Book Number: TDB 295

Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Wireline Releasable Overshot

The Weatherford BDK is a wireline tool designed for retrieving equipment where
the fish neck has parted or is no longer serviceable.
The robust design of the overshot allows for prolonged and severe jarring, as is
often the case during fishing operations.
The tool is released by downward jarring whereby pins are sheared allowing the
inner mandrel to travel up, pulling the collet fingers from the tapered bottom sub
housing.

Features
Shear Releasing.
Available with integral bell guide option.
Wide range of slips available.

Applications
In operation were a pulling tool cannot engage due to wear or damage.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-1- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Technical Specifications
Nominal Size ------ 2.00" 2.50" ----- -----
Tool OD 1.75" 1.77" 1.85" 2.25" 2.30" 2.625" 2.650"
Fish Neck Dia 1.375” 1.375” 1.375” 1.750” 1.750” 1.750” 1.750”
Sucker Rod 15/16”-10 (A3) 15/16”-10 (A3) 1 1/16”-10 (A4) 1 1/16”-10 (A4) 1 1/16”-10 (A4)
Connection Sizes
Quick Connects 1 ½” NOM 1 ½” NOM 1 7/8” NOM 1 7/8” NOM 1 7/8” NOM
0.500" 0.500" 0.500" 0.500" 0.500" 0.500" 0.500"
Slip Range
1.375" 1.375" 1.375" 1.750" 1.750" 1.750" 2.125"
Thread
Make-up Length 20.18" 20.18" 20.18" 20.5" 20.5" 20.68" 22.4"
QRJ
Reach 3.08” 3.07” 2.97” 2.97” 2.97” 3.19” 3.19”
Strength SWL (lb) 17,820 20,000 42,360 41,850 58,640 72,000 46,040
Standard Service Yield (lb) 19,800 22,250 47,070 46,500 65,160 80,000 51,160
Sucker Rod UTS (lb) 25,460 28,300 59,900 59,820 83,780 102,200 65,780
Strength SWL (lb) 17,820 19,130 30,800 41,850 52,200 52,200 46,040
H2S Service Yield (lb) 19,800 21,250 34,230 46,500 58,000 58,000 51,160
Sucker Rod UTS (lb) 25,460 27,320 42,790 59,820 73,000 73,000 65,780
Strength SWL (lb) 8,910 8,910 8,910 13,860 13,860 13,860 13,860
Standard Service Yield (lb) 9,900 9,900 9,900 15,400 15,400 15,400 15,400
QRJ UTS (lb) 12,600 12,600 12,600 19,600 19,600 19,600 19,600
Strength SWL (lb) 17,820 20,000 42,360 41,850 58,640 93,600 46,040
Standard Service Yield (lb) 19,800 22,250 47,070 46,500 65,160 104,000 51,160
HD QRJ UTS (lb) 25,460 28,300 59,900 59,820 83,780 131,600 65,780
Strength SWL (lb) 17,820 19,130 30,800 41,850 58,640 67,500 46,040
H2S Service Yield (lb) 19,800 21,250 34,230 46,500 65,160 75,000 51,160
HD QRJ UTS (lb) 25,460 27,320 42,790 59,820 83,780 94,000 65,780
Strength SWL (lb) 17,820 20,000 42,360 41,850 58,640 90,000 46,040
Standard Service Yield (lb) 19,800 22,250 47,070 46,500 65,160 100,000 51,160
Trinity UTS (lb) 25,460 28,300 59,900 59,820 83,780 127,400 65,780
Strength SWL (lb) 17,820 19,130 30,800 41,850 58,640 64,800 46,040
H2S Service Yield (lb) 19,800 21,250 34,230 46,500 65,160 72,000 51,160
Trinity UTS (lb) 25,460 27,320 42,790 59,820 83,780 91,000 65,780
Strength SWL (lb) 17,820 20,000 42,360 41,850 58,640 73,000 46,040
Standard Service Yield (lb) 19,800 22,250 47,070 46,500 65,160 92,000 51,160
QLS UTS (lb) 25,460 28,300 59,900 59,820 83,780 117,000 65,780
SWL = Safe Working Load – Maximum recommended tensile load which can be applied to the tool.
Yield Strength – Load which will cause permanent deformation to the tool, possibly affecting functioning.
UTS = Ultimate Tensile Strength – Load capable of fracturing tool.

