Part Lists DC506-606-706
Part Lists DC506-606-706
INDEX PAGE
Introductions 2
1. Driver 5
2. Paper Transport 8
3. IIT 45
4. ROS 51
5. Xerographic 52
6. Development 55
7. Registration 60
8. Fuser 78
9. Air System 84
10. Electrical 87
11. Cover 92
12. DADF 95
13. OCT and SCT 107
14. Finisher 109
15. Tò mò thì Click
16. MF Chassis 134
17. HCF 137
18. Label 147
19. Screws 148
20. Parts Navigation 150
Terminol
ogy & Description
Symbols
Informs you that the adjustment procedurefor the part is described in Chapter 4 Repair and Adjustment.
Informs you that the removal, installationand replacement procedures for the part are described in Chapter4 Repair and Adjustment.
Informs you that the removal, installation,replacement and adjustment procedures for the part are describedin Chapter 4 Repair and Adjustment.
This is indicated on the upper left or upperright of the illustration to show the item represents the assemblyincluding the part. The example shows Item 3 is the assembly
3 4-10 ofItem 4 through 10.
(1/4PCS) Informs you that four identical parts areinstalled but that only one of them is shown in the illustration.
-- This symbol in the PART NO. column showsthe part is not managed as a spare part.
(P/O Item This symbol in the DESCRIPTION column showsthe part is not managed as a single piece of spare part, but asa part of the assembly. The example shows the part is a part
5) ofAssembly Item 5.
(New) This term in the DESCRIPTION column showsthe new part is interchangeable with the old one. Unless otherwisespecified or there are no particular reasons, order the old
(Old) part.
(Alternat
e) This term in the DESCRIPTION column showseither one of the parts can be used.
This symbol shows the whole area of theframed illustration is modified by the number in the circle. Thearea has the modified configuration.
This symbol shows the whole area of theframed illustration has not been modified by the number in the circle.The area still has the previous configuration.
The Item pointed to by this symbol in theillustration is modified by the number in the circle. The item hasthe modified configuration.
The Item pointed to by this symbol in theillustration has not been modified by the number in the circle.The item still has the previous configuration.
with 5V This symbol in the DESCRIPTION column showsthe part is modified by the number. The part has the modified configuration.
(w/o 5V) This symbol in the DESCRIPTION column showsthe part has not been modified by the number. The part still hasthe previous configuration.
Note
Refer to PL2.1 for Tray 1 Assembly.
Note
Refer to PL2.1 for Tray 1 Assembly
Note
Refer to PL2.1 for Tray 2/3/4 Assembly
Note
Refer to PL2.8 for Tray 1 Feeder Assembly.
Note
Refer to PL2.8 for Tray 1 Feeder Assembly.
Note
Refer to PL2.8 for Tray 1 Feeder Assembly.
*1 When the Nudger/Feed Rolland Retard Roll(PL2.12)are required, place an
order for the following kit part: FeederRepair Kit 600K 85720
Note
Refer to PL2.8 for Tray 1 Feeder Assembly.
*1 When the Nudger/Feed Rolland Retard Roll(PL2.12)are required, place an
order for the following kit part: FeederRepair Kit 600K 85720
Note
Refer to PL2.8 for Tray 2/3/4 Feeder Assembly.
PART LISTS DC560/606/706
2. Paper Transportion Page 21
PL2.14 Tray2/3/4 Feeder-Motor, Solenoid
ITEM PARTS No. DESCRIPTION A.C.
1 9E 61310 Spring 50R1
2 7E 31090 Gear(13T) 50R2
3 7E 41620 Gear(18T) 50R3
4 7E 41610 Gear(20T) 50R4
5 7K 85670 Gear(24T) 50R5
6 -- Motor Bracket 50R6
7 127K 29050 Tray 2/3/4Feed/Lift Motor 50R7
8 121K 22190 Tray 2/3/4Nudger Solenoid 50R8
9 12E 94330 Link 50R9
10 15K 16680 Bracket Assembly(Item11-14) 50RB
11 -- Bracket 50RC
12 -- Gear(31T) 50RD
13 -- Spring 50RE
14 -- Coupling 50RF
15 5K 81230 One-way Clutch 50RG
16 6K 82160 Shaft 50RH
17 13E 84630 Bearing 50RJ
18 -- Screw 50RK
Note
Refer to PL2.8 for Tray 2/3/4 Feeder Assembly.
