Scribd
Upload
42 views

Instruction For Connecting Device With Computer by LAN

1. Save two files to a USB drive, install an APK file called "V2.3.1.6" on a device, and uninstall the original "MIPS" software by going through settings, apps, selecting "MIPS", and uninstalling it. Then install a new APK called "V2.3.4" on a Windows computer. 2. Log into a website using Chrome browser which will direct to a login page with username "admin" and password "123456" leading to a homepage. 3. Connect the device to the same network as the computer via WiFi or cable, access a software, input the password "123456" to access settings, select "Login

Uploaded by

Oscar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

Instruction For Connecting Device With Computer by LAN

1. Save two files to a USB drive, install an APK file called "V2.3.1.6" on a device, and uninstall the original "MIPS" software by going through settings, apps, selecting "MIPS", and uninstalling it. Then install a new APK called "V2.3.4" on a Windows computer. 2. Log into a website using Chrome browser which will direct to a login page with username "admin" and password "123456" leading to a homepage. 3. Connect the device to the same network as the computer via WiFi or cable, access a software, input the password "123456" to access settings, select "Login

Uploaded by

Oscar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

1.

Please save the 2 files in your USB first :

2. Install first APK file “V2.3.1.6” apk on the device ;

3. Before installing the new APK , need to uninstall the original “MIPS” software , steps as
below :

Step 1: Settings ;
Step 2: Apps ;

Step 3: Single click “MIPS” ;


Step 4: UNINSTALL ;

Step 5: Find the new APK in your USB , and single click it, it will install ;

Install the APK on the device ;

4. Install the “ V2.3.4 “ software on your Windows system computer ;

When this icon shows on the desk, it’s installed successfullly.


5. Copy this website , use Chrome Browser to sing in ;

6. You will go to the below page :

Login name : admin


Login password : 123456

You will go to the Homepage :


7. Connecting the device with your computer :

Step 1: Connect the device with the same network as your computer : WIFI or cable network
both are okay ; Connect WIFI in Settings ;

8. Then go back to the software :


9. Click central button of the mouse, and input the Password: 123456, enter the setting interface;

10. Choose “Login Management ” :


11. Enter your computer IP to connect :

12 . Methods to find Windows IP , normally IPv4 ;


When it connected successfully , you can see the below page on the device :

13 . After connecting , you will find the device on your computer Smart Pass Software :
Can operate as as the manual . you can find the device on the Device list , online status.
14. If need to connect with the email for alarming when there’s abnormal temperature , you
can set up your email in System Management – System Settings :

For more email setting introduction , please wait for further updates .

You might also like