Scribd
Upload
85 views

Ericsson Huawei Parameter Mapping

The document contains a table mapping parameter names to their status, value ranges, actual value ranges, units, default values, and meanings. The parameters include common access control class, minimum uplink level on candidate cell, and cell reselect penalty time which are mapped and have value ranges of 0-63, 0-31, and access control levels respectively. Special access control class is also mapped and determines whether special access users are allowed to access the network.

Uploaded by

Amir Esparham
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
85 views

Ericsson Huawei Parameter Mapping

The document contains a table mapping parameter names to their status, value ranges, actual value ranges, units, default values, and meanings. The parameters include common access control class, minimum uplink level on candidate cell, and cell reselect penalty time which are mapped and have value ranges of 0-63, 0-31, and access control levels respectively. Special access control class is also mapped and determines whether special access users are allowed to access the network.

Uploaded by

Amir Esparham
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Parameter Name MAPPING STATUS GUI Value Range

L0_FORBID,
L1_FORBID,
L2_FORBID,
L3_FORBID,
L4_FORBID,
Common Access Control Class MAPPED
L5_FORBID,
L6_FORBID,
L7_FORBID,
L8_FORBID,
L9_FORBID

Min UL Level on Candidate Cell MAPPED 0~63

Cell Reselect Penalty Time MAPPED 0~31

L11_FORBID,
L12_FORBID,
Special Access Control Class MAPPED L13_FORBID,
L14_FORBID,
L15_FORBID
Actual Value Range Unit Default Value Meaning

L0_FORBID-
0&L1_FORBID-
0&L2_FORBID-
L0_FORBID, L1_FORBID,
0&L3_FORBID-
L2_FORBID, L3_FORBID, Level of common access control, used for
0&L4_FORBID-
L4_FORBID, L5_FORBID, None load control, allowing or forbidding the access
0&L5_FORBID-
L6_FORBID, L7_FORBID, of some users of common access levels
0&L6_FORBID-
L8_FORBID, L9_FORBID
0&L7_FORBID-
0&L8_FORBID-
0&L9_FORBID-0

If the uplink received signal level of a


neighbor cell is greater than "Min UL Level on
0~63 dB 0 Candidate Cell" plus "Min Access Level
Offset", the neighbor cell can be listed in the
candidate cell queue for handover.

Cell Reselect Penalty Time (PT) is used to


ensure the safety and validity of cell
0~31 s 0 reselection because it helps to avoid frequent
cell reselection. For details, see GSM Rec.
05.08 and 04.08.

This parameter is used for load control. It


L11_FORBID, L11_FORBID-
determines whether the users of special
L12_FORBID, 0&L12_FORBID-
access class are allowed to access the
L13_FORBID, None 0&L13_FORBID-
network. Value 1 indicates that access is not
L14_FORBID, 0&L14_FORBID-
allowed. Value 0 indicates that access is
L15_FORBID 0&L15_FORBID-0
allowed.
HW_Baseline Equivalent E/// Para

ACC

BSRXMIN

PT

ACC

You might also like