5G Indoor Blade Power

EPS100D-N01D1

Introduction

EPS100D-N01D1 is a new type of embedded DC power system

designed by Huawei to support 5G communication. It supports DC
input. With the features of high power density, supporting intelligent
voltage boosting by cooperating with Huawei main equipment[1],
EPS100D-N01D1
easy installation and maintenance and full digitalization, it is suitable
for scenarios of expanding one band of 5G in existing wireless site
that power capacity is enough but remote power supply is required.

Features
 Supports shunt intelligent voltage boosting (-57VDC to -72VDC[2])
when providing power for AAU5613 or AAU5272, meeting the
remote power supply requirements of large-power AAU[3]

 Wide operating temperature range:－40℃ to ＋65℃ (55℃ to 65℃

output derating to 80%)

 Hot-swappable rectifier & converter

 19-inch standard rack installation or wall mounted, easy deployment

 Compact structure, save space and installation cost

 High efficiency: converter efficiency ≥98%

 Remote administrable with dry contact or RS485 serial port

communication

Scenario

 Expanding 5G on existing wireless site

 New-built outdoor 5G wireless site

[1] For specific main equipment models, please contact Huawei sales staff.
[2] The default output voltage range is -57Vdc to -63Vdc. If need open the range of -63Vdc to -72Vdc, please contact Huawei sales personnel to submit
customized requirements.
[3] Example: supporting common cable (8.2mm2) to supply power for 5G AAU (maximum power consumption of 1200W). The farthest power supply distance is
not less than 90m, covering most 5G AAU power supply scenarios.
 Specifications

Product Type EPS100D-N01D1

Dimension (W × D × H) 442mm × 330mm × 43.6mm

Weight <6kg (without converter)

Cooling mode Natural heat dissipation

System
Installation mode 19-inch rack installation or wall mounted

Cable routing Front-in, front-out

Maintenance mode Front side O&M

Protection level IP20

Input voltage -40VDC to -60VDC

DC Input Input terminal 2×100A OT terminal (input current ≤ 150A)

Lightning protection 2kV/4kV

48VDC output port: -42VDC to -57VDC, default value: -53.5VDC

60VDC output port: -57VDC to -72VDC, default value: -57VDC
Output voltage (Remark: When used with Huawei main equipment, the 3 channels of 60V output port can realize
intelligent voltage boosting.When used with third-party main equipment, the power cannot
communicate with the main equipment normally, and the default output voltage is -57VDC[4])

DC Output Capacity Maximum output capacity is 6kW

5×33A terminals in total

Output distribution 48VDC output port (bypass): -42VDC to -57VDC, default value: -53.5VDC
60VDC output port: -57VDC to -72VDC, default value: -57VDC

SPD 10/20kA (8/20μs)

Model C6030G1 (DC-DC converter module)

Rated power 2000W

Dimension (W × D × H) 68mm × 282.5mm × 40.8mm

Converter
Working temperature -40℃ to +75℃

Maximum Efficiency ≥98%

Weight ≤2kg

Model SMU11D

Signal input 1 battery temperature, 1 door magnet

Monitoring Alarm output 2 dry contact

Communication ports 1 port for RS485 (Northbound), 1 port for RS485 (Southbound), 3 ports for PLC communication

Mobile APP Support, 1 Bluetooth interface

–40℃ to +65℃ (Degraded to 80% from 55°C to 65°C)

Operating temperature (from 2000 to 4000m, the maximum working temperature will decrease 1℃ for every 200m
increasing of altitude)
Environment Storage temperature -40% to +70%

Operating humidity 5% - 95% (non-condensing)

Altitude 0 - 4000m

Optional Support -57VDC to -72VDC voltage output by software configuration, suitable for high power load
Dynamic boosting
Software Features and long distance power supply

[4] The output voltage value can be manually set. Considering the safety of product application, the current voltage range is 57VDC - 63VDC,
and it is not open to 72VDC

Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Huawei Industrial Base
Ltd.
Bantian Longgang
General Disclaimer
Shenzhen 518129, P.R. China
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and
operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to Tel: +86-755-28780808
differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only
www.huawei.com
and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.