PART LISTS DC560/606/706
2. Paper Transportion Page 22
PL2.15 Tray2/3/4 Feeder-Nudger/Feed Roll
ITEM PARTS No. DESCRIPTION A.C.
1 15K 45571 Nudger RollSupport(Item2-10) 50S1
2 -- Support 50S2
3 38E 23480 Guide 50S3
4 59K 16560 Nudger RollTray 2 *1(REP2.15.1) 5041
- Nudger Roll Tray 3*1(REP2.15.1) 5051
- Nudger Roll Tray 4*1(REP2.15.1) 5061
5 6E 44440 Shaft 50S4
6 7E 64240 Gear(17T) 50S5
7 7E 64230 Gear(13T) 50S6
8 7E 64210 Gear(17T) 50S7
9 7E 64220 Gear(14T) 50S8
10 13K 81340 Bearing 50S9
11 809E 26631 Spring 50SB
12 7E 31120 Gear(16T) 50SC
13 7E 64200 Gear(18T) 50SD
14 5K 82970 One-way Clutch 50SE
15 -- Feed Roll Tray 2*1(REP2.15.1) 5042
- Feed Roll Tray 3 *1(REP2.15.1) 5052
- Feed Roll Tray 4 *1(REP2.15.1) 5062
16 -- Bearing 50SF
17 -- Plate 50SG
18 -- Bearing 50SH
19 11K 94861 Lever(Nudger) 50SJ
20 13K 81330 Bearing 50SK
Note
Refer to PL2.8 for Tray 2/3/4 Feeder Assembly.
*1 When the Nudger/Feed Rolland Retard Roll (PL2.16)are required, place an
order for the following kit part: Feeder Repair Kit 600K 85720
PART LISTS DC560/606/706
2. Paper Transportion Page 23
PL2.16 Tray2/3/4 Feeder-Retard Roll
ITEM PARTS No. DESCRIPTION A.C.
1 1K 71092 Lower FrameAssembly(Item2-9) 50T1
2 -- Lower Frame 50T2
3 -- Support 50T3
4 -- Shaft 50T4
5 7E 56210 Gear(15T) 50T5
6 5E 83320 Collar 50T6
7 5K 81600 Friction Clutch 50T7
8 -- Shaft 50T8
9 -- Spring 50T9
10 -- Retard Roll Tray2 *1(REP2.16.1) 5043
- Retard Roll Tray 3*1(REP2.16.1) 5053
- Retard Roll Tray 4*1(REP2.16.1) 5063
Note
Refer to PL2.8 for Tray 2/3/4 Feeder Assembly.
*1 When the Nudger/Feed Rolland Retard Roll (PL2.15)are required, place an
order for the following kit part: Feeder Repair Kit 600K 85720
PART LISTS DC560/606/706
2. Paper Transportion Page 24
PL2.17 Take Away Roll1
ITEM PARTS No. DESCRIPTION A.C.
1 -- Bearing 50V1
2 59K 16190 Take AwayRoll1 5035
3 7E 40450 Gear 50V2
4 54K 16841 Take AwayChute1(Item5-14,17) 50V3
5 15K 22420 Support 50V4
6 809E 15000 Spring 50V5
7 -- Chute 50V6
8 59E 94940 Pinch Roll 50V7
9 -- Shaft 50V8
10 130K 86962 Feed Out Sensor1 50V9
11 -- Bracket 50VB
12 162K 18651 Wire Harness 50VC
13 31E 92790 Arm 50VD
14 121K 11770 Tray1 TakeAway Solenoid 50VE
15 38E 87840 Guide 50VF
16 15K 22440 Plate 50VG
17 809E 15010 Spring 50VH
PART LISTS DC560/606/706
2. Paper Transportion Page 25
PL2.18 Take Away Roll2-4
ITEM PARTS No. DESCRIPTION A.C.