NOTE:
Collets are available in 1/8” increments as standard or can be manufactured to suit customer requirements

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-2- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Technical Specifications
Nominal Size 3.00" 3.50" 4.00" 5.00"
Tool OD 2.74" 3.35" 3.80" 4.15"
Fish Neck Dia 1.750” 2.312” 1.750” 2.312”
Sucker Rod 1 1/16”-10 (A4) 1 1/16”-10 (A4) 1 9/16”-10 (A6) 1 1/16”-10 (A4) 1 9/16”-10 (A6)
Connection Sizes
Quick Connects 1 7/8” NOM 1 7/8” NOM 2 ½” NOM 1 7/8” NOM 2 ½” NOM
0.500" 0.500" 0.500" 0.375"
Slip Range
2.125" 2.750" 3.000" 3.500"
Thread 24.43” 24.5" 28.3" 29.1"
Make-up Length 22.6"
QRJ ---------- 26.61” 30.53” 31.4”
Reach 3.82” 3.82” 3.82” 3.50” 4.10”
Strength SWL (lb) 72,000 72,000 91,120 72,000 122,400
Standard Service Yield (lb) 80,000 80,000 101,240 80,000 136,000
Sucker Rod UTS (lb) 102,200 102,200 128,850 102,200 160,770
Strength SWL (lb) 52,200 ---------- 66,270 52,200 89,010
H2S Service Yield (lb) 58,000 ---------- 73,630 58,000 98,900
Sucker Rod UTS (lb) 73,000 ---------- 92,030 73,000 123,670
Strength SWL (lb) 13,860 ---------- 31,860 13,860 31,680
Standard Service Yield (lb) 15,400 ---------- 35,200 15,400 35,200
QRJ UTS (lb) 19,600 ---------- 44,800 19,600 44,800
Strength SWL (lb) 74,030 ---------- 91,120 93,600 122,400
Standard Service Yield (lb) 82,260 ---------- 101,240 104,000 136,000
HD QRJ UTS (lb) 104,700 ---------- 128,850 131,600 160,770
Strength SWL (lb) 53,850 ---------- 66,270 67,500 89,010
H2S Service Yield (lb) 59,830 ---------- 73,630 75,000 98,900
HD QRJ UTS (lb) 74,790 ---------- 92,030 94,000 123,670
Strength SWL (lb) 74,030 ---------- 91,120 90,000 122,400
Standard Service Yield (lb) 82,260 ---------- 101,240 100,000 136,000
Trinity UTS (lb) 104,700 ---------- 128,850 127,400 160,770
Strength SWL (lb) 53,850 ---------- 66,270 64,800 89,010
H2S Service Yield (lb) 59,830 ---------- 73,630 72,000 98,900
Trinity UTS (lb) 74,790 ---------- 92,030 91,000 123,670
Strength SWL (lb) 74,030 ---------- 91,120 73,000 122,400
Standard Service Yield (lb) 82,260 ---------- 101,240 92,000 136,000
QLS UTS (lb) 104,700 ---------- 128,850 117,000 160,770
SWL = Safe Working Load – Maximum recommended tensile load which can be applied to the tool.
Yield Strength – Load which will cause permanent deformation to the tool, possibly affecting functioning.
UTS = Ultimate Tensile Strength – Load capable of fracturing tool.

NOTE:
Collets are available in 1/8” increments as standard or can be manufactured to suit customer requirements

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-3- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Operation
Sitting down the toolstring weight onto the fish operates the Weatherford BDK Releasable Overshot; this will
allow the slips to expand around the fish. When the toolstring is picked up the slips will engage the fish.
The Overshot is released by downward jarring whereby pins are sheared allowing the inner mandrel to travel
up pulling the collet fingers from the tapered bottom sub housing.

