / User's
Guides to anyone without prior written permission from Power Analytics Corporation.

All Rights Reserved.


No part of this publication may be reproduced without prior written consent from
Power Analytics Corporation.

Managing Large Projects

To change the input data for large projects:

The classical approach is to use the DesignBase GUI and from the keyboard to change the
network component data: feeder, power transformer, generator, etc.

A useful and fast method in changing the project data is to use the Text Editor, as shown in the
figures below. The procedure is recommended for large projects – above 2,000 buses.

The following procedure is recommended:

1. Open the project:

2
Managing Large Projects

2. Within the DesignBase software, launch the DesignBase Job File Editor (Text Editor; the
user may also use WINEDSA):

3
Managing Large Projects

3. Within the Job File Editor (Text Editor), select the network component you need to
change the input data. It can be a bus or a branch.

a. Select as an example, Buses:

4
Managing Large Projects

b. Select the induction motor, you want the change the input data, and then click
“Edit”, as shown in the figure capture below:

5
Managing Large Projects

c. Click “Navigate” button:

d. The program will display the following dialog window:

e. In this case, select “By Bus Type” and then click “OK”:

f. Use the scroll arrow to navigate throughout the induction motors. Select
the motor you want to change the data, and then change the input data: Short
circuit or/and Load Flow data:

6
Managing Large Projects

g. Navigate throughout the induction motors by using the Scroll Arrow:

7
Managing Large Projects

h. Once the task is completed, click “OK” button, as shown in the figure capture
below:

8
Managing Large Projects

You might also like