1 54K 7213 Upper VerticalChute(Item2-4) 50W1
2 -- Chute 50W2
3 130K 86761 Feed Out Sensor2 50W3
4 -- Wire Harness 50W4
5 54K 7224 Lower VerticalChute(Item6-9) 50W5
6 -- Chute 50W6
7 130E 81600 Feed Out Sensor3 50W7
8 120E 12021 Actuator 50W8
9 -- Wire Harness 50W9
10 54K 9112 Lower VerticalChute 50WB
11 7E 41420 Gear 50WC
12 -- Bearing 50WD
13 59K 15710 Vertical Roll 50WE
14 59K 15720 Take AwayRoll2 5045
15 59K 15720 Take AwayRoll3 5055
16 59K 15720 Take AwayRoll4 5065
RH Cover InterlockSwitch and Invert
17 15K 22132 End Sensor(Item18-21) 50WF
18 -- Bracket 50WG
19 130K 86771 Invert EndSensor 50WH
20 110E 94770 R/H InterlockSwitch 50WJ
21 -- Wire Harness 50WK
22 15K 22410 Bracket 50WL
23 48E 46660 ConnectorCover 50WM
24 48E 46670 Cover 50WN
25 913W 01415 Double Connector 50WP
PART LISTS DC560/606/706
2. Paper Transportion Page 26
PL2.19 Right Cover
ITEM PARTS No. DESCRIPTION A.C.
1 802K 14690 Right Cover(Item3-23) 50X1
2 -- Chute Assembly(Item3-22) 50X2
3 -- Support 50X3
4 11E 98961 Lever 50X4
5 3E 32690 Latch 50X5
6 9E 73130 Spring 50X6
7 -- Bracket 50X7
8 3K 83581 Hinge(Upper) 50X8
9 3K 83590 Hinge(Lower) 50X9
10 9E 73140 Spring 50XB
11 11E 98972 Lever 50XC
12 9E 73151 Spring 50XD
13 54K 7191 Vertical RollChute(Item14-16) 50XE
14 -- Chute 50XF
15 59E 92140 Pinch Roll 50XG
16 13E 85971 Bearing 50XH
Take AwayRoll 2/3/4 Chute(Item18-
17 54K 7201 20) 50XJ
18 -- Chute 50XK
19 59E 92140 Pinch Roll 50XL
20 13E 85971 Bearing 50XM
21 3E 36530 Knob 50XN
22 9E 78640 Spring 50XP
23 -- Right Cover 50XQ
24 3E 34841 Hinge 50XR
25 127K 29570 Paper CoolingFan 1 50XS
26 127K 29570 Paper CoolingFan 2 50XT
27 54E 16521 Fan Chute1 50XV
28 54E 16531 Fan Chute2 50XW
Note
Refer to PL2.20 for MultiTray Feeder Assembly.
Note
*1When the Nudger/Feed Roll and Retard Roll(PL2.31) are required, place an
order for thefollowing kit part: Paper Feed Repair Kit 600K 73181
Note
*1When the Retard Roll and Nudger/Feed Roll(PL2.29) are required, place an
order for thefollowing kit part: Paper Feed Repair Kit 600K 73181
Note
*1When the Feed/Nudger Roll and Pad(PL2.36) are required, place an order for
thefollowing kit part: MSI Feeder Repair Kit 600K 85880
Note
*1When the Feed/Nudger Roll and Pad(PL2.35) are required, place an order for
thefollowing kit part: MSI Feeder Repair Kit 600K 85880
PART LISTS DC560/606/706
2. Paper Transportion Page 44
PL2.37 Nudger Support, Chute
ITEM PARTS No. DESCRIPTION A.C.
1 68K 20441 MSI SupportAssembly(Item2-10) 51V1
2 -- Support 51V2
3 130E 82690 MSI/HCF PreRegi Sensor 51V3
4 -- Chute 51V4
5 -- Shaft 51V5
6 -- Screw 51V6
7 -- Harness Assembly 51V7
8 -- Spring 51V8
9 12K 93990 Link Assembly 51V9
10 7E 62810 Gear(19T/31T) 51VB
11 54K 17220 Chute Assembly 51VC
PART LISTS DC560/606/706
3. IIT Page 45
PL3.1 Platen Glass and IIT PWB
ITEM PARTS No. DESCRIPTION A.C.