Maintenance
As the Tool is subject to heavy jarring during a fishing operation, it is recommended to disassemble the fishing
tool after each operation and check for any signs of wear or damage. Use light general grease when
assembling.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-4- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Disassembly
1 Remove the Grubscrew (7) and unscrew Top Sub (1) from the
Intermediate Sub (6).
2 Remove the Grubscrew (2) from the Spring Retainer (3). Unscrew the
Spring Retainer from the Mandrel (9).
NOTE: The spring preload will be reduced as the Retainer unscrews from the
mandrel.
3 Slide the Mandrel Spring (4) off the Mandrel (9).
4 Holding the Intermediate Sub (6), unscrew the Grubscrew (8). Unscrew the Bottom
Sub (11) from the Intermediate Sub (6).
5 Remove the Shear Pin (5) from the Intermediate Sub (6) and Mandrel (9). Slide the
Intermediate Sub (6) off the Mandrel (9).
6 Holding the Mandrel (9), remove the Slips (15) from the Core (12).
Unscrew the Grubscrew (10) from the Mandrel (9).
7 Unscrew the Core (12) from the Mandrel (9) using the slots.
8 Remove the Slip Spring (13) and Spring Retainer (14) from the Core (12).
9 The tool is now disassembled.

Assembly
1 Holding the Intermediate Sub (6). Insert the Mandrel (9) into the
Intermediate Sub (6) and align the shear pinholes.
2 Insert the Shear Pin (5) into the shear holes.
3 Slide the Mandrel Spring (4) over the Mandrel (9).
4 Screw the Spring Retainer (3) onto the Mandrel (9) down to the stop
and insert the Grubscrew (2).
NOTE: The spring has to be partly compressed before thread
engagement of the retainer can be made.
5 Screw the Top Sub (1) onto the Intermediate Sub (6) and insert the
Grubscrew (7).
6 Slide the Spring Retainer (14) over the Core (12), then slide the Slip
Spring (13) over the Core (12) up to
the Spring Retainer (14).
7 Screw the Core assembly into the Mandrel (9) and lock in position with
the Grubscrew (10).
8 Insert the Slips (15) onto the Core assembly.
9 Screw the Bottom Sub (11) onto the Intermediate Sub (6) and lock in
position with the Grubscrew (8).
10 The tool is now ready for use.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-5- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Part Numbers

Item Description 1.75” OD 1.77” OD 1.85” OD Qty

Top Sub – Sucker Rod 11876-A3 6485-A3 12258-01-A3
Top Sub – QRJ 11876-B3 6485-B3 12258-01-B3
1 Top Sub – HD QRJ 11876-C3 6485-C3 12258-01-C3 1
Top Sub – Trinity 11876-T3 6485-T3 12258-01-T3
Top Sub – QLS 11876-Q3 6485-Q3 12258-01-Q3
2 Grubscrew G250NF025 G250NF025 G250NF025 1
3 Spring Retainer 6486 6486 6486 1
4 Mandrel Spring 5949 5949 5949 1
5 Shear Pin Dia 0.18” x 1.50” Lng Dia 0.18” x 1.50” Lng Dia 0.18” x 1.50” Lng 1
6 Intermediate Sub 11877 6488 12258-02 1
7 Grubscrew G010NF025 G250NF025 G250NF025 1
8 Grubscrew G250NF018 G250NF018 G250NF018 1
9 Mandrel 6489 6489 6489 1
10 Grubscrew G250NF050 G250NF050 G250NF050 1
11 Bottom Sub 11878 6495 12258-03 1
12 Core 6490 6490 6490 1
13 Slip Spring 9145 9145 9145 1
14 Spring Retainer 6515 6515 6515 1
Slips – 0.500” – 0.750” 9142 9142 9142
Slips – 0.750” – 0.875” 9141 9141 9141
Slips – 0.875” – 1.000” 9140 9140 9140 AS
15
Slips – 1.000” – 1.125” 9139 9139 9139 REQ

Slips – 1.125” – 1.250” 9138 9138 9138

Slips – 1.250” – 1.375” 9137 9137 9137

Assembly Number – Sucker Rod 11875-A3 6484-A3 12258-A3

Assembly Number – QRJ 11875-B3 6484-B3 12258-B3
Assembly Number – HD QRJ 11875-C3 6484-C3 12258-C3
Assembly Number – Trinity 11875-T3 6484-T3 12258-T3
Assembly Number – QLS 11875-Q3 6484-Q3 12258-Q3

Standard Redress Kit Number 11875-RD 6484-RD 12258-RD

Recommended Spares Kit Number 11875-RS 6484-RS 12258-RS
HD Redress Kit Number 6991-RD2 6991-RD2 6991-RD2
Add suffix H to Part/Assembly Numbers for H2S Service
Standard Redress Kit consists of items – 2, 5, 7, 8 & 10
Recommended Spares Kit consists of item – 4, 13 & 15
For details on HD QRJ Redress Kit, please refer to page 10.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-6- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Part Numbers
Item Description 2.25” OD 2.30” OD 2.625” OD Qty
Top Sub – Sucker Rod 6474-A4 12259-01-A4 11880-A4
Top Sub – QRJ 6474-B4 12259-01-B4 11880-B4
1 Top Sub – HD QRJ 6474-C4 12259-01-C4 11880-C4 1
Top Sub – Trinity 6474-T4 12259-01-T4 11880-T4
Top Sub – QLS 6474-Q4 12259-01-Q4 11880-Q4
2 Grubscrew G250NF037 G250NF037 G250NF037 1
3 Spring Retainer 6475 6475 6475 1
4 Mandrel Spring 5983 5983 5983 1
5 Shear Pin Dia 0.18” x 2.00” Lng Dia 0.18” x 2.00” Lng Dia 0.18” x 2.00” Lng 1
6 Intermediate Sub 6477 12259-02 11881 1
7 Grubscrew G250NF025 G250NF025 G250NF025 1
8 Grubscrew G250NF025 G250NF025 G250NF037 1
9 Mandrel 6478 6478 6478 1
10 Grubscrew G250NF062 G250NF062 G250NF062 1
11 Bottom Sub 7860 12259-06 11882 1
12 Core 6479 6479 6479 1
13 Slip Spring 7864 7864 7864 1
14 Spring Retainer 7892 7892 7892 1
Slips – 0.500” – 0.625” 7865 7865 7865
Slips – 0.625” – 0.750” 7866 7866 7866
Slips – 0.750” – 0.875” 7867 7867 7867
Slips – 0.875” – 1.000” 7868 7868 7868
Slips – 1.000” – 1.125” 7869 7869 7869 AS
15
Slips – 1.125” – 1.250” 7887 7887 7887 REQ

Slips – 1.250” – 1.375” 7888 7888 7888

Slips – 1.375” – 1.500” 7889 7889 7889
Slips – 1.500” – 1.625” 7890 7890 7890
Slips – 1.625” – 1.750” 7891 7891 7891

Assembly Number – Sucker Rod 6473-A4 12259-A4 11879-A4

Assembly Number – QRJ 6473-B4 12259-B4 11879-B4
Assembly Number – HD QRJ 6473-C4 12259-C4 11879-C4
Assembly Number – Trinity 6473-T4 12259-T4 11879-T4
Assembly Number – QLS 6473-Q4 12259-Q4 11879-Q4