1 90K 92751 Platen Glass(REP3.1.1)(FX) 1021
- 90K 92850 Platen Glass(REP3.1.1)(AP) 1021
- 90K 92860 Platen Glass(REP3.1.1)(TFX) 1021
- 90K 92870 Platen Glass(REP3.1.1)(FXK) 1021
2 15E 73770 Right SidePlate 10B1
3 -- Screw 10B2
4 -- IIT Cover 10B3
5 -- Screw(M3X6) 10B4
6 -- Harness Cover 10B5
7 160K 67240 IIT PWB(REP3.1.2) 1066
8 110K 94900 Platen InterlockSwitch 10B5
9 -- Bracket 10B6
10 130K 55571 Carriage HomeSensor 10B7
11 130K 86550 Platen AngleSensor 1063
12 160K 67620 Carriage MotorDrive PWB 1121
13 90K 92337 DADF PlatenGlass 2242
14 49E 11650 Support 10B8
15 49E 8410 Support 10B9
PART LISTS DC560/606/706
3. IIT Page 46
PL3.2 Lens Assembly and CCD PWB
ITEM PARTS No. DESCRIPTION A.C.
1 -- CCD Cover 10C1
2 -- Screw(M3X6) 10C2
3 62K 10190 Lens Asssembly(Item4,5) 10C3
4 -- Lens Base(REP3.2.1) 10C4
5 160K 67650 CCD PWB(REP3.2.1) 1110
6 -- Plate 10C5
7 -- Screw 10C6
8 117K 29940 FPC CCD 10C7
9 13K 86531 Platen APSSensor(FX) 1061
Platen
- 130K 57600 APSSensor(FX:Option,AP,TFX,FXK) 1061
10 162K 18980 Harness Assembly(APS) 10C7
PART LISTS DC560/606/706
3. IIT Page 47
PL3.3 Carriage Motor and Carriage Cable
ITEM PARTS No. DESCRIPTION A.C.
1 127K 16272 Carriage MotorAssembly(Item 2,3) 1041
2 127K 16282 Carriage Motor 10D1
3 -- Bracket 10D2
4 9E 72900 Spring 10D3
5 423W 34553 Belt 10D4
6 6K 83001 Capstan Shaft 10D5
7 413W 10350 Bearing(Ball) 10D6
8 20E 17191 Pulley 10D7
9 12K 93050 Rear CarriageCable(REP3.3.1) 10D8
10 12K 93060 Front CarriageCable(REP3.3.1) 10D9
11 20K 94970 Pulley 10DB
12 9E 53480 Spring 10DC
13 19E 30990 Spring Clip 10DD
PART LISTS DC560/606/706
3. IIT Page 48
PL3.4 Full Rate Carriage and Half Rate Carriage
ITEM PARTS No. DESCRIPTION A.C.
Full RateCarriage Assembly(Item2-9)
1 41K 93322 (ADJ3.4.1) 1010
2 122K 92700 Exposure Lamp(REP3.4.1) 1013
3 41K 93332 Full RateCarriage 1.00E+02
4 62E 93781 No.1 Mirror 1.00E+03
5 9E 90750 Clip 1.00E+04
6 118E 98890 Insulator 1.00E+05
7 105E 6340 Lamp PowerSupply 1065
8 117E 14960 Lamp WireHarness(REP3.4.2) 1.00E+06
9 32E 98560 Guide 1.00E+07
10 19E 22830 Holder 1.00E+08
11 32E 98570 Guide 1.00E+09
Half RateCarriage Assembly(Item13-
12 41K 93351 15) (ADJ3.4.1) 1020
13 62E 94890 No.3 Mirror 1022
14 9E 90750 Clip 1.00E+10
15 -- Half Rate Carriage 10EB
16 63E 93461 Tape 10EC
PART LISTS DC560/606/706
3. IIT Page 49
PL3.5 Cover
ITEM PARTS No. DESCRIPTION A.C.