Redress Kit Number 6473-RD 12259-RD 11879-RD

Recommended Spares Kit Number 6473-RS 12259-RS 11879-RS
HD QRJ Redress Kit Number 6992-RD2 6992-RD2 6992-RD2
Add suffix H to Part/Assembly Numbers for H2S Service
Standard Redress Kit consists of items – 2, 5, 7, 8 & 10
Recommended Spares Kit consists of items – 4, 13 & 15
For details on HD QRJ Redress Kit, please refer to page 10.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-7- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Part Numbers
3.35” OD
Item Description 2.65” OD 2.74” OD 3.35” OD Qty
(1.75” F/N)
Top Sub – Sucker Rod 12257-03-A4 6462-A4 10027-A6 00800354
Top Sub – QRJ 12257-03-B4 6462-B4 10027-B6 ----------
1 Top Sub – HD QRJ 12257-03-C4 6462-C4 10027-C6 ---------- 1
Top Sub – Trinity 12257-03-T4 6462-T4 10027-T6 ----------
Top Sub – QLS 12257-03-Q4 6462-Q4 10027-Q6 ----------
2 Grubscrew G250NF037 G250NF037 G250NF031 G250NF031 1
3 Spring Retainer 6463 6463 10028 10028 1
4 Mandrel Spring 5962 5962 10029 10029 1
5 Shear Pin 6464 Dia 0.25” x 2.38” Lng Dia 0.31” x 3.00” Lng Dia 0.31” x 3.00” Lng 1
6 Intermediate Sub 12257-02 6465 10031 10031 1
7 Grubscrew G250NF019 G250NF025 G250NF025 G250NF025 1
8 Grubscrew G250NF019 G250NF025 G250NF025 G250NF025 1
9 Mandrel 6466 6466 10032 10032 1
10 Grubscrew G250NF050 G250NF050 G250NF062 G250NF062 1
11 Bottom Sub 12257-01 6472 10033 10033 1
12 Core 6467 6467 10034 10034 1
13 Slip Spring 5962 5962 10035 10035 1
14 Spring Retainer 6513 6513 10036 10036 1
Slips – 0.500” – 0.625” 10198 10198 10037 10037
Slips – 0.625” – 0.750” 10199 10199 10043 10043
Slips – 0.750” – 0.875” 10200 10200 10044 10044
Slips – 0.875” – 1.000” 10201 10201 40045 40045
Slips – 1.000” – 1.125” 10130 10130 10046 10046
Slips – 1.125” – 1.250” 10131 10131 10110 10110
Slips – 1.250” – 1.375” 10132 10132 10111 10111
Slips – 1.375” – 1.500” 10133 10133 10112 10112
Slips – 1.500” – 1.625” 10134 10134 10113 10113 AS
15 REQ
Slips – 1.625” – 1.750” 6468 6468 10114 10114
Slips – 1.750” – 1.875” 6469 6469 10115 10115
Slips – 1.875” – 2.000” 6470 6470 10116 10116
Slips – 2.000” – 2.125” 6471 6471 10117 10117
Slips – 2.125” – 2.250” N/A N/A 10038 10038
Slips – 2.250” – 2.375” N/A N/A 10039 10039
Slips – 2.375” – 2.500” N/A N/A 10040 10040
Slips – 2.500” – 2.625” N/A N/A 10041 10041
Slips – 2.625” – 2.750” N/A N/A 10042 10042

Assembly Number – Sucker Rod 12257-A4 6461-A4 10026-A6 00800347

Assembly Number – QRJ 12257-B4 6461-B4 10026-B6 ----------
Assembly Number – HD QRJ 12257-C4 6461-C4 10026-C6 ----------
Assembly Number – Trinity 12257-T4 6461-T4 10026-T6 ----------
Assembly Number – QLS 12257-Q4 6461-Q4 10026-Q6 ----------

Standard Redress Kit Number 12257-RD 6461-RD 10026-RD 10026-RD

Recommended Spares Kit Number 12257-RS 6461-RS 10026-RS 10026-RS
HD QRJ Redress Kit Number 6992-RD2 6992-RD2 6993-RD2 ----------
Add suffix H to Part/Assembly Numbers for H2S Service
Standard Redress Kit consists of items – 2, 5, 7, 8 & 10
Recommended Spares Kit consists of items – 4, 13 & 15
For details on HD QRJ Redress Kit, please refer to page 10

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-8- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Part Numbers
Item Description 3.80” OD 4.15” OD Qty
Top Sub – Sucker Rod 10732-A4 10075-A6
Top Sub – QRJ 10732-B4 10075-B6
1 Top Sub – HD QRJ 10732-C4 10075-C6 1
Top Sub – Trinity 10732-T4 10075-T6
Top Sub – QLS 10732-Q4 10075-Q6
2 Grubscrew G250NF025 G250NF050 1
3 Spring Retainer 10733 10076 1
4 Mandrel Spring 8809 4768 1
5 Shear Pin Dia 0.31” x 3.38” Lng Dia 0.31” x 3.63” Lng 1
6 Intermediate Sub 10736 10079 1
7 Grubscrew G250NF025 G250NF025 1
8 Grubscrew G250NF025 G250NF025 1
9 Mandrel 10737 10080 1
10 Grubscrew G250NF062 G250NF025 1
11 Bottom Sub 10738 10081 1
12 Core 10739 10082 1
13 Slip Spring 10035 10035 1
14 Spring Retainer 10741 10084 1
Slips – 0.375” – 0.500” N/A 10085
Slips – 0.500” – 0.625” 10742 10086
Slips – 0.625” – 0.750” 10743 10087
Slips – 0.750” – 0.875” 10744 10088
Slips – 0.875” – 1.000” 10745 10089
Slips – 1.000” – 1.125” 10746 10090
Slips – 1.125” – 1.250” 10747 10091
Slips – 1.250” – 1.375” 10748 10092
Slips – 1.375” – 1.500” 10749 10093
Slips – 1.500” – 1.625” 10750 10094
Slips – 1.625” – 1.750” 10751 10095
Slips – 1.750” – 1.875” 10752 10096
AS
15 Slips – 1.875” – 2.000” 10753 10097
REQ
Slips – 2.000” – 2.125” 10754 10098
Slips – 2.125” – 2.250” 10755 10099
Slips – 2.250” – 2.375” 10756 10100
Slips – 2.375” – 2.500” 10757 10101
Slips – 2.500” – 2.625” 10758 10102
Slips – 2.625” – 2.750” 10759 10103
Slips – 2.750” – 2.875” 10760 10104
Slips – 2.875” – 3.000” 10761 10105
Slips – 3.000” – 3.125” N/A 10106
Slips – 3.125” – 3.250” N/A 10107
Slips – 3.250” – 3.375” N/A 10108
Slips – 3.375” – 3.500” N/A 10109

Assembly Number – Sucker Rod 8842-A4 8843-A6

Assembly Number – QRJ 8842-B4 8843-B6
Assembly Number – HD QRJ 8842-C4 8843-C6
Assembly Number – Trinity 8842-T4 8843-T6
Assembly Number – QLS 8842-Q4 8843-Q6

Standard Redress Kit Number 8842-RD 8843-RD

Recommended Spares Kit Number 8842-RS 8843-RS
HD QRJ Redress Kit Number 6992-RD2 6993-RD2
Add suffix H to Part/Assembly Numbers for H2S Service
Standard Redress Kit consists of items – 2, 5, 7, 8 & 10
Recommended Spares Kit consists of items – 4, 13 & 15
For details on HD QRJ Redress Kit, please refer to page 10.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
-9- For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.

 Book Number: TDB 295
Product: Overshot
Revision - Date: 1 – 06-06-2005

Flow Control & Well Servicing Systems

Spares Ordering Information

When ordering a Redress or Recommended Spares Kit, please specify relevant number from parts list.
When ordering individual spares, please specify
Tool OD: …………………………
Assembly Number: …………………………
Serial Number: …………………………
Service: …………………………

Spare Part:
Drawing Identification Number: …………………………
Description: …………………………
Part Number for required spares: …………………………
Qty: …………………………

For example, to order a spare Slip (0.750”) for a 1.75” OD Releasable Overshot (Standard Service) -

Tool OD: 1.750”

Assembly Number: 11875-A3
Serial Number: 48622-1-1-1
Service: Standard Service

Spare Part:
Drawing Identification Number: Item 15
Description: Slip (0.750”)
Part Number for required spares: 9142
Qty: 1

Quick Connect Redress Kits

The spares for the Quick Connects are not supplied as part of a standard redress or recommended spares kit.
These spares are required to be ordered separately, as they do not need changing out on a regular basis.
Type of Connection Redress Kit consists of -
HD QRJ Button, Spring & Pin

NOTE: QRJ/QLS/Trinity Redress Kits are not offered, as only male connection is available on the Overshot
and this does not contain any parts to be redressed.

To order Quick Connect Spares, please specify

Connection (Size& Type): …………………………
Service: …………………………
Redress Kit Part Number: …………………………
For example, to order spares for a 1 ½” HD QRJ Connection, Standard Service –
Connection (Size & Type): 1.500” OD HD QRJ
Service: Standard Service
Redress Kit Part Number: 6991-RD2
NOTE: Failure to supply complete information may lead to delays/wrong parts being dispatched.

Weatherford products and services are subject to Weatherford’s standard terms and conditions.
- 10 - For more information concerning the full line of Weatherford’s product and services, please
contact your authorised Weatherford representative. Unless noted otherwise, trademarks and
services marks noted herein are the property of Weatherford.

http://www.weatherford.com/ ©2002 Weatherford. All rights reserved.