1 802K 16430 Platen Cover(Item2-7) 2001
2 48E 37930 Platen Cover 20B1
3 2E 68640 Cover(ORG) 20B2
4 3E 36500 Handle 20B3
5 36K 91280 Counter Balance 2005
6 -- Screw 20B4
7 4E 99250 Platen Cushion(REP3.5.1) 2003
8 15K 34400 Bracket 20B5
9 15K 94930 Bracket 20B6
10 802K 14020 Top Cover 20B7
Main HeaterRod(730W)(FX,TFX)
16 126K 11371 (REP8.3.3) 4311
Main HeaterRod(952W)(AP,FXK)
- 126K 12120 (REP8.3.3) 4311
Sub HeaterRod(730W)(FX,TFX)
17 126K 11380 (REP8.3.3) 4312
Sub HeaterRod(952W)(AP,FXK)
- 126K 12130 (REP8.3.3) 4312
18 108E 93411 Fuse 43DE
PART LISTS DC560/606/706
8. Fuser Page 81
PL8.4 Lower Fuser Assembly and PressureRoller
ITEM PARTS No. DESCRIPTION A.C.
1 59K 17830 Pressure Roller(REP8.4.1) 4322
2 13E 85510 Ball Bearing 4.30E+02
3 59K 4710 Oil Roller 4372
4 13E 85520 Bearing 4.30E+03
5 -- Lower Fuser Assembly(Item6-12) 4.30E+04
6 42K 91500 Cleaner Assembly 4.30E+05
7 11K 94950 Rear Lever 4.30E+06
8 9E 71900 Spring 4.30E+07
9 11K 94960 Front Lever 4.30E+08
10 -- Bracket 4.30E+09
11 32E 99370 Guide 4.30E+10
12 -- Lower Fuser Frame 43EB
13 54E 10635 Inlet Chute 43EC
14 -- Bracket 43ED
PART LISTS DC560/606/706
8. Fuser Page 82
PL8.5 Fuser Exit Assembly
ITEM PARTS No. DESCRIPTION A.C.
1 1K 48813 Fuser ExitAssembly(Item2-6) 43F1
2 - - Exit Chute 43F2
3 22K 56770 Pinch RollerAssembly 43F3
Note
*1When Items 2 to 5 of PL9.3 and Ozone Filter(PL11.1) are required,
place an order for thefollowing kit part: PL11.1 FilterKit 600K85790
PART LISTS DC560/606/706
10. Electrical Page 87
PL10.1 Electrical 1 of 5(Front)
ITEM PARTS No. DESCRIPTION A.C.
1 -- Switch Cover 71B1
2 -- Bracket 71B2
3 110K 7880 Main PowerSwitch 71B3
4 -- Plate 71B4
5 910W 00122 Front DoorInterlock Switch 7121
6 -- Bracket 71B5
7 113K 81580 Outlet(FX,TFX) 71B6
- 113E 22760 Outlet(AP) 71B6
- 113E 22770 Outlet(FXK) 71B6
8 160K 67400 Download I/FPWB 71B7
9 -- Screw 71B8
Note
*1When the Ozone Filter and Items 2 to 5 of PL9.3 are required, place an order for
thefollowing kit part: PL9.3 FilterKit 600K85790
Note
*1When the Labels are required, place an order for the following kitparts:
DADF Label Kit 91K71781(FX)
DADF Label Kit 91K 71900(AP)
DADF Label Kit 91K 72020(TFX)
DADF Label Kit 91K 72030(FXK)
PART LISTS DC560/606/706
13. OCT and SCT Page 107
PL13.1 Simple Catch Tray(SCT)
ITEM PARTS No. DESCRIPTION A.C.
Khi làm tài liệu này, một nhân viên của FUJI XEROX
ngủ gật nên đã nhảy cóc từ phần 14 lên thẳng phần
16. Bởi vậy nên phần 15 không có gì. Xem tạm hình
của tớ nhé !
Lưu ý, tài liệu này khi xem thì đừng có thay đổi nhé
kẻo nhầm hết cả mã part đấy !
Chúc mọi người luôn vui vẻ !